C MAX Asia CM9301V312013 BLUETOOTH 4.0 SINGLE MODE HCI MODULE User Manual

C-MAX Asia limited BLUETOOTH 4.0 SINGLE MODE HCI MODULE

a href="https://usermanual.wiki/C-MAX-Asia" itemprop="url"> C MAX Asia >

User Manual

CMM-9301-V3.1S Bluetooth 4.0 Single Mode HCI Module This Module is limited to OEM installation ONLY SPEC No. CMM-9301-V3.1S BLE HCI module Revision 3.3 State 2013-12-11 C-MAX printed 2013-12-13 Version English Page 1 of 9 C-MAX Description The CMM-9301-V3.1S module is a Bluetooth SIG qualified, miniaturised BLE controller module based on EM Microelectronic's low power fully integrated single-chip Bluetooth Low Energy (BLE) Controller EM9301. The module is highly optimized for Bluetooth 4.0 Single Mode (Bluetooth Low Energy) link application requiring ultra low power consumption and short time-to-market. It offers a plug and play solution for any BLE application up to the link layer, without any additional hardware nor RF layout. Built in with a folded-dipole PCB antenna, this small sized, low cost module provides an ideal solution to the new BLE technology. The EM9301 is designed to act as BLE master or slave according to the Bluetooth 4.0 specification. It can be controlled by any external microcontroller featuring BLE profile and applications, through the standard BT HCI interface. 1.1 Features o Bluetooth SIG qualified Controller Subsystem QDID: B020510 o Master and Slave BLE controller compliant to Bluetooth 4.0 specification o Embedded low-power physical layer, Link Layer with security engine, and a Host Controller Interface (HCI) o Low average current consumption o 1Mbps on-air data rate o Mini-sized (18.5mm x 14mm) o Integrated Battery Low Detection o Programmable RF output level (-18 to +3 dBm) for current consumption optimization. o No Tuning necessary o SPI interface as HCI transport layer to micro-controller
CMM-9301-V3.1S Bluetooth 4.0 Single Mode HCI Module SPEC No. CMM-9301-V3.1S BLE HCI module Revision 3.4 State 2013-12-13 C-MAX printed 2013-12-13 Version English Page 2 of 9 C-MAX 1.2 Module Dimension, Pin Assignment and Physical Layout External External Top view Top view (Shielded, (Shielded, with pin header) without pin header) Internal Internal Top view Bottom view Module Dimensions Module Layout Connection pin pitch = 1.27mm Module Thickness (excluding pin header connectors) = 2.4mm max Pin Number Pin Name Input/Output to module Pin Description 1 RST I Reset (controlled via FET by 100ms HI input pulse) / ON (LO) / OFF (HI) 2 GND GND Ground Connection 3 CS I Chip Select (Active LO) 4 IRQ O Interrupt Output for external host Controller 5 SDO O SPI Data Output 6 SDI I SPI Data Input 7 SCK I SPI Clock Input 8 VCC VCC Power Supply 9 SEL I Interface Selection (0 = UART, 1 = SPI)
Download:
Mirror Download [FCC.gov]
Document ID2157003
Application IDdKJwoT37z7o9Xd6nVFnNFw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize47.85kB (598076 bits)
Date Submitted2014-01-03 00:00:00
Date Available2014-01-03 00:00:00
Creation Date2013-12-13 11:30:12
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2013-12-13 11:30:12
Document TitleMicrosoft Word - CMM-9301-V3.1S User Manual-V3.4_20131213
Document CreatorPScript5.dll Version 5.2.2
Document Author: FRANKIE
FCC ID Filing: 2ABBXCM9301V312013

Navigation menu