CDVI WIRELESS S P A FKT PUSH TO OPERATE TRANSMITTER #050510 User Manual IS FKTUAUK

CDVI WIRELESS S.P.A. PUSH TO OPERATE TRANSMITTER #050510 IS FKTUAUK

Users Manual

SENTRY PUSH TO OPERATE WIRELESS BUTTON Carrier frequency 433,92 MHzModulation AM/ASKN° channels 1E.r.p. 1 mWBattery type CR 123AOperating voltage 3 VdcCurrent consumption 12-15 µA : stand-by20 mA : transmissionBattery life 2 yearsSecurity protocol Fixed Code9Code combinations 3Range in open space 300 FtOperating temperature 14°/+131°FEnclosure IP grade IP55Dimensions (in.) 3.54 x 2.36 x 1.08Weight ( oz. ) 3.282 - TECHNICAL SPECIFICATIONS1 - INTRODUCTIONThe Sentry Push to operate Wireless Button ( #050510 ) is a special radio transmitter operating at 433,92 MHz in AM/ASK modulation. It’s mainly composed by a capacitive touch sensitive circuit and by a radio transmitter. It can be used to operate gates or garage doors with compatible 433 MHz receiver.The security protocol allows up to 19683 code combinations. Each product is already factory programmed with a different security code. The button is battery supplied with a CR123A lithium battery for 2 year life. The enclosure protection grade IP55 allows outdoor installations.The product fully complies with the EMC European Regulations (CE) and the FCC Part 15 Regulations. Use and installation manualThank you for choosing this product . You are recommended to read this manual carefully before installing this product.Made in ItalyIS-FKTUAUK Rev. 2 del 10/06/2008USAutomatic LTD118 Hillside Drive Lewisville, TX 750571-866-711-0001www.sentrygateopener.comWARRANTYUSAutomatic, LTD warrants this product to be free of defects in materials and workmanship for 2 YEAR. For a period of 2 YEAR following purchase USAutomatic, LTD. will repair or replace the product free of charge, including parts, shop labor and return shipping and handling. This 2 YEAR warranty does not cover the plastic case from normal wear or damage due to misuse of the Push To Operate module. To have the product sent for warranty consideration, it must be returned with the proof of purchase and a return authorization number. To obtain a return authorization number please visit or call 1-888-711-0001 for assistance.The return authorization number must be clearly marked on the outside of the return package or it may not be accepted.www.sentrygateopener.com#050510Mounting screwsPlugsCR123A Lithium BatteryLift to removebattery3 - INSTALLATION PHASES4 - OPERATEThe Button operates when you skim over the external surface with the hand. The sensitivity of the detector can change according to the fixing surface type: metallic surfaces increase the sensitivity but can reduce the range of the radio transmission. Approach the cover or touch it until the buzzer sounds.The RF transmissions lasts all time the buzzer sounds. Normally it’s necessary to skim over the cover with the hand and not only with a single finger.Touch sensitive areaRF AntennaBuzzerThe appliance uses a lithium battery type CR123A. Insert the new battery on the battery location, respecting the right polarity. The removal and the disposal of the battery must have effected before the elimination of the appliance and according to the current Regulations. ATTENTION: - Danger of explosion if the battery is not replaced in the correct way! Replace only with an equal or equivalent type.5 - BATTERY REPLACEMENT1. Locate the best position for the installation, avoiding metallic surfaces that could decrease the RF transmission.2. Using the box bottom as a template mark the position of the 4 mounting holes. 3. Drill the mounting holes and insert the plugs.4. Assemble base and seal together, install to mounting surface using 4 screws.5. Install the module to base and secure with the screws.This device complies with FCC Rules Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation.Part. 15 of the FCC ID : PWJFKTNoticeAny changes or modification to this equipment not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Navigation menu