C motech CDU-685A CDMA 1x/EvDo USB MODEM User Manual

C-motech Co., Ltd. CDMA 1x/EvDo USB MODEM Users Manual

Users Manual

Get Started EVDO Rev. A USB Modem CDU-685A www.cmotech.com
Table of Contents How to Use This Guide Section 1: Introducing the EVDO Rev.A USB Modem 1A. Introducing the Cox EVDO Rev.A USB Modem Cox EVDO Rev.A USB Modem System Requirements Package Contents Care and Maintenance Section 2: Installing and Using the USB Modem 2A. Installing the Software Installing the Software and Drivers 2B. Using Your USB Modem Launch Software Activating Your USB Modem Attaching the Y-Extension Cable Viewing the User Guide Removing the USB Modem Contacting Cox Customer Service Troubleshooting Section 3: Technical Specifications, Regulatory and Safety Information, and Warranty 3A. Technical Specifications Radio Frequency and Electrical Specifications Software Specifications Environmental Specifications Mechanical Specifications LED Operation 3B. Regulatory Information Trademarks &Copyright 3C. Important Safety Information Important Notice Safety and Hazards\ 3D. Warranty Manufacturer's Limited One-Year Warranty
How to Use This Guide The advantages of Cox are as clear as each wireless connection you make. With Cox service, we give you what you really want from a wireless service provider—clear connections, easy-to-understand service plans, and self-servicing options for managing your account. All this is designed to make your life easier and worry-free. We know you’re eager to start using your USB Modem CDU-685A right away, and the sections of this guide are designed to help you do just that. The first section gives an overview of the USB Modem CDU-685A package contents. The second section guides you through the steps required to install your USB Modem CDU-685A and the Windows drivers and software, describes how to start the software once it is installed, and explains how to use the Y-extension cable with your device. The third section lists the technical specifications, regulatory and important safety information, and warranty information for your USB Modem CDU-685A. Getting More Information About Your Device and Service This guide describes how to install and start the software. To learn how to use all the features of your USB Modem CDU-685A and software, consult the user guide (see page 10 of this document) or online help.
Section 1 : Introducing the EVDO Rev.A USB Modem 
Section 1A : Introducing the Cox EVDO Rev.A USB Modem This section introduces your USB Modem CDU-685A, and describes what is included with your device. The USB Modem CDU-685A is a wireless USB modem. Using this device, and subject to network availability, you can: • Easily activate your account • Connect to the Internet and to VPN and corporate networks • Send and receive large email messages • Download media content (music, videos and real-time and streaming media) • Play games online System Requirements This Cox Mobile Broadband USB modem is supported on: • Windows Vista. • Windows XP with Service Pack 2 or later. • Windows 2000 with Service Pack 4 or later. • Windows 7 To install and run the USB modem and the accompanying Cox Connection Manager SM software, you will need: a free USB slot. • a minimum of 256 MB of memory using Windows 2000 and Windows XP. • a minimum of 1 GB of memory using Windows Vista. • a minimum of 70 MB of free space on your hard drive. • a minimum processor speed of 300 MHz for Windows 2000 and Windows XP. • a minimum processor speed of 800 MHz for Windows Vista. *Note : You can connect your device to any computer (desktop or laptop) with a USB slot. Package Contents USB Modem CDU-685A package contains the following components: • Cox EVDO Rev.A USB Modem CDU-685A • USB extension cable • Get Started guide • Installation CD
Care and Maintenance As with any electronic device, USB modem must be handled with care to ensure reliable operation. Follow these guidelines in using and storing the USB modem: • The USB modem should fit easily into an available USB slot. Forcing the device into a slot may damage the connector pins. • Protect your USB modem from excessive moisture and heat, and from prolonged exposure to the sun. • When it is not connected to your computer, store your USB modem in the pouch that came with the modem to avoid dust. • Remove your USB modem before storing or transporting your computer. • When inserting or removing your USB modem, always grip from the sides rather than the end, as this prevents damage to the USB modem. • Do not use your USB modem while driving a vehicle, as it may distract you from properly operating the vehicle. • Dispose of your USB modem in accordance with EPA guidelines. For more information, visit www.epa.gov/epawaste/partnerships/plugin/cellphone/index.htm.
Section 2 : Installing and Using the USB Modem
Section 2A : Installing the Software Installing the Software and Drivers 1. Insert the installation CD into your CD-ROM drive. The CD should launch automatically. Click Setup to continue. (If autoplay is disabled, navigate to your CD-ROM drive in Explorer and click setup.exe.) 2. In the “Welcome to the InstallShield Wizard” installation window, click Next. 3. Read the License Agreement and select “I accept the terms in the License Agreement” to agree to the terms. Click Next.
4. Select a skin (“New” or “Classic”) and click Next. 5. In the “Destination Folder” window, click Next to accept the default installation folder (recommended); or click Change, specify a different installation folder, and then click Next to continue. 6. Click Install to begin installation. 7. When the “InstallShield Wizard Completed” window appears, click Finish. 8. If a message that you must restart your computer is displayed, click Yes to restart your computer. Wait until your computer restarts. 9. Proceed to Activating Your USB Modem. Section 2B : Using Your USB Modem Launch Software Activating Your USB Modem Viewing the User Guide Removing the USB Modem Contacting Cox Customer Service Troubleshooting Activating Your USB Modem If your USB modem has not been preactivated or you have not activated it at the time of purchase, you must activate your account and configure the USB modem to use your account. (Normally, your device will automatically complete the activation process the first time you use it.) 1. Gripping both sides of the USB modem, insert it into your computer’s USB port. Windows detects the USB modem and installs the drivers for it. This may take a few minutes. Once completed, the system tray may display “Your devices are ready to use” or “Your new hardware is installed and ready to use.” 2. Launch Connection Manager by double-clicking the program’s icon. 3. Hands Free activation starts automatically and will be displayed on the Cox. After the activation successfully completes, it will automatically connect and welcome you to the Cox Network. 4. If activation was not successful, a message window is displayed. For instructions on activating your USB modem, see the user guide (see “Viewing the User Guide”). Use the spaces below to write down important information related to the activation process and your account.
ESN/MEID______________________________________ Activation code__________________________________ Cox Phone number____________________________ MSID__________________________________________ Account password_______________________________ Cox User Name________________________________ Viewing the User Guide The user guide provides detailed information on the Cox Connection Manager software.  On your computer, select Start > All Programs > Cox > Connection Manager > Users Guide.  On your computer, select Start > My Computer. Right click on CD/DVD RW Drive and select EXPLORE > UserGuide. Removing the USB Modem 1. Disconnect from the Cox Connection Manager software if it is running. 2. Remove the USB modem from your computer’s USB slot by gripping both sides of the USB modem and pulling straight out. Troubleshooting 1. For a more complete listing of errors and possible solutions, please see the user guide or online Help. You may also call Cox Customer Service. 2. Ensure that the Connection Manager software has been successfully installed on your computer. 3. Ensure that your USB modem has been activated. 4. Ensure that the USB modem is fully plugged into the USB slot. 5. Ensure that the LED light is on; otherwise connect and then reconnect the USB modem. 
Section 3 : Technical Specifications, Regulatory and Safety Information, and Warranty
Section 3A : Technical Specifications Radio Frequency and Electrical Specifications Frequencies CDMA 800/AWS/1900 MHz Interface Type High-Speed USB 2.0 compliant Common air interface CDMA Antenna Diversity Support Receive Diversity DC input operating voltage +5VDC from USB host port Maximum current @+5VDC Under 500mA RF Frequencies BC0 TX frequency: 824MHz – 849MHz RX frequency: 869MHz – 894MHz BC1 TX frequency: 1850MHz – 1910MHz RX frequency: 1930MHz – 1990MHz AWS TX frequency: 1710MHz – 1755MHz RX frequency: 2110MHz – 2155MHz Software Specifications OS Support Windows® 2000, XP, Vista and Windows 7 Environmental Specifications Operating conditions -20°C ~ +55°C , 85%(at 50(°C)), relative humidity (non-condensing) Storage Temperature -35°C ~ +75°C Humidity 95%, non-condensing Mechanical Specifications Dimensions 32.1mm * 72.1mm * 11.9mm Weight Approx. 23g Form Factor USB Series “A” Type plug Housing Material CASE – PC
Section 3B Regulatory Information This device is compliant with Parts 15, 22, 24, and 27 of the FCC Rules. Operation of this device is subject to the following two conditions: 1. This device may cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesirable operation. FCC guidelines stipulate that the antenna should be 1.5 cm (0.6") or more from user during operation. FCC ID: TARCDU-685A CAUTION Unauthorized modifications or changes not expressly approved by manufacturer could void compliance with regulatory rules and thereby your authority to use this equipment. WARNING (EMI) – United States FCC Information This equipment has been tested and found to comply with the limits pursuant to Parts 15, 22, 24, and 27 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an appropriate installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Body worn operation SAR compliance has been established in the laptop computer(s) with Horizontal and Vertical slot configurations, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. The antenna(s) used for this USB dongle must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device Trademarks Cox and the logo are trademarks of Cox. Other marks are the property of their respective owners. Windows® is a registered trademark of Microsoft Corporation. Copyright ©2009 Cox. Cox and the logo are trademarks of Cox. Other marks are the property of their respective owners.
Section 3C: Important Safety Information Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors), or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Cox EVDO Rev.A USB Modem CDU-685A are used in a normal manner with a well-constructed network, they should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Manufacturer accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Cox EVDO Rev.A USB Modem CDU-685A, or for failure of Cox EVDO Rev.A USB Modem CDU-685A to transmit or receive such data. Safety and Hazards Do not operate modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Cox EVDO Rev.A USB Modem CDU-685A must be removed from your computer. It can transmit signals that could interfere with this equipment. Do not operate the Cox EVDO Rev.A USB Modem CDU-685A in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Cox EVDO Rev.A USB Modem CDU-685A must be removed from your computer. When operating, it can transmit signals that could interfere with various onboard systems. The driver or operator of any vehicle should not operate the Cox EVDO Rev.A USB Modem CDU-685A while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some jurisdictions, operating such communication devices while in control of a vehicle is an offense. Section 3D : Warranty Manufacturer’s Limited One-Year Warranty The company warrants to original retail purchaser of this device, that should product during normal consumer usage conditions, be proven defective in material or any part thereof, during normal consumer usage conditions, be defective in material or workmanship that results in product failure within the first twelve (12) month period from the date of purchase, such defects will be repaired or replaced (with new or refurbished) product at the Company’s discretion, without charge for parts and labor directly related to the defect(s). This warranty extends to consumers who purchase the product in the United States or Canada and it’s not transferable or assignable. This warranty does not apply to: (a) Product subject to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage; (b) Products whose mechanical serial number or electronic serial number has been removed, altered, or defaced; (c) Damage from exposure to moisture, humidity, excessive temperature or extreme environment conditions; (d) Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the company;
(e) Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts; (f) Product damaged from external causes such as fire, flooding, dirt, sand, weather conditions, battery leakage, blown fuse, theft or improper usage of any electrical source. The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole. When sending your wireless device to authorized distributors for repair or service, please note that any personal data or software stored on the device may be inadvertently erased or altered. Therefore, we strongly recommend you make a back up copy of all data and software contained on your device before submitting it for repair or service. This includes all contact lists, downloads (i.e. third-party software applications, games and graphics) and any other data added to your device. Manufacturer is not responsible for and does not guarantee restoration of any third-party software, personal information or memory data contained in, stored on, or integrated with any wireless device, whether under warranty or not, returned to manufacturer’s authorized distributors for repair or service. To obtain repairs or replacement within the terms of this Warranty, the product should be delivered with proof of Warranty coverage (e.g. dated bill of sale), the consumer’s return address, and daytime phone number and/or fax number and complete description of the problem, transportation prepaid, to the Company at the address shown below or to the place of purchase for repair or replacement processing. The extent of the company’s liability under this warranty is limited to the repair or replacement provided above and, in no event, shall the company’s liability exceed the purchase price paid by purchaser for the product. Any implied warranties, including any implied warranty of merchant ability or fitness for a particular purpose, shall be limited to the duration of this written warranty. Any action for breach of any warranty must be brought within a period of 18 months from date of original purchase in no case shall the company be liable for a special consequential or incidental damages for breach of this or any other warranty, express or implied, whatsoever. The company shall not be liable for the delay in pending service under this warranty or loss of use during the time the product is being repaired or replaced. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states or provinces do not allow limitations on how long an implied warranty lasts on the exclusion or limitation of incidental or consequential damage so the above limitation or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.

Navigation menu