CC and C Technologies BT378 Digital Bluetooth Music Receiver User Manual Product Specification

Download:
Mirror Download [FCC.gov]
Document ID	1874123
Application ID	5+atB5z6XG1mejJHDgPTeQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.43kB (142921 bits)
Date Submitted	2013-01-04 00:00:00
Date Available	2013-01-04 00:00:00
Creation Date	2012-12-06 17:32:38
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-12-24 17:43:04
Document Title	Product Specification
Document Creator	Acrobat PDFMaker 7.0.7 for Word

IEEE 802.11b/g/n
NFC Bluetooth Music Receiver
BT-378
User Manual
VERSION 1.0
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
This manual may not be copied in any media or form without the written consent of original maker.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District ,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Overview
BT‐378 is a class 2 NFC Bluetooth Music Receiver that allows a music player, such as
iPhoneTM, AndroidTM smart phone, or MP3 player to stream music to an external
Speaker wirelessly.
Designed with the CSR BC05 chip solution, it has 3.5” audio jack for external speakers.
Moreover, it is equipped with an NFC tag that enables smart phone with NFC to
retrieve BT‐378 BT address and device name to further simplify user experience.
In case of Android 4.1 smart phone with NFC, you tap the phone to BT‐378 for
auto‐pairing.
An LED indicator for link/pairing is also provided.
Features
„
„
„
„
„
„
„
Fully compliant with Bluetooth v2.1+EDR
Support Bluetooth A/V profile (AADP)
Support NFC Forum Type 2 Tag
2.4~2.4835GHz ISM band
Class 2 RF output, up to 10 meters of coverage area
LED indicator for power and Bluetooth status
Support 3.5” audio jack for analog Speaker
Set Up
1. Connect the BT‐378 to an audio input on your home music system.
2. Connect the AC power adapter cable to BT‐378 power jack, and plug the AC adapter
into a wall power outlet.
3. The blue LED light will flash once to indicate the unit is powered and is now ready to
be paired to your Bluetooth smart device.
For NFC ‐enabled smart devices running
Android™ 4.1 or later
The NFC auto‐connect feature is already configured within your smart device, so all you
have to do is to tap the phone to BT‐378 to connect it.
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District ,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
For non‐NFC ‐enabled smart devices
1. Go to “settings” and make sure Bluetooth is turned on.
2. Follow your device’s normal Bluetooth connection process by searching for devices;
once you have found the Bluetooth device labeled NFC BT, you should connect to it.
3. Now any music or audio you play will play through your music system.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth feature on your mobile device, BT‐378
will disconnect from your device. To reconnect, simply access the Bluetooth Manager on
your device and select the appropriate device listed.
Changing Connected Device
If you want to switch from one device to another, follow these steps:
1. End the existing Bluetooth connection with the connected device by either
disconnecting within your “settings” or turning off Bluetooth.
2. BT‐378 can now be connected to a different smart mobile device.
3. Follow the directions in “Pairing Your Bluetooth Music Receiver” to connect a
different device.
Out of Range or Lost Signal
If the music device is out of range (beyond 30 feet) of BT‐378 or if there is something
blocking the Bluetooth signal, the LED light will turn off to indicate that the Bluetooth
connection with the music device has been lost. To avoid a lost connection, move the
music device back into range (within 30 feet), or reduce obstructions between the
receiver and your smart device. Within 15 seconds, the connection will automatically be
reestablished and the blue LED light will turn on. If the connection is lost for more than
15 seconds, the connection will need to be reestablished. Follow the directions in
“Reconnecting Your Device.”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Source Modified                 : D:20121206093233
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2012:12:24 17:43:04+08:00
Create Date                     : 2012:12:06 17:32:38+08:00
Metadata Date                   : 2012:12:24 17:43:04+08:00
Document ID                     : uuid:1b01d523-d8b3-46c4-bc9b-3434e63056fd
Instance ID                     : uuid:8ab590b4-7ffa-4d91-bbce-b02ab2ca7695
Version ID                      : 8
Format                          : application/pdf
Title                           : Product Specification
Creator                         : 
Subject                         : 
Headline                        : 
Has XFA                         : No
Page Count                      : 4
Page Layout                     : OneColumn
Author                          : 

EXIF Metadata provided by EXIF.tools