Bryton orporation RIDER50 GPS ENABLED CYCLING COMPUTER User Manual 1
Bryton Incorporation GPS ENABLED CYCLING COMPUTER Users Manual 1
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
User's Manual Table of Contents Getting Started.............4 History............................ 12 Your Rider 50................... 4 Navigate Rides from Preplanned Trip............. 12 Reset the Rider 50........... 5 Accessories....................... 5 Find Places..................... 13 Charge the Battery.......... 7 Enter a Location Name Using the On-screen Keyboard...... 14 Select a Category ............... 14 Install the Rider 50.......... 8 Find Coordinate............. 15 Mount the Rider 50 to the Bike.................................................8 Release the Rider 50.................8 My Favorite.................... 15 Status Icons...................... 6 Install the Cadence Sensor............................... 8 Install Heart Rate Belt..... 9 Turn on the Rider 50...... 10 Acquire Satellite Back To Start.................. 16 Stop Navigating............. 16 Data Recording.............. 16 History............................ 17 Use the Map................... 17 Training.......................18 Signals............................ 10 Fitness Training............. 18 Initial Setup................... 10 Calorie Burn.............................. 18 Weight Lost............................... 19 Ride your Bike with Rider 50!................................... 10 Transfer Data to Your Computer....................... 11 Share Your Experience With Other Bikers.......... 11 Find & Go.....................12 Navigate Rides from 2 Table of Contents Simple Workouts........... 21 Time and Speed...................... 21 Distance and Time................. 22 Speed and Distance.............. 22 My Buddy....................... 23 Stop Training................. 23 Step Counter...............24 Grid Display................... 25 Info Grid..................................... 25 Map Grid.................................... 26 My Buddy Grid......................... 27 Sensors........................... 28 Speed.......................................... 28 Cadence..................................... 28 Speed/Cadence....................... 29 Heart Rate................................. 29 Compass.................................... 30 Barometer................................. 30 Auto Detect.............................. 31 Distance..................................... 39 Time............................................ 39 Change Map Setting...... 40 Data Management......41 Load Files....................... 41 Insert a MicroSD Card (optional)................................... 41 Connect the USB Cable........ 41 Transfer Files to Your Computer.................................. 41 Transfer Files to Another Rider 50.......................... 42 Personalize User Profile.31 Stopwatch...................44 View GPS Status............. 32 Countdown.................... 44 Change System Timer.............................. 45 Settings.......................... 32 Backlight Time......................... 32 Brightness................................. 33 Language.................................. 33 Date Format............................. 34 Time Format............................. 34 Unit Format.............................. 35 Adjust Date and Time.... 35 Appendix.....................46 Specifications................ 46 Wheel Size and Circumference................ 48 Basic Care For Your Rider 50.......................... 50 Personalize Bike Profile.36 Alert................................ 37 Heart Rate................................. 37 Speed.......................................... 38 Cadence..................................... 38 Table of Contents 3 ENGLISH Settings.......................25 Getting Started This section will guide you on the basic preparations before you start using your Rider 50. Your Rider 50 Power • Press and hold to turn the Rider 50 on or off. • Short press to turn on or off the backlight. Start / Pause / Stop • In training mode or direction mode, press to pause recording log. Press and hold to stop recording log. 4 Getting Started • In free cycling, press to start recording and press it again to pause. Press and hold to stop recording. Info • Press to display information about the Message List, Training Overview (Displayed after started a training), Step Overview (Displayed after enabled Step Counter), or Lap info (Displayed after started a Lap training). 5-Way Navigator / Enter • Move up / down to scroll through menu settings. • Press the center to confirm a selection. • Move up / down / left / right to pen the map. • Press the center to call out the zoom in / out bar. Press it again to cancel. Menu • Press to open the menu. • Press and hold to calibrate the barometer. Mode • Press to switch modes: Grid, Map, and My Buddy. LED Indicator • Indicate the Rider 50 charging status. Back • In Map page, press to re-center grid display cursor position. • In other pages, press to return to the previous page or cancel an operation. Reset the Rider 50 To reset the Rider 50, press and hold and for five seconds. Accessories The Rider 50 comes with the following accessories: • Power adapter • Plug(s) • USB cable • Bike mount Optional items: • Cadence sensor • Heart rate belt • microSD card Getting Started 5 ENGLISH Status Icons icon Description Bike in used Bike 1 Bike 2 GPS Signal Status No signal Weak signal Strong signal Power Status Full battery Half battery Low battery Heart Rate Sensor Active Cadence Sensor Active New Message notification Training Plan in Progress Log Record in Progress NOTE: Training Plan and Log Record are displayed only when they are in progress. 6 Getting Started 4 1. Open the weather cap of the mini-USB port. 2. Connect the mini-USB end of the USB cable to the mini-USB port of the Rider 50. 3. Connect the other end to the power adapter. 4. Plug the power adapter to a wall outlet. NOTE: You can also charge the Rider 50 using your computer. When charging battery via computer, it is recommended to turn off the Rider 50 to ensure the battery will be fully charged. The Rider 50 may come with different plug head(s) suitable in the country where you purchased the device. To use the plug: 1. Pull up the default plug. 2. Press and hold the tab. 3. Insert the plug head. 4. Release the tab to lock the plug head and push the plug down. Getting Started 7 ENGLISH Charge the Battery Install the Rider 50 Mount the Rider 50 to the Bike 1. Slide to attach the Rider 50 unto the bike mount. 2. Place the bike mount on the bike. 3. Hook the rubber band to secure the bike mount. 4. Slide to attach the Rider 50 unto the bike mount. Release the Rider 50 Press the release button, then gently slide out the Rider 50. Install the Cadence Sensor Cable ties Cadence sensor 1. Attach the cadence sensor on the rear chain stay using the adhesives. 3mm Cadence magnet Cable tie 8 Getting Started 2. Loosely secure the cadence sensor using two cable ties. 3. Attach the cadence magnet to the crank arm using a cable tie. The cadence magnet must be aligned with the cadence sensor. 4. When everything is aligned, tighten the cable ties to secure the speed sensor, cadence sensor, and cadence magnet. Cadence The installed components should look like the illustration. Cadence magnet Cadence sensor Install Heart Rate Belt Clips Clip +SPORT HeartWear 2.4GHz Digital Strap FCC ID:04GHRMHW RY TE 032 ORAT AP Battery compartment Electrodes 1. Unclip the heart rate belt. 2. Wet the electrodes on the underside of the belt. 3. Adjust the strap to fit around your body snugly. 4. Wear the strap around your chest, just below the breastplate. Clip to secure the heart rate belt. NOTE: In cold weather, wear appropriate clothing to keep the heart rate belt warm. Getting Started 9 ENGLISH NOTE: To ensure optimum performance, the distance between the sensor and the magnet must be within 3 mm. Turn on the Rider 50 Press and hold the Power button to turn the Rider 50 on. Acquire Satellite Signals Once the Rider 50 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals. The GPS signal icon turns blue when GPS is fixed. Initial Setup When turning the Rider 50 on for the first time, the setup wizard appears on screen. Follow the instructions to complete setup. 1. Select the display language. 2. Select the unit of measurement. 3. Enter your personal information. 4. Read and accept the Safety Agreement. Ride your Bike with Rider 50! 1. Press the Mode button to switch modes. 2. Select from the available different modes: Grid, Map, and My Buddy. If the screen is at the Grid mode, use the 5-way navigator to change the setting. 3. In free cycling, press to start recording and press it again to pause. Press and hold to stop recording. 10 Getting Started 1. Open the weather cap of the mini-USB port. 2. Connect the mini-USB end of the USB cable to the mini-USB port of the Rider 50. 3. Connect the other end to your computer. The Rider 50 resets and enters the USB mode. The computer automatically detects the Rider 50 and installs the necessary driver and application. 4. After installation, launch the Bryton Bridge application. 5. Follow the on-screen instructions to transfer data to your computer. NOTE: After unplugging the Rider 50 from the USB, the Rider 50 will reset itself. Share Your Experience With Other Bikers To share your experiences with other bikers around the world, please visit http://Brytonsport.com. Getting Started 11 ENGLISH Transfer Data to Your Computer Find & Go With the Find & Go feature, you can navigate rides from history, preplanned trip and My Favorite list. You also can find your points of interest by entering the name or coordinate of the location. 1. Press the Menu open the menu. button to 2. Use the 5-way navigator to select Find & Go. • Move the 5-way navigator up / down to select the item. • Press the center to confirm. Navigate Rides from History You can navigate any ride saved in your Rider 50 history. 1. In the Find & Go menu, use the 5-way navigator to select History. 2. Select a ride from the list. 3. Highlight confirm. and press the center of the 5-way navigator to Navigate Rides from Preplanned Trip You can navigate a ride uploaded to your Rider 50 from the Bryton Bridge application. 1. Prepare your trip via Bryton Bridge application. 2. Connect your Rider 50 with the computer using the USB cable. 3. Follow the on-screen instructions to transfer data to your Rider 50. 4. Press the Menu 12 Find & Go button. 6. Select a ride from the list and press the center of the 5-way navigator to confirm. It displays the details of the ride. Select an option: - display the available tracks (waypoints) on the map. - display the turns list of the track that includes the turn direction and the street name. - display your current position and start navigating the ride. NOTE: To add a location into My Favorite list, press the Info button. Highlight and enter the location name. Find Places You can search for points of interest from the saved waypoints (location) and recent finds in your Favorites. 1. In the Find & Go menu, use the 5-way navigator to select Find POI. 2. Use the 5-way navigator to select Name or Category. 3. Enter a name and select a category. 4. To start searching, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. Find & Go 13 ENGLISH 5. Use the 5-way navigator to select Find & Go > Preplanned Trip. Enter a Location Name Using the On-screen Keyboard 1. Move the 5-way navigator up / down / left / right to select the character. 2. Press the center of the 5-way navigator to confirm the selection. • To toggle between upper and lower case letter, select • To change the input method, select • To move the cursor position, select or 3. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. Select a Category 1. Move the 5-way navigator up / down to select the desired category. 2. Press the center of the 5-way navigator to confirm the selection. 14 Find & Go You can search for places from the saved waypoints (location) and recent finds in your Favorites by entering the coordinate of the location. 1. In the Find & Go menu, use the 5-way navigator to select Find Coordinate. 2. Use the 5-way navigator to enter the new coordinate. • To move to another field, select or . You can also change the coordinate by selecting or 3. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. My Favorite You can navigate any ride saved in My Favorite. 1. In the Find & Go menu, use the 5-way navigator to select My Favorite. 2. Select a place from the list and press the center of the 5-way navigator to confirm. It displays the POI details. 3. Use the 5-way navigator to highlight to start navigating the ride. Find & Go 15 ENGLISH Find Coordinate Back To Start After you have reached your destination or finished your ride, press the Menu button and use the 5-way navigator to select Find & Go > Back to Start. The Rider 50 navigates you back to your starting point. Stop Navigating To stop your ride: 1. Press the Menu button. 2. Use the 5-way navigator to select Find & Go > Stop Trip. Data Recording The Rider 50 can record points every second of your ride. • In training mode or direction mode, press to pause recording log. Press and hold to stop recording log. • In free cycling, press to start recording and press it again to pause. Press and hold to stop recording. 16 Find & Go The Rider 50 automatically saves the history as the timer starts. History includes date, time, distance, average speed and altitude. After you have finished a ride, you can view the history data on the Rider 50. To view your history: 1. Press the Menu open the menu. button to 2. Use the 5-way navigator to select Find & Go > History. NOTE: You can also upload your history to Bryton Bridge to keep track of all your ride data. See “Data Management” on page 41. Use the Map Press the Mode button to switch to Map mode. When you begin your ride, a dotted line (track) appears on the map, showing you exactly where you have travelled. Use the 5-way navigator to zoom on the map: • Press the center to call out the zoom in / out bar. • Move up / down / left / right to pen the map. Find & Go 17 ENGLISH History Training Bicycling is one of the best type of exercise for your body. It helps you to burn your calories, lose weight and increase your overall fitness. With the Rider 50 Training feature, you can set fitness training plans or simple workouts and train with your virtual partner, My Buddy. Use the Rider 50 to track your training or workout progress. 1. Press the Menu open the menu. button to 2. Use the 5-way navigator to select Training. • Move the 5-way navigator up / down to select the item. • Press the center to confirm. Fitness Training You can create a training plan that can help you lose weight. Calorie Burn 1. In the Training menu, use the 5-way navigator to select Fitness > By Calories. 2. Set your goal (time period and total calories burned). 3. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. 18 Training 5. Go for a ride. The Rider 50 switches to My Buddy mode, and calculates the total calories you have burned as you ride the bike. Weight Lost 1. In the Training menu, use the 5-way navigator to select Fitness > By Weight. 2. Set your goal (time period and total weight lost). 3. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. 4. The current fitness training details appear on the screen. Press the center of the 5-way navigator to confirm. 5. Go for a ride. The Rider 50 switches to My Buddy mode, and calculates the total weight lost as you ride the bike. Training 19 ENGLISH 4. The current fitness training details appear on the screen. Press the center of the 5-way navigator to confirm. Using the On-screen Keyboard 1. Move the 5-way navigator up / down / left / right to select the number. • Highlight to reset the data. • Highlight to erase the data. • Highlight or to move the cursor location. 2. Press the center of the 5-way navigator to confirm the selection. 3. When finished, use the 5-way navigator to highlight the center of the 5-way navigator to confirm. • Highlight 20 Training to cancel the setting. and press You can set simple workouts by entering your time, distance, or pace goals, and My Buddy will assist you to achieve them. The Rider 50 offers you with three types of simple workouts: • By Time (Time and Speed) • By Distance (Distance and Time) • By Speed (Speed and Distance) Time and Speed 1. Press the Menu button. 2. Use the 5-way navigator to select Simple > By Time. 3. Set your time and speed. 4. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. 5. The current workout details appear on the screen. Press the center of the 5-way navigator to confirm. 6. Go for a ride. Training 21 ENGLISH Simple Workouts Distance and Time 1. Press the Menu button. 2. Use the 5-way navigator to select Simple > By Distance. 3. Set your distance and time. 4. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. 5. The current workout details appear on the screen. Press the center of the 5-way navigator to confirm. 6. Go for a ride. Speed and Distance 1. Press the Menu button. 2. Use the 5-way navigator to select Simple > By Speed. 3. Set your speed and distance. 4. When finished, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. 5. The current workout details appear on the screen. Press the center of the 5-way navigator to confirm. 6. Go for a ride. 22 Training My Buddy is your virtual partner that is designed to help you to meet your training or simple workout goals. My Buddy You 1. Set up a fitness training plan or a simple workout. 2. Go for a ride. The Rider 50 displays My Buddy, and it competes with you during the training. NOTE: You can customize the data fields on My Buddy mode. See “My Buddy Grid” on page 27. Stop Training You can stop the current training or simple workout after you have reached your goal, or you decide to end the current training. 1. Press the Menu button. 2. Use the 5-way navigator to select Training. A “Do you want to stop the last training?” message appears on the screen. 3. To stop the current training or simple workout, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. Training 23 ENGLISH My Buddy Step Counter With the Step Counter feature, you can record the number of steps that you take. It can also determine the distance you have covered and calculate how many calories you have burned up. Use your step counter to track your progress. 1. Press the Menu open the menu. button to 2. Use the 5-way navigator to select Step Counter. • Move the 5-way navigator up / down to select the item. • Press the center to confirm. 3. Start walking. The Rider 50 automatically counts each step you take. 24 Step Counter With the Settings feature, you can customize data field, grid settings, sensor settings, system settings, bike and user profile, alerts setup, and map setting. 1. Press the Menu open the menu. button to 2. Use the 5-way navigator to select Settings. • Move the 5-way navigator up / down to select the item. • Press the center to confirm. Grid Display You can set the grid setting for the information, map and My Buddy displays. Info Grid 1. In the Settings menu, use the 5-way navigator to select Grid Display > Info Grid. 2. Move the 5-way navigator left / right to select the number of grid display and press the center to confirm. 3. Use the 5-way navigator to select the item field that you want to customize. 6-grid display Settings 25 ENGLISH Settings 4. Move the 5-way navigator up / down to select the item setting, and press the center to confirm. 5. Move the 5-way navigator up / down to select the desired setting. 6. When finished, press the center of the 5-way navigator to confirm. Map Grid 1. In the Settings menu, use the 5-way navigator to select Grid Display > Map Grid. 2. Move the 5-way navigator left / right to select the number of grid display and press the center to confirm. 3. Use the 5-way navigator to select the item field that you want to customize. 3-grid display 4. Move the 5-way navigator up / down to select the item setting, and press the center to confirm. 5. Move the 5-way navigator up / down to select the desired setting. 6. When finished, press the center of the 5-way navigator to confirm. 26 Settings 1. In the Settings menu, use the 5-way navigator to select Grid Display > My Buddy Grid. 2. Move the 5-way navigator left / right to select the number of grid display and press the center to confirm. 3. Use the 5-way navigator to select the item field that you want to customize. 3-grid display 4. Move the 5-way navigator up / down to select the item setting, and press the center to confirm. 5. Move the 5-way navigator up / down to select the desired setting. 6. When finished, press the center of the 5-way navigator to confirm. Settings 27 ENGLISH My Buddy Grid Sensors You can customize the sensor settings such as enable/disable the function, scan or do calibration for the Rider 50. Speed 1. In the Settings menu, use the 5-way navigator to select Sensors > Speed. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • On: enable the sensor. • Off: disable the sensor. • Scan: scan to detect the speed sensor. Cadence 1. In the Settings menu, use the 5-way navigator to select Sensors > Cadence. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • On: enable the sensor. • Off: disable the sensor. • Scan: scan to detect the cadence sensor. 28 Settings 1. In the Settings menu, use the 5-way navigator to select Sensors > Speed/Cadence. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • On: enable the sensor. • Off: disable the sensor. • Scan: scan to detect both speed and cadence sensors. NOTE: When the cadence sensor is paired, the icon appears on the main screen. cadence sensor Heart Rate 1. In the Settings menu, use the 5-way navigator to select Sensors > Heart Rate. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • On: enable the sensor. • Off: disable the sensor. • Scan: scan to detect the heart rate sensor. NOTE: When the heart rate belt is paired, the appears on the main screen. heart rate icon Settings 29 ENGLISH Speed/Cadence Compass 1. In the Settings menu, use the 5-way navigator to select Sensors > Compass. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • On: enable the sensor. • Off: disable the sensor. • Calibration: calibrate the Rider 50 G-Sensor. Follow the on-screen instructions to calibrate your device. Barometer 1. In the Settings menu, use the 5-way navigator to select Sensors > Barometer. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • On: enable the sensor. • Off: disable the sensor. • Calibration: calibrate the Rider 50 G-Sensor. • Home Altitude: set the home altitude with the on-screen keyboard. 30 Settings 1. In the Settings menu, use the 5-way navigator to select Sensors > Auto Detect. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Yes: automatically scan the sensors. • No: manually scan the sensors. Personalize User Profile You can change your personal information. 1. In the Settings menu, use the 5-way navigator to select User Profile. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Name: enter your name using the on-screen keyboard. • Gender: select your gender. • Birthday: enter your birthday. • Height: set your height. • Weight: set your weight. Settings 31 ENGLISH Auto Detect View GPS Status You can view the information about the GPS signal the Rider 50 is currently receiving. The GPS signal icon turns blue when GPS is fixed. 1. In the Settings menu, use the 5-way navigator to select GPS Status. 2. Move the 5-way navigator left / right to select the desired setting and press the center to confirm. • On: enable the GPS satellites. The Rider 50 will automatically search for satellite signals. • Off: disable the GPS satellites. Change System Settings You can customize the Rider 50 system settings such as backlight time, brightness, on-screen display language, and time/unit data format. Backlight Time 1. In the Settings menu, use the 5-way navigator to select System > Backlight Time. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. 32 Settings 1. In the Settings menu, use the 5-way navigator to select System > Brightness. 2. Move the 5-way navigator up / down to adjust the brightness level and press the center to confirm. Language 1. In the Settings menu, use the 5-way navigator to select System > Language. 2. Move the 5-way navigator up / down to select the desired language and press the center to confirm. Settings 33 ENGLISH Brightness Date Format 1. In the Settings menu, use the 5-way navigator to select System > Time/Unit > Date. 2. Move the 5-way navigator up / down to select the desired date format and press the center to confirm. Time Format 1. In the Settings menu, use the 5-way navigator to select System > Time/Unit > Time. 2. Move the 5-way navigator up / down to select the desired time format and press the center to confirm. 34 Settings 1. In the Settings menu, use the 5-way navigator to select System > Time/Unit > Unit. 2. Move the 5-way navigator up / down to select the desired unit format and press the center to confirm. Adjust Date and Time You can adjust the current date and time. 1. In the Settings menu, use the 5-way navigator to select System > Time/Unit > Date or Time. 2. Enter the new date or adjust the current time setting with the onscreen keyboard. 3. When finished, use the 5-way navigator to highlight the center of the 5-way navigator to confirm. and press Settings 35 ENGLISH Unit Format Personalize Bike Profile You can customize your bicycle(s) profile. 1. In the Settings menu, use the 5-way navigator to select Bike profile > Bike 1 or Bike 2. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Status: set the bike status. • Name: enter the bike name using the on-screen keyboard. • Bike Type: select the bike type. • Weight: set the bike weight. • Wheel: set the bike wheel size. • Total Mileage: set the total mileage of the bike ride. NOTE: For details on wheel size, see “Wheel Size and Circumference” on page 46-47. 36 Settings With the Alert feature, the Rider 50 beeps and displays a message to notify you if: • your heart rate exceeds or drops below a specific number of beats per minute (bpm). • you exceed or drop below a custom speed setting during your ride. • your cadence speed exceeds or drops below a specific number of revolutions of the crank arm per minute (rpm). • you reach a certain amount of distance for the long workouts. • you reach a certain amount of time for the long workouts. NOTE: To use the heart rate, speed or cadence alerts, you must have a Rider 50, a heart rate belt and cadence sensor. For installation guideline, see “Install Heart Rate Belt” and “Install the Cadence Sensor” on page 8-9. Heart Rate 1. In the Settings menu, use the 5-way navigator to select Alert > Heart Rate. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Alert: set the alert status. • Max HR: specify the maximum heart rate. • Min HR: specify the minimum heart rate. Settings 37 ENGLISH Alert Speed 1. In the Settings menu, use the 5-way navigator to select Alert > By Speed. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Alert: set the alert status. • Max Speed: specify the maximum speed. • Min Speed: specify the minimum speed. Cadence 1. In the Settings menu, use the 5-way navigator to select Alert > By Cadence. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Alert: set the alert status. • Max Cadence: specify the fastest cadence amount in revolutions of the crank arm per minute (rpm). • Min Cadence: specify the slowest cadence amount in revolutions of the crank arm per minute (rpm). 38 Settings 1. In the Settings menu, use the 5-way navigator to select Alert > By Distance. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Alert: set the alert status. • Distance: specify the maximum distance. Time 1. In the Settings menu, use the 5-way navigator to select Alert > By Time. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • Alert: set the alert status. • Time: specify the maximum riding time. Settings 39 ENGLISH Distance Change Map Setting You can change the orientation of the map. 1. In the Settings menu, use the 5-way navigator to select Map > Rotate to heading. 2. Move the 5-way navigator up / down to select the desired setting and press the center to confirm. • true: rotate the map according to the heading direction. • false: display the map as normal bird view. 40 Settings You can use the Rider 50 as a USB mass storage device, and you can purchase a separate micro SD card for additional external memory. Load Files Insert a MicroSD Card (optional) Insert a microSD card with the golden contact area facing downwards as shown on the illustration. Connect the USB Cable 1. Open the weather cap of the mini-USB port. 2. Connect the mini-USB end of the USB cable to the mini-USB port of the Rider 50. 3. Connect the other end to your computer. The Rider 50 resets and enters the USB mode. The computer automatically detects the Rider 50 and installs the necessary driver and application. Transfer Files to Your Computer 1. Launch the Bryton Bridge application. 2. Follow the on-screen instructions to transfer data to your computer. NOTE: Upload your history and My Favorite list to Bryton Bridge to keep track of all your ride data. Data Management 41 ENGLISH Data Management Transfer Files to Another Rider 50 With the Knock-Knock feature, you can transfer files to another Rider 50 using wireless technology. 1. Turn on both Rider 50 units, and bring them within range (4 m) of each other. 2. Press the Menu open the menu. button to 3. Use the 5-way navigator to select Knock Knock. • Move the 5-way navigator up / down to select the item. • Press the center to confirm. Transfer Data 1. In the Knock Knock menu, use the 5-way navigator to select Transfer Data. 2. Move the 5-way navigator up / down to select the data items that you want to share and press the center to confirm. 3. When finished, use the 5-way navigator to select Knock Knock. 4. A “Ready to Knock” window appears on the screen. Press the center of the 5-way navigator to confirm. NOTE: Bring both Rider 50 units within 4 meters (or closer) range of each other. 42 Data Management Receive Data 1. In the Knock Knock menu, use the 5-way navigator to select Receive Data. 2. A “Ready to Knock” window appears on the screen. Press the center of the 5-way navigator to confirm. 3. To accept receiving data from another Rider 50 unit, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. NOTE: The duration of file transfer depends on the file size. It is recommended to transfer smaller file size on each data sharing. Data Management 43 ENGLISH 5. To start transferring data, use the 5-way navigator to highlight and press the center of the 5-way navigator to confirm. Stopwatch With the Stopwatch feature, you can measure the amount of time elapsed from the time the Rider 50 is activated and deactivated. You can switch between two modes: Countdown and Timer. Countdown is used to notify you when a set amount of time has passed. Timer is used to measure how long something takes. 1. Press the Menu open the menu. button to 2. Use the 5-way navigator to select Stopwatch. • Move the 5-way navigator up / down to select the item. • Press the center to confirm. Countdown 1. In the Stopwatch menu, use the 5-way navigator to select Countdown. 2. Set the countdown time, and highlight and press the center of the 5-way navigator to confirm. 3. To start the countdown, move the 5-way navigator left /right to highlight and press the center of the 5-way navigator to confirm. 44 Stopwatch 5. To reset the countdown, move the 5-way navigator left /right to highlight and press the center of the 5-way navigator to confirm. Timer 1. In the Stopwatch menu, use the 5-way navigator to select Timer. 2. To start the timer running, press the center of the 5-way navigator to confirm. 3. To record a lap while the watch is running, move the 5-way navigator left /right to highlight and press the center of the 5-way navigator to confirm. It displays the first lap time. • Repeat this step to create a new lap. 4. To stop the watch, move the 5-way navigator left /right to highlight and press the center of the 5-way navigator to confirm. Stopwatch 45 ENGLISH 4. To pause the countdown, move the 5-way navigator left /right to highlight and press the center of the 5-way navigator to confirm. Appendix Specifications Rider 50 Item Description Display 2.2” Color LCD Resolution 176 x 220 Physical size 54.7 x 96 x 21.6 mm (2.15” x 3.77” x 0.85”) Weight 106 g (3.73 oz) Operating temperature -15oC ~ 50oC Battery Charge temperature 0oC ~ 40oC Battery 1200mAh rechargeable Li Battery Battery life With backlight off, it can work up to 12 hours GPS Integrated high-sensitivity ST GPS receiver with embedded patch antenna RF transceiver 2.4GHz ANT+ transceiver with embedded antenna Storage Embedded 2GB iNAND, support microSD up to 32GB Barometer 300 ~ 1100 hPA (+9000 ~ -500 m above the see level) 46 Appendix ENGLISH Cadence Sensor Item Description Physical size 37.5 x 35 x 12 mm Weight 25 g Water Resistance 1 ATM Transmission range 3m Battery life 8 hours per week Operating temperature 5oC ~ 40oC Radio frequency/protocol 2.4GHz / Dynastream ANT+ Sport wireless communications protocol Accuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from transmitter. Heart Rate Monitor Item Description Physical size 34.7 x 3.4 x 1.1 cm Weight 44 g Water Resistance 10 m Transmission range 3m Battery life 3 years Operating temperature 0oC ~ 50oC Radio frequency/protocol 2.4GHz / Dynastream ANT+ Sport wireless communications protocol Accuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from transmitter. Appendix 47 Wheel Size and Circumference The wheel size is marked on both sides of the tires. Wheel Size L (mm) Wheel Size L (mm) 12 x 1.75 935 24 x 1.75 1890 14 x 1.5 1020 24 x 2.00 1925 14 x 1.75 1055 24 x 2.125 1965 16 x 1.5 1185 26 x 7/8 1920 16 x 1.75 1195 26 x 1(59) 1913 18 x 1.5 1340 26 x 1(65) 1952 18 x 1.75 1350 26 x 1.25 1953 20 x 1.75 1515 26 x 1-1/8 1970 20 x 1-3/8 1615 26 x 1-3/8 2068 22 x 1-3/8 1770 26 x 1-1/2 2100 22 x 1-1/2 1785 26 x 1.40 2005 24 x 1 1753 26 x 1.50 2010 24 x 3/4 Tubular 1785 26 x 1.75 2023 24 x 1-1/8 1795 26 x 1.95 2050 24 x 1-1/4 1905 26 x 2.00 2055 48 Appendix L (mm) Wheel Size L (mm) 26 x 2.10 2068 700 x19C 2080 26 x 2.125 2070 700 x 20C 2086 26 x 2.35 2083 700 x 23C 2096 26 x 3.00 2170 700 x 25C 2105 27 x 1 2145 700 x 28C 2136 27 x 1-1/8 2155 700 x 30C 2170 27 x 1-1/4 2161 700 x 32C 2155 27 x 1-3/8 2169 700C Tubular 2130 650 x 35A 2090 700 x 35C 2168 650 x 38A 2125 700 x 38C 2180 650 x 38B 2105 700 x 40C 2200 700 x 18C 2070 Appendix 49 ENGLISH Wheel Size Basic Care For Your Rider 50 Taking good care of your Rider 50 will reduce the risk of damage to your Rider 50. • Do not drop your Rider 50 or subject it to severe shock. • Do not expose your Rider 50 to extreme temperatures and excessive moisture. • The screen surface can easily be scratched. Use the non-adhesive generic screen protectors to help protect the screen from minor scratches. • Use diluted neutral detergent on a soft cloth to clean your Rider 50. • Do not attempt to disassemble, repair or make any modifications to your Rider 50. Any attempt to do so will make the warranty invalid. 50 Appendix
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:7e35d639-6874-472f-958d-f7a453da9100 Document ID : adobe:docid:indd:3d50c046-51e3-11df-af43-dcc40c221405 Rendition Class : proof:pdf Derived From Instance ID : e3f612dd-51cf-11df-bf54-c7daac93c89b Derived From Document ID : adobe:docid:indd:e3f612d9-51cf-11df-bf54-c7daac93c89b Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54, uuid:AE2D03DAE551DF119C6F81D434B8FF54 Manifest Reference Document ID : uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54, uuid:AD2D03DAE551DF119C6F81D434B8FF54 Create Date : 2010:05:20 14:04:52+08:00 Modify Date : 2010:05:20 18:27:11+08:00 Metadata Date : 2010:05:20 18:27:11+08:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8610 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 52 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools