Building Automation SM061025 Temperature sensor for food applications User Manual SM061025 users manual
Building Automation Products, Inc. Temperature sensor for food applications SM061025 users manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1276114 |
| Application ID | WtSH4y6e0hyy3lo84C8kTA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.66kB (120712 bits) |
| Date Submitted | 2010-05-04 00:00:00 |
| Date Available | 2010-05-04 00:00:00 |
| Creation Date | 2010-01-20 09:51:55 |
| Producing Software | Jaws PDF Creator v3.3.1711 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Microsoft Word - SM061025 _users manual_.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | john@JOHNEXECOFFICE |
750 North Royal Avenue, Gays Mills, WI 54631 USA Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • E-mail:sales@bapihvac.com • www.bapihvac.com Building Automation Products, Inc. FCC ID: T4FSM061025 Installation and Operation Instructions for the Wireless Temperature Sensor for food applications. Building Automation Products, Inc. Wireless Temperature Sensor for Food Applications Installation and Operation Instructions Description The Building Automation Products, Inc. Wireless Temperature Sensor, Model BA/WFP-x is a battery operated, mobile sensor with a 418 MHz radio transmitter. [x = S for the straight probe version and B for the bent probe] The BA/WFP-x is designed to require very little energy; the internal 3.6 Volt Lithium battery will operate the sensor for 2 to 3 years in normal operation The BA/WPF-x enclosure is designed to mount on the side of food container through the use of different clips. The sensor’s height is adjustable to ensure proper food temperature monitoring. The enclosure is a three part, specially designed enclosure which allows for identification, battery replacement and proper cleaning. The BA/WPF-x has one internal push-button which allows for easy training and identification of the transmitter. The push-button is used when linking the transmitter to a Receiver Module. See BAPI’s INS/OPS for details. The BA/BPF-x also has an internally mounted LED. The LED will flash briefly when the sensor transmits a data packet using the 418 MHz radio. This happens roughly about once every 10 seconds or shortly after the use of the push-button. Upgrade to BAPI. 100% Compatible. Guaranteed. Sensors for HVAC/R — Temperature • Humidity • Pressure • Air Quality 750 North Royal Avenue, Gays Mills, WI 54631 USA Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • E-mail:sales@bapihvac.com • www.bapihvac.com Building Automation Products, Inc. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC ID: T4FSM061025 MADE IN USA WARNING: Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESERED OPERATION Upgrade to BAPI. 100% Compatible. Guaranteed. Sensors for HVAC/R — Temperature • Humidity • Pressure • Air Quality
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 2 Create Date : 2010:01:20 09:51:55+05:00 Creator : PScript5.dll Version 5.2.2 Author : john@JOHNEXECOFFICE Producer : Jaws PDF Creator v3.3.1711 Title : Microsoft Word - SM061025 _users manual_.docEXIF Metadata provided by EXIF.tools