Brother P Touch Pt 65 Users Manual

Brother-Pt-2030Ad-Owner-S-Manual brother-pt-2030ad-owner-s-manual

Brother-Pt-2030Vp-Owner-S-Manual brother-pt-2030vp-owner-s-manual

Brother-Pt-2100-Owner-S-Manual brother-pt-2100-owner-s-manual

Brother-Pt-2200-Owner-S-Manual brother-pt-2200-owner-s-manual

Brother-Pt-2110-Owner-S-Manual brother-pt-2110-owner-s-manual

: Brother Brother-P-Touch-Pt-65-Users-Manual-212975 brother-p-touch-pt-65-users-manual-212975 brother pdf

Open the PDF directly: View PDF .
Page Count: 4

Care and precautions

1) Use a soft, dry cloth to clean the machine.

2) Use only

AA-size (LR6) alkaline batteries

.

3) Do not expose the machine or the tape cassette to high

temperatures, high humidity, or excessive dust.

4) If you do not intend to use the machine for an extended

period of time, remove the batteries.

5) Do not touch the tape cutter button while printing or

replacing the cutter unit.

6) Do not touch the cutter blade.

7) Do not block the tape exit slot.

8) Do not put labels in your mouth.

9) Do not stick labels onto skin.

10)If the machine “locks up” (i.e., it does not respond

when a key is pressed), press to turn off the

machine; then, while holding down and ,

press once to turn the machine on again.

FCC NOTICE

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one

or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician

for help.

– Changes or modifications not expressly approved by Brother

Industries, Ltd. could void the user’s authority to operate the

equipment.

How to make a label

1) Insert the batteries.

2) Insert a tape cassette.

3) Turn on the P-Touch by pressing .

4) Type in and format the text.

Your text can be up to 55 characters long including spaces. See

“Advanced functions” for more details on formatting your text.

5) Print the label by pressing .

Before printing, be sure that the back cover is attached,

otherwise the label cannot be printed.

6) Cut off the label.

The tape cutter button is equipped with a safety mecha-

nism. Do not try to force the cutter button since it cannot

be operated if no cassette is installed and the back cover is

removed. If the cutter button is forcefully operated, correct

printing may no longer be possible.

7) Peel off the backing.

Changing the batteries

1) Remove the back cover by pressing in on the rough

area at the top end of the machine and pulling off the

back cover.

2) If batteries are already installed, remove them.

Before removing the batteries, pull out the tape cas-

sette if one is installed.

3) Insert

six new AA-size (LR6) alkaline batteries

in the

direction shown by the illustration on the bottom of the

battery compartment. The positive end of the three bat-

teries in the bottom row point downward, while the

positive end of the top three batteries point in the

opposite direction.

Back cover

When inserting new batteries, always insert them pos-

itive end first. When removing old batteries, always

remove them negative end first.

Always replace all six batteries at the same time with

brand new ones.

4) Attach the back cover by inserting the two hooks on the

bottom end of the back cover into the slots on the bot-

tom end of the machine, then pushing down firmly on

the cover until it snaps into place.

Changing the tape cassette

1) Remove the back cover by pressing in on the rough

area at the top end of the machine and pulling off the

back cover.

2) If a tape cassette is already installed, pull it straight out

and remove the paper tab from the new tape cassette.

Make sure that the end of the tape in the new cassette

feeds under the tape guides.

The tape that is provided with the P-touch

Home&Hobby is a 13.3’ long (4m) starter tape. Tapes

available for purchase are 26.2’ (8m) long.

3) Insert the tape cassette, making sure that it clicks into place.

Check that the cassette fits properly around the two

metal guides in the cassette compartment.

4) Attach the back cover by inserting the two hooks on the

bottom end of the back cover into the slots on the bot-

tom end of the machine, then pushing down firmly on

the cover until it snaps into place.

5) Feed the tape by holding down and pressing ,

then cut the tape by pressing in on the tape cutter button.

The amount of tape remaining is visible through the

window in the back of the P-Touch.

When the usable tape is finished, green ribbon appears.

Changing the cutter unit

When the cutter becomes blunt and ceases to cut the tape

cleanly, replace it.

1) Remove the back cover and the tape cassette.

2) Grasp the tab on the top of the cutter unit and pull out

the cutter, taking care not to touch the blade.

3) Grasp the tab on the new cutter unit and insert it as

shown below.

Cleaning the print head

If dust accumulates on the print head, blank horizontal

lines may appear through the printed label. If this hap-

pens, clean the print head as follows:

1) Turn off the P-Touch.

2) Remove the back cover and the tape cassette.

3) Use a dry cotton swab to gently wipe the print head

and rubber pinch roller with an up-and-down motion.

4) Re-insert the tape cassette, attach the back cover, turn

on the machine, hold down and press to feed

the tape, and then try printing.

5) If blank lines remain in the printed label, repeat steps 1

through 4, this time using a cotton swab dipped in iso-

propyl (rubbing) alcohol.

Accessories

Most retailers and distributors carry a full line of tape cas-

settes. If you wish to order accessories for your P-Touch

direct from Brother, please refer to the “Accessory Order

Form” included separately, or visit our web site

“http://www.brothermall.com”.

Tape guides

Metal guides

Tape cutter

button

CAUTION

• When changing the cutter unit, be sure not to

touch the cutter blade.

• Keep the cutter unit in a safe place that is out of

the reach of small children.

The following accessories are available:

Tape cassettes 1/2” (12 mm)

$9.99 (SRP) 3/8” (9 mm)

$8.99 (SRP)

Black on silver

Black on gold

Black on blue

Black on green

Black on pink

M-931

M-831

M-531

M-731

M-E31

M-921

M-821

M-521

M-721

M-E21

Black on white M-231

Replacement cutter

unit TC7 $9.95 (SRP)

Carrying case 6991 $17.99

Cutter unit

Tape exit slot

Tab

Thermal print head Rubber pinch

roller

With the P-Touch HOME&HOBBY, you can make labels quickly and easily. Simply switch on the P-Touch, type in your text, then

print out your label. You can choose from five different text sizes, nine character styles, and seven framing settings. The text can be

printed on either one or two lines and can include accented characters and special symbols. In addition, nine preset layout formats are

available for you to type in and print out labels quickly. Six tape color (white, silver, gold, blue, green and pink) and two tape widths

(3/8” (9 mm) and 1/2” (12 mm)) are available for creating personalized labels.

LA3085001

Printed in China

®

Please read this instruction leaflet before using the P-Touch. Keep

it in a handy place for future reference.

Use only tape cassettes bearing the logo with this machine.

TAPE

Care and precautions

1) Use a soft, dry cloth to clean the machine.

2) Use only

AA-size (LR6) alkaline batteries

.

3) Do not expose the machine or the tape cassette to high

temperatures, high humidity, or excessive dust.

4) If you do not intend to use the machine for an extended

period of time, remove the batteries.

5) Do not touch the tape cutter button while printing or

replacing the cutter unit.

6) Do not touch the cutter blade.

7) Do not block the tape exit slot.

8) Do not put labels in your mouth.

9) Do not stick labels onto skin.

10)If the machine “locks up” (i.e., it does not respond

when a key is pressed), press to turn off the

machine; then, while holding down and ,

press once to turn the machine on again.

FCC NOTICE

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one

or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician

for help.

– Changes or modifications not expressly approved by Brother

Industries, Ltd. could void the user’s authority to operate the

equipment.

How to make a label

1) Insert the batteries.

2) Insert a tape cassette.

3) Turn on the P-Touch by pressing .

4) Type in and format the text.

Your text can be up to 55 characters long including spaces. See

“Advanced functions” for more details on formatting your text.

5) Print the label by pressing .

Before printing, be sure that the back cover is attached,

otherwise the label cannot be printed.

6) Cut off the label.

The tape cutter button is equipped with a safety mecha-

nism. Do not try to force the cutter button since it cannot

be operated if no cassette is installed and the back cover is

removed. If the cutter button is forcefully operated, correct

printing may no longer be possible.

7) Peel off the backing.

Changing the batteries

1) Remove the back cover by pressing in on the rough

area at the top end of the machine and pulling off the

back cover.

2) If batteries are already installed, remove them.

Before removing the batteries, pull out the tape cas-

sette if one is installed.

3) Insert

six new AA-size (LR6) alkaline batteries

in the

direction shown by the illustration on the bottom of the

battery compartment. The positive end of the three bat-

teries in the bottom row point downward, while the

positive end of the top three batteries point in the

opposite direction.

Back cover

When inserting new batteries, always insert them pos-

itive end first. When removing old batteries, always

remove them negative end first.

Always replace all six batteries at the same time with

brand new ones.

4) Attach the back cover by inserting the two hooks on the

bottom end of the back cover into the slots on the bot-

tom end of the machine, then pushing down firmly on

the cover until it snaps into place.

Changing the tape cassette

1) Remove the back cover by pressing in on the rough

area at the top end of the machine and pulling off the

back cover.

2) If a tape cassette is already installed, pull it straight out

and remove the paper tab from the new tape cassette.

Make sure that the end of the tape in the new cassette

feeds under the tape guides.

The tape that is provided with the P-touch

Home&Hobby is a 13.3’ long (4m) starter tape. Tapes

available for purchase are 26.2’ (8m) long.

3) Insert the tape cassette, making sure that it clicks into place.

Check that the cassette fits properly around the two

metal guides in the cassette compartment.

4) Attach the back cover by inserting the two hooks on the

bottom end of the back cover into the slots on the bot-

tom end of the machine, then pushing down firmly on

the cover until it snaps into place.

5) Feed the tape by holding down and pressing ,

then cut the tape by pressing in on the tape cutter button.

The amount of tape remaining is visible through the

window in the back of the P-Touch.

When the usable tape is finished, green ribbon appears.

Changing the cutter unit

When the cutter becomes blunt and ceases to cut the tape

cleanly, replace it.

1) Remove the back cover and the tape cassette.

2) Grasp the tab on the top of the cutter unit and pull out

the cutter, taking care not to touch the blade.

3) Grasp the tab on the new cutter unit and insert it as

shown below.

Cleaning the print head

If dust accumulates on the print head, blank horizontal

lines may appear through the printed label. If this hap-

pens, clean the print head as follows:

1) Turn off the P-Touch.

2) Remove the back cover and the tape cassette.

3) Use a dry cotton swab to gently wipe the print head

and rubber pinch roller with an up-and-down motion.

4) Re-insert the tape cassette, attach the back cover, turn

on the machine, hold down and press to feed

the tape, and then try printing.

5) If blank lines remain in the printed label, repeat steps 1

through 4, this time using a cotton swab dipped in iso-

propyl (rubbing) alcohol.

Accessories

Most retailers and distributors carry a full line of tape cas-

settes. If you wish to order accessories for your P-Touch

direct from Brother, please refer to the “Accessory Order

Form” included separately, or visit our web site

“http://www.brothermall.com”.

Tape guides

Metal guides

Tape cutter

button

CAUTION

• When changing the cutter unit, be sure not to

touch the cutter blade.

• Keep the cutter unit in a safe place that is out of

the reach of small children.

The following accessories are available:

Tape cassettes 1/2” (12 mm)

$9.99 (SRP) 3/8” (9 mm)

$8.99 (SRP)

Black on silver

Black on gold

Black on blue

Black on green

Black on pink

M-931

M-831

M-531

M-731

M-E31

M-921

M-821

M-521

M-721

M-E21

Black on white M-231

Replacement cutter

unit TC7 $9.95 (SRP)

Carrying case 6991 $17.99

Cutter unit

Tape exit slot

Tab

Thermal print head Rubber pinch

roller

With the P-Touch HOME&HOBBY, you can make labels quickly and easily. Simply switch on the P-Touch, type in your text, then

print out your label. You can choose from five different text sizes, nine character styles, and seven framing settings. The text can be

printed on either one or two lines and can include accented characters and special symbols. In addition, nine preset layout formats are

available for you to type in and print out labels quickly. Six tape color (white, silver, gold, blue, green and pink) and two tape widths

(3/8” (9 mm) and 1/2” (12 mm)) are available for creating personalized labels.

LA3085001

Printed in China

®

Please read this instruction leaflet before using the P-Touch. Keep

it in a handy place for future reference.

Use only tape cassettes bearing the logo with this machine.

TAPE

Function keys

• On/Off ( )

To switch the P-Touch on or off, press .

The P-Touch conserves battery power by automatically

switching itself off if no key is pressed within five minutes.

When the batteries are low, “BATTERY” appears on the

display after printing. When the batteries are very low, the

P-Touch will automatically turn itself off when you try to

print text or feed the tape.

If the P-Touch is turned off and then on again, the current

text, text size and style, underline/frame setting, and Caps

setting remain unchanged.

• Caps ( )

To turn the Caps function on or off, press . When the

Caps

indicator is on, you can add capital letters to your

text by simply pressing the character keys. When the Caps

indicator is off, pressing a character key enters lower case

letter in your text.

• Num ( )

To turn the Num function on or off, press . When the

Num

indicator is on, you can add numbers to your text by

simply pressing the corresponding keys. When the Num

indicator is off, pressing a key adds a letter to the text.

• Space ( )

To add a space to your text, press .

• Return ( )

This key has 2 functions:

1) To end the first line of text and start the second line,

simply press .

2) To accept or confirm a setting, such as an accented

character or symbol.

Two-line text can only be printed with the

SIZE1

text size

and the

NORMAL

style. To change a message back to a

single line, use to delete the marker.

• Code ( / )

To access the functions or enter the characters printed in

yellow above the keys, press . See the following expla-

nations and “Advanced functions” for more details on

how this key is used.

The left and right Code keys can be used in the same way.

• Cursor movement ( , )

You can move the cursor ( _ ) to view or edit parts of the

text to the left or right of the 8 characters shown in the

LCD display. To move the cursor to the left, press ; to

move the cursor to the right, press . Move the cursor

several characters in a row by holding down the appropri-

ate key.

To position the cursor under the first character of the text,

hold down and press ; to position the cursor

immediately after the last character, hold down and

press .

• Backspace ( )

To delete the character to the left of the cursor, press .

This key can also be used to cancel current function and

return to the text mode.

To erase the current text, hold down and press . The

text size, style, underline/frame setting, and Caps/Num

setting are not cleared.

• Text ( )

To view the entered text, hold down and press . All

of the entered text, starting from the beginning, scrolls

along the display, then the length of the text appears .

To change the units, press while the text is scrolling

across the display. Press or (or press ) until

the desired unit appears, and then press . The current

label length appears in the display for a short time.

• Feed ( )

To feed out about 1” (24 mm) of tape at a time, hold down

and press . The message “FEED” appears while

the tape is fed.

Do not press the tape cutter button while feeding, as this

will cause the tape to jam.

• Print ( )

To print out the entered text, press . The message

“PRINT” appears while printing.

Do not press the tape cutter button while printing, as this

will cause the tape to jam.

• Accented characters (

)

To enter an accented character, first make sure the Caps

function is turned on or off as desired, then hold down

and press . After the message “A–U?” appears, press the

key of the desired letter (A, C, E, I, N, O or U).

In the displayed list of available accented characters, press

or to position the cursor under the desired

accented character, then press . Your text reappears on

the display with the selected character added.

To clear the list of available accented characters and return

to the current text, press (or hold down and press

) instead of pressing .

The following accented characters are available:

LCD display

Backspace key

On/Off key

Tape cutter button

Space key

Code key

Caps key

Num key

Print key

Code key

Accented characters Accented characters

Aàáäâãæ

ÀÁÄÂÃÆ Nñ Ñ

Cç ÇO

óöôõ

ÓÖÔÕ

E èéëê ÈÉËÊ U ùúüû ÙÚÜÛ

I í ï î Í Ï Î

Advanced functions

• Changing text size ( + )

To select a text size, hold down and press .

The currently selected size is displayed and is shown by

the indicator at the top of the display. Keep held

down and press until your desired text size appears

and is indicated at the top of the display. The selected text

size applies to the entire text.

The following five text sizes are available:

• Changing text style ( + )

To select a text style, hold down and press .

The currently selected style is displayed. Keep held

down and press until your desired text style appears.

The selected text style applies to the entire text.

The following nine text styles are available:

• Add underlining ( + )

To select underlining, hold down and press .

The currently selected setting is displayed. Keep held

down and press to switch between underline and nor-

mal text. The underline is printed under all of the text, but

is not printed when the

VERTICAL

style is selected. If a

frame was chosen before selecting underlining, the frame

is cancelled and the underline is printed.

The following underline settings are available:

• Add framing ( + )

To select a frame, hold down and press .

The currently selected setting is displayed. Keep held

down and press until your desired setting appears and

is displayed. The frame is printed around the entire text,

but is not printed when the

VERTICAL

style is selected. If

underlining was chosen before selecting a frame, the

underline is cancelled and the frame is printed.

SIZE1 SIZE2 SIZE3 SIZE4 SIZE5

NORMAL OUTLINE

SHADOW

I+BOLD (italic+bold)

ITALIC

I+SHADOW (italic+shadow)

I+OUTL (italic+outline)

VERTICAL

BOLD

TEXT (no underline) UNDL (underline)

The following frame settings are available:

• Add a symbol ( )

To enter a symbol, press . After the message “A–I?”

appears, press the letter key of the group containing the

desired symbol. In the displayed list of available

symbols, press or to position the cursor

under the desired symbol, then press . Your text reap-

pears on the display with the selected symbol added.

To clear the list of available symbols and return to the cur-

rent text, press (or ) instead of pressing .

The following symbols are available:

• Repeat printing ( + )

To print multiple copies of the current text with its formats,

hold down and press . After the message "1-9?"

appears, press the key corresponding to the desired num-

ber of labels that you want to print. Press to print the

specified number of labels.

• Using preset formatted layouts ( + )

To select an auto format, hold down and press .

After the message “1–9?” appears, press the number key of

the desired preset format. After the format name appears,

press to view each of the format settings (text size,

style and underline/frame). Press to select the

displayed format, then enter the text. The label will be

printed with the format settings of the selected auto format.

The following preset formatted layouts are available:

Symbols

AÜüÇçÆæ¡¿

BÃã ÕõÑñ

C áé íóú#

✽✔

D+

×

÷=§%; ˚

E

23234

™®©

F

☞

[]

G

H

I_˜

TEXT

(no frame) ROUND WOODEN POINTING

CANDY DOT DIAMOND SLANT

PRESET 1 PRESET 2 PRESET 3 PRESET 5PRESET 4

PRESET 7PRESET 6 PRESET 9PRESET 8

IMPORTANT WARRANTY INFORMATION

Thank you for purchasing this Brother Product. We hope that you will

enjoy using it. We suggest that you keep all packing and other materials.

After referring to the instruction manual, if you still need assistance, call

Brother’s “HELP” line at:

1-877-478-6824

SHOULD YOU ENCOUNTER ANY PROBLEMS WITH YOUR PRODUCT,

PLEASE DO NOT RETURN YOUR

PRODUCT TO THE STORE!

Function keys

• On/Off ( )

To switch the P-Touch on or off, press .

The P-Touch conserves battery power by automatically

switching itself off if no key is pressed within five minutes.

When the batteries are low, “BATTERY” appears on the

display after printing. When the batteries are very low, the

P-Touch will automatically turn itself off when you try to

print text or feed the tape.

If the P-Touch is turned off and then on again, the current

text, text size and style, underline/frame setting, and Caps

setting remain unchanged.

• Caps ( )

To turn the Caps function on or off, press . When the

Caps

indicator is on, you can add capital letters to your

text by simply pressing the character keys. When the Caps

indicator is off, pressing a character key enters lower case

letter in your text.

• Num ( )

To turn the Num function on or off, press . When the

Num

indicator is on, you can add numbers to your text by

simply pressing the corresponding keys. When the Num

indicator is off, pressing a key adds a letter to the text.

• Space ( )

To add a space to your text, press .

• Return ( )

This key has 2 functions:

1) To end the first line of text and start the second line,

simply press .

2) To accept or confirm a setting, such as an accented

character or symbol.

Two-line text can only be printed with the

SIZE1

text size

and the

NORMAL

style. To change a message back to a

single line, use to delete the marker.

• Code ( / )

To access the functions or enter the characters printed in

yellow above the keys, press . See the following expla-

nations and “Advanced functions” for more details on

how this key is used.

The left and right Code keys can be used in the same way.

• Cursor movement ( , )

You can move the cursor ( _ ) to view or edit parts of the

text to the left or right of the 8 characters shown in the

LCD display. To move the cursor to the left, press ; to

move the cursor to the right, press . Move the cursor

several characters in a row by holding down the appropri-

ate key.

To position the cursor under the first character of the text,

hold down and press ; to position the cursor

immediately after the last character, hold down and

press .

• Backspace ( )

To delete the character to the left of the cursor, press .

This key can also be used to cancel current function and

return to the text mode.

To erase the current text, hold down and press . The

text size, style, underline/frame setting, and Caps/Num

setting are not cleared.

• Text ( )

To view the entered text, hold down and press . All

of the entered text, starting from the beginning, scrolls

along the display, then the length of the text appears .

To change the units, press while the text is scrolling

across the display. Press or (or press ) until

the desired unit appears, and then press . The current

label length appears in the display for a short time.

• Feed ( )

To feed out about 1” (24 mm) of tape at a time, hold down

and press . The message “FEED” appears while

the tape is fed.

Do not press the tape cutter button while feeding, as this

will cause the tape to jam.

• Print ( )

To print out the entered text, press . The message

“PRINT” appears while printing.

Do not press the tape cutter button while printing, as this

will cause the tape to jam.

• Accented characters (

)

To enter an accented character, first make sure the Caps

function is turned on or off as desired, then hold down

and press . After the message “A–U?” appears, press the

key of the desired letter (A, C, E, I, N, O or U).

In the displayed list of available accented characters, press

or to position the cursor under the desired

accented character, then press . Your text reappears on

the display with the selected character added.

To clear the list of available accented characters and return

to the current text, press (or hold down and press

) instead of pressing .

The following accented characters are available:

LCD display

Backspace key

On/Off key

Tape cutter button

Space key

Code key

Caps key

Num key

Print key

Code key

Accented characters Accented characters

Aàáäâãæ

ÀÁÄÂÃÆ Nñ Ñ

Cç ÇO

óöôõ

ÓÖÔÕ

E èéëê ÈÉËÊ U ùúüû ÙÚÜÛ

I í ï î Í Ï Î

Advanced functions

• Changing text size ( + )

To select a text size, hold down and press .

The currently selected size is displayed and is shown by

the indicator at the top of the display. Keep held

down and press until your desired text size appears

and is indicated at the top of the display. The selected text

size applies to the entire text.

The following five text sizes are available:

• Changing text style ( + )

To select a text style, hold down and press .

The currently selected style is displayed. Keep held

down and press until your desired text style appears.

The selected text style applies to the entire text.

The following nine text styles are available:

• Add underlining ( + )

To select underlining, hold down and press .

The currently selected setting is displayed. Keep held

down and press to switch between underline and nor-

mal text. The underline is printed under all of the text, but

is not printed when the

VERTICAL

style is selected. If a

frame was chosen before selecting underlining, the frame

is cancelled and the underline is printed.

The following underline settings are available:

• Add framing ( + )

To select a frame, hold down and press .

The currently selected setting is displayed. Keep held

down and press until your desired setting appears and

is displayed. The frame is printed around the entire text,

but is not printed when the

VERTICAL

style is selected. If

underlining was chosen before selecting a frame, the

underline is cancelled and the frame is printed.

SIZE1 SIZE2 SIZE3 SIZE4 SIZE5

NORMAL OUTLINE

SHADOW

I+BOLD (italic+bold)

ITALIC

I+SHADOW (italic+shadow)

I+OUTL (italic+outline)

VERTICAL

BOLD

TEXT (no underline) UNDL (underline)

The following frame settings are available:

• Add a symbol ( )

To enter a symbol, press . After the message “A–I?”

appears, press the letter key of the group containing the

desired symbol. In the displayed list of available

symbols, press or to position the cursor

under the desired symbol, then press . Your text reap-

pears on the display with the selected symbol added.

To clear the list of available symbols and return to the cur-

rent text, press (or ) instead of pressing .

The following symbols are available:

• Repeat printing ( + )

To print multiple copies of the current text with its formats,

hold down and press . After the message "1-9?"

appears, press the key corresponding to the desired num-

ber of labels that you want to print. Press to print the

specified number of labels.

• Using preset formatted layouts ( + )

To select an auto format, hold down and press .

After the message “1–9?” appears, press the number key of

the desired preset format. After the format name appears,

press to view each of the format settings (text size,

style and underline/frame). Press to select the

displayed format, then enter the text. The label will be

printed with the format settings of the selected auto format.

The following preset formatted layouts are available:

Symbols

AÜüÇçÆæ¡¿

BÃã ÕõÑñ

C áé íóú#

✽✔

D+

×

÷=§%; ˚

E

23234

™®©

F

☞

[]

G

H

I_˜

TEXT

(no frame) ROUND WOODEN POINTING

CANDY DOT DIAMOND SLANT

PRESET 1 PRESET 2 PRESET 3 PRESET 5PRESET 4

PRESET 7PRESET 6 PRESET 9PRESET 8

IMPORTANT WARRANTY INFORMATION

Thank you for purchasing this Brother Product. We hope that you will

enjoy using it. We suggest that you keep all packing and other materials.

After referring to the instruction manual, if you still need assistance, call

Brother’s “HELP” line at:

1-877-478-6824

SHOULD YOU ENCOUNTER ANY PROBLEMS WITH YOUR PRODUCT,

PLEASE DO NOT RETURN YOUR

PRODUCT TO THE STORE!