CHINA ELECTRONICS B04 Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3436659
Application ID	q3m0MqwSolXP1DHD/wsurQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.68kB (83518 bits)
Date Submitted	2017-06-23 00:00:00
Date Available	2017-06-23 00:00:00
Creation Date	2017-10-22 04:42:34
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 04:42:34
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Administrator

B04
Bluetooth Speaker Instruction Manual
What’s included:
1x Bluetooth Speaker
1 x USB to Micro-USB charging cable
1 x 3.5 mm Audio Cable
1 x Handle
1 x Instruction Manual
MADE IN CHINA
Tech Specifications:
Output Power: 2W
Frequency Response: 120Hz-16kHz
Driver: 50mm
Power Supply: USB, DC 5V 500mA
Battery Capacity: 400mAh
Playback time (max vol): 2 Hours
Battery Charging Time: 1-1.5 hours
Button ControlButton Control:
1.Micro USB
2.LED Red/Blue
3.3.5mm Audio Input (line-in)
4.Power ON/OFF
Instructions:
1.Charging the Speaker: before using the
speaker for the first time charge it for at least
2-4 hours.
1.1.Plug the Micro-USB cable into the input port
of the speaker.
1.2.Plug the opposite USB end into the USB port
of a computer or compatible AC wall adapter.
The red LED turns on to indicate that the unit
is charging.
1.3.Once fully charged, the red LED turns off.
2.Pairing the Device:
2.1.Place speaker within 30ft of the Bluetooth
enabled device.
2.2.Slide the ON/OFF button to ON. The blue LED
flashes 3 times slowly, then flashes quickly to indicate Bluetooth pairing mode.
2.3.Follow the instructions of your device to search for the speaker.
2.4.The speaker is called “B04” If a PIN
is required, enter “0000.”
2.5.Three tones will sound an the blue LED flashes
slowly when pairing is complete.
3.Basic instructions:
To turn the speaker on, slide the ON/OFF
button to ON.
The speaker beeps and a blue LED flashes
slowly.
The blue LED stays on when playing music.
To turn speaker off, slide the ON/OFF button
to OFF.
4.LED indicator
Charging: Red LED on
Fully Charged: Red LED off
Pairing Mode: Blue LED flashes quickly
Connected: Blue LED flashes slowly
SAFETY PRECAUTIONS:
Please note the following precautions
before initial use. Failure to comply may be
dangerous and cause damage to your mobile
devices.
Charge the speaker fully before initial use.
Using an incorrect AC power adapter, adapter
tip or USB cable can cause damage to both
your mobile devices and the headphones.
Always recharge the headphones in a wellventilated area. Do not leave the speaker in
hot or cold places.
Do not immerse the speaker in water or
expose it to moisture or weather conditions.
Do not drop, knock, or shake the speaker.
Rough handling can damage the internal
precision component and its boards.
Keep the speaker away from children, this
device is not a toy.
While charging, the speaker casing may
become warm, which is normal as the
charging and discharging processes generate
heat.
Keep the speaker away from fire or other
sources of heat. Exposing the
speaker to high temperatures may cause it
to explode.
Do not short-circuit the speaker, as this may
cause damage to the unit.
Unauthorized changed or modifications may
void your right to use this product.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d272a8f8-93d4-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:06:28 04:14:26Z
Create Date                     : 2017:06:28 04:14:26Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:d272a8f8-93d4-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools