Brother P Touch Pt 900 Users Manual
PT-900 to the manual ef298120-1b13-4802-9314-376d1d8dfea1
2015-01-25
: Brother Brother-P-Touch-Pt-900-Users-Manual-213030 brother-p-touch-pt-900-users-manual-213030 brother pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
GENERAL PRECAUTIONS 9OO USER’S GUIDE www.brother.com Printed in China LW0937001 INTRODUCTION With your PT-900, you can create labels for any application. Select from the many frames, character sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges available allows you to print labels with different widths and exciting colours. Read this manual carefully before starting and keep the manual in a handy place for future reference. SPECIFICATIONS Dimensions: Weight: Power supply: Tape cassette: Cutter unit: POWER SUPPLY & TAPE CASSETTES • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull on the tape being fed from the P-touch, otherwise the tape cassette may be damaged. • Do not attempt to cut the tape while printing or feeding since this will damage the tape. • Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth. • Remove the batteries if you do not intend to use the machine for an extended period of time. Note: If power is disconnected for more than three minutes, all text shown in the display and any text files stored in the memory will be lost. Language and unit settings will also be cleared. • Do not put any foreign objects into or heavy objects on the machine. • Do not expose the machine to extremely high temperatures or high humidity. Never leave it on the dashboard or in the back of your car. • Avoid using the machine in extremely dusty places. Keep it out of both direct sunlight and rain. • Do not leave any rubber or vinyl on the machine for an extended period of time, otherwise the machine may be stained. • Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g. a cotton swab) to avoid permanent damage. • To avoid injuries, do not touch the cutter's edge. • Please contact your Brother dealer for details. • If the cutter blade becomes blunt after repetitive use and the tape can not be cut cleanly, replace with new cutter unit (stock no. TC-5) by obtaining from an authorized brother dealer. • Be sure to use scissors to cut the fabric tapes. The built-in cutter cannot completely cut the fabric tapes. a Remove the back cover by pressing in the rough area at the top end of the machine. If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them. b-1 b-2 c Insert six new AAA-size (LR03) alkaline batteries, making sure that their poles point in the correct directions. Always replace all six batteries at the same time using brand new ones. Tape cutter lever Cutter unit Attach the back cover by inserting the two hooks at the bottom into the slots on the machine, then pushing down firmly on the cover until it snaps into place. After you have installed the tape, feed the tape (see FEEDING) once and then push in the tape cutter lever to cut the tape. 108 mm (W) ✕ 196 mm (D) ✕ 55 mm (H) 335 g (without batteries and tape cassette) Six AAA size alkaline batteries (LR03: not included) Brother TZ tape 6 mm / 9 mm / 12 mm (width) TC-5 (replacement) Tape exit slot KEYBOARD & LCD GETTING STARTED LCD indicators MAKING TEXT a Start your machine b Set the language (English/French/German) Switching UPPER CASE/LOWER CASE Supply power by using six AAA batteries, and then press a. " Size Choose a language with b and press e. Upper case/Lower case Function Style c Underline/Frame NOTE: Set the unit (mm/inch) Backspace key " NOTE: • You can also display the languages and units by pressing the corresponding Num keys (1-3). Character keys NOTE: • To cancel operations, press d. • To delete entries backward, press d. • To initialize the settings, turn off the machine and then while holding down f and d, press a to turn the machine back on. Finally, release f and d. Power On/Off Letter Accented characters Letter Caps key Space key Accent key Symbol key Accented characters " c HELSINKI D d E e I i L l N n O o s T t ( f +1 ) Setting FONT C S >B Group >b Symbols Group A F B G C H D I >e Symbols E NOTE: • • • • You can also display the symbols by pressing h / b. To go to the next group, press h. To skip to a different group, press the corresponding character key of the group. You can also scroll the symbols in each group by pressing the corresponding character key of the group repeatedly. DESIGNING LABELS a r h >e A R Label image Entering SYMBOLS Check the display and press e. (To cancel, press d.) The LCD shows one row of 8 characters; however, the text that you enter can be up to 55 characters in length. >b Use either 9 mm or 12 mm wide tape for two line texts. Display Enter key Num keys/Function shortcuts >E ABC abc Move the cursor to where the second line starts and press e. Choose a unit with b and press e. Function key g Lower case ABC abc ABC DEF Cursor key Entering ACCENTED CHARACTERS Upper case Print key Power key Press a to turn on/off the machine. The machine automatically turns off if no key is pressed within 5 minutes. j Making TWO LINE TEXT Cursor Check the display and press e. (To cancel, press d.) " Print head Insert a tape cassette, making sure that it snaps into place. • Make sure that the end of the tape feeds under the tape guides. • Be sure to remove the paper tab when installing a new tape cassette. • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette. • Use only Brother TZ tapes with this machine. f>f/b >e>f/b >e OKLAHOMA " f>f/b >e>f/b OFF UNDL (Underline) ROUND BANNER WOODEN VINE >e NOTE: f>f/b >e>f/b >e AUTO automatically adjusts the text size according to the tape width. SIZE1 SIZE2 SIZE3 NOTE: Setting STYLE Y y " Z z (f+5) Setting TAB NORMAL abc >e>f/b BOLD OUTLINE >e SHADOW NOTE: • You can also display the characters by pressing g / b. • To go to the next letter group, press g. b > f > f/b >e Label image (f+3) f>f/b >e>b >e • You can also select the length by entering the length with Num keys. • To return to AUTO, press any alphabet key or i. (f+8) You can choose label length from six formats to create labels for various applications. No underline or frame is set to texts in VERTICAL style. " • Two line texts are printed in SIZE1 regardless of the setting. • Only AUTO, SIZE1 and SIZE2 can be used on 6mm tapes. u f > f/b (f + 7 ) " f>f/b >e>f/b >e You can make aligned texts by setting tabs. SIZE5 U " Using AUTO FORMAT Example: To set a tab between “abc” and “d” SIZE4 Setting LABEL LENGTH (AUTO/40 - 300mm) NOTE: (f+2) Setting SIZE " (f + 4 ) Setting UNDERLINE/FRAME ITALIC I+BOLD (ITALIC + BOLD) I+OUTL (ITALIC + OUTLINE) I+SHADOW (ITALIC + SHADOW) VERTICAL MIRROR Application VCR VHS 3.5" Floppy Disk CD Length LCD Application Length 140mm FILE TAB File Tab 68mm AUDIO Audio Cassette 100mm VIDEO 8 VCR 8mm (Video 8) 70mm 89mm 92mm d (f +0 ) To CLEAR Tab NOTE: LCD VCR VHS FD 3.5" CD CASE The cursor should be positioned where you set a tab. All text and settings will be cleared. (f + 6 ) Setting TAB LENGTH (0 - 100mm) " f > f/b NOTE: You can also select the length by entering the length with Num keys. >e>b " f > f/b >e >e • To skip to a different letter group, press the corresponding character key. • You can also scroll the characters in each letter group by pressing NOTE: the corresponding character key repeatedly. CHAIN is for printing more than 1 copy of a label with minimum margin. You can also create a label containing texts in various styles; print a text in one style, and before feeding, enter the second text in another style . PRINTING (f+c) TEXT PREVIEW NOTE: You can preview the text before printing. " NOTE: f > f/b FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may damage the tape cassette. CHAIN >e • The LCD shows the whole text and the label length (mm/inch), then returns to the original text. • Only the text can be previewed, but not the font, style, size, underline/frame or any additional features. (f+i) f > f/b ABC ABC ABC You can store up to 9 frequently used text files and recall them to create labels more quickly and easily. " f > f/b " (feed & cut) (f+,) Print Option/REPEAT PRINTING You can print up to 9 copies of each label. f/b " NOTE: c • To cut off the label, push in the tape cutter lever on the upper-right corner of the machine. • To prevent damage to the tape, do not try to cut while the message PRINT or FEED is displayed. • Be sure to use scissors to cut the fabric tapes. The built-in cutter cannot completely cut the fabric tapes. (f+.) TAPE MARGIN f > f/b > e > f/b > f/b > >e " f/b " " f>f/b >e>f/b Example: To print copies of a label containing a serial number (0123, 0124 and 0125) 25mm 25mm 12mm 12mm 4mm 4mm b f/b >e Cut along the printed dots (:) with scissors so the text is centred in the label. HALF NARROW (f+,) You can print many copies of the same text while increasing a selected number by 1 after each label is printed. > f > f/b >e >e> > f/b >e FULL/HALF/NARROW is for leaving equal margins on both sides of the text. NOTE: FULL • When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may damage the tape cassette. • When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with scissors to separate the labels. Print Option/NUMBERING " NOTE: >e >b >e >e >b >e >e >b >e An error occurred. BATTERY The batteries are weak. BATTERY The batteries are empty. FULL The maximum number of characters (55 characters) have already been entered or the memory is full. LONG TXT The text length exceeds the selected label length. To RECALL; f/b NOTE: PRINTING >e> ERROR TROUBLESHOOTING To DELETE; e NOTE: ERROR MESSAGE LIST To STORE; ABC DEF (feed & cut) " >e MEMORY (F+9) ABC FEEDING (TAPE FEED) " • Two line texts are printed in NORMAL regardless of the setting. • Use clear tape in MIRROR, so the labels appear on the other side when stuck on glass, windows or other transparent surfaces. • The last number that will be printed must be larger than the number selected in the text, otherwise the message ERROR appears. • When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may damage the tape cassette. • When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with scissors to separate the labels. • When the memory is full, delete one or more files and then store the new file. • You can also choose a file number by pressing the corresponding Num key (1-9). Problem • Check that the batteries are correctly inserted. • If the batteries are weak, replace them. The machine does not print, or the printed characters are blurred. • Check that the tape cassette has been inserted correctly. • If the tape cassette is empty, replace it. • Check that the character size is appropriate for the width of the tape that is used. The printed characters are not formed properly. • If the batteries are weak, replace them. FUNCTION SHORTCUTS (F+...) In addition to the basic steps to search for a function, PT-900 provides you with function shortcuts so you can easily jump to a frequently used function just by pressing f and the shortcut key shown in the table below. To confirm, press e (or the shortcut key again). Key LCD message 1 2 3 4 5 6 7 FONT SIZE STYLE UNDL/FRM TAB TAB LEN LENGTH NOTE: NOTE: Function Character font Character size Print style Underline/Frame Tab setting Tab length Label length Key LCD message 8 9 0 . , c i A/F MEMORY CLEAR MARGIN PRINT OP PREVIEW FEED Function Auto Format Memory Clear text + style Tape margin Repeat/Numbering Text preview Tape feed • PRINT OP contains two functions, REPEAT PRINTING and NUMBERING. • For PREVIEW and FEED, press e to preview/feed after the LCD message appears. You can also refer to the chart indicated on the back of the machine. Solution The display stays blank after you have turned on the machine. Striped tape appears. • The tape cassette is empty. Replace it. The memory has cleared on its own. • The batteries may be weak. Replace them. A blank horizontal line appears through the printed label. • There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up-anddown motion. • The print head can be cleaned more easily if the optional print head cleaning cassette (TZ-CL3) is used. The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on). • Turn off the machine, and then while holding down f and d, press a to turn the machine back on. Finally, release f and d. Note: The text and formats in the display and all text files stored in the memory are erased. Also, the language and unit settings will be cleared.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2007:09:10 10:20:41+09:00 Modify Date : 2007:11:22 17:10:34-08:00 Page Count : 1 Creation Date : 2007:09:10 01:20:41Z Mod Date : 2007:09:10 01:20:41Z Producer : Acrobat Distiller 5.0.1 for Macintosh Metadata Date : 2007:09:10 01:20:41ZEXIF Metadata provided by EXIF.tools