Bryton orporation RIDER30 GPS enabled cycling computer User Manual

Bryton Incorporation GPS enabled cycling computer Rider 30 Series QG P1 eps

a href="https://usermanual.wiki/Bryton-orporation" itemprop="url"> Bryton orporation >

Contents

User Manual 1 of 2

ENFRDE2146753Mount the Rider 30 to the BikeFRDE12430BACKSTART/RECMODELAP1234NOTE: Training Plan and Log Record are displayed only when they are in progress.Charging the BatteryAcquire Satellite SignalsOnce the Rider 30 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals. Turn on the Rider 30Press and hold the Power button to turn on the Rider 30 on.30BACKSTART/RECMODELAPPower buttonThe Rider 30Power / Back• Press and hold to turn the Rider 30 on or o.• Press to return to the previous page or cancel an operation.Lap / Down• In menu mode, press to move down to scroll through menu options.• While recording, press to start to record a lap. 3Mode / Up• Press to switch modes: Meter, Find & Go, Altitude Chart and My Buddy.• In menu mode, press to move up to scroll through menu options.Start / Stop• In menu mode, press to enter or conrm a selection.• In free cycling mode, press to start recording. Press again to stop recording.AccessoriesThe Rider comes with the following accessories:• USB cable • Bike mountOptional items:• Speed/Cadence sensor • Power adapter• Heard rate belt • Plug(s)Reset the Rider 30To reset the Rider 30, press and release both and at the same time.Status Iconsicon DescriptionBike in usedBike 1Bike 2GPS Signal StatusNo signal (not xed)Weak signalStrong signalPower StatusFull batteryHalf batteryLow batteryHeart Rate Sensor ActiveCadence Sensor ActiveTraining Plan in ProgressLog Record in Progress Manage Rider 30 Data via Your Computer1. Connect your Rider 30 to your computer by using USB cable.2. Install the Bryton Bridge application. You can download the application at http://corp.brytonsport.com/supportSDownload.html or the bundled CD that includes in the package.3. Follow the on-screen instructions to transfer data to your computer.Share Your Experience With Other BikersTo share your experiences and training result with other bikers around the world, please visit http://Brytonsport.com.Initial SetupWhen turning the Rider 30 on for the rst time, the setup wizard appears on screen. Follow the instructions to complete setup.1. Select the display language.2. Select the unit of measurement.3. Enter your “user prole”.(It is recommended to input the data. The data accuracy will highly aect your training analysis.)4. Read and accept the Safety Agreement.NOTE: If you want to change the language on the device, change the setting via Bryton Bridge -> My Rider 30 -> Device Language.Ride your Bike with Rider 30!1. Just ride with free cycling mode or set up a training program through Menu options.2. Press the Mode button to switch modes.3. Select from the available dierent modes: Meter, Find & Go, Altitude Chart and My Buddy.4. In free cycling, press to start recording log, and press again to stop recording.Switching ModesTo charge the battery, connect your Rider 30 to your computer by using USB cable.30BACKSTART/RECMODELAP
ITESNLITESNL214675330BACKSTART/RECMODELAP
Download:
Mirror Download [FCC.gov]
Document ID1367083
Application ID//OBOxH9P5UfvJSIPNrMWg==
Document DescriptionUser Manual 1 of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize43.96kB (549550 bits)
Date Submitted2010-10-27 00:00:00
Date Available2011-04-25 00:00:00
Creation Date2017-11-07 14:18:27
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-11-07 14:18:27
Document TitleRider 30 Series_QG-P1.eps
Document CreatorPScript5.dll Version 5.2.2
Document Author: moonlin
FCC ID Filing: YDM-RIDER30

Navigation menu