CC and C Technologies WM294V2 WLAN 11n USB Module User Manual WM 294 V2 module V1 2

Download:
Mirror Download [FCC.gov]
Document ID	3423058
Application ID	U+edNoEH9sGvtVnOgSCl8g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.87kB (885907 bits)
Date Submitted	2017-06-12 00:00:00
Date Available	2017-06-12 00:00:00
Creation Date	2017-10-22 20:58:41
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 20:58:41
Document Title	WM-294-V2_module-V1.2
Document Creator	PDFCreator Version 0.9.5
Document Author:	kevin_wu

晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
User's Manual
WM-294-V2
WLAN 11n USB module (1T1R)
Version: 1.2
Manufacturer
Version 1.2
CC&C Technologies, Inc.
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Revision History
Version
1.0
1.1
1.2
Version 1.2
Issue date
Mar. 02, 2015
Oct. 05, 2016
Nov. 01, 2016
Reason for revision
First edition
Modify Features
Remove PDN Function
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Overview
(& )
#"
#"
" !* "
#$$$ %&
! ,
, "
"",
! !
!" "
! ' #"
!+
! !
! ) "
! !
) "" !
" !
!"
", '
Features
. ! "
' /01 ! 2
. 3!
7 " ! " 8
" (& )
%& '
") ) ! " *
9 : ;9 : < ;
< ;
$9 3:#9
" 5 3 46
# "
Factory options
7=
4?
" >'> ! (
" ")
5"
6 4?
5"
>6 4? " "
"!
!" $7
" ! "
* , !
RF type-1
Version 1.2
RF type-2
" !5"
5"
RF type-3
6 4?
RF type-4
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
General Specification
9!
%& '
7 " 3!
!4 "
('( <
(& )
#$$$ %& '
#$$$ %& '
"!
4? AVG . " " 9
5tolerance ± 2dBm6
@< ;
, !
","
$7
%&
A%C (
%&
D9 @
!"
$9 3:#9
# " !
((±2)
"!
7,
- *6
B&
A &C >& )
A &C
" !
!"
?! 2
" !
7 " "!
5(±2)
# ! "!
! "
>& >< % ( <& &
)8 7
57 ! "
*@ 8.?7 5.!"
>(±2)
! "
' /01 #
%& '> %& '>
9 :@ ;9 :@ < ;
?! 2
)@*@
" !
" @B@%
'&
!=
! " *3
" ! * 3
! " !
! " !
43 % %%$
7= (
7= >'>
& F (&G =
3!
& H B&G=
("
(-
&C
"8
3!
""
-' B
E4
, 8
- &(
E4
, 8
- >
! " !
""
-'
"8
! " !
*6
5 - -06
DC power input: (factory option)
7= (
7= >'>
Version 1.2
'B(
(' (
>' >(
>'>
>' <(
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Pin outs:
The external circuit for WiFi activity LED display (LED function is a factory option)
The function of pin 6 is optional to WPS (GPIO7) , a factory option.
The external circuit for WPS function input (factory option), uses a tact switch.
Version 1.2
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Dimension
Without Shielding Cover
Subject to change without notice
Version 1.2
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
With Shielding Cover
Subject to change without notice
Version 1.2
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Placement Notice
In order to get a better performance please don’t put any metal shielding in the
surrounding area of module and try to leave the module placed in the corner of
chassis board as close as possible.
Corner of the chassis board
Considering antenna field pattern it is better to put the module in horizontal way
with the chassis board.
Version 1.2
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
Chip Antenna
The antenna area in the module should protrude outside the Ground at least 5mm
At least 5mm No Ground
At least 5mm
Keep the distance at least 13 cm long with WLAN or other antenna of same frequency
band to avoid the interference or deteriorate the performance.
Version 1.2
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
RF out
This RF out pin, it needs the input impedance of 50 Ohm
RF Out
50 Ohm Feed line
No Ground
50 Ohm Feed line:
H1: 20 ~ 60 mil
Er1: 4.2
W1: 20 mil
W2: 20 mil
D1: 5 mil
C1: 0.7 mil
C2: 0.7 mil
T1: 1.4 mil (1 oz)
Impedance: 51 ~ 53 Ohm
Version 1.2
10
晶訊科技股份有限公司
CC&C Technologies, Inc.
RF connector
RF connector dimensions (unit: mm)
Version 1.2
11
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
WM-294-V2 module with RTL8188EUS chip, DC3.3V input:
Without Shielding Cover
With Shielding Cover
Version 1.2
12
晶訊科技股份有限公司
CC&C Technologies, Inc.
8F, No. 150, Jian Yi Road, Zhonghe District,
New Taipei City, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
PCB Layout footprint
1. The recommended layout pads for WM-294-V2 module are shown below. (module top view)
All dimensions are in millimeters.
Tolerance: +- 0.05mm
Version 1.2
13
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
Note 1: Compliance of this device in all final host configurations is the responsibility of the Grantee.
OEM integrators are responsible to satisfy RF exposure requirements. SAR evaluation is valid for portable,
mobile and fixed applications.
Note 2: Any modifications made to the module will void the Grant of Certification, this module is limited to OEM
installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the
device, only software or operating procedure shall be placed in the end-user operating manual of final products.
Note 3: The device must not transmit simultaneously with any other antenna or transmitter.
Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring
compliance with the module(s) installed and fully operational. For example, if a host was previously authorized as
an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module
and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and
operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this
may depend on the details of how the module is integrated with the host, CC&C Technologies, Inc. shall provide
guidance to the host manufacturer for compliance with the Part 15B requirements.
Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: PANWM294V2”
The transmitter module must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the host product. CC&C Technologies, Inc. is responsible
for the compliance of the module in all final hosts.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:527d81f1-9733-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:02 11:08:27Z
Create Date                     : 2017:07:02 11:08:27Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:527d81f1-9733-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools