CDVI WIRELESS S P A TMC1C9V Part 15 Security / Remote Control Transmitter User Manual PWJTMC1C9V UserMan

CDVI WIRELESS S.P.A. Part 15 Security / Remote Control Transmitter PWJTMC1C9V UserMan

PWJTMC1C9V UserMan

ELPRO INNOTEK SPA VIA PIAVE, 23 - 31020 S.PIETRO DI FELETTO (TV) – ITALY Tel. +39.0438.450860 R.A. – Fax. +39.0438.455628 - P.I. 03023780269 internet: www.erone.com - e-mail: info@erone.com PRODUCT TECHNICAL SPECIFICATIONS Product Brand Type File Rev. Date FCC-ID Encoded Transmitter Module - SETMC1C9V IS-TMC1C9V 2 19/1/2015 PWJTMC1C9V Description Saw transmitter module with external aerial and internal security code ( Keeloq Hopping code ) Applications RF Transmissions of digital signal from pure contacts Technical specifications Parameter Min Typ Max Unit Band 433,05 – 434,790 MHz Carrier frequency - 433,92 - MHz Carrier frequency tolerance  100 KHz E.r.p emitted power - - 60.50 dBµV/m Spurious emissions - - -73 dBm Modulation AM / ASK Baud-rate - 834 - Bit/sec Output load - 50 -  Power supply - +9 - V Current consumption - - 17 mA Dimensions ( l x h x p ) 45x 28 x 6 mm Operating temperature - 20  + 80 °C Wirings 9V Battery connection + 1 antenna + NO input 200 mm Input 1 - Range ( in open space ) 1000 m Input type Pure contact Security coding Keeloq Hopping code Security code combinations 264 Mechanical specifications 44286 Block Diagram WIRINGS 1 : BLACK = N.O. INPUT CONTACT 2 : BLACK = N.O. INPUT CONTACT 7 : BLUE = ANTENNA 9 : RED = POWER SUPPLY (+ 9Vdc) 8 : BLACK = POWER SUPPLY 0V FCC Warning Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: this device is intended only for OEM integrators. Integration is strictly restricted under control of the Grantee. NOTES FOR INTEGRATORS For a host manufacture’s using a certified modular, if (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID: PWJTMC1C9V” or “Contains FCC ID: PWJTMC1C9V” must be used. The host OEM user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID.

Navigation menu