CAD Audio TX4010 Wireless Microphone User Manual

CAD Audio, LLC Wireless Microphone

a href="https://usermanual.wiki/CAD-Audio" itemprop="url"> CAD Audio >

User manual

CAD Audio6573 Cochran Rd., Bldg.I Solon, OH 44139 U.S.A.Tel: (440) 349-4900 Fax: (440) 248-4904Sales: 800-762-9266 www.cadaudio.com©2017 CAD Audio Part No. 62267-83- 00 Jan20174000 SeriesDigital Wireless Microphone SystemManual andQuick Start-up GuideTwo-Year Limited WarrantyCAD Audio hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs CAD Audio will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.This warranty excludes exterior nish or appearance, damage from abuse, misuse of the product, use contrary to CAD Audio’s instructions or unauthorized repair. All implied warranties, merchantability, or tness for a particular purpose is hereby disclaimed and CAD Audio hereby disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product.This warranty gives you specic legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.Note: No other warranty, written or oral is authorized by CAD Audio.Individuals with cardiac pacemakers and other similar medical devices should consult with their physician before using any RF devices. Though the output level of this wireless system is below 50 milliwatts, the proximity of the transmitter to the implant device could pose a threat.As with any wireless product, environmental conditions can reduce or in some cases prohibit a successful connection between the transmitter and the receiver. This device complies with Part 15 of the FCC Rules. Most users of CAD Audio wireless products in the United States do not need a license for operation. However, the rules for unlicensed operation state that this device must not cause harmful interference, and must accept any interference received, including interference that may cause undesired operation. Wireless products meeting CAD factory standards adhere to these rules. The FCC reserves the right to change these rules at any time. For more information contact the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at:www.fcc.gov/cgb/wirelessmicrophones This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The CADLiveTM 4000 Series includes the following features: • True Diversity to minimize multipath interference • Frequency agile operation for maximum frequency plan exibility • ScanLink™ technology for instantaneous and automatic channel conguration • CADTone™ Body Pack input – Optimized Impedance interface - Hi-Z for Guitar and Lo-Z for mic • Metal construction Handheld Transmitter equipped with CADLive™D90 capsule • High Contrast LCD displays on TX and RX • Transmitters feature 1mW power adjustment to aid in multiple system applications • Dynamic Range > 115dB • AA Batteries with up to 15 Hrs of battery life • Systems ship with rack ears single/dual BNC relocation kit and durable carry case • BodyPack systems include miniature E19 Earworn, E29 Lav, WXGTR guitar cable • XLR and ¼" outputs on receiver61Startup Guide1. Install new high quality alkaline batteries into transmitter, observing proper polarity.2. Power up receiver by holding power button for one second.3. Hold the SET button for one second to unlock the receiver menu.4. Hold the SCAN button for one second to activate the ScanLinkTM environmental frequency analysis, which automatically selects a clear operating frequency.5. Turn on the transmitter by holding the power button for one second.6. Open the battery compartment to reveal the IR node.7. Press the LINK button (note the IR node will illuminate). Align the two IR nodes (transmitter and receiver) at a distance of 4"-12" (ambient room light can affect distance) for a few seconds while the receiver updates the transmitter. Your system is now ScanLink'd.Accessing Advanced Features (SET button)All advanced features are accessed by holding the “SET” button for one second to unlock the menu. Press the “SET” button to advance through menu items. Menu items may be adjusted using arrow keys.1. Manually Select Frequencies GR (frequency group) CH (channel)2. Receiver Squelch Level SQL (used to reduce sensitivity to competing RF by sacricing operating distance)3. Transmitter Power TX SET RF (higher power increases operating distance, lower power improves simultaneous usage)4. Transmitter audio gain TX SET GAIN (lower gain may be used as needed for louder performers)5. Receiver Output Volume VOL (may be reduced if audio signal overloads mixer)DA4090 DISTRIBUTION AMPLIFIERLINKSETSCANIRScanLinkLINKSETSCANIRScanLinkLINKSETSCANIRScanLinkLINKSETSCANIRScanLinkUsing the DA4090 Distribution Amplier to Simplify Multiple-System Installations 1. BNC 50 ohm cable. 2. Power cable. 3. Power adapter.
Download:
Mirror Download [FCC.gov]
Document ID3367370
Application ID9v/zCrGvoW12o4D16AssIQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize136.89kB (1711081 bits)
Date Submitted2017-04-23 00:00:00
Date Available2017-04-23 00:00:00
Creation Date2017-01-16 17:50:37
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2017-04-21 23:13:25
Document TitleUser manual
Document CreatorAdobe InDesign CC 2017 (Macintosh)
FCC ID Filing: OQ5TX4010

Navigation menu