Bullitt Group MOOB Audio On Plus User Manual 15 MOOB CHGM 000 001 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	2719011
Application ID	T2DynJRWN5KebwmD8hb8DQ==
Document Description	15_MOOB-CHGM-000-001 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.23kB (365411 bits)
Date Submitted	2015-08-19 00:00:00
Date Available	2015-08-19 00:00:00
Creation Date	2015-07-07 13:59:17
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-08-17 09:42:27
Document Title	15_MOOB-CHGM-000-001 UserMan
Document Creator	Adobe InDesign CS6 (Macintosh)

Audio On Plus
Quick Start Guide
MOOB-CHGM-000-001
FCC ID:ZL5MOOB
EN
Audio On Plus
Wireless Bluetooth® On Ear Headphones
1 Compact fold
Fold inwards to store away.
2 Adjustablibilty
Slide the headband to adjust the size.
3 Standby
Press and hold to turn your
headphones on, and again to turn off.
4 Bluetooth
To connect your headphones to
your Bluetooth device 1ST turn on
Bluetooth and scan for devices,
select Audio On Plus from the menu
On your headphones press and hold
(2-3 secs) after power on to enter
pairing mode, the status LED will
blink blue then white repeatedly until
paired, then the status LED will flash
blue on/off
5 Micro USB
Use the provided USB cable to charge
your headphones.
6 Remote Control Socket
Plug in the optional wired controller
provided.
7 Mic
8 Status LED
Fast blink blue then white = ready to pair.
Flash blue equal on/ off = paired.
Flash white equal on/ off= Bluetooth connected and music is streaming.
Solid white = Unit is charging in standby mode.
Solid blue = Fully charged (connected to power supply) in standby mode.
Audible tone (every 5 mins) and LED will flash blue until either unit is plugged into
charge or auto-off at critical Low battery level = unit is streaming music and low charge.
Call Mode
Flash white equal on/off = call in progress
Audible tone (every 5 mins) and LED will flash blue until either unit is plugged into
charge or auto-off at critical Low battery level = call in progress and low charge.
9 Touch Pad
Use the touch pad (right ear cup) to take a call
or play, skip and change volume of music.
Music Mode
Move your finger, or touch the centre of the logo
as shown in the folowing images.
To clear paired devices from memory,
touch for 2 to 3 seconds (in Pairing Mode).
Swipe right to left (back to front) for the
PREVIOUS track.
Volume
Swipe upwards to INCREASE volume.
Call Mode
Swipe downwards to DECREASE volume.
Single touch to ANSWER a call.
Music Mode
Single touch to PLAY.
Swipe left to right (front to
back) for the NEXT track.
Single touch to END a call.
Call Mode
Single touch to PAUSE.
Touch for 2 to 3 seconds to REFUSE an
incoming call.
Double touch quickly to dial the
PREVIOUS number.
In Line Remote Control (optional)
10 Volume Up
11 Volume Down
12 Multifunction button
Press once to Play or Pause.
Press twice to go to the Next track.
Press three times to go to the Previous
track.
Call Mode
Press once to accept an incoming call.
Press and hold button to reject an
incoming call.
1x
10
2x
12
3x
11
1x
NOTE:The product also supports NFC function.
www.ministryofsound.com/audio
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Warning                         : Invalid secondary xref table
Tagged PDF                      : No
Page Count                      : 5
Create Date                     : 2015:07:07 13:59:17+01:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Producer                        : Adobe PDF Library 10.0.1
Modify Date                     : 2015:08:17 09:42:27+08:00
Trapped                         : False

EXIF Metadata provided by EXIF.tools