CHINA ELECTRONICS Q11 BLUETOOTH SPEAKER User Manual
China Electronics Shenzhen Company BLUETOOTH SPEAKER
User Manual
Block Outdoor Waterproof
Bluetooth® Speaker
Instruction Manual
1 x Block Speaker
1 x USB to Micro-USB charging cable
1 x Instruction Manual
Pairing Name: “Block Speaker”
Battery capacity: 400mAh/3.7V
Listening Time (at max vol): 1.5 - 2 hours
Charging Time: 1 hour
Charging the speaker:
Using a Regulated USB Adapter:
Connect the provided USB cable to a
regulated USB adapter.
Connect the oposite, Micro-USB end of the
cable to the charging port on the speaker.
Plug the USB adapter into the outlet to
begin charging.
Using a Computer:
Connect a USB cable to a USB outlet on
your computer.
Make sure the computer is on to begin
charging the speaker.
Connecting the speaker with Bluetooth:
Press and hold the Power ON/OFF button
until the tone sounds and Blue LED begins
ashing.
Once on, the speaker will enter Bluetooth
mode.
Using a Bluetooth enabled device, search
for “Block Speaker” from the list of
available options.
Blue LED will adjust to a solid glow once
paired successfully.
Using the Speaker:
Mode Button:
Short press: play/pause the audio
Short Press: answer incoming call
Short Press: hang up ongoing call
Long Press: disconnect Bluetooth device
Double Press: Redial most recent number
Track Selection/Volume:
Use the audio device to control track
selectionand volume
Note: In order to charge device use only
accessory cable (provided with device) or
the cable included with your own device by
the manufacturer.
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Charge the speaker completely before
initial use for best practices.
If the device does not respond once it
is powered on, the battery capacity may
be low. Do not over charge the internal
battery.
Do not immerse into water or expose it to
moisture or weather conditions.
Do not drop, knock, or shake. Rough
handling can damage the internal precision
component and its boards.
Keep away from children, this device is
not a toy.
Keep away from re or other sources of
heat. Expose to high temperatures may
cause it to explode.
Do not short-circuit, as this may cause
damage to the unit.
Unauthorized changed or modications
may void your right to use this product.
While using, always comply with any
special regulations that may apply to the
area you are in and always turn off your
mobile device when its use is prohibited.
1.
a
•
•
•
b.
•
*
2.
a.
•
•
•
3.
a.
•
•
•
•
•
b.
•
*
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
6.
7.
8.
•
•
•
•
Power ON/OFF
Mode - (Play/
Pause/Call Button)
Charging Port
Reset Button
LED Indicator
Line-In Cover
Carrying Loop
Foot/Base
What’s included:
Tech Specications
Instructions: SAFETY PRECAUTIONS:
MADE IN CHINA
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
•
(1)
(2)
*
FCC Statement:
LED Indicator
Charging: Glowing Red LED
Charging Complete: Red LED off
Pairing Mode: Flashing Blue LED
Connected: Slow Pulse, Blue LED
Low Battery: Flashing Red LED
•
•
•
•
•
Q11
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the
equipment and receiver.
o Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
o Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.