Building Robotics CK1U Enlighted Commissioning Key User Manual CK 1U 01 UserGuide Rev3x

Download:
Mirror Download [FCC.gov]
Document ID	3215659
Application ID	1UD6cN7sL7wOeTGpcatVjw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.38kB (229698 bits)
Date Submitted	2016-12-02 00:00:00
Date Available	2016-12-02 00:00:00
Creation Date	2016-11-30 09:57:15
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-11-30 09:57:15
Document Title	Microsoft Word - CK-1U-01_UserGuide_Rev3.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mary

Enlighted
Commissioning Key
(CK‐1U‐01)
User Guide
Copyright © 2016
Doc: 93‐01320‐01 Rev02
The Enlighted Commissioning Key plugs into a tabletto communicatewirelessly using LQI (Link Quality
Indicator) radio signals with sensorsfixed on the ceiling of a room. The commissioning key connects to the
tablet via a micro‐USB cable. The commissioning key,along with an application running on the
tablet,detects and assigns locationsto sensors on the ceiling.
Enlighted
Sensors Sensors
Enlighted
USB Dongle
Commissioning
Key
Figure 1: Commissioning Key Set Up
Federal Communications Commission Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particularinstallation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separa on between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules and Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions:

this device may not cause harmful interference, AND
93‐01320‐01 Rev02
Enlighted Inc.
Page 2

this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by Enlighted Inc. could void the user's authority to
operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:


l'appareil ne doit pas produire de brouillage, ET
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
NCC Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or change
the characteristic and functions of the original design of the certified lower power frequency electric
machinery.
Article 14
The application of lower power frequency electric machineries shall not affect the navigation safety nor
interfere a legal communication, if an interference is found, the service will be suspended until
improvement is made and the interference no longer exists.
IC Warning Statement
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Model: CK‐1U‐01
FCCID: AQQ‐CK1U
IC:10138A‐CK1U
Manufacturer
Enlighted Inc.
930 Benecia Ave, Sunnyvale, CA 94085
Phone: 1.650.964.1094
Web: enlightedinc.com
Copyright© 2016Enlighted Inc. Allrightsreserved.
Allotherbrandorproductnamesaretrademarksof their respective companies ororganizations.
93‐01320‐01 Rev02
Enlighted Inc.
Page 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mary
Create Date                     : 2016:11:30 09:57:15+08:00
Modify Date                     : 2016:11:30 09:57:15+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - CK-1U-01_UserGuide_Rev3.docx
Creator                         : mary
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:54a43517-1189-43ff-8de3-5f5ea4f5d9b3
Instance ID                     : uuid:8590c19a-8aff-4216-b6e0-332b6e99962c
Page Count                      : 3

EXIF Metadata provided by EXIF.tools