Brother NC7100 802.11b/g wireless LAN card User Manual NC7100w NUG

Brother Industries, Ltd. 802.11b/g wireless LAN card NC7100w NUG

User Manual

Multi-Protocol 802.11b/gWireless Print ServerNC-7100wNetwork User's GuideVersion 0This product is approved for use in the coutnry of purchase only. Do not use this product outside the country of purchase as it may violate the wireless telecommunications regulations of that country.Please read this manual thoroughly before using the printer. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times.The Brother Solutions Center (http://solutions.brother.com) is your one stop resource for all your printer needs. Download the latest drivers and utilities for your printers or read the FAQs and troubleshooting tips.Some Brother printer models are network ready as standard. Other Brother printers can be upgraded with an optional Network Print Server.
i TrademarksBrother is a registered trademark of Brother Industries, Ltd.Windows and Windows NT are registered trademarks of Microsoft Corporation in the US and other countries.HP, HP-UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company.DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation.UNIX is a registered trademark of The Open Group.Ethernet is trademark of Xerox Corporation.Adobe PostScript is a registered trademark and PostScript3 is a trademark of Adobe Systems Incorporated.NetWare is a trademark of Novell, Inc.Apple, Macintosh, iMac, LaserWriter and AppleTalk are registered trademarks and Rendezvous is a trademark of Apple Computer, Inc.IBM, LAN Server, and AIX are trademarks of International Business Machines Corporation.LAN Manager, Windows, and MS-DOS are trademarks of Microsoft Corporation.This product includes object code from Atheros SDK for AR5001.All other brand and product names mentioned in this user's guide are registered trademarks or trademarks of respective companies. Compilation and PublicationUnder the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice.Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.©2004 Brother Industries Ltd. ©1998-2004 TROY Group, Inc. ©1983-2004 PACIFIC SOFTWORKS INC. ©2004 Atheros Communications, Inc. ALL RIGHTS RESERVED.Shipment of the print serverIf for any reason you must ship your print server, carefully package the print server to avoid any damage during transit. It is recommended that you save and use the original packaging. The print server should also be adequately insured with the carrier.WARNINGWhen shipping the print server, put it into the anti-static bag to avoid damage.
 iiIMPORTANT NOTE:For technical and operational assistance, you must call.Calls must be made from within that country.In USA 1-800-276-7746If you have any comments or suggestions, please write to us at:In USA Printer Customer SupportBrother International Corporation15 MusickIrvine CA  92618Brother fax-back systemBrother Customer Service has set up an easy-to-use fax-back system so you can get instant answers to common technical questions and information about all our products. This is available 24 hours a day, seven days a week. You can use the system to send the information to any fax machine.Call the number below and follow the recorded instructions to receive a fax about how to use the system and an Index of the subjects you can get information about.In USA only 1-800-521-2846Dealers and service centersFor the name of a Brother authorized dealer or service center, call 1-800-284-4357.Internet addressesBrother Global Web Site: http://www.brother.comFor Frequently Asked Questions (FAQs), Product Support and Technical Questions, and Driver Updates and Utilities: http://solutions.brother.com(In USA Only) For Brother Accessories & Supplies: http://www.brothermall.com
iii IMPORTANT INFORMATION: REGULATIONSFederal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only)Responsible Party: Brother International Corporation100 Somerset Corporate BoulevardBridgewater, NJ 08807-0911, USATEL: (908) 704-1700declares, that the productsProduct Name: Brother Network Card (BR-net)Model Number:  NC-7100w / NC-7100(NC-7100 is a wireless LAN card which is installed in NC-7100w)complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -  Reorient or relocate the receiving antenna.-  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help. ImportantChanges or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment.
 ivIntel Copyright and License InformationThis product includes object code from Intel’s UPnP SDK.The following is the copyright and licensing information for Intel UPnP SDK.Copyright© 2004 Intel CorporationAll rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither name of Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
v Table of ContentsIMPORTANT INFORMATION: REGULATIONS ...........iiiFederal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) ..............iiiIntel Copyright and License Information....................ivTable of Contents ................................................................ v1Unix® Printing........................................................................1-1Printing from UNIX®/Linux Using TCP/IP..........................1-1Overview.....................................................................1-1TCP/IP........................................................................1-2General TCP/IP UNIX® Host Configuration ................1-2Linux Configuration.....................................................1-6Linux Configuration Using CUPS ...........................1-6HP-UX Configuration ..................................................1-7IBM RS/6000 AIX Configuration .................................1-8Sun Solaris 2.x Configuration .....................................1-9SCO UNIX® Configuration ........................................1-10IBM AS/400 ..............................................................1-11Other Systems..........................................................1-13Other Sources of Information ...................................1-142TCP/IP Printing......................................................................2-1Printing from Windows NT®4.0, Windows® 2000/XP, LAN Server and Warp Server...................................................2-1Overview.....................................................................2-1Windows NT®4.0 and Windows® 2000/XP (TCP/IP) Configuration ..............................................................2-2Windows® 2000/XP Printing (Printer Driver not yet installed) .....................................................................2-2Standard TCP/IP Port Printing................................2-2Windows® 2000/XP Printing (Printer Driver already installed) .....................................................................2-4Windows NT®4.0 Printing ...........................................2-4Windows NT®4.0 Printing: Installing the Brother Peer to Peer Software.............................................................2-5Windows NT®4.0 Printing: Associating to the Printer .2-6Windows NT®4.0 Printing: Adding a Second Brother LPR Port.............................................................................2-7LAN Server, OS/2 Warp Server Configuration ...........2-7Server Configuration...............................................2-7
 viConfiguration of an OS/2 Server ............................2-8Other Sources of Information ...................................2-103Peer to Peer Printing ............................................................3-1How to Print in a Windows® 95/98/Me Peer to Peer Network..........................................................................................3-1Overview.....................................................................3-1Quick Tips:..............................................................3-1Driver Deployment Wizard......................................3-2TCP/IP Printing...........................................................3-2Installing the Brother Peer to Peer Software ..............3-3Associating to the Printer............................................3-4Adding a Second Brother LPR Port............................3-5Other Sources of Information .....................................3-54NetBIOS Peer to Peer Printing.............................................4-1How to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT®4.0, LAN Server and OS/2 Warp Server.............................................................................................4-1Overview.....................................................................4-1Print Server Configuration ..........................................4-2Changing the Workgroup/Domain Name Using TELNET or BRCONFIG or a Web Browser...............................4-3NetBIOS Port Monitor for Windows® 95/98/Me/2000/XP and Windows NT®4.0..................................................4-4Installing the Brother NetBIOS Port Monitor...............4-4Associating the Printer................................................4-5Windows® 95/98/Me ...............................................4-5Windows NT®4.0 /Windows® 2000/XP....................4-6Adding a Second NetBIOS Print Port.........................4-7Windows® 95/98/Me ...............................................4-7Windows NT®4.0 / Windows® 2000/XP...................4-8LAN Server/OS/2 Warp Server Configuration ............4-8Server Configuration:..............................................4-8Workstation Configuration: .....................................4-9Other Sources of Information .....................................4-95Configuring Internet Printing for Windows®......................5-1Internet Printing Installation ..............................................5-1Overview.....................................................................5-1Brother Internet Print General Information .................5-2Brother Internet Print: Configuring the Brother Print Server.........................................................................5-3Print Server Configuration Checklist.......................5-3
vii Brother Internet Print: Using BRAdmin to Configure the Print Server.................................................................5-4Brother Internet Print: Using a Web Browser to Configure the Print Server...........................................................5-5Brother Internet Print: Using TELNET to Configure the Print Server.................................................................5-5Brother Internet Print: Installing the BIP Software on Windows® 95/98/Me/2000/XP and Windows NT®4.0..5-6Setup from CD-ROM ..............................................5-7Adding a Second Brother Internet Port.......................5-9Windows® 2000/XP IPP Printing.................................5-9Specifying a Different URL .......................................5-11Other Sources of Information ...................................5-126Novell® NetWare® Printing....................................................6-1How to Configure Novell® NetWare® Printing ...................6-1Overview.....................................................................6-1General Information....................................................6-2Creating a NDPS Printer Using NWADMIN for NetWare® 5.................................................................6-3NDPS Manager ..........................................................6-3NDPS Broker..............................................................6-4Creating a Printer Agent.............................................6-5Configuring NetWare® 3 and NetWare® 4 Systems....6-6Creating the NetWare® Print Server (Bindery Queue Server) Using BRAdmin Professional Utility...............6-6Creating the NetWare® Print Server (NDS Queue Server) Using BRAdmin Professional Utility............................6-8Creating the NewWare® Print Server (NDS Queue Server) Using Novell® NWADMIN and BRAdmin Professional Utility......................................................6-9Creating the NetWare Print Server (NDS Remote Printer) Using Novell® NWAdmin and BRAdmin Professional Utility.........................................................................6-12Configuring the Brother Print Server (Queue Server Mode in Bindery Emulation Mode) Using PCONSOLE and BRCONFIG........................................................6-14Configuring the Brother Print Server (Queue Server Mode in NDS Mode) Using PCONSOLE and BRCONFIG6-15Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG...............................................................6-18Other Sources of Information ...................................6-22
 viii7Printing From a Macintosh®.................................................7-1Printing From a Macintosh® Using AppleTalk® and TCP/IP or RendezvousTM.................................................................7-1Overview.....................................................................7-1Macintosh® Configuration (Mac OS® X 10.1 to 10.3) ...........................................7-3How to Select the Print Server (AppleTalk®/EtherTalk®).....................................................................................7-3How to Select the Print Server (TCP/IP) ....................7-4Apple® RendezvousTM Printing........................................7-5How to Select the Printer Driver .................................7-5Changing the Configuration..............................................7-6Other Sources of Information............................................7-68Web Based Management .....................................................8-1How to use a Web Browser to Manage Your Device........8-1Overview.....................................................................8-1How to Connect to Your Printer Using a Browser ......8-2Other Sources of Information .....................................8-29TCP/IP Configuration............................................................9-1Assigning TCP/IP Information...........................................9-1Overview.....................................................................9-1Using the Printer Control Panel to Allocate an IP Address (Printers with LCD Panels Only).................................9-2Changing the IP Address Using the BRAdmin Application....................................................................................9-2Using BRAdmin and the IPX/SPX Protocol to Set the IP Address ......................................................................9-3Using BRAdmin and the TCP/IP Protocol to Set the IP Address ......................................................................9-4Using DHCP to Configure the IP Address..................9-5Using APIPA to Configure the IP Address..................9-5Using ARP to Configure the Print Server IP Address.9-6Using RARP to Configure the IP Address ..................9-8Using BOOTP to Configure the IP Address................9-9Configuring the IP Address with BRCONFIG ...........9-10Changing the IP Address Settings with the TELNET Console ....................................................................9-11Other Sources of Information ...................................9-1310Troubleshooting .................................................................10-1Overview...................................................................10-1Wireless Setup Problems .........................................10-1
ix Network Initial Setup Problems ................................10-7Intermittent Problems .............................................10-10TCP/IP Troubleshooting .........................................10-10UNIX® Troubleshooting...........................................10-11Windows NT®4.0/LAN Server (TCP/IP) Troubleshooting................................................................................10-12Windows® 95/98/Me Peer to Peer Print (LPR) Troubleshooting......................................................10-13Windows® 95/98/Me Peer-to-Peer (HP JetAdmin Compatible Method) Troubleshooting ....................10-13Windows® 95/98/Me and Windows NT®4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting............................10-14Brother Internet Print (TCP/IP) Troubleshooting ....10-14Windows® 95/98/Me/2000/XP IPP Troubleshooting ........................................................................................10-15Novell® NetWare® Troubleshooting ........................10-16AppleTalk® Troubleshooting ...................................10-17Web Browser Troubleshooting (TCP/IP) ................10-17Appendix A........................................................................... A-1General Information..........................................................A-1BRAdmin (Recommended).........................................A-1Web BRAdmin ............................................................A-1HTTP (Recommended) ..............................................A-2WebJetAdmin .............................................................A-2TELNET......................................................................A-2BRCONFIG.................................................................A-2Using Services..................................................................A-3General.......................................................................A-3Reloading the Print Server Firmware................................A-4General.......................................................................A-4Reloading Firmware Using BRAdmin .........................A-5Reloading Using the FTP Protocol from a Command Prompt........................................................................A-6Reloading Using the FTP Protocol from a Web Browser....................................................................................A-7Other Information..............................................................A-8How to Print a Network Configuration Page ...............A-8How to Reset to Factory Default Setting ....................A-8Appendix B........................................................................... B-1Wireless Network..............................................................B-1Introduction.................................................................B-1Wireless LAN terms and concepts .............................B-1
 xInfrastructure Mode ................................................B-2Ad-hoc Mode ..........................................................B-2Authentication and Encryption................................B-3Channels ................................................................B-4Configuring the Brother Wireless Print Server............B-5Using the Control Panel Menus to Configure the Wireless Print Server..............................................B-5Using the BRAdmin Professional Utility to Configure the Wireless Print Server (for Windows® users) ...B-10Using a Web Browser to Configure the Wireless Print Server (for Windows® users) ................................B-12NC-7100w Print Server Specifications .....................B-12Index .......................................................................................I-1
1 - 1 UNIX® PRINTING11Unix® PrintingPrinting from UNIX®/Linux Using TCP/IPOverviewBrother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX® host computers support TCP/IP, this capability allows a printer to be shared on a UNIX® Ethernet network. As with all protocols, TCP/IP communications can proceed concurrently while other protocols are active, this means that UNIX®, NetWare®, Apple®, and other computers can share the same Brother print server over an Ethernet network.The Linux operating system uses the same setup procedures as standard Berkeley UNIX® systems. Refer to this chapter for a typical GUI based Linux installation.Quick Tips:1The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If you want to disable the APIPA protocol, you can turn the setting off by using control panel buttons to access APIPA in the TCP/IP setting of the NETWORK menu. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel, the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer. 2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address on your printer.3The default password for Brother print servers is access.
UNIX® PRINTING 1 - 24The default name for a Brother print server is usually BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address of the print server). 5When configuring the PRINTCAP file, pay particular attention to the service names, BINARY_P1 and TEXT_P1.TCP/IPBrother print servers appear to the network as a UNIX® host computer with a unique IP address running the lpd (line printer daemon) protocol. As a result, any host computer that supports the Berkeley remote LPR command can spool jobs to Brother print servers without the need for any special software on the host computer. For special applications, raw TCP ports are also available.Brother print servers also support the FTP protocol. This protocol can be used to send print jobs from UNIX® systems.The Brother print server is pre-configured to run on a TCP/IP network with a minimum of setup. The only mandatory configuration of the print server is the allocation of an IP address, which can be either automatically assigned using DHCP, BOOTP etc., or manually assigned using the ARP command, BRAdmin Professional utility, or the printer control panel.General TCP/IP UNIX® Host ConfigurationThe configuration process for most UNIX® systems is described in the following steps. As this process varies, we recommend that you refer to your system documentation for additional information.1Configure the /etc/hosts file on each UNIX® host that needs to communicate with the print server. Use your favorite editor to add an entry to the /etc/hosts file containing the IP address and node name of the device. For example:192.189.207.3 BRN_310107For setting the IP address of the print server, refer to the Quick Setup Guide or to chapter 9 of this User’s Guide.
1 - 3 UNIX® PRINTINGThe actual format of the entry may vary depending on your system, check your system documentation and also note the format of other entries in the /etc/hosts file.In any case, the node name in the /etc/hosts file must match the node name in the /etc/printcap file.Some systems such as HP-UX and AIX allow you to enter the IP address as the host name when setting up the print queue. If this is the case, you do not need to configure the hosts file.2Choose which print server service you want to use. There are several types of services available on Brother print servers. Binary services pass data through unmodified and are therefore required for PCL or PostScript rasterized graphics printouts. Text services add a carriage return at the end of each line for proper formatting of UNIX® text files (which end in linefeed and do not have carriage returns). The text service can also be used for non-rasterized graphics, such as ASCII PostScript graphics or many types of PCL graphics.Choose one of the available services (a service name will be used in step 3):BINARY_P1 Binary dataTEXT_P1 Text data (CR added)You may set up multiple print queues on your UNIX® host computer for the same print server, each one with a different service name (for example, one queue for binary graphics jobs and one for text jobs). The node name in this file does not necessarily need to be the same as the one that is actually configured into the Brother print server (the name that appears on the Network Configuration Page), however, it is good practice to make the names the same. See How to Print a Network Configuration Page on page A-8 for information how to print the Network Configuration Page on your print server. (Some operating systems, such as HP-UX, do not accept the "_" character in the default name, for these systems you must use a different name).
UNIX® PRINTING 1 - 43Configure the /etc/printcap file on each host computer to specify the local print queue, the print server name (also called remote machine or rm), and the print server service name (also called remote printer, remote queue, or rp), and the spool directory.An example of a typical printcap file:laser1|Printer on Floor 1:\:lp=:\:rm=BRN_310107:\:rp=TEXT_P1:\:sd=/usr/spool/lpd/laser1:This step applies to the majority of UNIX® systems, including Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd option required), DEC ULTRIX, DEC OSF/1, and Digital UNIX®. SCO UNIX® users should follow these steps, but should also refer to the SCO UNIX® Configuration section. Users of RS/6000 AIX, HP-UX, Sun Solaris 2.xx, and other systems that do not use the printcap file should skip to step 4. SCO user's should also skip to step 4 (SCO uses the printcap file, but this file is automatically configured via the rlpconf command).Make sure this information is added to the end of the printcap file. Also make sure that the last character in the printcap file is a colon ":".This will create a queue named laser1 on the host computer that communicates to a Brother print server with a node name (rm) of BRN_310107 and a service name (rp) of TEXT_P1 printing text files to a Brother printer through spool directory /usr/spool/lpd/laser1. If you are printing binary graphics files, you would use the service BINARY_P1 instead of TEXT_P1.
1 - 5 UNIX® PRINTING%lpc statuslaser1:queuing is enabledprinting is enabledno entriesno daemon presentUsers of AT&T-compatible UNIX® systems can generally use the lpstat or rlpstat commands to obtain similar status information. Because this procedure varies from system to system, refer to your system documentation for the exact usage. 4Skip this section if you have completed Step 3, unless you have an SCO UNIX® system.If you have an HP-UX system, IBM RS/6000 AIX computer, or Sun Solaris 2.xx, there is no printcap file. This is also true for some other AT&T-based UNIX® systems, as well as many VMS-based TCP/IP software packages (for example, UCX, TGV Multinet, etc.). On SCO systems, there is a printcap file, but it is automatically configured by the rlpconf command. Most of these systems generally use a printer setup program to define the service name (remote printer), the print server name (remote machine) or IP address, and the local queue name (spool directory). Refer to the appropriate section depending on your version of UNIX®.The rm and rp options are not available on some UNIX® systems, so if necessary check your documentation to determine the equivalent options.Users of Berkeley-compatible UNIX® systems can use the lpc command to obtain the printer status:
UNIX® PRINTING 1 - 6Linux ConfigurationIf you do not wish to use the command line interface to configure your Linux distribution, you may wish to use the Linux Printer System Manager application on your GUI. To do this, do the following:1From the Linux Printer System Manager screen, click the Add button.2You will now be asked to specify which Printer type you are using, select the Remote UNIX (lpd) Queue option and click OK.3You must now specify the remote host name, remote queue name and the input filter to use.4The Remote Host name is the IP address of the printer, or the name from the hosts file which corresponds to the IP address of the printer.5The Remote Queue name is the service name that the printer will use when processing the data. Generally we recommend that you use the name "BINARY_P1", however, if you are planning to send text documents that do not have a carriage return and a line feed, then use "TEXT_P1". 6Select the appropriate Input Filter from the list of available printers on your particular build of Linux.In order to make your settings work, select the Restart lpd option. As soon as the lpd server restarts, you will be able to send printed documents from your server.Linux Configuration Using CUPSMany Linux systems support Common UNIX® Printing System (CUPS).For more detailed information on Linux printing visit the Brother Solutions web site at: http://solutions.brother.com
1 - 7 UNIX® PRINTINGHP-UX ConfigurationIn the case of HP-UX10.xx, the sam program is used to set up the remote printer. The steps are as follows:1Execute the sam program. From the list of options, select Printers and Plotters.2Select LP Spooler.3Select Printers and Plotters.4Select Actions and then Add Remote Printer/Plotter.5Enter any name as the Printer Name (this will be the name of the print queue).6Enter the IP address of the print server as the Remote System Name.7Enter the desired print server service name as the Remote Printer Name.8Check the box next to Remote Printer is on BSD system.9You may accept the default values for the remaining items.10Click OK to configure the printer.You should now be able to print using the lp-d command with the printer name.If you are using the HP distributed print service, the configuration procedure is slightly different because you are sending the print jobs to a file server, which in turn spools the job to the print server. You must therefore know the name of the file server (spooler host) in addition to the above information. You will add a physical and a remote printer, and then assign a logical printer to the remote printer (a unique name that does not match any other name). To print, use the lp -d command with the logical printer name.
UNIX® PRINTING 1 - 8Earlier versions of HP-UX use similar procedures to 10.xx users:1Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer).2Enter the following remote printer settings (the other settings do not matter):■Line printer name (user-selectable).■Remote system name (the print server name; must match what is in hosts file or use print server IP address).■Remote printer queue (Print server binary or text service name, e.g. BINARY_P1 or TEXT_P1). ■Remote Printer is on a BSD System (Yes).IBM RS/6000 AIX ConfigurationThe RS/6000 AIX operating system uses the smit program to set up the remote printer. The procedure is as follows for AIX 4.0 and later:1Enter smit and select devices.2Select Printer/Plotter.3Select Print Spooling.4Select Add a Print Queue.5Select Remote.6Enter the following Remote Printer Settings:Name of queue (user selectable)Host name of Remote Printer (print server name; must match name in /etc/hosts file or use the print server IP address)Name of queue on remote printer (print server binary or text service name, eg. BINARY_P1 or TEXT_P1).Type of print spooler. BSD (press the LIST button and choose BSD)
1 - 9 UNIX® PRINTINGThe procedure for pre-V4.0 systems is as follows.1Enter smit and select devices.2Select printer/plotter.3Select manage remote printer subsystem.4Select client services.5Select remote printer queues.6Select add a remote queue.7Enter the following remote queue settings:■Name of queue to add (user selectable).■Activate the queue (Yes).■Destination host (print server name; must match name in /etc/hosts file or use the print server IP address)■Name of queue on remote printer (print server binary or text service name, eg. BINARY_P1 or TEXT_P1). ■Name of device to add (user selectable; for example lp0).Sun Solaris 2.x ConfigurationSun Solaris 2.x uses the lpsystem and lpadmin programs for remote printer configuration:lpsystem -t bsd prnservernamelpadmin -p queue -s prnservername!prnserverserviceaccept queue  (not required on newer Solaris systems)enable queue (not required on newer Solaris systems)Where queue is the name of the local print queue.prnservername is the name of the print server (must match the entry in the /etc/hosts file or IP address).prnserverservice is the print server BINARY_P1 or TEXT_P1 service.
UNIX® PRINTING 1 - 10If this is the first printer configured, you must also use the lpsched command prior to the accept command.As an alternative, you may use Printer Manager in the Admintool utility under OpenWindows. Select Edit, Add, and Add Access to Remote Printer. Then enter the print server name in the format prnservername!\prnserverservice as described above. Make sure that the printer server OS is set to BSD (the default setting), and click Add.Note that we recommend that you use the /etc/hosts file for the printer name rather than NIS or other name services. Also note that due to a bug in the Sun lpd implementation on Solaris 2.4 and earlier releases, you may experience problems printing very long print jobs. If this is the case, a workaround is to use the raw TCP port software as described later in this chapter.SCO UNIX® ConfigurationTo configure a printer in version Version 5.x of SCO UNIX®, use the SCOADMIN program.1Select Printers and then Print Manager.2On the menu select Printer and then Add Remote followed by UNIX...3Enter the IP address of the print server, and type in the name of the printer that will be used to spool to.4Deselect Use External remote Printing Protocol...5To eject the printed page, add the command rp=lpaf to the /etc/printcap file.
1 - 11 UNIX® PRINTINGSCO UNIX® requires TCP/IP V1.2 or later to work with Brother print servers. You must first configure the /etc/hosts and /etc/printcap files as described in step 2. Then run the sysadmsh program as follows:1Select Printers.2Select Configure.3Select Add.4Enter the name of the print queue you entered in the /etc/printcap file as the Printer name.5Enter anything as the Comment, and Class name.6For the Use printer interface select Existing.7Press the F3 key to get a list of available interfaces, and select the desired one as the Name of interface using the cursor keys (Dumb is a good choice).8Select Direct as the Connection. 9Enter the desired Device name (/dev/lp generally works).10 Select Hardwired as the Device.11Select No for the Require banner field.Older SCO UNIX® SystemsThe Brother print servers support the FTP protocol. Earlier SCO UNIX® systems are often configured to print using the FTP protocol.IBM AS/400To use a Brother print server with an IBM AS/400 running IBM's TCP/IP gateways services for OS/400 (the OS/400 system must be v3.1 or later)Use the CFGTCP command at your OS/400 prompt to add the print server's TCP/IP address to the AS/400 host table.
UNIX® PRINTING 1 - 12Use the following one-line OS/400 command to create the LPD queue:CRTOUTQ OUTQ(<queuename> RMSTSYS(*INTNETADR) RMTPRTQ(<service>)AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER)MFRTYPMDL (<driver>)INTNETADR('<ipaddress>') TEXT('<description>')where <queuename> is the new AS/400 print queue name, <service> is the print server service name (BINARY_P1 or TEXT_P1) <driver> is the OS/400 printer driver name (*HP4 is recommended if in doubt), and <ipaddress> is the IP address of the print server. Note that the IP address and description must be enclosed in single quotes.For example:CRTOUTQ OUTQ(BR1) RMTSYS(*INTNETADR) RMTPRTQ(BINARY_P1) AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE(*OTHER) MFRTYPMDL(*HP5SI) INTNETADR('10.0.0.200') TEXT('Arnes Printer')If you are using A4 paper, you may find that the printer page formatting is incorrect (this is probably because your AS/400 system is set to Letter sized paper), to resolve this problem, do the following:Edit the Host Print Transform source code:RTVWSCST DEVTYPE(*TRANSFORM) MFRTYPMDL(*HP5SI) SRCMBR(HP5SI) SRCFILE(MYLIB/SRC)At the paper definition, alter the existing hex codes for Letter Size, 1B 26 6C 02 41 to hex codes for A4 Size, 1B 26 6C 32 36 41.
1 - 13 UNIX® PRINTINGOS/400 version 4, 5, 5.1You can also use the following command line to create a printer definition:    CRTDEVPRT DEVD(BR2) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) FONT(011) PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES) MFRTYPMDL(*HP5SI) PPRSRC1(*A4) PPRSRC2(*A4) RMTLOCNAME('10.0.0.200') SYSDRVPGM(*HPPJLDRV) TEXT('Arnes Printer')Other SystemsOther systems use similar programs to set up print servers. These programs will generally ask for the following information:Technical support specialists for these companies can usually answer configuration questions if you provide them with the equivalent UNIX® configuration information (tell them that the print server looks like a remote UNIX® host computer running the lpd line printer daemon).If you have not created a spool directory for the Brother print server on your UNIX® host computer, you will need to do so now (the printer setup utilities in HP-UX, AIX, Solaris 2.xx, and other systems will automatically create the spool directory). The lpd spool directory is usually located in the /usr/spool directory (check with your system manager to see if the location is different for your system). To create a new spool directory, use the mkdir command. For example, to create a spool directory for the queue laser1, you would enter:mkdir /usr/spool/lpd/laser1Requested information: You should use:remote printer Binary or Text service nameremote host computer name Any name (must match the name in the printcap file, if any) or in some cases, you may enter the print server IP address hereremote host IP address IP address of print server.
UNIX® PRINTING 1 - 14On some systems it is also necessary to start the daemon. This is done on Berkeley-compatible UNIX® systems with the lpc start command as shown in the following example: lpc start laser1Other Sources of Information1Visit http://solutions.brother.com for more information on network printing.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.
2 - 1 TCP/IP PRINTING22TCP/IP PrintingPrinting from Windows NT®4.0, Windows® 2000/XP, LAN Server and Warp ServerOverviewUsers of Windows NT®4.0 can print directly to a network-ready Brother printer using the TCP/IP protocol. Microsoft Windows NT®4.0 users must install Microsoft's "TCP/IP printing" protocol. Windows® 2000/XP users are able to send print jobs directly to the printer without installing any additional software. Brother's print server also supports transparent printing from IBM LAN Server and OS/2 Warp Server file servers, as well as from OS/2 Warp Connect workstations using the TCP/IP protocol. Quick Tips:1The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range:169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer. 1The default password for Brother print servers is access.2Windows NT®4.0 users must install the "Microsoft TCP/IP printing" protocol (available through the control panel applet).3Windows® 2000/XP users can print using TCP/IP using the standard Network Printing software and IPP protocol software built into any Windows®  2000/XP installation. For more information, see Windows® 2000/XP IPP Printing on page 5-9.
TCP/IP PRINTING 2 - 24Windows® 95/98/Me users can send print jobs using the IPP protocol via a Windows® 2000/XP computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and running on the Windows® 2000/XP computer and that the client PC is using version 4 or later of Microsoft Internet Explorer. For more information, see Windows® 2000/XP IPP Printing on page 5-9.5The default name for a Brother print server is usually BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address of the print server). Windows NT®4.0 and Windows® 2000/XP (TCP/IP) ConfigurationIf you have not already done so, install the TCP/IP protocol onto your Windows NT®4.0 system. This is done via the Network icon in the Control Panel window of the Windows NT®4.0 system (use the Start button on Windows NT®4.0 to access the Settings/Control Panel menu). The default configuration of Windows® 2000/XP automatically installs the TCP/IP protocol. Refer to the appropriate section in this chapter for more information.Windows® 2000/XP Printing (Printer Driver not yet installed)By default, Windows® 2000/XP systems install with all the necessary software required for you to be able to print. This chapter describes the two most commonly used configurations, Standard TCP/IP Port printing and IPP (Internet Printing Protocol). If you have already installed the printer driver, jump to the printer driver already installed section.Standard TCP/IP Port Printing1From the Printers folder select Add Printer. The Add Printer Wizard will now start. Click on Next.2Now select the Local Printer option and deselect the Automatically detect and install my Plug and Play printer option.
2 - 3 TCP/IP PRINTING3Click on Next.4You must now select the correct Network printing port. Select a new port from the pull-down window and select Standard TCP/IP Port.5When you have done that click Next.6The Add Standard TCP/IP Port Wizard will now appear. Click the Next button.7Enter the IP address, or name of the printer you wish to configure. The Wizard will automatically enter the Port name information for you.8Click the Next button.9Windows® 2000/XP will now contact the printer that you specified. If you did not specify the correct IP address or name then you will receive an error message.10Click the Finish button to complete the Wizard.11Now that you have configured the port, you must specify which printer driver you wish to use. Select the appropriate driver from the list of supported printers. If you are using a driver supplied with the printer on CD-ROM then select the Have Disk option to browse to the CD-ROM. You can also click the Windows Update button to connect directly to Microsoft's support Web site to download printer drivers.12When the driver is installed, click the Next button.13Specify a name and click the Next button.14Now specify if you wish to share the printer, enter the share name and click Next.15Continue through the Wizard clicking the Finish button when complete.
TCP/IP PRINTING 2 - 4Windows® 2000/XP Printing (Printer Driver already installed)If you have already installed the printer driver and wish to configure it for network printing, follow these steps:1Select the printer driver you wish to configure.2Select File and then choose Properties.3Click the Ports tab of the driver and click Add Port.4Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New Port... button.5The standard TCP/IP Port Wizard will start. Follow steps 6-10 of the “Standard TCP/IP Port Printing” section.Windows NT®4.0 PrintingIf you did not install the TCP/IP protocol during the installation of your Windows NT®4.0 system (either workstation or server) follow these steps. If you have already installed the TCP/IP protocol, proceed to the next section.1Go to the Start button, choose Settings, and then select Control Panel.2Run the Network applet by double clicking the Network icon and then click on the Protocols tab.3Select Add, and double click on the TCP/IP Protocol.4Insert the requested disk(s), or CD-ROM, to copy the required files.5Click the Close button. The Windows NT®4.0 system will review protocol bindings and then you will see the TCP/IP Properties dialog.6Configure the host IP address, subnet mask, and gateway address in that dialog. Consult your system manager for these addresses.
2 - 5 TCP/IP PRINTING7Click OK to exit (your Windows NT®4.0 workstation or server will need to be re-booted).Windows NT®4.0 Printing: Installing the Brother Peer to Peer Software1Start the CD-ROM installation menu program according to the Quick Setup Guide.2Select the desired Language and then select Install Software. Click For Administrators. Then select the Network Print Software installation program.3Click on Next in response to the Welcome message.4Select the Brother Peer to Peer Print (LPR) button.5Select the desired directory to install the Brother Peer to Peer Print (LPR) files and click on Next. The installation program will create the directory for you if it does not already exist on your disk.6Enter the Port name that you wish to use and click OK. The default port name is BLP1. Whichever name you choose, it must be unique and it MUST begin with BLP.7You must now enter the actual IP address of the print server in the IP Address field. If you have edited the hosts file on your computer or are using Domain Name System, you can also enter the name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network Configuration Page. By default the NetBIOS name will appear as BRN_xxxxxx where xxxxxx is the last six digits of the Ethernet address. See How to Print a Network Configuration Pageon page A-8 for information how to print the Network Configuration Page on your print server.8Click the OK button. When prompted you must re-boot your computer.
TCP/IP PRINTING 2 - 6Windows NT®4.0 Printing: Associating to the PrinterYou must now create a printer on your Windows® system using the standard Windows® printer setup procedure.1To do this, go to the Start button, select Settings and then Printers.2Double click the Add Printer icon to get the Add Printer Wizard.3Select My Computer (not Network Printer) and click on Next.4Select the Brother LPR Port (the port name you assigned in step 6 of the “Installing Brother Peer to Peer Software” section in this chapter) and click on Next.5Select the desired printer model. If the correct model is not displayed, click on the Have Disk option and insert the CD-ROM supplied with your printer.6If the driver already exists, select Keep Existing Driver (if it does not exist, this step will be skipped), and then click on Next.7If desired, change the name of the printer then click Next.8If desired, make the printer shared (so other user can access it), and select the operating system(s) that these other computers will be running. Click on Next.9Select Yes when you asked Would you like to print a test page?. Click on Finish to complete the installation. You may now print to the printer as if it were a local printer.
2 - 7 TCP/IP PRINTINGWindows NT®4.0 Printing: Adding a Second Brother LPR PortYou do not need to re-run the install program to add a new Brother LPR port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of the printer that you wish to configure, select File from the menu bar, and then choose Properties. Click on the Ports tab and click the Add Port button. In the Printer Ports dialog, highlight Brother LPR Port. Click the New Port button and enter the port name. The default port name is BLP1. If you have already used this name, you will get an error message if you try to use it again, in which case use BLP2, etc... Once you have specified the port name, click the OK button. You will then see the Port Settings dialog.Enter the IP address of the printer that you wish to print to and click OK. And then click Close in the Printer Ports dialog. You should now see the port that you have just created in the Print to the following port(s) setting of the printer driver.LAN Server, OS/2 Warp Server ConfigurationBrother print servers will work with IBM LAN Server, OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the file server (TCP/IP is supplied as standard with LAN Server V4.0 and later as well as Warp Server). Use the following procedure to configure the print server on an LAN Server or OS/2 Warp Server file server, or on an OS/2 Warp Connect workstation:Server ConfigurationMake sure that TCP/IP software is installed on your OS/2 file server. If you have not already done so, open the TCP/IP folder on the desktop, and double click on the TCP/IP Configuration icon to add the IP address to the OS/2 file server (consult your system manager for this address).Refer to chapter 9 for information on how to assign an IP address to the printer.
TCP/IP PRINTING 2 - 8Configuration of an OS/2 Server1From the OS/2 desktop open the Templates folder. Use the right mouse button to drag the Printer icon (not the Network Printer icon) onto the desktop.2The Create a Printer window should be open (if it is not, double click on the printer icon).3Type in any name for the printer.4Select the default printer driver. If the desired printer driver is not listed, click on the Install new Printer Driver button and add the driver.5Choose the output port. IBM TCP/IP automatically creates 8 named pipes called  \PIPE\LPD0 through to \PIPE\LPD7. Pick an unused port and double click on it.You will get the Settings window. Enter the following:You may leave the other entries blank. Click on the OK button. The pipe should be highlighted; if not, click on it. Click on the Create button to create the printer.Early versions of Warp Server have a bug in which the named pipes do not appear (the problem does not affect Warp Connect or LAN Server). This problem is fixed via a patch available from IBM.LPD server The Brother print server name (from the HOSTS file) or its IP address.LPD printer For most applications, use the Brother print server 'binary' service BINARY_P1. However, if you are printing text files from the DOS or OS/2 command prompt, you should use the text service TEXT_P1, which will add carriage returns for proper formatting of the data (but will potentially distort graphics printouts).Host name The IP name of the OS/2 file serverUser The IP address of the OS/2 file server
2 - 9 TCP/IP PRINTINGOpen the LAN Services folder and execute the LAN Requester program:1Select Definitions.2Select Aliases.3Select Printers.4Select Create. Enter the following:5Exit the LAN Requester program.6You should now be able to print. To test the queue, type the following from either the OS/2 command prompt or from a DOS workstation:7COPY C:\CONFIG.SYS \\servername\alias8Where servername is the name of the file server and alias is the alias name that you specified during this configuration process. This should print the CONFIG.SYS file on the printer. Note that if you selected a binary service as the LPD printer name, the lines will be staggered; don't worry about this because normal DOS, Windows®, and OS/2 applications will print OK.9The Brother print server will appear as a standard OS/2 printer to application programs. To make the print server operate transparently with DOS programs, execute the following command on each workstation:10NET USE LPT1: \\servername\aliasAlias Should be same as the printer name previously definedDescription Anything you wantServer name Name of OS/2 serverSpooler queue Name of printer as defined previouslyMaximum number of users Leave blank unless you want to limit the number of users
TCP/IP PRINTING 2 - 1011This will make the printer appear to the software as a printer that is directly connected to the parallel port of the workstation.Other Sources of Information1Visit http://solutions.brother.com for more information on network printing and for documents on the IPP protocol and how to configure a Windows® 2000/XP/95/98/Me System.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.
3 - 1 PEER TO PEER PRINTING33Peer to Peer PrintingHow to Print in a Windows® 95/98/Me Peer to Peer NetworkOverviewMicrosoft's Windows® 95/98/Me operating systems feature built-in networking capabilities. These capabilities allow a Windows® PC to be configured as a client workstation in a file server based network environment.For smaller networks, Windows® 95/98/Me also allows the PC to operate in a peer-to-peer mode. In this mode, the PC can share resources with other PCs on the network without the need for a central file server. Quick Tips:1The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address on your printer.3The default password for Brother print servers is access.
PEER TO PEER PRINTING 3 - 24Windows® 95/98/Me users can send print jobs using the IPP protocol via a Windows® 2000 computer providing that the Microsoft Internet Print Services software is installed on the client PC, IIS is installed and running on the Windows® 2000 and that the client PC is using version 4 or later of Microsoft Internet Explorer.5Brother printers are also compatible with HP JetDirect software, this means that you can use HP utilities to manage and to print to your Brother printer.Driver Deployment WizardThis installer includes the Windows® PCL driver and Brother network port driver (LPR and NetBIOS). If the administrator then installs the printer driver and port driver using this software, he can save the file to the File server or send the file in E-mail to users. Then, each user just clicks that file to have the printer driver, port driver, IP address, and so on, automatically copied to their PC. For more information, see the Driver Deployment Wizard User’s Guide on the CD-ROM.TCP/IP PrintingOur Peer to Peer printing software requires the TCP/IP protocol to be installed on your Windows® peer-to-peer computers and an IP Address has to be defined for the print server. Refer to your Windows® documentation for more information on how to configure the TCP/IP protocol on your Windows® PC.If you haven't already done so, configure the IP address of the printer, for more information on IP address configuration, refer to chapter 9 of this User’s Guide.
3 - 3 PEER TO PEER PRINTINGInstalling the Brother Peer to Peer Software1Start the CD-ROM installation menu program according to the Quick Setup Guide.2Select the proper model and then the Install Software menu.  Click For Administrators. Then select the Network Print Software menu to start the Brother Network Print Software installation program.3Click the Next button in response to the Welcome message.4Select the Brother Peer to Peer Print (LPR) button.5Select the desired directory to install the Brother Peer to Peer Print (LPR) files and click Next. The installation program will create the directory for you if it does not already exist on your disk.6Enter the Port name that you wish to use and click OK. The default port name is BLP1. Whichever name you choose, it must be unique and it MUST begin with BLP.7You must now enter the actual IP address of the print server in the Printer name or IP address field. If you have edited the hosts file on your computer or are using Domain Name System, you can also enter the name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network Configuration Page. By default the NetBIOS name will usually appear as BRN_xxxxxx where xxxxxx is the last six digits of the Ethernet address. See How to Print a Network Configuration Page on page A-8 for information how to print the Network Configuration Page on your print server.If you already installed the driver from the printer’s CD-ROM Installer and you selected "Brother Peer-to-Peer Network Printer" during the installation then you do not need to install the Brother Network Print Software again.
PEER TO PEER PRINTING 3 - 48Click the OK button. When prompted you must re-boot your computer.Associating to the PrinterYou must now create a printer on your Windows® system using the standard Windows® printer setup procedure. 1To do this, go the Start button, select Settings and then Printers.2Select Add Printer to begin the printer installation.3Click Next when you get the Add Printer Wizard window.4Select Local Printer when you are asked how the printers are connected to your computer, and then click Next.5Select the correct driver. Click Next when you are done.6If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next.7Select the Brother LPR port (the port name you assigned in step 6 of the “Installing the Brother Peer to Peer Software” section) and click Next.8Enter any desired name for the Brother printer and click Next. For example, you could call the printer "Networked Brother Printer".9Windows® will now ask you if you wish to print out a test page, select Yes and then select Finish.Windows® 95/98/Me store the hosts file in the default Windows® directory. By default, the Windows® hosts file is called hosts.sam. If you wish to use the hosts file you must rename the file to hosts with no extension. The .sam extension stands for sample.
3 - 5 PEER TO PEER PRINTINGYou have now finished installing the Peer to Peer Print (LPR) software.Adding a Second Brother LPR PortYou do not re-run the install program to add a new Brother LPR port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of the printer that you wish to configure, select File from the menu bar, and then choose Properties. Click on the Details tab and click the Add Port button. In the Add Port dialog, select the Other radio button and then highlight Brother LPR port. Click OK and enter the port name. The default port name is BLP1. If you have already used this name, you will get an error message if you try to use it again, in which case use BLP2, etc... Once you have specified the port name, click the OK button. You will then see the Port Properties dialog. Enter the IP address of the printer that you wish to print to and click OK. You should now see the port that you have just created in the Print to the following port setting of the printer driver.Other Sources of Information1Visit http://solutions.brother.com for more information on network printing.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.
NETBIOS PEER TO PEER PRINTING 4 - 144NetBIOS Peer to Peer PrintingHow to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT®4.0, LAN Server and OS/2 Warp ServerOverviewBrother print server range supports SMB (server message block) over the TCP/IP protocol via the NetBIOS interface. This means that just like regular Windows® PC's, Brother printers can appear in your network neighborhood. The main advantage of NetBIOS printing is that you are able to print from legacy DOS applications that are running on PC's that are connected to Microsoft networks.Quick Tips:1The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address on your printer. 3The default password for Brother print servers is access.4The default domain name of the print server is WORKGROUP, to change it use your web browser or the BRAdmin application.
4 - 2 NETBIOS PEER TO PEER PRINTINGPrint Server ConfigurationIn order for this function to work, you must correctly change the domain name or workgroup name to match that of your network. Once this is done, the print server will appear automatically in your network neighborhood and you will be able to send print documents to it without having to install additional software. However, in some instances you may find that your Windows® 95/98/Me/2000/XP and Windows NT®4.0 systems may receive "Printer is busy" error messages when more than one person attempts to access the printer. In this instance Brother has provided the "Brother NetBIOS Port Monitor" software which allows users to continue spooling print jobs while the printer is busy, down or out of paper. The port monitor will hold the jobs until the printer is again available.When you install Windows® 95/98/Me you are asked which workgroup you belong to. The default workgroup name for Windows® 95/98/Me is WORKGROUP, however you could change this to anything you want. With Windows NT®4.0, Microsoft introduced the concept of "Domains". A domain offers centralized security management whereas a workgroup offers distributed security management. The print server does not care if your network consists of a Workgroup or a Domain, the only thing you must tell it is the name of the workgroup or domain. The Brother print server automatically has a default workgroup/domain name of WORKGROUP. If you need to change name, you can configure the Brother print server to recognize this. There are four ways of doing this. (If you are unsure about the name of your workgroup or domain, look in the identification tab in your network applet).■Use BRAdmin (This utility can use the TCP/IP protocol or NetWare® IPX protocol - no file server necessary.)■Use a Web browser (the print server must have a valid IP address and your computer must also have a valid IP address); you can configure the IP address by using BRAdmin. ■TELNET, again your computer and printer must have a valid IP address.■Use BRCONFIG for DOS (this utility requires a NetWare® file server and the IPX protocol).
NETBIOS PEER TO PEER PRINTING 4 - 3Changing the Workgroup/Domain Name Using TELNET or BRCONFIG or a Web BrowserIf you are unable to use the BRAdmin application, you can use TELNET, a web browser or the BRCONFIG Remote console program (BRCONFIG requires the IPX/SPX protocol to be installed on your PC).When you are connected to the print server, enter the default password access in response to the # prompt. Type in anything in response to the Enter Username> prompt, you will then be at the Local> prompt.Now enter the command:SET NETBIOS DOMAIN domainnameEXITWhere domainname is the name of the domain or workgroup that you are on. If you are not sure what your domain name or workgroup name is, look in the Identification tab in your Windows® 95/98/Me and Windows NT®4.0 network applet.You can also use a standard WWW browser to change the NetBIOS name. To do this, connect to the print server using its IP address and then select the Configure NetBIOS option from the Network Configuration screen, then enter your workgroup/domain name into the Domain Name text box. Make sure you submit the changes (click on the Submit button).Because of the way that Microsoft networks work, the print server may take several minutes to appear in the network neighborhood. You will also find that the print server may take several minutes to disappear from the network neighborhood even if the printer is switched off. This is a feature of Microsoft workgroup and domain based networks.
4 - 4 NETBIOS PEER TO PEER PRINTINGNetBIOS Port Monitor for Windows® 95/98/Me/2000/XP and Windows NT®4.0This software requires the TCP/IP transport protocols to be installed on your Windows® 95/98/Me/2000/XP and Windows NT®4.0 computer. To install those protocols refer to your Windows® documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC.Installing the Brother NetBIOS Port Monitor1Start the CD-ROM installation menu program according to the Quick Setup guide. 2Select the proper model and then the Install Software menu. Click For Administrators. Then select the Network Print Software menu to start the Brother Network Print Software installation program.3Click the Next button in response to the Welcome message.4Select Brother Peer-to-Peer Print (NetBIOS) installation5Select the desired directory to install the Brother Network Direct Print files and click Next.6Enter the port name that you wish to use. The port name must start with "BNT". For example BNT1. Whichever name you choose, it must be unique. Then click OK. The name must be unique on your PC, however other computers can use the same port name as the name you specify on your PC.If you already installed the driver from the printers CD-ROM Installer and you selected "Brother Peer-to-Peer Network Printer" during the installation then you do not need to install the Brother Network Print Software again.
NETBIOS PEER TO PEER PRINTING 4 - 57You must now enter the server name and port name for the actual print server. You can use the Browse button to search for the print server, select the domain/workgroup name, and then the server is listed. If the print server does not automatically appear in your browse list, then you must ensure that the domain name is configured correctly. Otherwise you must enter the name manually. The name should be compliant with UNC (Universal Name Convention). For example:  \\NodeName\ServiceName.Where NodeName is the NetBIOS name of the Brother print server (the default name is usually BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address), and ServiceName is the service name for NetBIOS of the print server. By default it is BINARY_P1. For example:\\BRN_310107\BINARY_P18Then click OK.9Click the Finish button. You must now restart your computer before you can continue.Associating the Printer 1You must now create a printer on your Windows® 95/98/Me, Windows NT®4.0 and Windows® 2000/XP systems using the standard Windows® printer setup procedure. To do this, go the Start button, select Setting and then Printers.Windows® 95/98/Me2Select Add Printer to begin the printer installation.3Click Next when you get the Add Printer Wizard window.You can find the NetBIOS name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print serer.
4 - 6 NETBIOS PEER TO PEER PRINTING4Select Local Printer when you are asked how the printer is connected to your computer, and then click Next.5Select the correct driver. Click Next when you are done.6If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next.7Select the Brother NetBIOS Port (the port name you assigned in step 6 of the “Installing the Brother NetBIOS Port Monitor” section and click Next.8Enter any desired name for the Brother printer and click Next. For example, you could call the printer "Networked Brother Printer".9Windows® will now ask you if you wish to print out a test page, select Yes and then select Finish.You are now ready to print. If necessary, you can share the printer on your PC so that all print jobs are routed through your computer. Windows NT®4.0 /Windows® 2000/XP 2 Select Add Printer to begin the printer installation.3Click Next when you get the Add Printer Wizard window.4Select Local printer (Windows® 2000) or Local printer attached to this computer (Windows® XP) when you are asked how the printer is connected to your computer, and then click Next.5Select the Brother NetBIOS Port (the port name you assigned in step 6 of the “Installing the Brother NetBIOS Port Monitor” section and click Next.6Select the correct driver. Click Next when you are done.7If you have selected a printer driver that is already used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next.
NETBIOS PEER TO PEER PRINTING 4 - 78Enter any desired name for the Brother printer and click Next. For example, you could call the printer "Networked Brother Printer".9Select Not Shared or Shared and Share Name and click Next. 10Windows® will now ask you if you wish to print out a test page, select Yes and then select Finish.You are now ready to print. If necessary, you can share the printer on your PC so that all print jobs are routed through your computer. Adding a Second NetBIOS Print Port 1You do not need to re-run the installation program to add a new NetBIOS port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of the printer that you wish to configure, select File from the menu bar, and then choose Properties. Windows® 95/98/Me2Click on the Details tab and click the Add Port button. In the Add Port dialog, select the Other radio button and then highlight Brother NetBIOS port. Click OK and enter the port name. The default port name is BNT1. If you have already used this name, you will get an error message if you try to use it again, in which case use BNT2, etc... Once you have specified the port name, click the OK button. You will then see the Port Properties Dialog. Enter the print server and port name of the printer that you wish to print to and click OK. You should now see the port that you have just created in the Print to the following port setting of the printer driver.
4 - 8 NETBIOS PEER TO PEER PRINTINGWindows NT®4.0 / Windows® 2000/XP 2Click on the Ports tab and click the Add Port button. In the Add Port dialog, highlight Brother NetBIOS port. Click New Port and enter the port name. The default port name is BNT1. If you have already used this name, you will get an error message if you try to use it again, in which case use BNT2, etc... Once you have specified the port name, click the OK button. You will then see the Port Properties Dialog. Enter the print server and port name of the printer that you wish to print to and click OK. You should now see the port that you have just created in the Print to the following port setting of the printer driver.LAN Server/OS/2 Warp Server ConfigurationAs Brother print servers support the SMB protocol over TCP/IP via a NetBIOS interface, you can easily configure your printer to work with an IBM LAN Server and OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the fileserver. Use the following procedure to configure the LAN Server, OS/2 Warp Server or OS/2 Warp connect workstation.Server Configuration:1Open the Templates folder on the OS/2 desktop.2Using the right mouse button, drag the Printer template onto the desktop.3Type in any desired name for the printer from the Create a Printer window.4Choose an unused port (for example, LPT3) to connect to the printer.5Choose the appropriate printer driver from the list.6Click Create and then OK.7If desired, indicate whether you want to share the printer.
NETBIOS PEER TO PEER PRINTING 4 - 9Workstation Configuration:On each workstation that you wish to print from, execute the following step:Go to the DOS or OS/2 command prompt and enter the command:NET USE LPTx: \\NodeName\ServiceNameWhere x is the LPT port number (1 through 9), NodeName is the NetBIOS Name of the print server (usually BRN_xxxxxx by default, where xxxxxx is the last six digits of Ethernet address) and ServiceName is the service name of the print server (BINARY_P1 by default). For example:NET USE LPT2: \\BRN_310107\BINARY_P1Other Sources of Information1Visit http://solutions.brother.com for more information on network printing. 2Refer chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.You can find the NetBIOS name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.
5 - 1 CONFIGURING INTERNET PRINTING FOR WINDOWS®55Configuring Internet Printing for Windows®Internet Printing InstallationOverviewBrother's Brother Internet Print (BIP) software, for Windows® 95/98/Me and Windows NT®4.0, allows a PC user at one location to send a print job to a Brother Printer at a remote location via the Internet. For example, a user on a PC in New York could print a document directly from his Microsoft Excel application program to a printer in Paris.Windows® 2000/XP users can also use this BIP software, but are recommended to use the IPP protocol support that is part of the Windows® 2000/XP operating systems. Skip to the "Windows® 2000 IPP Printing" section of this document.Quick Tips:1The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address on your printer.3The default password for Brother print servers is access. 4Windows® 2000/XP users can print using TCP/IP using the standard Network Printing software and IPP protocol software built into any Windows® 2000/XP installation.
CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 25Windows® 95/98/Me users can send print jobs using the IPP protocol via Windows® 2000 computer, provided that the Microsoft Internet Print Services software is installed on the client PC, Internet Information Server (IIS) is installed and running on the server and that the client PC is using version 4 or later of Microsoft Internet Explorer.Brother Internet Print General InformationThe BIP software is installed using a standard Windows® 95/98/Me/2000/XP and Windows NT®4.0 Installation Wizard. It creates a virtual port on the Windows® 95/98/Me/2000/XP and Windows NT®4.0 PC that operates in a similar way to the standard LPT1 printer port from the application program point of view. The user can use the Windows® 95/98/Me/2000/XP and Windows NT®4.0 Print Manager to create a printer that uses this port along with a standard Windows® 95/98/Me/2000/XP and Windows NT®4.0 compatible printer. Any Windows® 95/98/Me/2000/XP and Windows NT®4.0 applications program can therefore print to this printer (and hence to the virtual port) without modification or operational procedure.When a job is printed to the BIP virtual port, it is actually MIME-encoded (converted to a standard Internet E-mail message) and sent out to a Brother print server at the remote location. This means that BIP is compatible with most common E-mail software packages. The only requirement is that the E-mail server be capable of sending E-mail message over the Internet.In more detail, the procedure works in the following way:■If you are connected to a Local Area Network, the E-mail message is passed to the E-mail server, which in turn transmits the message out over the Internet using the SMTP protocol (simple mail transport protocol) to the remote print server.■If you are connecting via a modem directly to an Internet Service Provider (ISP), the ISP handles the routing of the E-mail to the remote print server.
5 - 3 CONFIGURING INTERNET PRINTING FOR WINDOWS®■At the remote site, an E-mail server receives the E-mail message. The remote print server, which has its own E-mail address, uses the POP3 protocol (Post Office Protocol 3) to download the E-mail message from the e-mail server. It then decodes the attachment and prints it out on the printer.Brother Internet Print: Configuring the Brother Print ServerThe print server can be configured using BRAdmin, by using a web browser, or by using the TELNET command. Print Server Configuration Checklist1Configure the POP3 server on the E-mail server at the remote site with a mail account (Mailbox name) and password for the Brother print server (generally, the mail account name will be the first part of the E-mail address; for example, if you assign the E-mail address emailprinter@xyz.com, then the mail account name would be emailprinter). 2Make sure that the print server is installed and running with TCP/IP enabled and has a valid IP address assigned to it.Because access to the E-mail server on most networks is usually restricted, you may need to have your network administrator check the configuration and add the mail account. If an E-mail is received that has not been configured to use the BIP virtual port driver, the printer will print the E-mail out as a text document.Before configuring the print server to receive BIP jobs, be sure that the E-mail server at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and SMTP protocols (SMTP is only required if the notification feature is enabled).
CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 4Brother Internet Print: Using BRAdmin to Configure the Print ServerThe steps required to configure the print server to receive print jobs from a Windows® 95/98/Me/2000/XP and Windows NT®4.0 PC running the BIP software is as follows:1Start BRAdmin.2Select the node name of the desired Brother print server from the list and double click on it. (the default node name is usually BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). You will be prompted for a password; the default password is access.3Click on the POP3/SMTP tab.4Enter the address of the POP3 server (consult your network administrator if you do not know this address).5Enter the mailbox name for the remote Brother print server. Usually this will be the first part of the E-mail address (for example, if the E-mail address of the print server is emailprinter@xyz, then the mailbox name would be emailprinter).6Enter the password for the mailbox, if any.Skip this section if you wish to use the print server remote console or Web Browser to configure the print server.Using the BRAdmin Professional utility, you can configure the Brother print server using the TCP/IP protocol, or the IPX protocol.You can find the node name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.
5 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS®7The print server is configured by default to poll the POP3 server every 30 seconds. You may change this value, if desired.8If you have enabled notification, enter the address of your SMTP server (consult your network administrator if you do not know this address).9Click the OK button and save the changes. Now exit the BRAdmin application. You have now configured the print server to receive print jobs.Brother Internet Print: Using a Web Browser to Configure the Print Server  1Connect to the print server IP address using your web browser.2When you reach the network configuration screen, you will be prompted for a password. The default password is "access".3Select the Configure POP3/SMTP option and enter the information as described above. Refer to "Brother Internet Print: Using a Web Browser to Configure the Print Server".4You should see a Segmented Message Timeout option. If a print job is separated into multiple E-mail messages using the Partial E-mail Print feature of the BIP, this value indicates how long the print server will wait for all of the segments of the message to arrive.Brother Internet Print: Using TELNET to Configure the Print Server Skip this section if you used BRAdmin or a Web Browser to configure the remote print server.As an alternative to BRAdmin, you can use the print server remote console to configure the print server. The console can be accessed via TELNET. When you access the print server using these utilities, you will be asked for a password. The default password is access.
CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 61When you get the Local> prompt after connecting to the console, enter the command:SET  POP3  ADDRESS  addresswhere ipaddress is the address of your POP3 server (consult with your network administrator if you do not know this address).2Enter the command:SET  POP3  NAME  mailboxname SET  POP3  PASSWORD  emailpasswordwhere mailboxname is the name of the remote print server mailbox and emailpassword is the password associated with this mailbox. Usually the mailbox name is the same as the first part of the E-mail address that you defined previously (for example, usually if the E-mail address is emailprinter@xyz.com, then the mailbox name is emailprinter).3The print server is set by default to poll the POP3 server every 30 seconds. If you wish to change this value, enter the command:SET  POP3  POLLING  ratewhere rate is the polling rate in seconds.Type EXIT to exit the console and save the changes. You have now completed configuring the print server.Brother Internet Print: Installing the BIP Software on Windows® 95/98/Me/2000/XP and Windows NT®4.0To install the BIP software on a Windows® 95/98/2000/XP and Windows NT®4.0 PC, execute the following steps:■Be sure that the PC is running an E-mail program (for example, Microsoft Outlook) that is capable of sending E-mail message using Winsock.■Be sure that your E-mail server is capable of sending messages across the Internet.
5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS®Setup from CD-ROM1Start the CD-ROM installation menu program according to the Quick Setup Guide.2Select the proper model and Install Software menu. Click For Administrators. Then select the Network Print Software menu to start the Brother Network Print Software installation program.3Click the Next button in response to the Welcome message.4Select the Brother Internet Print button.5Select the desired directory to install the BIP files and then click Next. The installation program will create the directory for you if it does not already exist.6You will then be asked for a port name. Enter the name of the port. The port name must begin with the BIP and end with a number, for example, BIP1.7You will then see a message about Partial E-mail Print. Partial E-mail Print is the ability of the Brother Internet Print software to break down E-mail Print jobs into smaller sections to prevent a mail file size limitation problem for the mail server.8Click OK to continue.9You will then be asked to enter the port settings for the remote print server:Enter any unique legal Internet E-mail address for the remote print server (for example emailprinter@xyz.com). Note that Internet E-mail addresses cannot have spaces in them.Enter your E-mail address and the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address). Also specify if you are going to use the Partial E-mail Print option and the Notification type.10Click OK to continue. You will then be asked to re-start your computer.
CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 811Once your computer has re-started you must create a printer on your Windows® 95/98/Me/2000/XP and Windows NT®4.0 system using the standard Windows® 95/98/Me/2000/XP and Windows NT®4.0 printer setup procedure. To do this, go the Start button, select Settings and then Printers.12Select Add Printer to begin the printer installation.13Click Next when you get the Add Printer Wizard window.<For Windows® 95/98/Me users>14Select Local Printer when you are asked how the printers are connected to your computer and click Next.<For Windows NT®4.0 and Windows® 2000/XP users> 14Select Local Printer when you are asked how the printer is connected to your computer, and then click Next.<For Windows® 95/98/Me users>15Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click Have Disk to load the driver from the CD-ROM. Click Next when you are done.16If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next.17Select the Brother Internet port (BIP...) which you selected in step 6 and click Next.<For Windows NT®4.0 and Windows® 2000/XP users>15Select the Brother Internet port (BIP...) which you selected in step 6 and click Next.16Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click Have Disk to load the driver from the CD-ROM. Click Next when you are done.
5 - 9 CONFIGURING INTERNET PRINTING FOR WINDOWS®17If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next.18Enter any desired name for the BIP remote printer and click Next. Note that this name does not need to match the port name that you assigned in step 6, or E-mail address that you assigned in step 9. 19Select No when asked if you want to print a test page, unless you have already configured the remote print server to receive BIP print jobs.You have now finished installing the BIP software. If you need to configure another remote print server, go to the next section, “Adding a Second Brother Internet Port”.Adding a Second Brother Internet PortYou should not re-run the install program to add a new Brother Internet Port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of a printer that is using BIP, select File from the menu bar, and then choose Properties. Click on the Details (Ports on Windows NT® 4.0, Windows® 2000/XP) tab and click the Add Port button.In the Add Port dialog, select the Other radio button (Windows® 95/98/Me only) and then Brother Internet Port. Click OK (New Port on Windows NT® 4.0, Windows® 2000/XP) and it will give you the Port Name text box. Any unique name can be given here as long as it starts with "BIP" and another port does not already exist with the same name.Windows® 2000/XP IPP PrintingUse the following instructions if you wish to use the IPP printing capabilities of Windows® 2000/XP.1Run the Add Printer Wizard and click the Next button when you see the Welcome to the Add Printer Wizard screen.
CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 102You are now able to select Local Printer or Network Printer. For Windows® 2000: Make sure that you select Network Printer.For Windows® XP: Make sure that you select A Network Printer, or a Printer attached to another computer.3You will see the Add Printer Wizard screen.4For Windows® 2000: Select  Connect to a printer on the Internet or on your intranet and then enter the following in the URL field: http://printer_ip_address:631/ipp (Where printer_ip_address is the IP address or DNS name of your printer).For Windows® XP: Select  Connect to a printer on the Internet or on a home or office network and then enter the following in the URL field: http://printer_ip_address:631/ipp (Where printer_ip_address is the IP address or DNS name of your printer).5When you click Next, Windows® 2000/XP will make a connection with the URL that you specified.If the printer driver has already been installed:If the appropriate printer driver is already installed on your PC, Windows® 2000/XP will automatically use that driver for use. In this case, you will simply be asked if you wish to make the driver the default driver, after which the Driver installation Wizard will complete. You are now ready to print.If the printer driver has NOT been installed:One of the benefits of the IPP printing protocol is that it establishes the model name of the printer when you communicate with it. After successful communication you will see the model name of the printer automatically. This means that you do not need to inform Windows® 2000 the type of printer driver to be used.6Click OK. You will then see the printer selection screen in the Add Printer Wizard.7If your printer is not in the list of supported printers, click the Have Disk button. You will then be asked to insert the driver disk.
5 - 11 CONFIGURING INTERNET PRINTING FOR WINDOWS®8Click the Browse button and select the CD-ROM or network share that contains the appropriate Brother printer driver.9Now specify the model name of the printer.10If the printer driver that you are installing does not have a Digital Certificate you will see a warning message. Click Yes to continue with the installation. The Add Printer Wizard will then complete.11Click the Finish button and the printer is now configured and ready to print. To test the printer connection, print a test page.Specifying a Different URLPlease note that there are several possible entries that you can enter for the URL field.http://printer_ip_address:631/ippThis is the default URL and we recommend that you use this URL. Please note the Get More Info option will not display any printer data.http://printer_ip_address:631/ipp/port1This is for HP JetDirect compatibility. Please note the Get More Info option will not display any printer data.http://printer_ip_address:631/If you forget the URL details, you can simply enter the above text and the printer will still receive and process data. please note the Get More Info option will not display any printer data.If you are using the built in service names that the Brother print server supports, you can also use the following: (However, please note the Get More Info option will not display any printer data).http://printer_ip_address:631/brn_xxxxxx_p1http://printer_ip_address:631/binary_p1http://printer_ip_address:631/text_p1http://printer_ip_address:631/postscript_p1http://printer_ip_address:631/pcl_p1http://printer_ip_address:631/brn_xxxxxx_p1_atWhere printer_ip_address is the IP address of the printer.
CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 12Other Sources of Information1Visit http://solutions.brother.com for more information on network printing and for documents on the IPP protocol and how to configure a Windows® 2000/95/98/Me System.2Visit Microsoft's web site for the "Microsoft Internet Print Services" software for Windows® 95/98/Me. 3Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.
6 - 1 NOVELL® NETWARE® PRINTING66Novell® NetWare® PrintingHow to Configure Novell® NetWare® PrintingOverviewBrother print servers allow NetWare® client PCs to print jobs on the same printer as TCP/IP or other network protocol users. All NetWare® jobs are spooled through the Novell® server and delivered to the printer when it is available.Quick Tips:1If you create a NDPS Printer for Netware® 5, you have to configure the IP address of the print server in advance.The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer.2The default password for Brother print servers is access.
NOVELL® NETWARE® PRINTING 6 - 2General InformationIn order to use a Brother print server on a NetWare® network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the file server's print queue, and the jobs are then spooled (either directly, or in the case of remote printer mode, via an intermediate NetWare® print server) to the appropriate Brother print server.The system administrator can create Bindery (NetWare® 3), NDS (NetWare® 3 and NetWare® 4) based queues in a single environment without having to switch between applications by using the BRAdmin application.NetWare® 5 users wishing to configure an NDPS printer must use the NWADMIN application supplied with NetWare® 5. Please note that it is possible to create IPX BINDERY or NDS based queues on a NetWare® 5 system using the BRAdmin application.You must install the Novell® NetWare® Client 32 if you wish to create queue information on your NetWare® servers using the BRAdmin application.If you can't use the BRAdmin application in your environment, you can create the queue using the traditional NetWare® PCONSOLE utility or NWADMIN utilities, but you will then also need to use the Brother BRCONFIG utility, TELNET or a WWW browser to configure the print server.Brother print servers can service up to 16 file servers and 32 queues.
6 - 3 NOVELL® NETWARE® PRINTINGCreating a NDPS Printer Using NWADMIN for NetWare® 5With NetWare® 5, Novell® has released a new preferred printing system called Novell® Distributed Print Services (NDPS). Before the print server can be configured, NDPS must be installed on the NetWare® 5 server and an NDPS Manager configured on the server.NDPS ManagerThis creates a NDPS manager that interacts with services running at the server and manages an unlimited number of printer agents.You have to create an NDPS manager within an NDS tree before creating server-based printer agents. If the NDPS manager controls a printer attached directly to the server, you must load the manager on the server that the printer is attached to.1In NetWare® administrator, navigate to the area you want the NDPS manager to reside. Select Object | Create | NDPS Manager and click OK.2Enter an NDPS manager name.3Browse to a server (which has NDPS installed but no NDPS manager installed) where you want to install the NDPS manager and then to the volume you want the NDPS manager database assigned to. Click create.For further information regarding NDPS printers and printing, see the Other Sources of Information section at the end of this chapter.
NOVELL® NETWARE® PRINTING 6 - 4NDPS BrokerWhen NDPS is installed, an NDPS broker is loaded onto the network. One of the Broker services Resource Management Service allows Printer Drivers to be installed onto the server for use with Printer Agents.To add a Printer Driver to the Broker:1Make sure the Resource Management Service is enabled.2Open the Broker Object's main window in NetWare® Administrator3Select the Resource Management view.4The Resource Management dialog appears. Select the Add Resources button.5When the Manage Resources dialog appears, select the icon for the type of driver you want to add. This will be a 3.1x, 95/98/Me or NT4.0 driver for NetWare® 5 (Additionally, a Windows® 2000 driver is available for NetWare® 5.1). If you are using NDPS version 1 with NetWare® 4.x, only 3.1x and 95/98/Me options will be available. NDPS version 2 for NetWare® 4.x will support Windows NT®4.0 drivers automatic download.6A complete list of currently loaded resources of that type appears in the Current Resources window. Click the Add button.7The Add <resource type> dialog appears. The listed resources that appear on this screen are currently installed.8Click the Browse button to locate the driver you want to add to the list. The driver list appears possibly showing several printers. This should be the driver in the different languages.
6 - 5 NOVELL® NETWARE® PRINTINGCreating a Printer Agent Follow the steps below to create a Printer Agent for the control access printer (NDS object).1In NetWare® Administrator, select object | create | NDPS Printer. Enter the NDPS printer name.2If this is a new printer select create A New Printer Agent.3If there is already an NDS printer and you are upgrading it to use the NDPS scheme, select Existing NDS printer object. You will then have to select which printer object you wish to upgrade.4Enter the name you wish the Printer Agent to be referred to by, and either type the name of the NDPS Manager or click the reference button and select a NDPS Manager. Select Novell Printer Gateway for the Gateway type and click OK.5Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK.6You must now specify the type of connection that you are going to use. There are four possible options. Select the LPR over IP option.7Enter the relevant details of the printer, and Brother recommends typing Binary_P1 for the printer name. Click finish and wait. Select the printer drivers for the client operating systems.Follow the steps below to create a Printer Agent for the public access printer.1In NetWare® Administrator, double click NDPS Manager.2Click Printer Agent List.3Click New.4Enter the name you wish the Printer Agent to be referred to by, and select Novell Printer Gateway for the Gateway type and click OK.
NOVELL® NETWARE® PRINTING 6 - 65Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK.6You must now specify the type of connection that you are going to use. There are four possible options. Select the LPR over IP option.7Enter the relevant details of the printer and Brother recommends typing Binary_P1 for the printer name. Click finish and wait. Select the printer drivers for the client operating systems.You are now ready to print.Configuring NetWare® 3 and NetWare® 4 SystemsBrother's BRAdmin application provides similar functionality to the NetWare® PCONSOLE utility (or the NWADMIN utility in NetWare® 4.1x or later). To use the BRAdmin application to configure a Brother print server under NetWare®, make sure that you are logged in as SUPERVISOR (NetWare® 2.xx or 3.xx) or ADMIN (NetWare® 4.1x or later) and perform the appropriate steps as detailed in the following pages.Creating the NetWare® Print Server (Bindery Queue Server) Using BRAdmin Professional Utility1Make sure that you logged in as SUPERVISOR (NetWare® 2.xx or 3.xx) or ADMIN (NetWare® 4.xx or later).2Start BRAdmin.You must install the Novell® NetWare® Client 32 if you wish to create queue information on your NetWare® servers by BRAdmin.
6 - 7 NOVELL® NETWARE® PRINTING3One or more print servers will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). 4Select the print server that you wish to configure and double click it. You will be asked for a password. The default password is  access.5Select the NetWare® tab. aIf it is not already selected, select Queue Server as the operating mode. bClick the Change Bindery Queues button.cSelect the NetWare® server which you wish to configure.dSelect the New Queue button and type in the queue name which you wish to create.eOnce you have done that highlight the queue name you created and click on the Add button.fClick on Close and then OK.Now exit the BRAdmin application. You are ready to print.You can find the node name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.If necessary change the NetWare Print Server Name. The default NetWare® print server name will usually be BRN_xxxxxx_P1 where xxxxxx is the Ethernet address of the print server. Be careful! Changing the name may impact the configuration of other protocols because the print server service names will be altered.
NOVELL® NETWARE® PRINTING 6 - 8Creating the NetWare® Print Server (NDS Queue Server) Using BRAdmin Professional Utility1Make sure that you logged in as ADMIN in NDS mode.2Start BRAdmin.3One or more print server services will appear in the list (the default node names are BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)).4Select the printer that you wish to configure and double click it. You will be asked for a password. The default password is  access.5Select the NetWare tab. aIf it is not already selected, select Queue Server as the operating mode.bSelect the correct NDS tree and NDS context (you can manually enter this information, or by clicking on the down arrow by the side of NDS tree and the Change button by the side of NDS Context, you can let BRAdmin display your choices automatically). Once you have specified this information, click on the Change NDS queues button.cIn the NetWare Print Queues screen select the appropriate TREE and Context and then click the New Queue button.dEnter the queue name and specify the volume name. If you do not know the volume name, select the Browse button to browse the NetWare® volumes. When the information is entered correctly, select the OK button.You can find the node name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.
6 - 9 NOVELL® NETWARE® PRINTINGeYour queue name will appear in the TREE and Context that you specified. Select the queue and click on Add. The queue name will then be transferred to the Service Print Queues Window. You will be able to see the TREE and Context information along with the queue name information in this Window.fClick on the Close button. Your Brother print server will now log into the appropriate NetWare® server.Now exit the BRAdmin application. You are ready to print.Creating the NewWare® Print Server (NDS Queue Server) Using Novell® NWADMIN and BRAdmin Professional UtilityIf you do not wish to use the Brother BRAdmin application solely to configure your NetWare® file server, use the following instructions for configuration using the NWADMIN application in conjunction with the BRAdmin application.1Make sure that you are logged in as ADMIN in NDS mode on the NetWare® 4.1x (or later) file server and start the NWADMIN application.2Select desired Context that will contain the Printer and then click on Object from the menu bar and then Create. When you get the New Object menu, select Printer and then OK. 3Enter the name of the printer and select Create.4Select the desired Context that will contain the default print queue, and then click on Object and Create to get the New Object menu. 5Select Print Queue and then OK. Make sure that Directory Service Queue is selected and then type in a name for the default print queue.6Click on the button to select the print queue volume. Change the directory context if necessary, then select the desired volume (from Available Objects) and click OK. Click Create to create the print queue.
NOVELL® NETWARE® PRINTING 6 - 107Change context if required and then double click the name of the printer you created in step 3.8Click Assignments.9Click Add.10Change the context if necessary.11Select the print queue you created in step 5.12Click Configuration and set the Printer type to Other/Unknown. Click OK. 13Change the context if required, select Object from the menu bar and then Create. When you get the New Object menu, select print server and then OK. 14Enter the name of the print server and select Create.You can find the current service name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.Important: Do not assign a password to the print server or it will not log in.15Double click on the name of your print server. Click on Assignments and then Add... 16If necessary, change the directory context. Select the printer you created in step 3 and click OK and then OK again.17Exit NWADMIN.Enter the NetWare® print server name of the print server exactly as it appeared in the NetWare® tab of the BRAdmin application (this will generally be the BRN_xxxxxx_P1 default service name, unless you changed the name).
6 - 11 NOVELL® NETWARE® PRINTING18Start the appropriate BRAdmin application, and select the correct print server from the list (by default, the node name is BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)).19Double click the appropriate Brother print server. You will be prompted for a password, the default password is access. Now select the NetWare®  tab.20Select Queue Server as the operating mode.The same service assigned by NetWare® server name cannot be used for both queue server mode and remote printer mode.21Enter the NDS tree name (note that a print server can service both NDS and bindery queues).22Type in the name of the context where the print server resides.23Exit the BRAdmin application making sure that you save the changes that you have made. You are now ready to print.If you want to enable queue server capabilities on services other than the default NetWare® services, you must define new services that are enabled for NetWare® and for the desired port. Refer to the Appendix in this manual for information on how to do this.
NOVELL® NETWARE® PRINTING 6 - 12Creating the NetWare Print Server (NDS Remote Printer) Using Novell® NWAdmin and BRAdmin Professional UtilityTo configure a Brother print server for remote printer mode with NWADMIN (NetWare® Administrator utility) and BRAdmin, you will need to perform the following steps:1Make sure that the PSERVER NLM (NetWare® Loadable Module) is loaded on your file server and that you are logged in as ADMIN in NDS mode on the NetWare® 4.1x file server.2Start NWADMIN by double clicking on the icon. Select the desired Context that will contain the new printer.3Select Object from the menu bar and then Create. When you get the New Object menu, select Printer and then OK.4Enter the name of the printer and select Create.5Double click on the print server name of your PSERVER NLM. Click on Assignments and then Add.6If necessary, change the directory context. Select the printer you created and click OK. Note the number of the printer, as you will use this later, then click OK.7Select the desired Context that will contain the default print queue, and then click on Object and Create to get New Object menu. 8Select Print Queue and then OK. Make sure that Directory Service Queue is selected, and then type in a name for the default print queue.9Click on the button to select the print queue volume. Change the directory context if necessary, then select the desired volume (Objects) and click OK. Click Create to create the print queue.10Change context if required and then double click the name of the printer you created previously.11Click Assignments and then Add.
6 - 13 NOVELL® NETWARE® PRINTING12Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN.13Start the appropriate BRAdmin application, and select the correct print server you wish to configure (by default, the node names will begin with BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)). 14Double click the appropriate print server. You will be prompted for a password, the default password is access.15Now select the NetWare tab.16Select Remote Printer as the Operating Mode, select the name of your PSERVER NLM as the print server Name and select the number of the printer from step 6 as the Printer Number.17Click OK. And exit BRAdmin.You can find the NetWare® server name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.The same service assigned by NetWare® print server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare® service, you must define new services that are enabled for NetWare® and for the desired port.
NOVELL® NETWARE® PRINTING 6 - 14You must now unload the PSERVER NLM from your NetWare® file server console and then reload it in order for the changes to take effect.As an alternative to Brother's BRAdmin application or the Novell® NWADMIN application, you can use the standard Novell® PCONSOLE utility in conjunction with Brother's BRCONFIG program to set up your print queues. BRCONFIG program will be installed at the same time when you install the BRAdmin and you can find the BRCONFIG in the menu Start/Program/Brother BRAdmin utilities. Configuring the Brother Print Server (Queue Server Mode in Bindery Emulation Mode) Using PCONSOLE and BRCONFIG1Login as Supervisor (NetWare® 3.xx) or ADMIN (NetWare® 4.1x or later; be sure to specify the /b option for bindery mode).2Execute BRCONFIG from the Windows® menu. 3Select the corresponding server name from the list of print servers. 4When you get the message that the print server is connected, type the default password access in response to the # prompt (the password will not echo), and then press the ENTER key in response to the Enter Username> prompt. 5When you get the Local> prompt, type:6SET NETWARE SERVER servername ENABLE Where servername is the name of the file server on which the print queue will reside. If there is more than one file server that you wish to print from, repeat this command as many times as necessary. 7Type EXIT to exit the BRCONFIG remote console program and save the changes, then start the Novell® PCONSOLE utility.8If you have NetWare® 4.xx, change the mode to Bindery Mode by pressing the F4 key. Select print server Information (NetWare® 3.xx) or print servers (NetWare® 4.1x; ignore the warning message) from the Available Options menu.
6 - 15 NOVELL® NETWARE® PRINTING9You will be shown a list of current print servers. Press the INSERT key to create a new entry, type in the NetWare® print server name (BRN_xxxxxx_P1 by default, where xxxxxx is the last six digits of the Ethernet address) and press ENTER. Return to the main Available Options menu by pressing ESCAPE.10Select the Print Queue Information (NetWare® 3.xx) or Print Queues (NetWare® 4.1x) menu option to see list of configured print queues. 11Press INSERT to create a new queue on the file server, type the new queue name and press ENTER. The name does not have to be related to the name of the print server resources, but should be short and convenient for users to remember.12Make sure that the new queue name is highlighted, and then press ENTER to configure the queue. 13Select Queue Servers (in NetWare® 4.1x, this item is called print servers) and press ENTER to specify which network print servers can print jobs from this print queue. The list will be empty, since none have been selected yet if this is a new queue. 14Press INSERT to get a list of the queue server candidates and select the print server service name from step 9, Press ENTER.15Press ESCAPE several times until you return to the Available Options menu.Force the print server to rescan file servers for print jobs. You may either turn the printer off and on again or you may use the BRCONFIG or TELNET command SET NETWARE RESCAN to make the print server rescan for file servers.Configuring the Brother Print Server (Queue Server Mode in NDS Mode) Using PCONSOLE and BRCONFIG1Make sure that you are logged in as ADMIN in NDS mode on the NetWare® 4.1x file server.2Run the PCONSOLE utility from PC workstation.
NOVELL® NETWARE® PRINTING 6 - 163Select print servers from the Available Options menu.4Press INSERT and enter the print server name.Important:Do not assign a password to the print server or it will not log in.5Return to the main Available Options menu by pressing ESCAPE.6Select Print Queues.7Press INSERT type in the desired print queue name (you will also be asked for a volume name. Press INSERT and select the appropriate volume), and press ESCAPE to return to the main menu. 8Make sure that the new queue name is highlighted, and press ENTER.9Select print servers and press ENTER to specify which network print servers can print jobs from this print queue. The list will be empty, since none have been selected.10Press INSERT to get a list of the queue server candidates and select the NetWare® print server name from step 4, which will then be added to the list. Press ENTER. And then, press ESCAPE several times to return to the main Available Options menu.11Select Printers from the Available Options menu.Enter the NetWare® print service name of the print server exactly as it appeared in the Network Configuration Page (the default name is BRN_xxxxxx_P1, where xxxxxx is the last six digits of the Ethernet address (MAC address), unless you changed the name to something else). You can find the NetWare® print service name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.
6 - 17 NOVELL® NETWARE® PRINTING12Press INSERT and enter a descriptive name for the printer.13Make sure that the new printer name is highlighted, and then press ENTER. You will be shown the Printer Configuration Window.14Select Print Queues Assigned: (See List), and then press ENTER.The list of print queues will be empty, since none has been selected.15Press INSERT to get a list of the print queues and select the print queue name which you entered in Step 7. 16Press ESCAPE several times and go back to the Available Options menu.17Select print servers and select the name of the print server that you entered in Step 4.18Highlight the Printers option in the print server Information menu.19Press INSERT and select the name of the printer you entered in Step 12.20Press ESCAPE several times to return to DOS. 21Execute the BRCONFIG from the Windows® menu.Select the print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the default password of access in response to the # prompt (the password will not echo), and then press the ENTER key again in response to the ENTER Username> prompt. When you get the Local> prompt, type:SET SERVICE service TREE treeSET SERVICE service CONTEXT Context■Where tree is the NDS tree name.■Where context is the name of context where the print server resides.
NOVELL® NETWARE® PRINTING 6 - 18■Service is the name of the service assigned by NetWare® print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC address)).■You can also enter the TREE and CONTEXT name using your web browser, by connecting to the Brother print server using the TCP/IP protocol and selecting the NetWare protocol configuration.22Use the BRCONFIG command or TELNET command: SET NETWARE RESCAN to force the print server to rescan for file servers, or power cycle the printer.Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG1Make sure that the PSERVER NLM (NetWare® Loadable Module) is loaded on your file server.2Log into the file server from your PC workstation as ADMIN if you are using NetWare® 4.1x (if you want NDS support, do not login under bindery mode). If you are using NetWare® 2.xx or 3.xx, login as SUPERVISOR.3Run the PCONSOLE utility from your PC workstation.4If you are creating a new print queue, select Print Queue Information (NetWare® 3.xx) or Print Queues (NetWare® 4.1x) from the Available Options menu. The same service assigned by NetWare® print server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare® service, you must define new services that are enabled for NetWare® and for the desired port. Refer to Appendix in this manual for information on how to do this.
6 - 19 NOVELL® NETWARE® PRINTING5Press INSERT, type in the desired print queue name (with NetWare® 4.1x, you will also be asked for a volume name; press INSERT and select the appropriate volume), and press ESCAPE to return to the main menu.The following steps apply to configuring a remote printer with NDS support on NetWare® 4.1x systems:6aSelect print servers from the PCONSOLE menu and then select the print server name of the PSERVER NLM on your file server.bSelect Printers.cPress INSERT to get Object, Class menu.dPress INSERT and enter the Printer Name (any unique name is OK).eHighlight the printer name and press ENTER twice to get to the Printer Configuration Menu.fPCONSOLE will assign a Printer Number. Remember this number, since it will be used later.gHighlight Print Queues Assigned and press ENTER and then INSERT to get a list of available queues. hHighlight the name of the print queue you wish to assign to the remote printer and press ENTER.iThe other settings in the menu are not required. Click ESCAPE several times to exit PCONSOLE.jSkip to the Assigning the remote printer name and number sections below.
NOVELL® NETWARE® PRINTING 6 - 20The following steps apply to configuring a remote printer on NetWare® 3.xx systems: 6 aSelect print server Information from the PCONSOLE main menu and choose the name of the PSERVER NLM.bSelect print server configuration and then printer configuration. Select any Not Installed printer and press ENTER. Remember the number of this printer, since it will be used later in the configuration process.cIf desired, type in a new name for the printer.dGo to Type, press ENTER, highlight Remote Other/Unknown and press ENTER again. The other settings in this menu are not required.eClick ESCAPE and save the changes.fClick ESCAPE and select Queues Serviced by Printer.gHighlight the printer name that you just configured and press ENTER.hPress INSERT, choose the desired print queue, and press ENTER (you can accept the default priority).iPress ESCAPE several times to exit PCONSOLE.Assigning the Remote printer name and number using BRCONFIG 7 aExecute the BRCONFIG from the Windows® menu.
6 - 21 NOVELL® NETWARE® PRINTINGbSelect the Brother print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the default password access in response to the # prompt (the password will not echo) and then press the ENTER key again in response to the Enter Username> prompt. When you get the Local> prompt, type:SET NETWARE NPRINTER nlm number ON serviceSET NETWARE RESCANEXIT■Where nlm is the name of the PSERVER NLM on your file server.■Number is the printer number (this must match the printer number you selected during the PCONSOLE configuration in the previous steps).■Service is the name of the service assigned by NetWare® print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC address)).For example, to set up remote "Printer 3" for a Brother printer with the print server BRN_310107_P1 using the PSERVER NLM called BROTHER1PS, you would type:SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1SET NETWARE RESCANEXIT■You can also enter the remote printer name using your web browser, by connecting to the Brother print server using the TCP/IP protocol and selecting the NetWare® protocol configuration.The same services assigned by NetWare® print server name cannot be used for both queue server mode and remote printer mode.You must now unload the PSERVER NLM from your NetWare® file server console and then reload it in order for the changes to take effect.
NOVELL® NETWARE® PRINTING 6 - 22Other Sources of Information1Visit http://solutions.brother.com for more information on network printing.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.
7 - 1 PRINTING FROM A MACINTOSH®77Printing From a Macintosh®Printing From a Macintosh® Using AppleTalk® and TCP/IP or RendezvousTMOverviewBrother print servers support the AppleTalk® protocol running over Ethernet (also known as EtherTalk®). This allows Macintosh® users to print at the same time as all other Ethernet network using the AppleTalk® (also referred to as EtherTalk®) protocol. NC-7100w Brother wireless print server supports Mac OS® X 10.1 to 10.3. You can use the TCP/IP printing capability for any Mac OS® X version. This allows Macintosh® users to send print jobs using the TCP/IP protocol. With the release of OS® X 10.2, Apple® introduced support for RendezvousTM printing. RendezvousTM supports automatic network configuration. If you choose to use the RendezvousTM features of your Brother product, you usually do not need to configure any IP address settings yourself. For updated information on printing from a Macintosh® visit the Brother Solutions web site at: http://solutions.brother.com
PRINTING FROM A MACINTOSH® 7 - 2Quick Tips:1The default name that will appear in the Print Center of a Macintosh® will usually be BRN_xxxxxx_P1_AT (where xxxxxx is the last 6 digits of the Ethernet address)2From a Macintosh® network, the easiest way to change this name is to assign an IP address to the printer and then use a Web browser to change the name. Connect to the printer using a web browser and then click on Network Configuration. Enter the password (the default password is access) then select Configure AppleTalk. Click on BRN_xxxxxx_P1_AT, then on Service Name. Enter the new name that you wish to appear in Print Center. Then click on Submit.3The default password for Brother print servers is access.4See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.5The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer.
7 - 3 PRINTING FROM A MACINTOSH®Macintosh® Configuration (Mac OS® X 10.1 to 10.3)The appropriate PPD file supplied with your printer must be installed. Insert the CD-ROM into the CD-ROM drive of your computer. Double click the Start Here OS X icon. Select your language and follow the on-screen instructions for Install Software.How to Select the Print Server (AppleTalk®/EtherTalk®)After installing the PPD, use the following steps to select the printer driver: 1Turn the power of the printer ON.2From the Go menu, select Applications.3Open the Utilities folder.4Open the Print Center Icon.5Click the Add Printer button.6Select AppleTalk.7Select BRN_XXXXXX_P1_AT and click the Add button.
PRINTING FROM A MACINTOSH® 7 - 4For AppleTalk® connections, the printer's AppleTalk® service name is BRN_XXXXXX_P1_AT, where XXXXXX is the last six digits of the Ethernet address.Printing the Network Configuration Page will allow you to confirm the MAC address. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.How to Select the Print Server (TCP/IP)After installing the PPD, use the following steps to select the printer driver: 1Turn the power of the printer ON.2From the Go menu, select Applications.3Open the Utilities folder.4Open the Print Center Icon.5Click the Add Printer button.6Select LPR Printers using IP.7Enter the TCP/IP address of the printer into the LPR Printer's Address box.Printing the Network Configuration Page will allow you to confirm the TCP/IP address. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.8If you are not using the default Queue enter the Queue name you are using.9From the Printer Model pull-down list select your model.10Click Add and the printer will be available from the Printer List.
7 - 5 PRINTING FROM A MACINTOSH®Apple® RendezvousTM PrintingApple® RendezvousTM lets you create an instant network of computers and smart devices just by connecting them to each other.RendezvousTM support allows a RendezvousTM ready printer to automatically configure itself to work in a Mac OS® X RendezvousTM system. You do not need to manually configure any IP address or network settings within the printer as the printer will automatically configure itself.Please note that Brother recommends that you use Mac OS® X 10.2.4 or later version.Visit http://solutions.brother.com for the latest information on how to set up RendezvousTM printing for Mac OS® 10.2.How to Select the Printer Driver1From the Go menu, select Applications.2Open the Utilities folder.3Open the Print Center icon.4Click the Add Printer... button.5Select Rendezvous and any available RendezvousTM compatible machines will be displayed.6Select Brother from the Printer Model.7Select Model Name, and then click Add. The PPD files installed in your Macintosh® will be displayed. Select the relevant PPD file. The RendezvousTM ready printer will be displayed.8Click the printer, then click the Make Default to set the printer as the default printer. The printer is now ready to print.If you are using Mac OS® X 10.2.1, three printers will be listed. Select any one of these listed.
PRINTING FROM A MACINTOSH® 7 - 6Changing the ConfigurationFrom a Macintosh®, the easiest way to change the printer or print server parameters is to use a web browser.Simply connect to the printer using the format: http://ip_address where ip_address is the address of the printer.Other Sources of Information1Visit http://solutions.brother.com for more information on network printing.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.3Refer to chapter 8 for more information on web-based management.
8 - 1 WEB BASED MANAGEMENT88Web Based ManagementHow to use a Web Browser to Manage Your DeviceOverviewA standard Web Browser (we recommend Netscape Navigator version 4.0 or later/Microsoft Internet Explorer version 5.0 or later) can be used to manage your printer using the HTTP (Hyper Text Transfer Protocol). You can get the following information from a printer on your network using a web browser:1Printer status information.2Take control of the printer’s control panel.3Software version information of the printer and print server.4Change network and printer settings details.You must use the TCP/IP protocol on your network and have a valid IP address programmed into the print server and your computer. Quick Tips:1The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer.2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address on your printer.3The default password for Brother print servers is access.
WEB BASED MANAGEMENT 8 - 24You can use a web browser on most computing platforms, for example, Macintosh® and Unix users are also able to connect to the printer and manage it.5You can also use the BRAdmin application to manage the printer and its network configuration.How to Connect to Your Printer Using a BrowserType http://printer’s IP Address / into your browser (you can also use the NetBIOS name of the print server, if you are in a Microsoft® Windows® domain/Workgroup environment). Enter the DNS name of the printer if connecting to a network that uses the DNS protocol.Other Sources of Information1Visit http://solutions.brother.com for more information on network printing. 2Refer to chapter 9 of this User’s Guide to learn how to configure the IP address of the printer.
9 - 1 TCP/IP CONFIGURATION99TCP/IP ConfigurationAssigning TCP/IP InformationOverviewThe TCP/IP protocol requires that each device on the network have it's own unique IP address. Use the following information to learn about IP address configuration.The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169.254.1.0 to 169.254.254.255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. However, you can easily change this IP address number to match with the IP address details of your network. This can be done in any of the following ways:■From your printer’s control panel settings (if your printer has an LCD panel).■BRAdmin application (for Windows® 95/98/Me, Windows NT®4.0 and Windows® 2000/XP, using the IPX/SPX or TCP/IP protocols).■DHCP, APIPA, Reverse ARP (rarp) or BOOTP.■The ARP command.■Brother BRCONFIG NetWare® utility (a Novell® Network is necessary).■TELNET.■HTTP (Web browser).■Other SNMP based management utility.
TCP/IP CONFIGURATION 9 - 2These configuration methods are described in the following paragraphs.Using the Printer Control Panel to Allocate an IP Address (Printers with LCD Panels Only)Refer to the Quick Setup Guide for details on how to configure IP address information using the printer control panel. By using the control panel on the printer, you can program the IP address details at the same time that other printer parameters are configured.Changing the IP Address Using the BRAdmin ApplicationStart the BRAdmin application (from Windows® 95/98/Me, Windows NT®4.0 and Windows® 2000/XP).The BRAdmin application can use the IPX/SPX or TCP/IP protocols to communicate with the Brother print server.If you wish to use the TCP/IP protocol to manage the print server make sure that the print server has a valid IP address. There are two ways to change the IP address using the BRAdmin Professional utility:■Use the IPX/SPX protocol.■Use the TCP/IP protocol and let BRAdmin find the Brother print server as an unconfigured device.The IP address you assign to the print server must be on the same logical network as your host computers. If it is not, you must properly configure the subnet mask and the router (gateway).Please use BRAdmin Professional version 1.59 or later.
9 - 3 TCP/IP CONFIGURATIONUsing BRAdmin and the IPX/SPX Protocol to Set the IP AddressIf your PC is using the Novell® NetWare® Client software and is using the IPX/SPX protocol, do the following:1Select IPX/SPX filter in the left frame of the main window.2Check the print server name (the default node name is BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)).If you cannot find your server name, select the Device menu and choose Search Active Devices (you can also press the F4 key) and try again.3Select the print server that you wish to configure and double click it. You will be asked for a password. The default password is access.4Select the TCP/IP tab and set the IP address, Subnet mask and Gateway as needed. 5In the IP Config box, click the Static radio button. 6Click OK.Restart the print server by using BRAdmin, Web Browser or TELNET. If you are not sure how to restart the print server, you may simply turn the printer’s power switch off, and then switch it on.You can find the node name and MAC address by printing out the printer Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network configuration Page on your print server.
TCP/IP CONFIGURATION 9 - 4Using BRAdmin and the TCP/IP Protocol to Set the IP AddressIf your PC is using the TCP/IP protocol, do the following:1Select TCP/IP filter in the left frame of the main window.2Select the Device menu and choose the Search Active Devices.3Select the Device menu and choose Setup Unconfigured Device.4Select the MAC address of your print server and click the Configure button.You can find the node name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server.5Enter the IP address, Subnet mask and Gateway (if needed) of your print server.6Click OK then select Close.7With the correctly programmed IP address, you will see the Brother print server in the device list.If the print server is set to its factory default settings, it will not appear in the BRAdmin screen. However, selecting the Search Active Devices option will force the BRAdmin Professional utility to find the device as an unconfigured device.
9 - 5 TCP/IP CONFIGURATIONUsing DHCP to Configure the IP AddressThe Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have DHCP Server in your network (typically a Unix®/Linux, Windows NT®4.0, Windows® 2000 or Novell® NetWare® network) the print server will automatically obtains its IP address from DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.Using APIPA to Configure the IP AddressWith Automatic Private IP Addressing (APIPA), DHCP clients automatically configure an IP address and subnet mask when a DHCP server is not available. The device chooses it's own IP address in the range 169.254.1.0 through to 169.254.254.255. The subnet mask is automatically set to 255.255.0.0 and the gateway address is set to 0.0.0.0.By default, the APIPA protocol is enabled.If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the BOOT METHOD to static so that the print server has a static IP address. This will prevent the print server from trying to obtain an IP address from any of these systems. To change the BOOT METHOD, use the printer’s control panel (for those printers that have a LCD panel), TELNET (using the SET IP METHOD command), a Web browser or by using the BRAdmin application.
TCP/IP CONFIGURATION 9 - 6Using ARP to Configure the Print Server IP AddressIf you are unable to use the BRAdmin application or the printer’s control panel and your network does not use a DHCP server, you can also use the ARP command. The ARP command is available on Windows® systems that have TCP/IP installed as well as UNIX® systems. To use arp enter the following command at the command prompt:arp -s ipaddress ethernetaddressWhere ethernetaddress is the Ethernet address (MAC address) of the print server and ipaddress is the IP address of the print server. For example:Windows® SystemsWindows® systems require the hash "-" character between each digit of the Ethernet address.arp -s 192.189.207.2 00-80-77-31-01-07UNIX®/Linux SystemsTypically, UNIX® and Linux systems require the colon ":" character between each digit of the Ethernet address.arp -s 192.189.207.2 00:80:77:31:01:07
9 - 7 TCP/IP CONFIGURATIONTYou must be on the same Ethernet segment (that is, there cannot be a router between the print server and operating system) to use the arp -s command. If there is a router, you may use BOOTP or other methods described in this chapter to enter the IP address.If your Administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your Brother print server can receive an IP address from any one of these IP address allocation systems. In which case, you will not need to use the ARP command. The ARP command only works once. For security reasons, once you have successfully configured the IP address of a Brother print server using the ARP command, you cannot use the ARP command again to change the address. The print server will ignore any attempts to do this. If you wish to change the IP address again, use a Web Browser, TELNET (using the SET IP ADDRESS command) the printer’s control panel or factory reset the print server (which will then allow you to use the ARP command again).To configure the print server and to verify the connection, enter the following command ping ipaddress where  ipaddress is the IP address of the print server. For example, ping 192.189.207.2.
TCP/IP CONFIGURATION 9 - 8Using RARP to Configure the IP Address The Brother print server’s IP address can be configured using the Reverse ARP (rarp) facility on your host computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an entry similar to the following:00:80:77:31:01:07   BRN_310107Where the first entry is the Ethernet address of the print server and the second entry is the name of the print server (the name must be the same as the one you put in the /etc/hosts file).If the rarp daemon is not already running, start it (depending on the system the command can be rarpd, rarpd -a, in.rarpd -a or something else; type man rarpd or refer to your system documentation for additional information). To verify that the rarp daemon is running on a Berkeley UNIX®-based system, type the following command:ps -ax | grep -v grep | grep rarpdFor AT&T UNIX®-based systems, type:ps -ef | grep -v grep | grep rarpdThe Brother print server will get the IP address from the rarp daemon when the printer is powered on.
9 - 9 TCP/IP CONFIGURATIONUsing BOOTP to Configure the IP AddressBOOTP is an alternative to rarp that has the advantage of allowing configuration of the subnet mask and gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running on your host computer (it should appear in the /etc/services file on your host as a real service; type man bootpd or refer to your system documentation for information). BOOTP is usually started up via the /etc/inetd.conf file, so you may need to enable it by removing the "#" in front of the bootp entry in that file. For example, a typical bootp entry in the /etc/inetd.conf file would be:#bootp dgram udp wait /usr/etc/bootpd bootpd -iDepending on the system, this entry might be called "bootps" instead of "bootp".BRN_310107 1  00:80:77:31:01:07 192.189.207.3and:BRN_310107:ht=ethernet:ha=008077310107:\ip=192.189.207.3:In order to enable BOOTP, simply use an editor to delete the "#" (if there is no "#", then BOOTP is already enabled). Then edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network type (1 for Ethernet), Ethernet address and the IP address, subnet mask and gateway of the print server. Unfortunately, the exact format for doing this is not standardized, so you will need to refer to your system documentation to determine how to enter this information (many UNIX® systems also have template examples in the bootptab file that you can use for reference). Some examples of typical /etc/bootptab entries include:
TCP/IP CONFIGURATION 9 - 10Certain BOOTP host software implementations will not respond to BOOTP requests if you have not included a download filename in the configuration file; if this is the case, simply create a null file on the host and specify the name of this file and its path in the configuration file.As with rarp, the print server will load its IP address from the BOOTP server when the printer is powered on.Configuring the IP Address with BRCONFIGUsers of Novell® networks have additional alternatives for configuring the IP address of Brother print servers by using the remote console facility. On a NetWare® network, you can use the BRCONFIG utility which is included with every print server.Execute BRCONFIG from the Windows® menu. Select the corresponding server name from the list of print servers. When you get the message that the print server is connected, type the default password access in response to the “#” prompt.You will be prompted for a user name. Enter anything in response to this prompt.You will then get the Local> prompt. Type SET IP ADDRESS ipaddress, where ipaddress is the desired IP address you wish to assign to the print server (check with your network manager for the IP address to use). For example:Local> SET IP ADDRESS 192.189.207.3You will now need to set the subnet mask by typing SET IP SUBNET subnet mask, where subnet mask is the desired subnet mask you wish to assign to the print server (check with your network manager for the subnet mask to use). For example:Local> SET IP SUBNET 255.255.255.0
9 - 11 TCP/IP CONFIGURATIONIf you do not have any subnets, use one of the following default subnet masks:255.255.255.0  for class C networks255.255.0.0  for class B networks255.0.0.0  for class A networksThe leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 192 through 255 for Class C networks (e.g., 192.189.207.3), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for Class A networks (e.g., 13.27.7.1).If you have a gateway (router), enter its address with the command SET IP ROUTER routeraddress, where routeraddress is the desired IP address of the gateway you wish to assign to the print server. For example:Local> SET IP ROUTER 192.189.207.1Type SET IP METHOD STATIC to set the method of IP access configuration to static.To verify that you have entered the IP information correctly, type SHOW IP.Type EXIT or CTR-D (i.e., hold down the control key and type "D") to end the remote console session.Changing the IP Address Settings with the TELNET ConsoleYou can also use the TELNET command to change the IP address.Using TELNET is effective way, when you change the IP address. But a valid IP address must already be programmed into the print server.If you are using the TELNET, you will be expected to enter the password of the print server. Press RETURN and enter the default password of access in response to the "#" prompt (it will not echo).You will be prompted for a user name. Enter anything in response to this prompt.
TCP/IP CONFIGURATION 9 - 12You will then get the Local> prompt. Type SET IP ADDRESS ipaddress, where ipaddress is the desired IP address you wish to assign to the print server (check with your network manager for the IP address to use). For example:Local> SET IP ADDRESS 192.189.207.3You will now need to set the subnet mask by typing SET IP SUBNET subnet mask, where subnet mask is the desired subnet mask you wish to assign to the print server (check with your network manager for the subnet mask to use). For example:Local> SET IP SUBNET 255.255.255.0If you do not have any subnets, use one of the following default subnet masks:255.255.255.0  for class C networks255.255.0.0  for class B networks255.0.0.0  for class A networksThe leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 192 through 255 for Class C networks (e.g., 192.189.207.3), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for Class A networks (e.g., 13.27.7.1).If you have a gateway (router), enter its address with the command SET IP ROUTER routeraddress, where routeraddress is the desired IP address of the gateway you wish to assign to the print server. For example:Local> SET IP ROUTER 192.189.207.1Type SET IP METHOD STATIC to set the method of IP access configuration to static.To verify that you have entered the IP information correctly, type SHOW IP.Type EXIT or CTR-D (i.e., hold down the control key and type "D") to end the remote console session.
9 - 13 TCP/IP CONFIGURATIONOther Sources of InformationVisit http://solutions.brother.com for more information on TCP/IP protocol.
TROUBLESHOOTING 10 - 11010TroubleshootingOverviewThis chapter describes procedures for troubleshooting problems you may encounter with a Brother print server, it is divided into the following sections: 1Wireless Setup Problems2Network Initial Setup Problems3Intermittent Problems 4Protocol-Specific TroubleshootingWireless Setup ProblemsBefore you configure the NC-7100w print server, you need to temporarily change your computer’s wireless settings to communicate with the unconfigured print server.If you are unable to see NC-7100w network (SETUP) in the list when using Windows® XP or Mac OS® X 10.1 to 10.3, check the following:For more information, refer to the Quick Setup Guide that was supplied with this product.1Move your printer with the print server installed closer to your PC and try again.2Reset the print server back to its default factory setting and try again. See How to Print a Network Configuration Page on page A-8 for information how to reset to factory default setting.3Follow the steps below according to your operating system version, Windows® XP or Mac OS® X 10.1 to 10.3.If you are using Windows® 98/Me, Windows NT® 4.0 or Windows® 2000, please refer to your wireless card manufacture instructions for changing the wireless settings.
10 - 2 TROUBLESHOOTINGFor Windows® XP users1Click Start and then Control Panel.2Click the Network Connections icon.You may need to update Windows® XP and install the latest modules to show the screens shown in this section.
TROUBLESHOOTING 10 - 33Select and right click Wireless Network Connection. Click View Available Wireless Networks.4Click the Advanced button.5Click Add.
10 - 4 TROUBLESHOOTING6Enter SETUP. Select Disabled.Make sure that the check box at the bottom of the screen is selected, and then click OK.7Click OK.
TROUBLESHOOTING 10 - 58Check the wireless network connection status. It may take a few minutes for the IP address to be displayed.9You can now use the Brother Wireless Setup Wizard to configure your print server settings.
10 - 6 TROUBLESHOOTINGFor Mac OS® X 10.1 to 10.3 users1Click the AirPort status icon and select Open Internet Connect....2Select Create Network... from the Network option.3Enter SETUP, select 11 from the Channel option, and then click OK.
TROUBLESHOOTING 10 - 74Your wireless network is connected successfully.5You can now use the Brother Wireless Setup Wizard to configure your print server settings.Network Initial Setup ProblemsIf having configured the necessary wireless network settings and you are unable to print, check the following:1Make sure that the printer is powered on, is on-line and ready to print.Verify that the printer and the configuration are good by printing the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information how to print the Network Configuration Page on your print server. If the test fails, check:If you cannot print the Network Configuration Page or the network configuration is incorrect, try to restore the factory default settings of the print server by pressing the Network Test Button on the back of the printer for more than 5 seconds. Then, turn off the printer and then on again. You can check the settings by printing the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information how to print the Network Configuration Page on your print server.
10 - 8 TROUBLESHOOTING2If the configuration page prints but you cannot print documents, try the following.aCheck to see if there is any LED activity.The Brother wireless print server has two LEDs (as shown in Figure 10-1.)Figure 10-1If none of the following steps are successful, there is almost certainly a hardware or network problem!LEDs StatusPOWER LED TX/RX LED StatusAd-hoc mode Infrastructure modeOff Off The printer’s power switch is turned off.On Off N/A Not linked to Access PointBlinking synchronously Active Linked to Access PointTX/RX LEDPOWER LED
TROUBLESHOOTING 10 - 9bIf you are using TCP/IP:Try pinging the print server from the host operating system command prompt with the command:ping ipaddress Where ipaddress is the print server IP address (note that in some instances it can take up to two minutes for the print server to initialize.cIf you are using a Novell® system:Verify that the print server can be seen on the network. To do this, login as the SUPERVISOR (not as someone with supervisor privileges) or ADMIN (for NetWare® 4 or later servers), go into PCONSOLE or NWADMIN, select PRINT SERVER INFORMATION, and select the name of the print server (make sure that you have entered the print server name). If you can see Print Server Status and Control in the menu, then the Brother print server is visible to the network, proceed to the Novell® NetWare® Installation Troubleshooting Section.dIf you are running AppleTalk® for Macintosh®:Make sure that you can see the print server name in the Printer List when you select AppleTalk in the Print Center. If it is visible, then the connection is good, so proceed to AppleTalk® Troubleshooting on page 10-17. If you use the RendezvousTM function, please visit the Brother Solutions Center web site on: http://solutions.brother.com
10 - 10 TROUBLESHOOTINGIntermittent ProblemsIf the print server and printer start up OK, but you intermittently have problems printing, check the following:1If you can print small jobs but large graphics jobs are distorted or incomplete, make sure that you have adequate memory in your printer and the latest printer driver installed on your computer. The latest Brother printer drivers can be downloaded from http://solutions.brother.com2Check the individual protocol troubleshooting sections in this chapter for additional causes of intermittent printer problems.TCP/IP TroubleshootingIf you are using TCP/IP and cannot print to the print server and you have checked the hardware and network as described in the previous steps, then check the following:Turning off the printer and then again,Deleting and recreating the print server and creating a new print queue in order to eliminate the possibility of setup errors.1The problem may be the result of mismatched or duplicate IP address. Verify that the IP address is correctly loaded into the print server (via the configuration page. Make sure that no other nodes on the network have this address (DUPLICATE IP ADDRESS ARE THE BIGGEST CAUSE OF TCP/IP PRINTING PROBLEMS).2If you used BRCONFIG or NCP to enter the IP address, make sure that you exited the remote console properly with a CTRL-D or EXIT and that you turned the printer off and then again (it may take up to two minutes for the IP address to take effect).3Make sure that the TCP/IP protocol of the print server is enabled.It is always a good idea to try following in order to eliminate the possibility of setup errors.
TROUBLESHOOTING 10 - 114If you used rarp, make sure that you started the rarp daemon on any workstation using the rarpd, rarpd-a, or equivalent command. Verify that the /etc/ethers file contains the correct Ethernet address and that the print server name matches the name in the /etc/hosts file.5If you used bootp, make sure that you started the bootp daemon on any UNIX® workstation and bootp is enabled (i.e., the "#" is removed from the bootp entry) in the /etc/bootptab file is correctly configured.6Also verify that host computer and the print server are either on the same subnet, otherwise that the router is properly configured to pass data between the two devices.UNIX® Troubleshooting1Make sure that the /etc/printcap file (if applicable) is typed in correctly. In particular, look for missing ":" and "\" characters, because a small error anywhere in the file can have major consequences. Also check the /usr/spool directory to make sure that you have created a valid spool directory.2If you are using a Linux operating system, the X-Window Print tool program that is included with Linux may not properly configure the etc/printcap file for lpd operation, then you might also edit the etc/printcap file and change the following line in the entry for the printer.if:lp = /dev/null: \then to:lp = :\3If you are using a Berkeley-based UNIX®, make sure that the daemon is started on Berkeley based systems with the command lpc start printer, where printer is the name of the local print queue.4If you are using an AT&T-based UNIX®, make sure the printer is enabled (enable printer, where printer is the name of the local print queue).
10 - 12 TROUBLESHOOTING5Make sure that the lpr/lpd remote line printer service are running on the host computer (refer to your host computer documentation for information on how to do this).6If you are having trouble printing more than one job at a time, try increasing the IP timeout using the SET IP TIMEOUT command or using BRAdmin. 7If text or PCL jobs are run together, try setting the service (remote printer) with EOT set to string number 2 (<ESC>E). For example: SET SERVICE BRN_xxxxxx_P1 EOT 28If PostScript jobs fail to print or are run together, try setting the service (remote printer) with EOT set to string number 3 (control-D). For example: SET SERVICE BRN_xxxxxx_P1 EOT 39If the lines of a text file are staggered, make sure that you have specified a remote printer (rp) name of TEXT in your /etc/printcap file.10If you are using Sun Solaris V2.4 or earlier, there is a bug which causes long print jobs to fail when using a print server. If you are having trouble printing long jobs (over 1MB), add the line mx#0 to your etc/printcap file entry. 11If you cannot print from DEC TCP/IP Service for VMS (UCX), make sure that you have version 2.0B or later of this software, because earlier versions will not work with Brother print servers.Windows NT®4.0/LAN Server (TCP/IP) TroubleshootingIf you are having trouble printing with Windows NT®4.0 or LAN Server, check the following:1Make sure that TCP/IP and TCP/IP print service are installed and running on the Windows NT® system or the LAN Server file server.
TROUBLESHOOTING 10 - 132If you are using DHCP and you have not created a reservation for the print server, make sure that you enter the NetBIOS name of the print server in the Name or address of server providing lpd box.Windows® 95/98/Me Peer to Peer Print (LPR) TroubleshootingIf you are having trouble printing on a Windows® 95/98/Me Peer-to-Peer network (LPR method), check the following:1Make sure that the Brother LPR Port driver is correctly installed and configured according to the Windows® 95/98/Me Peer-to-Peer chapters.2Try to turn the Byte Count on in the Configure port area of printer driver properties.You may find that during the installation of BLP software, the screen that prompts you for a Port name is not displayed. This may happen on some Windows® 95/98/Me computers. Press the ALT and TAB keys to make it appear. Windows® 95/98/Me Peer-to-Peer (HP JetAdmin Compatible Method) TroubleshootingIf you are having trouble printing on a Windows® 95/98/Me Peer-to-Peer network, check the following (HP JetAdmin compatible method):1If the print server does not show up under JetAdmin on a Windows® 95/98/Me Peer-to-Peer network, try removing all of the Windows® 95/98/Me network software from the Network Control panel and then reinstalling them as follows:■First install the IPX/SPX-Compatible Protocol (or the TCP/IP protocol if you are using a later version of JetAdmin), the Client for Microsoft Networks, and the network adapter card driver.■Install the Latest HP JetAdmin software.■Restart the system, and then add the HP JetAdmin service.
10 - 14 TROUBLESHOOTINGWindows® 95/98/Me and Windows NT®4.0 Peer-to-Peer Print (NetBIOS) TroubleshootingIf you are having trouble printing on a Windows® 95/98/Me, Windows NT®4.0 or later Peer-to-Peer network (NetBIOS), check the following:1Make sure that the Brother NetBIOS Port driver is securely installed and configured according to the Windows® 95/98/Me or Windows NT®4.0 Peer-to-Peer (NetBIOS) chapters. You may find that during the installation of the port driver, the screen that prompts you for a Port name is not displayed. This happens on some Windows® 95/98/Me and Windows NT®4.0 computers. Press the ALT and TAB keys to make it appear.2Make sure that the print server is configured to be in the same workgroup or domain as the rest of your computers. It may take several minutes for the print server to appear in the network neighborhood. Brother Internet Print (TCP/IP) Troubleshooting1The first step in troubleshooting is to make sure that you have a valid E-mail connection on both the sending PC and the receiving print server. Try sending an E-mail message from the PC to a user at the remote site who can receive mail via the POP3 server. If this does not work, there may be an E-mail configuration problem on the PC, on the local E-mail server, or on the remote POP3 server. Double check to make sure that the E-mail parameters that you configured on the PC and on the remote print server match those that are configured on the E-mail servers.2If you can print small files OK but are having problems printing large files, the problem may be in the e-mail system! Some E-mail systems have difficulties printing large files. If the file does not reach its destination intact, then the problem is with the E-mail system.3You can also enable the partial e-mail print facility on your client PC, this will split the e-mail up into fragments which should then not overwhelm your e-mail server. To do this, select the property dialog of the Brother Internet Print Port.
TROUBLESHOOTING 10 - 15Windows® 95/98/Me/2000/XP IPP TroubleshootingWant to use a different Port number other than 631If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If this is the case, use a different port number (port 80), or configure your Firewall to allow Port 631 data through.To send a print job using IPP to a printer using Port 80 (the standard HTTP port) enter the following when configuring your Windows® 2000/XP system.http://ip_address/ippGet More Info option in Windows® 2000 not workingIf you are using a URL of:http://ip_address:631 or http://ip_address:631/ipp, the Get More Info option in Windows® 2000 will not function. If you wish to use the Get More Info option use the following URL:http://ip_address This will then force Windows® 2000/XP to use Port 80 to communicate with the Brother print server.Windows® 95/98/Me clients not able to get the driver from a Windows® 2000/XP system.You must be using version 4.0 or later of Internet Explorer and the Microsoft Internet Print Services software must be installed on your client computers.
10 - 16 TROUBLESHOOTINGNovell® NetWare® TroubleshootingIf you cannot print from NetWare® and you have checked the hardware and network as described in the previous steps, first verify that the Brother print server is attached to the server queue by going to PCONSOLE, selecting PRINT QUEUE INFORMATION, and then CURRENTLY ATTACHED SERVERS. If the print server does not appear in the list of attached servers, then check the following:■Turning off the printer and then on again to force to rescan the NetWare® queue.■Deleting and recreating the print server and creating a new print queue in order to eliminate the possibility of setup errors.1If you changed the login password, you must change the password in both the Brother print server (using the SET NETWARE PASSWORD command if you are using the BRConfig software) or by using a web browser or the BRAdmin application and in the file server (using the PCONSOLE Print Server Information Change Password command).2If you created the print queue using PCONSOLE and instead of BRAdmin, make sure that you have enabled at least one NetWare® file server using the SET NETWARE SERVER servername ENABLED command.3Have you exceeded your NetWare® user limit?4Make sure that the print server name you used in PCONSOLE exactly matches the name that is configured in the print server, and make sure it is defined as a Queue Server for the print queue.5If you are running both 802.3 and Ethernet II frames on different file servers on your network, there is a possibility that the print server may not make a connection to the desired file server. Try forcing the frame type to the desired one using the SET NETWARE FRAME command from the print server remote console or using BRAdmin.It is always a good idea to try followings in order to eliminate the possibility of setup errors.
TROUBLESHOOTING 10 - 176If you are using DOS CAPTURE statement and losing portions of your print job, try setting the TIMEOUT parameter in your CAPTURE statement to a higher value (at least 50 seconds for Windows®).AppleTalk® TroubleshootingIf you cannot print from an AppleTalk® for Macintosh® computer and you have checked the hardware and network as described in the previous steps, then check the following:1Make sure that the AppleTalk® protocol of your Macintosh® is enabled and you have selected the correct network interface from the AppleTalk®.2Make sure that the AppleTalk® protocol of the print server is enabled.3Make sure that you can see the print server name in the Printer List when you select AppleTalk in Print Center.Web Browser Troubleshooting (TCP/IP)1If you can not connect to the print server using your web browser it may be worth checking the Proxy Settings of your browser. Look in the Exceptions setting and if necessary, type in the IP address of the print server. This will stop your PC from trying to connect to your ISP or proxy server every time you wish to look at the printer server.2Make sure that you are using the proper Web Browser, we recommend Netscape Navigator version 4.0 or later/ Microsoft Internet Explorer version 4.0 or later.
A - 1 APPENDIXAAAppendix AGeneral InformationYou can change the configuration of your print server using any of the following methods.• Brother BRAdmin application for Windows® 95/98/Me, Windows NT®4.0 and Windows® 2000/XP• Brother Web BRAdmin application for IIS*• HTTP (using a web browser)• WebJetAdmin Software• TELNET (command utility)• Brother BRCONFIG NetWare® Utility (command utility)BRAdmin (Recommended)The Brother BRAdmin application can use the TCP/IP or IPX/SPX protocol. This utility allows you to graphically manage aspects of the network and printer. It can also be used to upgrade the firmware of the print server.Web BRAdminThe Web BRAdmin software is designed to manage all LAN/WAN Brother network connected devices. By installing the Web BRAdmin  software on a computer running IIS*, Administrators with a Web browser can connect to the Web BRAdmin server, which then communicates with the device itself. Unlike the BRAdmin Professional utility - which is designed for Windows® systems only - the Web BRAdmin software can be accessed from any client computer with a web browser that supports Java.Please note this software may not be included on the CD-ROM that was supplied with your Brother product. If it was not, please visit http://solutions.brother.com/webbradmin to learn more about this software and to download it.IIS* = Internet Information Server 4.0 or 5.0
APPENDIX A - 2HTTP (Recommended)Use your favorite web browser to connect to the Brother print server. This will allow you to configure printer and/or print server parameters.WebJetAdminBrother's print server range is HP WebJetAdmin compatible.TELNETTo connect to the print server using TELNET on UNIX®, Windows NT®4.0, or most other TCP/IP systems, type: TELNET ipaddress at the command prompt of the system prompt, where ipaddress is the IP address of the print server. When you are connected, click RETURN or ENTER to get the "#" prompt, enter the password access (the password will not appear on the screen), and type anything in response to the Enter Username> prompt. When you see the Local> prompt, you are ready to enter commands.Enter HELP at the command prompt for a list of supported commands. BRCONFIGThe Brother BRCONFIG utility runs from the DOS system prompt and is installed with BRAdmin. To connect the print server using the Brother BRCONFIG NetWare® utility, choose the BRCONFIG utility from the Brother BRAdmin utilities menu. If you have only one print server, you will be immediately connected to that server. If you have more than one print server, you will be given a list of available print servers. Type the number of the print server to which you wish to connect. When you are connected, enter the password access (the password will not appear on the screen) at the "#" prompt, and type anything in response to the Enter Username> prompt. When you get the Local> prompt, you are ready to enter commands. To use BRCONFIG, a Novell® Server (running the IPX protocol) is necessary and an active connection must be made to the server.Enter HELP at the command prompt for a list of supported commands.
A - 3 APPENDIXUsing ServicesGeneralA service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of available services): Enter HELP at the command prompt for a list of supported commands.Where xxxxxx is the last six digits of the Ethernet address (for example, BRN_310107_P1).Service (Example) DefinitionBINARY_P1 TCP/IP binary, NetBIOS service.TEXT_P1 TCP/IP text service (adds carriage return after each line feed).POSTSCRIPT_P1 PostScript service (switches PJL-compatible printer to PostScript mode).PCL_P1 PCL service (switches PJL-compatible printer to PCL mode).BRN_xxxxxx_P1_AT AppleTalk® and LPD service for Mac OS® 8.6 or later.BRN_xxxxxx_P1 NetWare® service (TCP/IP is enabled for backwards compatibility).
APPENDIX A - 4Reloading the Print Server FirmwareGeneralThe firmware on the print server is stored in flash memory. This means that you can upgrade the firmware by downloading the appropriate update file. To get the latest firmware update, visit the Brother Solutions web site at http://solutions.brother.com/Because of this, we STRONGLY recommend that you make a note of the current print server configuration before you upgrade. To do this, print out a configuration page (see How to Print a Network Configuration Page on page A-8 for information on how to print a configuration page).There are three methods of upgrading the firmware in your Brother print server:1Use the BRAdmin application (Recommended)2Use the FTP protocol (Recommended if running on Macintosh® or UNIX® network)3Use another system (such as a Novell® or UNIX® system to send the new firmware file to the print server).Some software versions that we provide will automatically factory reset your print server parameters. We try to avoid doing this. However, if we add a significant new feature to our print server, it can result in the print server being factory reset.
A - 5 APPENDIXReloading Firmware Using BRAdminThe BRAdmin application can be used to easily re-program your Brother print server.1Start BRAdmin.2Highlight the appropriate print server. Then select the Control menu and choose Load Firmware. You can select more than one print server by pressing CTRL+<select> or SHIFT+<select> on each additional print server.There are three possible ways of sending the new software version to the print server. For whichever method you select, you must enter a password for the print server. The default password for the print server is access.3TFTP PUT from this hostUse this method if you have TCP/IP already installed on your PC. BRAdmin will use the TFTP protocol to send the new firmware data to the print server.4TFTP GET from a serverIf you have a TFTP server installed in your network (many UNIX® systems provide TFTP support), you may wish to use this option. The new firmware file must be located in the TFTP BOOT directory on your TFTP server. In this case, your PC makes the print server read the firmware data from the assigned TFTP server. If you do not provide the correct file name, then the upgrade will fail. You must also ensure that the firmware file is set so that the print server can read the file. On UNIX® systems you can use the chmod command to specify file attributes. For example, chmod filename 666 allows the filename to be accessed by anyone. Also make sure that the TFTP service is running on your UNIX® server.5NetWare® GET from a serverYou must have a NetWare® server on your network (running IPX/SPX) and you must store the new firmware file in the SYS/Login directory of the server. In this case, your PC makes the print server read the firmware data from the assigned NetWare® server, the print server attaches to the NetWare® server and reads the firmware itself.
APPENDIX A - 6Reloading Using the FTP Protocol from a Command PromptBy specifying the print server PASSWORD AS THE USERNAME when logging on, it becomes possible to upgrade the firmware of the print server or printer (if supported). The following example assumes that the print server password is "cambridge"D:\>ftpftp> open 220.0.250.200Connected to 220.0.250.200.220 FTP print service:V-1.05/Use the network password for the ID if updating.User (220.0.250.200:(none)): cambridge230 User cambridge logged in.ftp> bin200 Ready command OK.ftp> hashHash mark printing on  ftp: (2048 bytes/hash mark) .ftp> send brnt261.blf200 Ready command OK.150 Transfer Start#######################################################################################################################################################################################################################################226 Data Transfer OK/Entering FirmWareUpdate mode.ftp: 1498053 bytes sent in 8.52Seconds 175.77Kbytes/sec.ftp> close226 Data Transfer OK.ftp> quitIf you encounter problems upgrading the firmware and you find that the network portion of the printer no longer functions, you should try re-programming the print server by using the COPY command from the DOS prompt of your PC. To do this, connect a parallel cable between your PC and printer and use the command COPY filename LPT1:/B (where filename is the new firmware file).
A - 7 APPENDIXWhen you see "226 Data Transfer OK/Entering FirmWareUpdate mode", you can be sure that the firmware file is being transferred to the print server. If you do not see this message, the file you are sending to the printer will either be ignored or the printer will print garbage.Reloading Using the FTP Protocol from a Web BrowserPlease visit the Brother Solutions Web site at http://solutions.brother.com for more information on upgrading the print server using a web browser.You must use the "bin" command to put the FTP client into Binary communications mode. If you do not specify the bin command the upgrade process will not function correctly.
APPENDIX A - 8Other InformationHow to Print a Network Configuration PageTo print the Network Configuration Page, use a fine ball point pen to hold down the Network Test Button of the printer for less than 5 seconds.Figure A-1How to Reset to Factory Default SettingIf you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), use a fine ball point pen to hold down the Network Test Button for more than 5 seconds.Figure A-2
B - 1 APPENDIXBBAppendix BWireless NetworkIntroductionThe Brother NC-7100w wireless print server supports the IEEE 802.11b and 802.11g wireless networking standards and can work in Infrastructure or Ad-hoc mode using common Wireless Authentication and security methods.Depending on the placement of the Brother NC-7100w wireless print server, distances of up to 90 meters can be reached. However, distance and overall quality can vary depending on the environment itself and the types of device used within that environment.Wireless LAN terms and conceptsThere are two types of Wireless networks: Infrastructure mode and Ad-hoc
APPENDIX B - 2Infrastructure ModeInfrastructure mode networks have a central access point at the heart of the network. The access point can also act as a bridge or a gateway to a wired network. When the Brother wireless device is set in this mode, it receives all print jobs via an access point.Figure B-1Ad-hoc ModeAd-hoc networks (also sometimes referred to as peer-to-peer networks) do not have a central Access point. Each Wireless client communicates directly with each other. When the Brother wireless device is set in this mode, it receives all print jobs directly from the computer sending the print data.Figure B-2
B - 3 APPENDIXAuthentication and EncryptionMost Wireless networks use some kind of security settings. These security settings define the authentication (how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the network). If you do not correctly specify these options when you are configuring your Brother wireless device, it will not be able to connect to the Wireless network. Therefore care must be taken when configuring these options. Please refer to the information below to see which authentication and encryption methods your Brother wireless device supports. For more information on Wireless communication visit, http://solutions.brother.com/wirelessAuthentication MethodsThe Brother Wireless Print Server supports the following methods:■Open SystemWireless devices are allowed access to the network without any authentication.■Shared Key (Infrastructure mode only)A secret pre-determined key is shared by all devices that will access the wireless network.Encryption MethodsEncryption is used to secure the data itself. The NC-7100w supports WEP encryption.■NoneNo encryption method is used.■WEPBy using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
APPENDIX B - 4Network KeyThere are some rules for each security method:■Open System/Shared Key with WEPEnter the WEP key that will be used to access your network. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format.64 (40) bit ASCII: Uses 5 text characters.e.g. "Hello" (this is case sensitive).64 (40) bit Hexadecimal:Uses 10 digits of hexadecimal data.e.g. "71f2234aba"128 (104) bit ASCII:  Uses 13 text characters.e.g. "Wirelesscomms"(this is case sensitive).128 (104) bit Hexadecimal:Uses 26 digits of hexadecimal data e.g. "71f2234ab56cd709e5412aa3ba"ChannelsWireless Ethernet networks use Channels. There are up to 13 channels that can be used. However, in many countries the number of channels available are restricted.
B - 5 APPENDIXConfiguring the Brother Wireless Print ServerYou can configure and change the wireless print server settings using the Brother Wireless Setup Wizard (recommended), the BRAdmin Professional utility, printer control panel buttons, a web browser or by using TELNET.Using the Control Panel Menus to Configure the Wireless Print ServerYou can access the NETWORK menu by following steps below to configure the wireless print server. See the printer User’s Guide for more information on the control panel menus and control panel buttons.Press any of the Menu buttons (+, -, Set or Back) to take the printer offline.Press the + button or the - button to move forward or backward through the menus until NETWORK is displayed.Press the Set button to move to the next menu level.READYINFORMATIONNETWORK
APPENDIX B - 6NETWORK menuTable B-1 shows the list of the NETWORK menu.In order to make your wireless settings effective, you must select the ASSOCIATE option from the WIRELESS menu and then select YES or YES AND REPORT. If you do not do this, the network settings will not be used unless you switch the printer off and then on again.Table B-I NETWORK menuDisplay Shows DescriptionTCP/IP Subsetting DescriptionTCP/IP ENABLE =ON/OFFIP ADDRESS= =0.0.0.0 ..... 255.255.255.255SUBNET MASK= =0.0.0.0 ..... 255.255.255.255GATEWAY= =0.0.0.0 ..... 255.255.255.255IP BOOT TRIES =0 ..... 3267IP METHOD =AUTO, STATIC, RARP, BOOTP, DHCPAPIPA =ON/OFFNETWARE NETWARE ENABLE =ON/OFFNETWARE  FRAME =AUTO, 8023, ENET, 8022, SNAPAPPLETALK =ON/OFFNETBIOS/IP =ON/OFF
B - 7 APPENDIXWIRELESS COMM.MODE =INFRASTRUCTURE, AD-HOCLIST SSID Shows a list of available names for the wireless networkSSID Shows SSID (uses a maximum of 32 digits and characteres 0-9, a-z and A-Z in ASCII values)CHANNEL =1.....13AUTHENTICATION =OPEN SYSTEM, SHARED KEYENCRYPTION =NONE, WEPWEP KEY SELECT =KEY1, KEY2, KEY3, KEY4WEP  KEY1  SIZE =40 (64) BITS, 104 (128) BITSWEP KEY1 TYPE =ASCII, HEXWEP KEY1 Shows the WEP key (uses a maximum of 5 or 13 digits and characters 0-9, a-z and A-Z in ASCII values, or uses a maximum of 10 or 26 digits and characters 0-9 and A-F in HEX values)WEP KEY2 SIZE...WEP KEY4ASSOCIATE =YES, YES&REPORTYES&REPORT prints the Network Configuration Page.Table B-I NETWORK menu (Continued)Display Shows Description
APPENDIX B - 8List of factory settingsTable B-II shows the factory settings.■Network factory default settingIf you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), hold down the network test button on the NC-7100w print server for more than 5 seconds.Table B-II List of factory settingsSubmenu Factory settingTCP/IP Subsetting Factory settingTCP/IP ENABLE =ONIP ADDRESS =###.###.###.### *1SUBNET MASK =0.0.0.0 *1GATEWAY =0.0.0.0IP BOOT TRIES =3IP METHOD =AUTOAPIPA =ONNETWARE NETWARE ENABLE =ONNET FRAME =AUTOAPPLETALK =ONNETBIOS/IP =ON
B - 9 APPENDIX*1 Automatic Private IP Addressing (APIPA) protocol automatically configures an IP address and subnet mask. For more details, see Chapter 9 of this guide.WIRELESS COMM.MODE =AD-HOCLIST SSID XXXSSID SETUPCHANNEL =11AUTHENTICATION =OPEN SYSTEMENCRYPTION =NONEWEP KEY SELECT =KEY1WEP KEY1 SIZEWEP KEY2 SIZEWEP KEY3 SIZEWEP KEY4 SIZE=64(40)BITSWEP KEY1 TYPEWEP KEY2 TYPEWEP KEY3 TYPEWEP KEY4 TYPE=ASCIIWEP KEY1WEP KEY2WEP KEY3WEP KEY4XXXASSOCIATE =YESTable B-II List of factory settings (Continued)Submenu Factory setting
APPENDIX B - 10Using the BRAdmin Professional Utility to Configure the Wireless Print Server (for Windows® users)The steps required to configure the wireless print server using the BRAdmin Professional utility is as follows:1Start BRAdmin Professional.2Select the node name of the Brother NC-7100w wireless print server from the list.3From the Control menu, select Configure Wireless Print Server.4You will be prompted for a password; the default password is access.
B - 11 APPENDIXWireless settings list for the BRAdmin Professional utilityTable B-III shows the wireless settings and status which you can configure and confirm using the BRAdmin Professional utility.Table B-III Wireless settings and statusItem Setting optionsCommunication Mode Infrastructure, Ad-hoc 802.11 (802.11b only)Wireless Network Name (SSID) 0 to 32 bytesChannel 1-13 (for Ad-hoc mode)(The number of channels varies by country.)Authentication Method Open System, Shared Key, WPA-PSKEncryption Mode NONE, WEP, TKIPWEP Key Shows the WEP key (uses a maximum of 5 or 13 digits and characters 0-9, a-z and A-Z in ASCII values, or uses a maximum of 10 or 26 digits and characters 0-9 and A-F in HEX values)Item Current statusOperating Mode 802.11b, 802.11gOperating Rate 1, 2, 5.5, 11 Mbps (for 802.11b), 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps (for 802.11g)Receiving Level 1 to 5
APPENDIX B - 12Using a Web Browser to Configure the Wireless Print Server (for Windows® users)The steps required to configure the wireless print server using a web browser is as follows:1Connect to the print server IP address using your web browser. For example; http://10.148.xxx.xx.2Click Network Configuration. You will be prompted for a password. The default user name and password is “admin” and “access”.3Click Configuration Wireless.For the wireless settings list when using a web browser, see Wireless settings and status on page B-11.NC-7100w Print Server SpecificationsModel name NC-7100wNetwork types IEEE802.11b/g wirelessFrequency 2400-2483.5 MHzRF channels US and Canada 1-11Europe 1-13Australia 1-13Communication mode Infrastructure, Ad-hoc 802.11 (802.11b only)Data rates 802.11b 11/5.5/2/1 Mbps802.11g 54/48/36/24/18/12/9/6 MbpsLink distance 90 m (295 ft.) at lowest data rate(The distance rate will vary upon miscellaneous items.)Network security SSID, 128 (104) / 64 (49) bit WEPInterface AIOLED 2 LEDs (POWER, TX/RX)Button 1 Network Test Button
B - 13 APPENDIXProtocols TCP/IP APR, RARP, BOOTP, DHCP, APIPA (Auto IP), WINS/NetBIOS, DNS, LPR/LPD, Raw Port/Port9100, POP3/SMTP, SMB Print, IPP, FTP, Rendezvous, SSDP, TELNET, SNMP, HTTP, TFTPNetware® IPX/SPXAppleTalk®Dimensions (W x D x H) 87 x 127 x 31.6 mm (3.4 x 5 x 1.2 in.)Weights 0.11 Kg (2.4 lb)Model name NC-7100w
INDEX I - 1IIndexAAd-hoc mode ............. B-1, B-2AIX ..................................... 1-3AIX 4.0 ............................... 1-8APIPA ......................... 1-1, 9-5AppleTalk ..............7-1, 7-3, 10-9, 10-17ARP .....................1-2, 9-1, 9-6Authentication ....................B-3Authentication methods .....B-3BBerkeley UNIX ................... 1-1BINARY_P1 .........1-2, 1-3, A-3BINDERY ........................... 6-2BIP ..................................... 5-1BOOTP ....................... 1-2, 9-9BRAdmin ........................... 9-2Brother LPR port ................ 3-4Brother NetBIOS Port Monitor 4-2, 4-4Brother Peer to Peer Print .3-4Brother Wireless Setup Wizard .........................................B-5Browser ............................. 8-2CCFGTCP .......................... 1-11Channel .............................B-4Control panel menu ...........B-5DDHCP ..................1-2, 9-1, 9-5DNS ................................... 8-2domain ..2-5, 3-3, 4-1, 4-2, 4-3, 8-2, 10-14DOS ................................... 4-1EE-mail ................................ 5-2emailpassword ................... 5-6Encryption ..........................B-3Encryption methods ...........B-3EtherTalk .................... 7-1, 7-3FFactory settings .................B-8flash memory .....................A-4FTP ............ 1-2, 1-11, A-4, A-6Hhosts .................................. 3-4HP distributed print service 1-7HP JetDirect ...................... 3-2HP-UX ............................... 1-3HP/UX ................................ 1-7HTTP ...................8-1, 9-1, A-1Hyper Text Transfer Protocol ..8-1IIBM LAN Server ................. 2-1IBM RS/6000 AIX .............. 1-8IEEE 802.11b ....................B-1IEEE 802.11g ....................B-1IIS ........................2-2, 3-2, A-1INFORMATION menu .......B-6Infrastructure mode ... B-1, B-2Internet .............................. 5-1Internet Printing ................. 5-1IPP ...........................................2-1, ..2-4, 3-2, 5-1, 5-9, 10-15IPX ..................................... 6-2IPX/SPX ............................. 9-1ISP ..................................... 5-2
I - 2 INDEXJJetAdmin ........................ 10-13JetDirect ............................ 3-2LLAN Server ................. 2-7, 4-8LCD menu .........................B-6LED .................................. 10-8LED status ....................... 10-8Linux ........................... 1-1, 1-6lpc ............................. 1-5, 1-14lpstat .................................. 1-5MMacintosh .......................... 7-2mailboxname ..................... 5-6Microsoft Internet Explorer 2-2Microsoft Internet Print Services.................................. 2-2, 3-2Microsoft TCP/IP printing ... 2-1MIME ................................. 5-2NNDPS .......................... 6-2, 6-3NDS ................................... 6-2NET USE ........................... 4-9NetBIOS ..........4-1, 4-8, 10-14NetWare 3 .................. 6-2, 6-6NetWare 4 .................. 6-2, 6-6NetWare 5 ......................... 6-2Netware GET .....................A-5Network key .......................B-4network neighborhood ....... 4-1Novell ............................... 10-9Novell Distributed Print Servic-es .................................... 6-3Novell NetWare ............. 10-16NWADMIN ......................... 6-2OOpen system .....................B-3OS/2 .................................. 2-7OS/2 Warp ......................... 4-8OS/2 Warp Server ...... 2-1, 2-7OS/400 ............................ 1-11Ppassword 1-1, 2-1, 3-1, 4-1, 5-1PCONSOLE ....................... 6-6Peer to Peer Printing ......... 3-1Peer-to-Peer ....... 10-13, 10-14ping .................................. 10-9POP3 .......................... 5-3, 5-6PPD ................................... 7-3PRINTCAP ........................ 1-2printcap .............................. 1-4Printer Agent ...................... 6-5PSERVER NLM ............... 6-12RRARP ................................. 9-8reloading firmware .............A-5Rendezvous printing .......... 7-5RFC 1001 and 1002 .......... 9-5rlpstat ................................. 1-5Ssam .................................... 1-7SCO UNIX configuration .. 1-10SCOADMIN ..................... 1-10server message block ........ 4-1service ............................... 1-3SETUP menu .....................B-6Shared key ........................B-3simple mail transport protocol ..5-2smaller networks ................ 3-1SMB ............................ 4-1, 4-8smit .................................... 1-8
INDEX I - 3SMTP .......................... 5-2, 5-7Specifications ..................B-12Sun Solaris 2.x .................. 1-9sysadmsh ........................ 1-11TTCP/IP .................1-1, 9-1, B-6TCP/IP printing .................. 2-1TELNET .....4-3, 5-5, 9-1, 9-11, A-1, A-2TEXT_P1 .............1-2, 1-3, A-3TFTP GET .........................A-5TFTP PUT .........................A-5TGV Multinet ...................... 1-5UUNIX .................................. 1-1WWeb BRAdmin ...................A-1web browser ...................... 9-1WebJetAdmin ....................A-1WEP ..................................B-3Windows 2000 ....2-1, 3-2, 4-1, 5-1, 6-4, 9-1, 10-15Windows 2000 printing 2-2, 2-4Windows 95/98/Me .... 2-2, 3-1, 4-1, 5-1, 6-4, 9-1, 10-13Windows NT 4.0 .2-1, 4-1, 5-1, 5-2, 6-4, 9-1Windows NT 4.0 printing ... 2-4Windows XP .........2-1, 4-1, 5-1, 9-1, 10-15Wired Equivalent Privacy ...B-3Wireless network ...............B-1workgroup .......................... 4-2

Navigation menu