Bury and Co KG FINDMATE Low Energy Tag for MINI User Manual UserManual
Bury GmbH & Co KG Low Energy Tag for MINI UserManual
UserManual
MINI FINDMATE FM01
Principle
MINI FINDMATE contains two electronic luggage
tags that can be connected by means of an app to a
compatible smartphone.
General
A distinction is made whether a luggage tag is
located within or outside the reception range.
Among other things, the app provides the following
possibilities:
▷ It indicates whether a luggage tag is located
within or outside the reception range.
▷ An alarm can be set for the case that a luggage
tag leaves the reception range.
▷ Using the smartphone, an alarm can be
triggered in the luggage tag.
▷ Using a button on the luggage tag, an alarm
can be triggered on the the smartphone.
▷ If a luggage tag leaves the reception range, the
position of the smartphone on which the signal
of the luggage tag was last received is saved.
It is irrelevant whether the luggage tag or the
smartphone is moved, as only the connection
between the two objects is evaluated. The
following use cases, for example, arise:
▷ The luggage tag is attached to an object that
the user has to take the next day. An alarm is
triggered on the smartphone as soon as the
smartphone leaves the reception range. To find
the object quickly, an alarm can be triggered in
the luggage tag using the smartphone.
MINI Connected
▷
The luggage tag is left at a fixed position that is
to be found again.
On leaving the reception range, the last
position of the smartphone on which the signal
of the luggage tag was received is saved. This
position can be found using the navigation
system of the smartphone, e.g. a parked car in
a big city.
▷
The smartphone i
s to be found with the
help of the luggage tag. Using the button on
the luggage tag, an alarm is triggered on the
the smartphone.For this, the smartphone must
be located within the reception range.
A detailed description can be found in the tutorial
for the MINI FINDMATE app.
Functional requirements
▷ The necessary app is installed on a compatible
smartphone.
▷ The luggage tag is logged in at the smartphone.
Connection to the vehicle
If the smartphone is connected to the vehicle, for
example the following information can be shown on
the Control Display:
▷
A list of the luggage tags logged in at the
smartphone.
▷
The last position of the smartphone on which
the signal of each luggage tag was received.
▷
Current reminder alarms that were, for
example, overlooked on leaving home.
Further Information
Approval and declaration of conformiry
This device complies with Part 15 of the FCC Rules and with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
FCC ID: QZ9-FINDMATE
IC ID: 5927A- FINDMATE
NOTICE:
Changes or modifications made to this equipment not expressly approved by Bury
GmbH & Co. KG may void the FCC authorization to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.