CHINA ELECTRONICS BARREL Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3270529
Application ID	1cWjF5LXgc54qqdxuFAqLA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.05kB (788162 bits)
Date Submitted	2017-01-25 00:00:00
Date Available	2017-01-25 00:00:00
Creation Date	2017-12-21 11:50:15
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-21 11:50:15
Document Title	User Manual

Bluetooth Speaker / BARREL
USER MANUAL
This product is guaranteed for 2 years against defects in manufacturing or assembly.
This guarantee only applies to the primary purchase by the end user. It does not cover issues related to
improper handling by the user. Proof of purchase is required in order to render the warranty valid.
The warranty does not cover problems associated with improper use, whether it is a result of
negligence, processing, failure to store properly (excessive heat or humidity), improper installation or
unauthorized repairs.
The manufacturer is contractually required to repair or replace the defective product. ALTEC
LANSING is under no financial obligation to pay any amount in excess of that paid by the end user.
Expired warranty period
No proof of purchase
Visible damage / breakage
Oxidation
Improper use
Use of non-approved accessories
Product altered, repaired or modified by an unauthorized third party
Missing or altered serial number
Warranty voided due to broken or altered packaging
Damage due to accident, neglect, improper maintenance/care or force majeure
Damage due to the installation of third-party software or a virus
Read these safety instructions before using your device and store them for possible future reference.
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capacity. Persons who have not read the manual, unless
they have received explanations by a person responsible for their safety and
supervision should not use this unit.
Children should be monitored to ensure that they do not play with the device.
The device should always be readily accessible.
The device should not be exposed to dripping or splashing water.
No objects filled with liquids such as vases shall be placed on the device.
Always leave a minimum distance of 10 cm around the unit to ensure sufficient
ventilation.
Open flame sources, such as candles, should not be placed on top of the device.
The device is intended for use only in a temperate climate.
At full volume, prolonged listening to the portable audio device may damage the
drone, tinnitus, hyperacusis).
So we recommend not to listen to the portable audio device at high audio volume and
no more than one hour per day at medium audio volume.
Switch the device off where the use of the device is not allowed or where there is a risk
of causing interference or danger, for example on board an aircraft, near medical
equipment, fuel, chemicals or blasting sites.
Check the current laws and regulations regarding the use of this device in the areas where
you drive.
Do not handle the device when driving.
Concentrate fully on the driving
and alarm systems.
All wireless devices are susceptible to interference which may affect their performance.
All our device conform to international standards and regulations, and if need be
national ones, with a view to limiting user exposure to electromagnetic fields. These
standards and regulations were adopted after the completion of extensive scientific
research. This research established no link between the use of the mobile headset and
any adverse effects on health if the device is used in accordance with standard practices.
Only qualified people are authorized to install or repair this product
2402-2480MHz
Product Size: 85x85x65mm
Product Weight:80g
Package Contents
Speaker BARREL
User Manual
USB to Micro-USB Cable
3.5mm Audio Cable
3. Charging the Speaker
Before using the speaker for the first time charge it for at least 24 hours.
Plug the micro-USB cable into the port of the speaker.
Plug the opposite USB end into the USB port of a computer or compatible AC wall
adapter.
The red LED turns on to indicate that the unit is charging.
Once fully charged, the red LED turns off.
Pairing the Device
Place speaker within 30ft of the Bluetooth-enabled device.
Slide the ON/OFF button to ON. The blue LED flashes 3 times slowly, then flashes
quickly to indicate Bluetooth pairing mode.
Follow the instructions of your device to search for the speaker.
The speaker is called " Barrel." If a PIN is required, enter "0000."
The blue LED flashes slowly when pairing is complete.
Basic instructions
To turn the speaker on, slide the ON/OFF button to
ON. The speaker beeps and a blue LED flashes slowly.
The blue LED stays on when playing music.
To turn speaker off, slide the ON/OFF button to OFF.
LED indicator
Charging: Red LED on Fully
Charged: Red LED off
Pairing Mode: Blue LED flashes quickly
Connected: Blue LED on
Playing: Blue LED flashes slowly
Speaker button functions
LED Red/Blue
Power On/Off
Micro USB
Use a computer USB port/AC power adapter with USB
When the battery is low, approximately 1.5-2 hours of charging time is necessary to
recharge the battery.
3.5mm audio input (line-in)
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and the
that when you dispose of the appliance, it must be separately collected.
To avoid possible hearing damage, do not listen at high audio volume for long
periods of time.
Please visit www.alteclansing.com
MARKET MAKER BRAND LICENSING
79/81 Ancienne Route Nationale 7
69570 DARDILLY
FRANCE
HELPLINE 0811 482 202
Product features, specifications and appearances are subject to change without notice.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
©2017 AL Infinity, LLC.
All rights reserved.
ALTEC LANSING, HORN Design and related logos are registered
trademarks of AL Infinity and used under license.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2ab23040-a1a2-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:15 17:47:06Z
Create Date                     : 2017:07:15 17:47:06Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:2ab23040-a1a2-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools