Business Machines 20020302R1L IBM ThinkPad T40 Series - UNII User Manual HE102 Users Guide 1 2

International Business Machines Corporation IBM ThinkPad T40 Series - UNII HE102 Users Guide 1 2

Contents

Supplemental Response to TC3011 Users Manual

3938FCC StatementNote: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmfulinterference in a res-idential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged totry to connect the interference by one or more of the following measures:-Reorient the receiving antenna-Increase the separation between the equipment and receiver-Move the computer away from the receiver-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Radio Frequency Interference Requirements:This device is restricted toindoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requiresthis product to be used indoors for the frequency range 5.15 to 5.25 GHz to reducethe potential for harmful interference to co-channel Mobile Satellite systems.High power radar are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to5.85 GHz bands. These radar stations can cause interference with and /or damage thisdevice.Actiontec Electronics, Inc. Limited WarrantyHardware: Actiontec Electronics Inc. warrants to the end user (“Customer”) thatthis hardware product will be free from defects in workmanship and materials, undernormal use and service, for twelve (12) months from the date of purchase fromActiontec Electronics or its authorized reseller.Actiontec Electronics’ sole obligation under this express warranty shall be, atActiontec’s option and expense, to repair the defective product or part, deliver toCustomer an equivalent product or part to replace the defective item, or if neitherof the two foregoing options is reasonably available, Actiontec Electronics may, in itssole discretion, refund to Customer the purchase price paid for the defective prod-uct. All products that are replaced will become the property of Actiontec ElectronicsInc. Replacement products may be new or reconditioned. Actiontec Electronicswarrants any replaced or repaired product or part for ninety (90) days from ship-ment, or the remainder of the initial warranty period, whichever is longer.SOFTWARE: Actiontec Electronics warrants to Customer that each software pro-gram licensed from it will perform in substantial conformance to its program spec-ifications, for a period of ninety (90) days from the date of purchase from ActiontecElectronics or its authorized reseller. Actiontec Electronics warrants the media con-taining software against failure during the warranty period. The only updates thatwill be provided are at the sole discretion of Actiontec Electronics and will only beavailable for download at the Actiontec website, www.actiontec.com. ActiontecElectronics’ sole obligation under this express warranty shall be, at ActiontecElectronics’ option and expense, to refund the purchase price paid by Customer forany defective software product, or to replace any defective media with softwarewhich substantially conforms to applicable Actiontec Electronics published specifi-cations. Customer assumes responsibility for the selection of the appropriate appli-cations program and associated reference materials. Actiontec Electronics makes nowarranty or representation that its software products will meet Customer’s require-ments or work in combination with any hardware or applications software productsprovided by third parties, that the operation of the software products will be unin-terrupted or error free, or that all defects in the software products will be corrected.For any third-party products listed in the Actiontec Electronics software productdocumentation or specifications as being compatible, Actiontec Electronics willmake reasonable efforts to provide compatibility, except where the non-compatibil-ity is caused by a “bug” or defect in the third party’s product or from use of thesoftware product not in accordance with Actiontec Electronics published specifica-tions or User Guide.THIS ACTIONTEC ELECTRONICS PRODUCT MAY INCLUDE OR BEBUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH ISGOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THISACTIONTEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCHTHIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY,PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERN-ING THE USE OF SUCH SOFTWARE OBTAINING WARRANTY SER-VICE: Customer may contact Actiontec Electronics Technical Support Center with-in the applicable warranty period to obtain warranty service authorization. Datedproof of purchase from Actiontec Electronics or its authorized reseller may berequired. Products returned to Actiontec Electronics must be pre-authorized byActiontec Electronics with a Return Merchandise Authorization (RMA) numbermarked on the outside of the package, and sent prepaid and packaged appropriate-ly for safe shipment, and it is recommended that they be insured or sent by a methodthat provides for tracking of the package. The repaired or replaced item will beshipped to Customer, at Actiontec Electronics’ expense, not later than thirty (30) daysafter Actiontec Electronics receives the defective product. Return the product to: In the United StatesActiontec Electronics, Inc760 North Mary AvenueSunnyvale, CA 94085
Preliminary Page 2 • Access point User’s Guide © 2001- 2002 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a registered trademark of NETGEAR, INC. Windows is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. FCC REGULATORY STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, with can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by on or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that which the receiver is connected. • Consult the dealer or an experienced radio/TXV technician for help. Modifications made to the product, unless expressly approved by NETGEAR, INC., could void the user’s authority to operate the equipment. RF Exposure Requirements WARNING!! To ensure compliance with FCC RF exposure requirements, the antenna used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or radio transmitter. Installers and end-users must follow the installation instructions provided in this user guide. Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device.

Navigation menu