CC and C Technologies CM8821CU ac1x1+BT module User Manual Product Specifications
CC&C; Technologies, Inc. ac1x1+BT module Product Specifications
15_CM-8821CU UserMan r1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3949619 |
| Application ID | asI5gidInyeKq7EOwCND6Q== |
| Document Description | 15_CM-8821CU UserMan r1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 73.38kB (917257 bits) |
| Date Submitted | 2018-08-03 00:00:00 |
| Date Available | 2018-08-03 00:00:00 |
| Creation Date | 2018-07-30 17:08:01 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2018-07-31 15:19:19 |
| Document Title | Product Specifications |
| Document Creator | Acrobat PDFMaker 7.0.7 for Word |
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Product Specifications CM-8821CU ac1x1+BT Module Version: 2.0 Manufacturer CC&C Technologies, Inc. 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Revision History Version Date Change Description 1.0 03/08, 2017 Initial release 2.0 07/5, 2017 Modify pin outs define 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Overview CM-8821CU is a WLAN 11ac and Bluetooth combo Module, provides a single USB interface to host, which fully supports the features and functional compliance of IEEE 802.11b/g/n/a/ac standards. Bluetooth v2.1, v3.0 and v4.2 standards. It supports up to 433Mbps high-speed WLAN network connections and Bluetooth protocol stack. CM-8821CU Bluetooth controller complies with Bluetooth core specification v4.2 and supports dual mode(BR/EDR+AMP+low Energy Controllers). It is backward compatible with previous versions including v2.1+EDR and v3.0+HS. Both BR/EDR and LE can operate simultaneously. CM-8821CU provides a complete solution for a high throughput performance integrated wireless LAN and Bluetooth module, and is targeted at competitive superior performance, better power management applications. Features 802.11ac solution for 5G band Support 802.11ac 1x1 Complies with USB Specification Revision 2.0 Operate at ISM frequency bands (2.4GHz and 5GHz) IEEE standards support: IEEE 802.11b/ g/ n/ a/ ac/ 5MHz / 10MHz / 20MHz / 40MHz / 80MHz bandwidth transmission OFDM with BPSK, QPSK, 16QAM, 64QAM and 256QAM modulation. Convolutional Coding Rate: 1/2, 2/3, 3/4, and 5/6 Maximum PHY data rate up to 72.2 Mbps using 20MHz bandwidth, 150Mbps using 40MHz bandwidth, and 433Mbps using 80MHz bandwidth Backward compatible with 802.11a/b/g devices while operating at 802.11n data rate Supports WPA, WPA2 Compatible with Bluetooth v2.1+EDR Support Bluetooth v4.2 system Support Low Power Mode(Sniff/Sniff Sub-rating) Enhanced BT/WIFI Coexistence Control to improve transmission quality in different profiles Bluetooth v4.0 Dual Mode support: Simultaneous LE and BR/EDR Supports multiple Low Energy states RoHS compliance Low Halogen compliance 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Factory options DC power input 3.3V or 5V RF output by RF connector(type-1), RF output on half-hole(type-2) RF type-1 RF type-2 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 General Specification Model Name CM-8821CU Product Name ac1x1+BT Module Standard IEEE 802.11b/g/n/a/ac/ e/ h/ i/ Bluetooth v2.1+EDR/ v3.0/ v3.0+HS/ v4.2/ Data Transfer Rate WLAN: 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS0 to 7 for HT20MHz, MCS0 to 7 for HT40MHz 802.11ac: MCS0 to 8 for HT20MHz, MCS0 to 9 for HT40MHz, NSS1 MCS0 to 9 for VHT80MH Bluetooth: Basic rate: 1Mbps Enhanced data rate: 2, 3 Mbps High Speed: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Modulation Method Frequency Band WLAN: CCK, DQPSK, DBPSK, BPSK, QPSK,16QAM, 64QAM, 256QAM Bluetooth: 8DPSK, π/4 DQPSK, GFSKFSK 2.4GHz and 5GHz ISM Band IEEE 802.11b: CCK (Complementary Code Keying) Spread Spectrum IEEE 802.11g/n/a/ac:OFDM (Orthogonal Frequency Division Multiplexing) Bluetooth: FHSS (Frequency Hopping Spread Spectrum) Receiver Sensitivity WLAN: -80dBm – 802.11b@11Mbps -71dBm – 802.11g@54MBps -67dBm – 802.11n@MCS7_BW20 -64dBm – 802.11n@MCS7_BW40 -57dBm – 802.11ac@NSS1_MCS9_BW20 -54dBm – 802.11ac@NSS1_MCS9_BW40 -51dBm – 802.11ac@NSS1_MCS9_BW80 Bluetooth: -89dBm@1Mbps -90dBm@2Mbps -83dBm@3Mbps Antenna IPEX Antenna x 1 Security WPA, WPA2 Operating Temperature Storage Temperature Humidity Size 0 – 50° C ambient temperature -10 ~ 70°C ambient temperature 5 to 90 % maximum (non-condensing) 25 x 12 mm (L x W) 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 DC power input:(factory option) Module Minimum Typical Maximum Unit DC 5V module 4.75 5.25 DC 3.3V module 3.135 3.3 3.465 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Pin outs define: Pin Signal Input /Output Description BT_LED Output BT LED Pin(Active Low) VDD Power 3.3V or 5V by factory option HSDM I/O High-Speed USB D- Signal HSDP I/O High-Speed USB D+ Signal GND WL_LED GND RFIO_OUT GND 10 BT_WAKE_HOST 11 GPIO2 12 CHIP_EN 13 GPIO1 I/O RF Output I/O Input I/O 14 BT_DIS Input 15 GPIO8 I/O 16 HOST_WAKE_BT Input 17 WL_DIS Input Ground WLAN LED Pin(Active Low), General Purpose Input/ Output Pin Ground WLAN(2.4G/5G)/BT RF port (if don’t using IPEX connector) Ground Signal from module to wake up host,refer driver source code for details. General Purpose Input/ Output Pin This Pin Can externally shut down the RTL8821CU-CG(No Extra Power Switch Required). General Purpose Input/ Output Pin Shared with GPIO11. This pin can externally shut down the RTL8821CU-CG BT function when BT_DIS is pulled Low. When this pin is pulled low. USB interface will be also disabled. This pin can be also defined as the BT Radio-off function with host interface remaining connected WLAN LED Pin(Active Low), shared with GPIO8 General Purpose Input/ Output Pin Signal from host to wake up module,refer driver source code for details. Shared with GPIO9. This pin can externally shut down the 晶訊科技股份有限公司 CC&C Technologies, Inc. 18 HOST_WAKE_WL Input 19 WL_WAKE_HOST Output 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 RTL8821CU-CG WLAN function when WL_DIS is pulled Low. When this pin is pulled low. USB interface will be also disabled. This pin can also be configured as the WLAN Radio-off function with host interface remaining connected Signal from host to wake up module,refer driver source code for details. Signal from module to wake up host,refer driver source code for details. The external circuits for WiFi and BT activity LED display 晶訊科技股份有限公司 CC&C Technologies, Inc. Block Diagram 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Dimension Subject to change without notice 10 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 PCB Layout footprint The recommended layout pads for CM-8821CU module are shown below. (Module top view) All dimensions are in millimeters. Tolerance: +- 0.05mm 11 晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Reference Temperature Reflow Chart This module is surface mount device; please refer below conditions for drying before solder reflow processes. (extracted from IPC/JEDEC J-STD-033B.1) Bake @ 125 oC Exceeding Exceeding floor Life floor Life By > 72h By ≤ 72h 9 hours 7 hours Bake @ 90 oC Exceeding Exceeding floor Life floor Life By > 72h By ≤ 72h 33 hours 23 hours 12 Bake @ 40 oC Exceeding Exceeding floor Life floor Life By > 72h By ≤ 72h 13 days 9 days (OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.g. Verification) for the new host device per definition in §15.101. Integrator is reminded to assure that these installation instructions will not be made available to the end user of the final host device. - Module isintegrated" hasto be labelled The final host device, into which this RF with an auxilliary lable stating the FCC IDofthe RF Module, such as "Contains FCC ID: PANCM8821CU "This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)this devicemay not cause harmful interference, and (2)this devicemust accept any interference received, including interference thatmay cause undesired operation." NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Module statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. 1) The radio elements have the radio frequency circuitry shielded. 2) The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. 3) The module contains power supply regulation on the module. 4) The module contains a permanently attached antenna. 5) The module demonstrates compliance in a stand-alone configuration. 6) The module is labeled with its permanently affixed FCC ID label 7) The module complies with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. 8) The module complies with RF exposure requirements. This transmitter/module must not be collocated or operating in conjunction with any other antenna or transmitter. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/ mobile exposure conditions. The min separation distance is 20cm.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Create Date : 2018:07:30 17:08:01+08:00 Modify Date : 2018:07:31 15:19:19+08:00 Source Modified : D:20180730075206 Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : Acrobat PDFMaker 7.0.7 for Word Metadata Date : 2018:07:31 15:19:19+08:00 Document ID : uuid:267be04a-671c-4730-a90d-2646b1a2e81f Instance ID : uuid:6e666379-3e6a-44db-9e4f-95ffdf3dfe95 Version ID : 1 Format : application/pdf Title : Product Specifications Creator : Subject : Headline : Page Layout : OneColumn Page Count : 14EXIF Metadata provided by EXIF.tools