Bryton orporation DA1702 Bryton Smart Heart rate sensor User Manual QSG HR

Download:
Mirror Download [FCC.gov]
Document ID	3403849
Application ID	E7Pax8Wu2j0GepXrrp/+eQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	101.67kB (1270891 bits)
Date Submitted	2017-05-26 00:00:00
Date Available	2017-05-26 00:00:00
Creation Date	2017-04-14 16:02:20
Producing Software	Adobe PDF library 9.90
Document Lastmod	2017-05-24 15:50:03
Document Title	QSG_HR
Document Creator	Adobe Illustrator CS5.1

Bryton Smart HR Sensor
Strap
Electrodes
The Bryton Smart HR Sensor contains a
user-replaceable CR2032 battery.
CR2032
Rider one
Rider 10
Rider 100
Rider 200/210
Rider 330
Rider 520
Rider 530
Amis S430
Amis S630
O ENP
Rider 310
Do Not Bleach
Do Not Iron
Do Not Dry Clean
Do Not Tumble Dry
40
To prolong the life of your heart rate
monitor, detach the sensor and clean
the strap after every use.
Accuracy may be degraded by poor
sensor contact, electrical interference,
and receiver distance from transmitter.
Made in China
IMPORTANT: Please Read This Notice before Using This Product
Weight
Physical size
3m
Incidental exposure to water of up to 1 meter for up to 30 minutes
14 .5g (sensor) / 31.5g (strap)
63 x 34.3 x 15 mm
Up to 2 years
Water Resistance
0 oC ~ 50 oC
Transmission range
Battery life
Limited Warranty
Bryton Inc. warrants its products to be free from defects in
materials or workmanship for one year from the date of purchase.
Bryton Inc. will repair or replace any component that fails in normal
use within this limited warranty period at no charge to the
customer for parts or labor.
This warranty does not apply to,
1) Damage caused by misuse, accident, abuse, fire, or other
external causes or acts of nature
2) Physical damage to the surface, such as scratches and dents;
3) Consumable parts, such as batteries, heart rate belt, unless
product damage has occurred due to a defect in materials or
workmanship
4) Damage caused by anyone who is not an authorized service
provider of Bryton Inc.
2.4GHZ/Bluetooth 4.0 and ANT+
低功率電波輻射電機管理宣告
本產品僅遵循中華民國國家通訊傳播委員會所頒佈低功率電波輻射性
電機管理辦法規範，並經驗證通過合格，請使用者遵循相關電信法規
以避免違反規定受罰。若使用者欲攜帶本機至其它國家應用，也請遵
循該地區或國家之相關法令限制。根據交通部低功率電波輻射性電機
管理辦法規定：
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者
均不得擅自變更頻率，加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有
干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前功合
法通信，依電信法規定作業之無線電通信。低功率射頻電機須忍受合
法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Operating temperature
est autorisée aux deux conditions suivantes: (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement."
CAN ICES-3(B)/NMB-3(B)
This Category II radiocommunication device complies with
Industry Canada Standard RSS-310. Ce dispositif de
radiocommunication de catégorie II respecte la norme CNR-310
d’Industrie Canada.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between
the radiator & your body. This device and its antenna(s) must not
be co-located or operating in conjunction with any other antenna
or transmitter.
CE Marking Warning
This is a Class B product, in a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
Australian Consumer Law
Our goods come with guarantees that can not be excluded under
the New Zealand and Australian Consumer Laws. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Radio frequency / Protocol
Bryton products and accessories are not medical devices and its
readings are for reference only. Bryton is not responsibile for the
consequences of any erroneous readings. Always consult your
physician before beginning any training program or using a heart
rate monitor. Please do not operate the product during any
activities, because lack of proper attention may cause injury, death
or material damage. When using or installing this product, please
comply with all applicable local laws and regulation. We and our
manufactuers and licensors shall not assume any responsibility for
damages arising from using this product during activities, misuse,
improper installation, act of God,any violation of traffic or safety
regulations, or software or map data product therein. This product
is not guaranteed to be free of errors or deficiencies, and is not
guaranteed to be applicable for any defined purpose.
FCC Regulations:
§ 15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
§ 15.21
Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment.
§ 15.105 (b)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
FCC RF Exposure Compliance
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission for an uncontrolled
environment.
Industry Canada Compliance
IC Regulations:
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:04:14 16:02:20+09:00
Creator                         : Adobe Illustrator CS5.1
Modify Date                     : 2017:05:24 15:50:03+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : QSG_HR
Creator Tool                    : Adobe Illustrator CS5.1
Metadata Date                   : 2017:05:24 15:50:03+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 124
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 15684 bytes, use -b option to extract)
Original Document ID            : uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7
Document ID                     : xmp.did:8BBE1DC6DC20E711A3C5FBFEF3BA584B
Instance ID                     : uuid:3460284e-153e-4b99-bf8f-a7bc5d5c83df
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:c09cb1e1-4b28-e543-8504-cb12314e99ce
Derived From Document ID        : xmp.did:F87F11740720681188C6A09AFF2A837E
Derived From Original Document ID: uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7
Derived From Rendition Class    : proof:pdf
History Action                  : saved
History Instance ID             : xmp.iid:8BBE1DC6DC20E711A3C5FBFEF3BA584B
History When                    : 2017:04:14 16:02:17+08:00
History Software Agent          : Adobe Illustrator CS5.1
History Changed                 : /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : D:\000-package\Accessory_2017\files\HRbelt_S.png
Startup Profile                 : Basic RGB
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 122.000477
Max Page Size H                 : 122.000133
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, Calibri-Bold, MyriadPro-Bold, MyriadPro-Semibold, MyriadPro-Regular, Myriad-BoldItalic, Myriad-Bold, Myriad-Roman, DFYuan-Lt, DFYuan-Bd-HKP-BF, MicrosoftJhengHeiUIBold
Font Family                     : Arial, Calibri, Myriad Pro, Myriad Pro, Myriad Pro, Myriad, Myriad, Myriad, 華康細圓體, 華康粗圓體(P), Microsoft JhengHei UI
Font Face                       : Bold, Bold, Bold, Semibold, Regular, Bold Italic, Bold, Roman, Regular, Regular, Bold
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Type 1, Type 1, Type 1, TrueType, TrueType, TrueType
Font Version                    : Version 6.80, Version 5.72, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, 001.001, 001.001, 001.001, Version 2.10, Version 2.10, Version 6.10
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : arialbd.ttf, calibrib.ttf, MyriadP2.otf, MyriadPro-Semibold_0.otf, MyriadP0.otf, wmbi____.pfb; wmbi____.pfm, wmb_____.pfb; wmb_____.pfm, wmr_____.pfb; wmr_____.pfm, 細圓體.ttc, 粗圓體.ttc,
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 360 C, PANTONE Cool Gray 10 C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 2.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 60.000002
Swatch Groups Group Name        : 灰階
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: R=242 G=242 B=242
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Red     : 242
Swatch Groups Colorants Green   : 242
Swatch Groups Colorants Blue    : 242
Producer                        : Adobe PDF library 9.90
Page Count                      : 2
For                             : Minny,
Bounding Box                    : 68 -468 774 -127
Container Version               : 11
Creator Version                 : 15

EXIF Metadata provided by EXIF.tools