Bryton orporation RIDER50 GPS ENABLED CYCLING COMPUTER User Manual safty agreement cover eps
Bryton Incorporation GPS ENABLED CYCLING COMPUTER safty agreement cover eps
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2

Warranty and 
Safety Information

Safty Agreement
IMPORTANT: Please Read This Notice before Using This Product
Bryton products and accessories are not medical devices and its readings are for 
reference only. Bryton is not responsibile for the consequences of any erroneous 
readings. Always consult your physician before beginning any training program or 
using a heart rate monitor. Please do not operate the product during any activities, 
because lack of proper attention may cause injury, death or material damage. When 
using or installing this product, please comply with all applicable local laws and 
regulation.We and our manufacturers and licensors shall not assume any 
responsibility for damages arising from using this product during activities, misuse, 
improper installation, act of God, any violation of traffic or safty regulations, or 
software or map data product therein. This product is not guaranteed to be free of 
errors or deficiencies, and is not guaranteed to be applicable for any defined 
purpose. 
Battery Warnings
1. Do not leave the device exposed to a heat source or in a high temperature.
2. Do not puncture or incinerate.
3. Do not attempt to remove the non-user-replaceable battery.
4. Do not operate the device outside of the temperature range: -4 to 131oF (-20 to 
55oC).
5. Store within the following temperature range for an extended time: 32 to 77oF (0 
to 25oC)
6. Properly recycle or dispose of the device or battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiated radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment.
Industry Canada Compliance
Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including interference 
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This Category II radiocommunication device complies with Industry Canada Standard 
RSS-310. 
Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 
d’Industrie Canada.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with 
minimum distance 20cm between the radiator & your body.
This device and its antenna(s) must not be co-located or operating in conjunction 
with any other antenna or transmitter.
CE Marking Warning
This is a Class B product, in a domestic environment, this product may cause radio 
interference, in which case the user may be required to take adequate measures.
Limited Warranty
Bryton Inc. warrants its products to be free from defects in materials or workmanship 
for one year from the date of purchase. Bryton Inc. will repair or replace any 
component that fails in normal use within this limited warranty period at no charge 
to the customer for parts or labor. 
This warranty does not apply to
1. damage caused by misuse, accident, abuse, fire, or other external causes or acts of 
nature
2. physical damage to the surface, such as scratches and dents; 
3. consumable parts, such as batteries, unless product damage has occurred due to 
a defect in materials or workmanship
4. damage caused by anyone who is not an authorized service provider of Bryton 
Inc.
This Limited Warranty is subjected to the following terms and conditions:
1. To obtain warranty service, a proof of purchase, an original or copy of the sales 
receipt from the original retailer, is required.
2. Bryton Inc. retains the exclusive right to repair or replace the product or offer a full 
refund of the purchase price at its sole discretion.
3. Bryton Inc. will not replace missing components from any package purchased 
through an online auction. An original or copy of the sales receipt from the 
original retailer is required to obtain the Limited Warranty.
EN

4. To obtain warranty service, contact Bryton Inc. (www.brytonsport.com) for 
shipping instructions.
5. This Limited Warranty covers expenses for inspecting and repairing the product 
during the Limited Warranty Period. The defective product shall be delivered by 
the purchaser at his/her own expense to the designated premises together with 
the proof of purchase.
6. All replaced faulty products or components will become the property of Bryton 
Inc.
7. The repaired or replaced parts by Bryton Inc. shall continue to be warranted for 
the remaining time of the original one year warranty period or for 90 days from 
the date of repair or replacement, depending upon which is longer.
8. Back up data and remove any confidential, proprietary, or personal information 
from the Product before returning any unit for service. Bryton Inc. is not 
responsible for damage to or loss of data.
9. Bryton Inc. products are intended to be used as personal aids and must not be 
used for precise measurement of direction, location, distance or topography and 
makes no warranty as to the accuracy or completeness of map data in its 
products. 
10. Bryton Inc. reserves the right to refuse warranty claims against products or 
services that are obtained and/or used in contravention of the laws of any 
country.
11. For international purchases, a separate warranty may be provided by international 
distributors depending on the country. If applicable, this warranty is provided by 
the local in-country distributor and this distributor provides local service for your 
device. Distributor warranties are only valid in the area of intended distribution. 
EXCLUSION OF OTHER DAMAGES. TO THE FULL EXTENT ALLOWED BY LAW, BRYTON 
INC. AND ITS SUPPLIERS, AFFILIATES AND AGENTS ARE NOT LIABLE FOR ANY:
(i) CONSEQUENTIAL OR INCIDENTAL DAMAGES;
(ii) DAMAGES OR LOSS OF ANY NATURE WHATSOEVER RELATING TO LOST PROFITS, 
BUSINESS INTERRUPTION, LOSS OF DATA OR PRIVACY OR CONFIDENTIALITY, ANY 
INABILITY TO USE ALL OR PART OF THE HARDWARE DEVICE OR SOFTWARE, 
PERSONAL INJURY, OR ANY FAILURE TO MEET ANY DUTY (INCLUDING BUT NOT 
LIMITED TO ANY DUTY OF NEGLIGENCE, GOOD FAITH OR OF WORKMANLIKE 
EFFORT); OR
(iii) INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY 
WAY TO THE SOFTWARE OR HARDWARE DEVICE. THE FOREGOING APPLIES EVEN IF 
BRYTON INC. OR ANY SUPPLIER, AFFILIATE OR AGENT HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH LOSSES OR DAMAGES; AND EVEN IN THE EVENT OF FAULT, 
TORT (INCLUDING NEGLIGENCE), STRICT OR PRODUCT LIABILITY, 
MISREPRESENTATION OR OTHER REASON.
Some jurisdictions do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusions may not apply to You.