CAD Audio TX4010 Wireless Microphone User Manual
CAD Audio, LLC Wireless Microphone
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3367370 |
| Application ID | 9v/zCrGvoW12o4D16AssIQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 136.89kB (1711081 bits) |
| Date Submitted | 2017-04-23 00:00:00 |
| Date Available | 2017-04-23 00:00:00 |
| Creation Date | 2017-01-16 17:50:37 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-04-21 23:13:25 |
| Document Title | User manual |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
Two-Year Limited Warranty CAD Audio hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs CAD Audio will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim. This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to CAD Audio’s instructions or unauthorized repair. All implied warranties, merchantability, or fitness for a particular purpose is hereby disclaimed and CAD Audio hereby disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product. This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you. Note: No other warranty, written or oral is authorized by CAD Audio. Individuals with cardiac pacemakers and other similar medical devices should consult with their physician before using any RF devices. Though the output level of this wireless system is below 50 milliwatts, the proximity of the transmitter to the implant device could pose a threat. As with any wireless product, environmental conditions can reduce or in some cases prohibit a successful connection between the transmitter and the receiver. This device complies with Part 15 of the FCC Rules. Most users of CAD Audio wireless products in the United States do not need a license for operation. However, the rules for unlicensed operation state that this device must not cause harmful interference, and must accept any interference received, including interference that may cause undesired operation. Wireless products meeting CAD factory standards adhere to these rules. The FCC reserves the right to change these rules at any time. For more information contact the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAD Audio 6573 Cochran Rd., Bldg.I Solon, OH 44139 U.S.A. Tel: (440) 349-4900 Fax: (440) 248-4904 Sales: 800-762-9266 www.cadaudio.com ©2017 CAD Audio Part No. 62267-83-00 Jan2017 4000 Series Digital Wireless Microphone System Manual and Quick Start-up Guide The CADLiveTM 4000 Series includes the following features: • True Diversity to minimize multipath interference • Frequency agile operation for maximum frequency plan flexibility • ScanLink™ technology for instantaneous and automatic channel configuration • CADTone™ Body Pack input – Optimized Impedance interface Hi-Z for Guitar and Lo-Z for mic • Metal construction Handheld Transmitter equipped with CADLive™ D90 capsule • High Contrast LCD displays on TX and RX • Transmitters feature 1mW power adjustment to aid in multiple system applications • Dynamic Range > 115dB • AA Batteries with up to 15 Hrs of battery life • Systems ship with rack ears single/dual BNC relocation kit and durable carry case • BodyPack systems include miniature E19 Earworn, E29 Lav, WXGTR guitar cable • XLR and ¼" outputs on receiver Using the DA4090 Distribution Amplifier to Simplify Multiple-System Installations 1. BNC 50 ohm cable. 2. Power cable. 3. Power adapter. DA4090 DISTRIBUTION AMPLIFIER IR ScanLink IR ScanLink SET Startup Guide 1. Install new high quality alkaline batteries into transmitter, observing proper polarity. 2. Power up receiver by holding power button for one second. 3. Hold the SET button for one second to unlock the receiver menu. 4. Hold the SCAN button for one second to activate the ScanLinkTM environmental frequency analysis, which automatically selects a clear operating frequency. 5. Turn on the transmitter by holding the power button for one second. 6. Open the battery compartment to reveal the IR node. 7. Press the LINK button (note the IR node will illuminate). Align the two IR nodes (transmitter and receiver) at a distance of 4"-12" (ambient room light can affect distance) for a few seconds while the receiver updates the transmitter. Your system is now ScanLink'd. LINK SCAN IR ScanLink SET LINK IR ScanLink SET LINK SCAN SCAN SET LINK SCAN Accessing Advanced Features (SET button) All advanced features are accessed by holding the “SET” button for one second to unlock the menu. Press the “SET” button to advance through menu items. Menu items may be adjusted using arrow keys. 1. Manually Select Frequencies GR (frequency group) CH (channel) 2. Receiver Squelch Level SQL (used to reduce sensitivity to competing RF by sacrificing operating distance) 3. Transmitter Power TX SET RF (higher power increases operating distance, lower power improves simultaneous usage) 4. Transmitter audio gain TX SET GAIN (lower gain may be used as needed for louder performers) 5. Receiver Output Volume VOL (may be reduced if audio signal overloads mixer) Receiver RX4000 (Front) Handheld TX4000 Transmitter 1. CADLive D90 supercardioid dynamic capsule. 1. 2. 3. 4. 5. 6. 2. Enclosed transmitting antenna. 3. Power/Mute button. Hold for power, press for mute. 4. High-contrast display a) Operating frequency b) RF power indicator c) Transmitter audio gain indicator d) Mute indicator e) Battery strength indicator Power button. IR ScanLink node. Use for linking transmitter and receiver. LINK button. Use to initiate TX-RX link. SET button. Unlocks advanced features. SCAN button. Use to initiate environmental frequency analysis. UP and DOWN buttons. Use to adjust advanced feature menu items. 5. SET button. Unlocks advanced features. 6. SELECT button. Use to adjust advanced feature menu items. 7. IR node for Scan-LinkTM 8. Battery compartment. Use only high quality AA alkaline batteries. Observe polarity. 7. High-Contrast display. a) Multi-segment RF signal strength meter. b) Multi-segment AF signal level meter. c) ANT.A/ANT.B diversity indicator. d) IR indicates active IR communication. e) SQL squelch level indicator. f) GR CH group and channel indicator. g) Operating Frequency. h) TX SET RF indicates transmitter RF power setting. i) TX SET GAIN indicates transmitter audio gain setting. 7 8 other side Receiver RX4000 (Rear) 1. 2. 3. 4. Bodypack TX4010 Transmitter DC power input jack. 12-18VDC, 300mA min, center positive. XLRM-type low-impedance balanced audio output. 1/4" [6.35mm] high-level unbalanced ouput BNC 50 ohm antenna inputs. Specifications 4000 Series Frequency Range......................................................... T Band 903.55 - 927.65 MHz Frequency Response..................................................................40Hz - 15kHz Dynamic Range....................................................................................>115dB Battery Life .................................................................................Up to 15 Hrs Dimensions ....................................................... 17" [43.2cm] x 12" [30.5cm] x 4" [10.2cm] Weight.......................................................................................... 5lbs [2.3kg] 1. Transmitting antenna 2. Power indicator 3. Power/Mute button: hold for power, press for mute. 4. CADTone TB4M-type audio input connector. 5. High-contrast display a) Operating frequency b) RF power indicator c) Transmitter audio gain indicator d) Mute indicator e) Battery strength indicator 6. SET button. Unlocks advanced features. 7. IR node for ScanLink 8. SELECT button. Use to adjust advanced feature menu items. 9. Battery compartment. Use only high quality AA alkaline batteries observing proper polarity. These frequencies have been approved for use within the United States and Canada as of the date of publication of this manual. It is the user’s responsibility to comply with local regulations. 903.55 - 927.65 MHz Band T Group 1 906.550 908.300 910.500 913.900 919.050 922.700 925.050 Group 2 Group 3 903.550 904.050 904.800 907.550 906.250 910.300 909.800 912.900 914.400 915.850 915.350 918.000 923.200 920.050 926.650 923.700 Group 4 905.150 908.950 912.000 913.400 916.350 918.500 924.200 927.650 3k3 Channelization CH 2 3 Interfacing to CADTone TB4M-type input connector 3-wire type electret mic 2-wire type electret mic 3k3 3k3 10k Dynamic mic Instrument 3k3 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Create Date : 2017:01:16 17:50:37-05:00 Metadata Date : 2017:04:21 23:13:25+08:00 Modify Date : 2017:04:21 23:13:25+08:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:79a5b8ab-463f-4ecb-b335-28c7c74dd0fc Original Document ID : xmp.did:028011740720681195FEF0546C2EE8E3 Document ID : xmp.id:805d71cf-c9de-432e-a40b-9dd1c76d42e3 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3c424e34-5f40-4615-9f3b-ecf73559a77c Derived From Document ID : xmp.did:4388082c-c4bc-428d-9c2e-caad0678d5a6 Derived From Original Document ID: xmp.did:028011740720681195FEF0546C2EE8E3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:01:16 17:50:37-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 5 Language : en-US Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools