CHOICE FORTUNE SC-40FK700N LED TV User Manual

CHOICE FORTUNE HOLDINGS LIMITED LED TV

UserManual.wiki >

CHOICE FORTUNE >

SC 40FK700N User Manual HTML Version

User Manual

En -

CONTENTS

Important Safety Instructions 2

Safety Information 3

Preparation 4

What's Included 4

Front View 5

Rear View 6

Installing the Base Stand 7

Removing the Stand for Wall-Mounting 7

Remote Control 8

Connecting External Devices 9

Basic Operations 10

Menu Operation

Picture

Initial Setup

Sound 15

Function

Time 18

noitpO 19

LOCK 20

Channel 21

Network Setting

Digital Media Palyer

Introduction

27Internet

Parental Control 33

Troubleshooting 35

Limited Warranty 38

En -

IMPORTANT SAFETY INSTRUCTIONS

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as the power supply cord

or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of or electric shock,

do not expose this apparatus to rain or moisture.

The apparatus should not be exposed to dripping or

splashing. Objects filled with liquids, such as vases

should not be placed on apparatus.

WARNING: The batteries shall not be exposed to

excessive heat such as sunshine, or the like.

WARNING: The mains plug is used as disconnect

device, the disconnect device shall remain readily

operable.

WARNING:

To reduce

To prevent injury,this apparatus must be

securely attached to the wall in accordance with the

installation instrnction.

the risk of electric shock, do not

remove cover (or back) as there are no user-serviceable

parts inside. Refer servicing to personnel.

This lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of

electric shock.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance instructions in the literature accompanying

the appliance.

This equipment is a Class II or double insulated

electrical appliance. It has been designed in such

a way that it does not require a safety connection

to electrical earth.

• Read these instructions – All the safety

and operating instructions should be read

before this product is operated.

• Keep these instructions – The safety and

operating instructions should be retained for

future reference.

• Heed all warnings – All warnings on the

appliance and in the operating instructions

should be adhered to.

• Follow all instructions – All operating and

use instructions should be followed.

• Do not use this apparatus near water

– The appliance should not be used near

water or moisture – for example, in a wet

basement or near a swimming pool, and the

like.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than

the other. A grounding-type plug has two

blades and a third grounding prong. The

wide blade or the third prong are provided

for your safety. If the provided plug does not

into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

• Only use attachments/accessories

by the manufacturer.

• Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is

used, use caution when moving the cart/

apparatus combination to avoid injury from

tip-over.

• Unplug this apparatus during lightning

storms or when unused for long periods of

time.

1. The ventilation should not be impeded by covering the

ventilation openings with items, such as newspapers,

table-cloths, curtains, etc.;

2. No naked flame sources, such as lighted candles ,

should be placed on the apparatus;

3. The use of apparatus in moderate climates.

En -

SAFETY INFORMATION

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in

this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the

label at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other

electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or when not in using the television for long periods, turn off the power

switch on the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist

areas, such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,

liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything

accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service

the unit yourself is dangerous and may invalidate the product’s warranty. personnel

must only service this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not

use for long period, or when the batteries are exhausted.

• Do not break open or throw exhausted batteries into a

• For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.

• Install only new batteries of the same type in your product.

• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may

shorten the life of the batteries or cause batteries to leak.

• Do not mix old and new batteries.

• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel

Metal Hydride) batteries.

• Batteries should be recycled or disposed of as per state and local guidelines.

• Do not attempt to recharge disposable batteries.

• Do not short circuit battery terminals.

• Keep away from children.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure

at least 5cm (2’’) clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care

of the remote control.

• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based

• Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding plug has two blades and a third

grounding prong, the wide blade,or the third prong is provided for your safety. If the provided

plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

• Refer all servicing to a service personnel.Servicing is required if the apparatus does

not operate normally or if the apparatus, including the power supply cord or pulg, has been

damaged in any way.

• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus;

when the apparatus has been exposed to rain or moisture; or if the apparatus has been

dropped.

En -

PREPARATION

What's Included

User Manual

Quick Start Guide

Quick

Start Guide

Remote Control with Batteries(2*AAA)

TV Set

TV Stand Four Screws(ST4x16mm)

In pu t

HOM E

7 8 9

456

1 2 3

Q.MENU

ExitBack

VOL C H

TTS

INFO

MTS/Audio

List

En -

PREPARATION

Front View

4. VOL+/-

Press to adjust the volume.

3. CH+/-

Press to select a channel.

2. MENU

Display the OSD (on screen display) menu.

1. SOURCE

Press to select among different input signal sources.

5. POWER

Switch the TV between On / Standby mode.

6. IR (Infrared Receiver)

Receive IR signals from the remote control.

7. POWER Indicator

Illuminate red when the TV is in standby mode.

ECRUOS

CH+

CH-

VOL+

VOL-

The batteries used with this product contain chemicals that are harmful to the

environment. To preserve ourenvironment, dispose of used batteries according

to your local laws or regulations.

En -

PREPARATION

Rear View

1. Power Cord

Connect to AC power outlet.

9. Headphone Output Socket

Connect to the Headphones.

2. OPTICAL Output

Connect a digital sound system to this

jack.

8. AUDIO Input

Connect to the AUDIO(L/R) output

sockets on external audio device.

7. Ypbpr/AV

4. HDMI Inputs

Connect to a (HD) signal

input device.

5. DTV/TV Input

Connect to the antenna (75Ω VHF/UHF)

socket with the RF coaxial cable.

6. USB Port

YPbPr/AV

3. LAN

Network connection port.

Connect to AV devices with component

(Y/Pb/Pr) video and audio output sockets.

COMPONENT&VIDEO share with AUDIO

IN(L/R)subscribe to.Connect to the composite

VIDEO.

200

(ARC)

Note:HDMI1 with ARC function.This item is used to turn on/off Audio Return Channel.

When ARC is on,the TV can return the audio to connected HDMI device.(Amplifier,etc)

Update also play photo files,

and video files.music

En -

PREPARATION

Installing the Base Stand

WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.

• 1.Lay the TV face-down on a flat,

cushioned surface to avoid damaging

or scratching.

• 2.Untighten the 4 pcs screws holding

the stand assembly and remove them.

• 3.Attach the wall-mount bracket to

the TV using the mounting holes on

the back of the TV. Mount this TV

according to the instructions included

in the wall-mount bracket.

Removing the Stand for Wall-Mounting

• 1. Lay the TV face-down on a flat,

cushioned surface to avoid damaging

or scratching.

• 2.Fix the left base stand to the TV

using the 2 pcs provided screws(ST4x16mm).

• 3.Fix the right base stand assembly

to the TV using the 2 pcs provided

screws(ST4x16mm).

Wall Moun ting

Your new TV is heavy, please consult with professional wall mount installer to perform this installation.

The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied).

Remove the screws holding the base to the base bracket and lift the base away (do not remove the base

mounting brackets). Mount the VESA bracket using 4*M6 isometric threaded screws (Not Supplied).

WARNING

Never place a television set in an unstable location. A television set may fall, causing serious personal

injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such

as:

-Using cabinets or stands recommended by the manufacturer of the television set.

-Only using furniture that can safely support the television set.

-Ensuring the television set is not overhanging the edge of the supporting furniture.

-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring

both the furniture and the television set to a suitable support.

-Not placing the television set on cloth or other materials that may be located between the television set

and supporting furniture.

-Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should

be applied.

En -

PREPARATION

Remote Control

In p u t

HOME

7 8 9

456

1 2 3

Q.MENU Menu

ExitBack

VOL CH

TTS

INFO

MTS/Audio

LHOME

ist

1. : Turn the TV on and off.POWER

2. : This button is used to switch among Input

different sources, Select a source and press

ENTER button to confirm.

3. : Directly select channel Digital Buttons(0-9, -)

with digital buttons.

4. Switch to the previous program.:

5. : If network connects, press this key YouTube

to view YouTube directly.

6. : Press it to show channel list and favorite List

list on screen.

7. Press it to go to App home page.HOME:

8. : If network connects, press this key NETFLIX

to view NETFLIX directly.

9. : Press this key to go to quick menu. Q.MENU

10. Menu: Display the main menu or exit the

current menu.

11. : Validation key.ENTER

12. : Use to select Arrow buttons 

on-screen menu items and change menu values.

13. Return. Back:

14. : Exit the menu. Exit

15. It's used as Color buttons:

or Program

Edit menu.

16. : Press this button to cut off the sound of MUTE

the TV set temporarily, press again to resume.

TS ree this but on to adjust TT n17. : P t S oTor off .

18. : Press these buttons to adjust the VOL -+/

volume.

19. : CH /Press these buttons to change

channel upward or downward.

20. Digital Media Player control

:button Include play/pause, stop,

backward, forward is used in USB

mode .

Please refer to relevnat instructions in

the section of multimed player.

21. : Display the program information INFO .

: In USB mode, press this MTS Audio/22.

button to switch audio track when movie

is playing. In TV mode, press this button

to switch MTS or Audio Language.

23. : Press this button to select VUDU VUDU application.

24. : Press this button to select pandorapandora

application.

25. : Press this button to adjust CC modeCC .

CONNECTING EXTERNAL DEVICES

En -

CONNECTING EXTERNAL DEVICES

Game Console

Blu-ray Player / Recorder

Satellite

VCR Satellite Receiver

Audio Cable

(not included)

Video Camera

Headphone

HDMI Device

HDMI Cable

(not included)

Digital Audio System

RF Cable

(not included)

Y Pb Pr/ A V

(ARC)

En -

Initial Setup

• Connect the power cord to the power socket after you have completed all the

physical connections. At this stage, the TV will enter Standby Mode and the red

LED indicator will illuminate.

• In Standby Mode, press the button on the main unit or on the remote control to

turn the TV on. The red LED indicator will turn off.

• The first time you turn the TV on, it will go into the Setup Wizard. Press

buttons to select your desired mode and press ENTER to

Basic Operations

En -

Initial Setup

7 8

Home Mode : The picture mode will be Standard if you select this mode.

Retail Mode : Select Dynamic Mode if you would like your picture to be brighter.

At times this mode may use more energy to operate the Volume/Sound Mode

and Picture Mode.

• The SLEEP-MODE Power should be less than 0.5 W.

En -

Basic Operations

Menu Operation

1 Input Setup

Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are

these options for you to select: "TV", "AV", "Component", "HDMI1", “HDMI2", “USB".

Use /key to select a input source and press ENTER key to confirm.

2 Channels Selection

There are four ways to select channel:

1) Using number keys, and ENTER keys on the remote control

to select channel directly.

To select channel 90, press .

When you use the number buttons, you can directly select channels that were either erased

or not memorized.

2) Using CH / key on the remote control or on your TV to select channel.

When you press the CH / key, the TV changes channels in sequence. You will see all

the channels that the TV has memorized.

You will not see channels that were either erased or not memorized.

3) Press key to return to previous channel, press it again to return to

current channel.

To quickly switch between two channels that are far apart, tune to one channel, then use the

number keys to select the second channel. Then use the button to quickly

between them.

alternate

is not activated if no channel has been changed after TV turning on.

4) Select channels from "Channels List" or "Favorite List".

Press LIST key to choose from "Channel List" menu.

3 Volume Adjustment and Mute Setup

Volume adjustment

Press VOL / key on the remote control or the TV to display "Volume" menu,

adjust the volume of TV between 0 to 100 by using VOL / key:

Input Source

90ENT ER

Input Source

TV HDMI 2 USBAV Component HDMI 1

En -

Menu Operation

4 Current Channel Information

Press “INFO” key on the remote control to view current

channel information, the indications of channel

information are listed in the following table.

Press “EXIT” key on the remote control to exit this OSD.

01/ 012005 08:

Moving picture 480i 4:3 08:30 09:30

 To increase the volume, press VOL key;

 To decrease the volume, press VOL key;

Mute

Press “MUTE” and the sound cuts off. The MUTE icon will appear in the lower-left

corner of the screen.

To resume sound, press the “MUTE” button again, or simply press the key.

Mute

Picture

Sound

Function

Time

Option

Lock

Channel

1. Press MENU key to display the main menu on the screen.

2. Press / key to select "Picture" option.

3. Press  key to enter "Picture" submenu.

4. You can also press the PICTURE key on the

remote control to select one of the picture settings.

Picture Mode

Your TV has four picture settings (Vivid, Standard,Movie,Eco Save,

User) that are preset at the factory. Only "User" mode can be

set to your preference by adjusting particular items such as

Contrast, Brightness, Color, Sharpness.

1. Press / key to select "Picture Mode" option.

3. Press / key to select one picture mode.

VOL

14.1 ATSC-1

2. Press “” or "ENTER" key to confirm.

En -

Menu system instruction

Picture Mode

Contrast 70

Brightness

Color

Sharpness

Tint

Backlight

Color Temperature

100

User settings for PICTURE

(Contrast, Brightness, Color, Sharpness,Tint)

Your set has several settings which allow you to control picture

quality.

1. Press ▲/▼ key to select a particular item.

2. Press / key to decrease or increase the value of a particular

item.

Note: The adjusted values are stored according to the selected

particular item.

Backlight

You can Change the brightness of the entire screen according to your preference.

1. Press / key to select "Backlight" option.

2. Press/ key to increace or decreace the backlight value.

Color Temperature

You can change the color of the entire screen according to your preference.

1. Press / key to select "Color Temperature" option.

3. Press / key to select one color temp.

Contrast: Adjusts the lightness and darkness between objects and the background.

Brightness: Adjusts the brightness of the picture.

Color: Adjusts the colors, making them lighter or darker.

Sharpness: Adjusts the outline of objects to either sharpen them or make them

more dull.

Tint: Adjusts the Tint of the picture.

Backlight: Adjusts the brightness of the whole screen.

Picture

Cool: Makes whites bluish.

Standard: Makes whites nature

Warm: Makes whites reddish.

2. Press “” or "ENTER" key to confirm.

En -

Menu system instruction

Sound Mode

Balance

AVL

Surround Sound

Digital Audio Output

Audio Language

1. Press MENU key to display the main menu on the

screen.

2. Press / key to select "Sound" option.

3. Press  key to enter "Sound" submenu.

4. You can also press the SOUND key on the remote

control to select one of the sound.

Sound Mode

You can select the type of the special sound effect

to be used when watching a given broadcast.

Your TV has five sound settings (“Standard”, “Music”,“Movie”,

“Sports”,“User”) that are preset at the factory.

1. Press / key to select "Sound Mode" option.

3. Press / key to select one sound mode.

Balance

If the volumes of the left speaker and the right speaker are not the same, you can adjust

the "Balance" to suit your personal preference.

1. Press / key to select "Balance" option.

2. Press / key to decrease or increase the value of the item.

AVL

Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the

volume every time the channel is changed. “AVL” automatically adjusts the volume of the

desired channel by lowering the sound output when the modulation signal is high or by

raising the sound output whenthe modulation signal is low.

1. Press / key to select “AVL” option.

3. Press / key to select “On” or “Off”.

Surround Sound

This is used to turn on surround sound to gain better sound effect.

1. Press / key to select "Surround sound” option.

3. Press / key to select “Surround” or “Off”.

1. Press / key to select " ” option.

Video Description

3. Press / key to select “On” or “Off”.

Sound

 Standard: Selects the normal sound mode.

 Music: Provides clear and live sound for music.

 Movie: Provides live and full sound for movies.

 Sports: Emphasizes bass over other sounds.

 User: Selects your custom sound settings.

Video Description

HDMI-ARC

DAP

2. Press “” or "ENTER" key to confirm.

En -

Menu system instruction

SOUND

Digital Audio Output

This is used to . set digital audio output

1. Press / key to select "Digital Audio Output” option.

3. Press / key to select “Auto” or “PCM”.

Audio Language

You can set the primary and secondary language for audio.

HDMI- ARC

Turn on or turn off the HDMI- ARC function.

1. Press MENU key to display the main menu

on the screen.

2. Press / key to select “Function” option.

3. Press key to enter “Function” submenu.

Noise Reduction

Press / key to select the

Press / key to select the Mpeg Noise Rdeuction

Noise Reduction mode. You can select the right

mode to match the pictures.

MPEG Noise Reduction

mode: off/low/middle/high. The picture will be better

when it is in “high” mode.

Aspect Ratio

1. Press / key to select “Aspect Ratio” option.

3. Press / key to change the size of the picture

on the size of the picture on the screen.

Function

User

Off

Noise Reduction

MPEG Noise Reduction

Aspect Ratio

Link Setup

Netflix Deactive

Netflix ESN

Netflix Version

VUDU Deactivation

TTS

DAP

DAP Enable

DAP Mode

Surrond Virtualizer

Dialog Enhancer

Auto Voulme Control

Standard

High

Low

Off

DAP

You can set DAP on the DAP submenu.

2. Press “” or "ENTER" key to confirm.

En -

Menu system instruction

Link Setup

Enable link

Auto Power On

Auto Standby

Off

Function

Link Setup

1. Press / key to select “Link Setup” option.

2. Press ENTER or key to enter “Link Setup”

submenu.

Enable Link: Press /to turn on/off the

link setup.

Auto Power On: When this option is “On” and the

TV is in standby mode. T

turn the

TV at the same time.

Auto Standby: When this Option is “On” and the TV

is on, to turn off

standby mode.

Netflix Deactive

1. Press “/" key to select “Netflix Deactive" option.

2. Press “” or "ENTER" key to confirm.

3. Press "Yes" to confirm again, the Netflix will be activated.

Netflix ESN

Display the Netflix Esn information.

Netflix Version

Display the Netflix version.

VUDU Deactivation

1. Press “/" key to select “VUDU Deactivation" option.

2. Press “” or "ENTER" key to confirm.

TTS

You can set TTS information in the TTS menu.

TTS

Verbosity

Rate Support

Pitch Support

Low

Mid

Betty Say

En -

Off Time

On Time

Sleep Timer

Auto Sleep

Auto Sync

Clock --:--

Time Zone

1. Press MENU key to display the main menu on the screen.

2. Press / key to select "Time" option.

3. Press  key to enter "Time" submenu.

Off Time

In "Off Time” item, press button or ENTER button

to enter the submenu, set the day & time to turn off

the TV set.

On Time

In "On Time” item, press button or ENTER button

to enter the submenu, set the time to turn on the TV

set, when the TV set is in the standby mode. You

can also choose which day to control you TV set in a week.

Sleep Timer

1. Press / key to select "Sleep Timer" option.

3. Press / key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins,

60mins, 90mins, 120mins, 180mins, 240mins).

Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power

failure occurs.

Notes: When the time is less than 60 seconds, remind information will be displayed on

the screen. Press any key button to cancel timer function.

Auto Sleep

Press / key to select whether to open the No signal Power off features. If this function is

opened, the TV will power off in ten minutes when there is no signal.

Auto Sync

You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is

decided by the DTV signal.

Clock --:--

When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is

off.

Time Zone

You can choose it to modify your time zone in the TV set.

1. Press / key to select "Time Zone" option.

2. Press / key to select time zone.

Menu system instruction

Time

2. Press “” or "ENTER" key to confirm.

En -

Menu system instruction

Option

1. Press MENU key to display the main menu on the screen.

2. Press / key to select "Option" option.

3. Press  key to enter “Option" submenu.

OSD Language

OSD Language1. Press / key to select “ " option.

2. Press ENTER or  key to select a proper language for OSD

OSD Time

Set the preferred amount of time

for the OSD to be displayed on the screen.

Closed Caption

1. Press / key to select “Closed Caption" option.

2. Press ENTER key to open CC submenu.

Reset

1.Press “/" key to select "Reset" option.

2.Press “" or "ENTER" key to confirm.

3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory

setting.

Network configuration

Please refer to "Network setting"behind.

Software Update(USB)

Internet Update Check

When the TV need to be updated, please copy the new software to a USB storage and

inset the USB storage to TV, then operating by following steps.

1.Press “/" key to select "Software Update(USB)" option.

2.Press “” or "ENTER" key to confirm.

1.Press “/" key to select "Internet Update Check" option.

2.Press “” or "ENTER" key to confirm.

NetworkUpdate Information

1.Press “/" key to select "NetworkUpdate Information" option.

2.Press “” or "ENTER" key to confirm.

User Mode

1.Press “/" key to select "User Mode" option.

2.Press “

3.Switch to use mode "Home" or "Store".

” or "ENTER" key to confirm.

3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes

and don't turn off the power, it will turn off automaticly when updating is finish.

OSD Language

OSD Time

Closed Caption

Reset

Network Configuration

Software Upadate

Internet Update Check

NetworkUpdate Information

User Mode

En -

The "Lock" feature automatically locks out programming that is

deemed inappropriate for children. The user must first enter a Password before any

of the lock restrictions can be set up or changed.

1 Lock. Press / key to select " " option.

2. Press ENTER or  key to enter " " submenu, "Enter Password" menu will appear, Lock

enter your 4-digit password to enter " ” submenu Lock (the default and universal

password is 0000).

Lock System

Set the Lock function on or off.

Lock System 1. Press / key to select " " option.

3. Press / key to select "On" or "Off".

Set Password

Password1. Press / key to select "Set " option.

2. Enter your 4-digit password to enter enter "Set

Password" submenu. Choose any 4-digits for your

new password and enter them. As soon as the 4

digits are entered, the cursor skipped to “Confirm

Password” item, re-enter the same 4 digits, and

your new password has been memorized.

When the programs is locked, you can also press the menu

key, Info key and so on. Then you can press / key to call

back the input-password window.

USA TV

USA TV 1. Press / key to select " " option.

2. Press ENTER key to open USA TV menu.

USA MPAA

USA MPAA 1. Press / key to select " " option.

2. Press ENTER key to open USA MPAA menu.

Canada English

Canada English 1. Press / key to select " " option.

2. Press ENTER key to open Canada English menu.

Canada French

Canada French 1. Press / key to select " " option.

2. Press ENTER key to open Canada French menu.

RRT Setting

RRT Setting 1. Press / key to select " " option.

2. Press ENTER key to open RRT Setting menu.

Block Unrated TV

T Reset

RRT Seset 1. Press / key to select " " option.

2. Press ENTER key to open RRT Seset menu.

Block Unrated TV1. Press / key to select " " option.

2. Press ENTER key to open Block Unrated TV menu.

Menu system instruction

Lock

Please Enter Password

Lock System

Set Password

USA TV

USA MPAA

Canada English

Canada French

RRT Setting

RRT Reset

Block Unrated TV

2. Press “” or "ENTER" key to confirm.

En -

Antenna

Auto Search

DTV Manual Search

ATV Manual Search

Signal Information

Before your television can begin memorizing the

available channels, you must specify the type of

signal source that is connected to the TV (i.e. an

antenna or a cable system).

1. Press MENU key to display the main menu on

the screen.

2. Press / key to select "Channel" option.

3. Press ENTER or  key to enter "Channel" submenu.

Antenna

1.Press / key to select "Antenna" option.

2.Press / key to select "Antenna" or "CABLE"

Auto Search

1. Press / key to select "Auto Search" option.

2. Press  or ENTER key to confirm. then a notice

window will be displayed on the screen.

Select "Start" to start search or "Cancel" to cancel it.

When searching, press EXIT key to exit tuning at any

moment. Press MENU key to skip DTV tuning when

searching DTV, skip ATV tuning when searching ATV.

3. After all the available channels are stored,

the searching menu will exit.

Program Edit

After the program is searched, select “Program Edit”

in the “Channel” menu, press “ENTER” button,

program can be edited such as delete or skip

according to the user's habit.

Skip (Blue) Button

This function can help shield certain program. Program skips

when selecting program by the “ / button on the TV or ”

remote control.

Select the program to be shielded in the“Program Edit”.

Press “Skip” (Blue) button, the skip mark is displayed at the left side of the

program and this program is shielded.

To cancel the Skip function, enter the channel edit menu, select the shielded

program and press “Skip” (Blue) button, the skip mark at the left side of the program

disappears then program is recovered.

Delete (Red) Button

This function can help delete program.

1. Select the program to be deleted in the "Program Edit".

2. Press "Delete"(Red) button, the program will be deleted.

Menu system instruction

Channel

Program Edit

5.1 Globo HD

5.2 Globo HD

Delete Return

Skip Fav

Program Edit

3. Press “” or "ENTER" key to confirm.

En -

Favorite(Yellow) button

This function can help store the favorite program then these programs can be quickly

selected.

Select the program which is favorite.

Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of the Program

Edit is store into the Favorites.

3.T

o cancel the Favorite function, enter the program edit menu, select the program and

press “Fav”(Yellow) button, the favorite mark at the left side of the program disappears.

DTV Manual Search

Enter digital number and press “ENTER” to

select DTV Channel.

Menu system instruction

DTV Manual Search

UHF CH 40

ENTER

Bad Normal Good

DTV 0

NO Signal

Return

En -

ATV Manual Search

1. Press / key to select "ATV Manual Search"

option.

2. Press  or ENTER key to enter submenu.

Current CH

1. Press / key to select the Current CH.

2. Press / key to select current channel.

Fine-Tune

1. Press / key to select the Fine-Tune.

2. Press / key to select a better frequency for

current channel.

Signal Information(Used only in DTV)

Signal Information1. Press / key to select “ "

option.

2. Press “ENTER”or  key ,you can see the

i of the DTV channel. nformation

Menu system instruction

Channel 40

Name TV Globo

Modulation ATSC

Quality 100

Strength 100

ATV Manual Search

Current CH 12

Fine-Tune

Save Return

Frequency 205.250 Mhz

En -

1.Press the “Menu” to enter, then pitch on the ”Option”,and press “ENTER” or click the

right button to enter the submenu.

2.Pitch on the "Network Configuration",and press "ENTER" or click right button to

enter the "Network Configuration".

3.When the wired network is used, if select dynamic IP address setting, pitch on the

"DHCP" in the "Network Configuration", then click the "Setting", and press

the "ENTER"button to enter.

If select static IP address setting,pitch on the "Static" in the "Network configuration",

then setting up the IP,Nemask,Gateway and DNS in sequence.When the setting

complete,pitch on the "setting" and press the"Enter".

NETWORK SETTING

OSD Language

OSD Time

Closed Caption

Reset

Network Configuration

Software Upadate

Info

Picture

Sound

Function

Time

Option

Lock

Channel

STATUS WIFI LAN

MODE: LAN

IP: 172.16.67.130

DNS: 172.16.66.254

GATEWAY: 255.255.254.0

EXIT Exit

En -

Setting

IP 169. 254. 018. 061

Netmask 255. 255. 255. 000

Gateway 172. 016. 088. 254

DNS 172. 016. 064. 058

STATUS WIFI LAN

Network Configuration DHCP

Fail

Network Setting

4.If shows "Success"，the "WLAN" on the bottom right corner will turn to green from

red, and it means the network connect successfully; If shows "Fail"，

it means the network can not connect, please check whether the net wire and router

connect successfully or not.

5. Select the "WIFI" in the Network Configuration before using WIFI connecting.

STATUS WIFI LAN

Setting

Network Configuration Static

IP 172. 016. 067. 130

Netmask 255. 255. 254. 000

Gateway 172. 016. 066. 254

DNS 172. 016. 064. 081

STATUS

SSID Not Connected

Password

Network Configuration DHCP

IP 000. 000. 000. 000

Netmask 000. 000. 000. 000

Gateway 000. 000. 000. 000

DNS 000. 000. 000. 000

Scan AP

Setting

WIFI LAN

Scanning...

En -

1. Press the menu button, a menu and choose "Option",

under the Option menu select "Network Configuration"

interface for Network connection.

2. In the network interface " " " " key to switch to

WIFI connection interface.

3. Press the " " and " " key to select Scan for AP,

scanning can connect to the AP.

4. The scan is complete there will be a AP list, choose

the AP will connect, press "ENTER" key to confirm.

5. Select "Password", there will be a small keyboard,

with small keyboard input WIFI Password, input is

completed in accordance with the "RETURN" on the

keypad.

6. Press the " " " " button with each SETTING.

，

Network Setting

STATUS

SSID Not Connected

Password

Network Configuration DHCP

IP 000. 000. 000. 000

Netmask 000. 000. 000. 000

Gateway 000. 000. 000. 000

DNS 000. 000. 000. 000

Scan AP

Setting

WIFI LAN

Fail



En -

Get ready to watch thousands of TV shows and movies.

Enter your email address

1 2 3456 7 8 9 0

qwertyuiop

a s dfghjk l

z x cvbn m

@gmail.com @yhoo.com.tw @hotmail.com

!#$ @

com

Back Next

Remember Email



Email address

Need help signing in? Visit http://help.netflix.com

Internet

Press “HOME” key to enter internet interface

1. NETFLIX

Use arrow key to Select button, then press “ENTER” key to enter NETFLIX.

Input the right Email and password,

then select “ Next” button

and press“ENTER” key to login.



Use arrow button to select one video and press “ENTER” key to play.

Press “MENU” key to exit playing.

Use arrow key to browse the pages. press “MENU” key to return to main menu and

press “EXIT” key to exit.

2. Youtube

Use arrow key to Select button, then press “ENTER” key to enter Youtube.

 Use arrow button to select one video and press “ENTER” key to play.

Press key to open or close control menu when playing.

121: 478：

More Options

En -

Internet

VUDU

Discover, Watch & Collect the Latest Movies & TV

PANDORA

Welcome to pandora

Do you have a pandora account?

I have a Pandora Account

I am new to Pandora

3.VUDU

Use arrow key to Select button, then press “ENTER” key to enter VUDU.

4.pandora

Use arrow key to Select button,

Input the right Email and password,

then select “login” button and press

“ENTER” key to login.

then press “ENTER” key to enter pandora.



En -

Internet

5.Twitter

Use arrow key to Select button, then press “ENTER” key to enter Twitter.

 Input the right Email and password, then select “Authorize app” button and press

“ENTER” key to log in.

Use arrow key to browse the pages. press “MENU” key to return to main menu and

press “EXIT” key to exit twitter.

Red key: log in or log out twitter.

Green key: refresh current page.

Yellow key: write new tweet.

Blue key: Search tweet.

En -

Internet

6.Facebook

Use arrow key to Select button, then press “ENTER” key to enter Facebook.

 Input the right Email and password,

select “log In” button, then press

“ENTER” key to log in.

Press arrow key to browse the pages and press “ENTER” key to view.

Press “MENU” key to return the main menu.

Press “EXIT” key to exit Facebook.

Red key: log in or log out Facebook.

7.Accuweather

Use arrow key to Select button, then press “ENTER” key to enter Accuweather.

 Input a city or zip code press select to get the weather information.

En -

Internet

8.Screencast

Use arrow key to Select button, then press “ENTER” key to enter Screencast.

En -

Digital Media Player

This TV is embedded with one USB port digital media player. It can find the devices

support USB1.1/2.0,including flash disk, USB hard disk and digital camera. It supports

functions as: Display pictures. Play video files.

Notice:

1. In order to avoid affecting the user's viewing experience, please use the better quality

and shorter USB cable.

2. Play, preview some of the non-standard files may appear abnormal, please understand.

Explain:

1. Under the USB channel，you can use only the remote control.

2. Play Control menu to enter the playing surface to press the menu button pop-up menu

Remote Control Button

Description of Buttons:

Introduction

Buttons Function

AUDIO

Track switch (video)

Subtitle switch (video)

Play/Pause

Backward

Forward

RED

YELLOW AB Loop(Video)

Goto Time(Video)

INFO Show/Hide movie info (video)

MTS/AUDIO

HOME

7 8 9

456

1 2 3

Q.MENU

RED

INFO

YELLOW

ENTER

Motion-JPEG

Data

Picture

Video

Format

JPEG

En -

PARENTAL CONTROL

Press the MENU button on the main unit or on the remote control and then press

buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter

the LOCK menu. If used, this option feature can "block'' undesirable programming from

appearing on the TV. Parental Control offers the user a wide variety of options and

settings that restrict or "block'' the programming that can appear on the TV. Parental Control

allows the user to which program rating they consider acceptable for younger more

sensitive viewer. It can be preset and turned either on or off by the user who the

secret 4-number code, the password. The number of hours blocked are General

audiences and children blocks should be both programmed into the TV's memory. Separate

different viewer ratings are for both TV and the motion picture Industry; both rating

systems should be used and based on the ages of children.

Overview

To ensure complete coverage for all TV programs, (movies and regular TV shows) choose

a rating for MPAA, from the selections below,as well as ratings from the TV Parental

Guidelines Rating Systems below, using the Age Block option for General Audiences, and

for children.In addition, you may wish to add additional restrictions from the content block

menu, and submenus examples below.

Things to Consider before Setting up Parental Control

Determine which rating you consider acceptable to the viewer. (For example,if you choose

TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to

see: TV-PG,TV-14,or TV-MA rated programming.) You may block the auxiliary video source

entirely. (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/

VIdeo Input Jacks) or remain unblocked, then choose acceptable ratings. Block program

"Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex

Scenes,Violence Scenes or Fantasy. Violent Scenes; in Content Blk option. Select a secret

password, in the Set Password option, using the numbers keys on the remote control.Save

the password, it is the only way to access the Parental Control menu and change rating

setting, or turn off Parental Control.

• You can set different Parental Control viewing restrictions for general audiences and for

children, both can be active at the same time.

• Simply specifying one content block such as Sex Scenes, will not automatically restrict

the programming that appears from the video sources.

• Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will

automatically restrict the programming that appears from the video sources.

• You cannot disable Parental Control by disconnecting the TV from power. Block

hours will be automatically reset to the original block time setting if power is

disconnected.

En -

PARENTAL CONTROL

• Motion Picture Association of America (MPAA) Rating System

Grade Meaning

GGeneral Audiences Content not offensive to most viewers.

PG Parental Guidance

Suggested

Content is such that parents may not want their

children to view the program.

PG13 Parents Strongly

Cautioned

Program is inappropriate for preteens, with a greater

degree of offensive material suggested than a PG

rated program.

RRestricted Not for children under 17-contains strong element of

sex and/or violence.

NC-17 No children under

age 17

Not for children under 17-under any circumstances.

Contains strong sexual content.

XHard Core Films Same as NC-17 rating.

No Rating No Rating MPAA did not rate

• TV Parental Guideline Rating System

Grade Meaning

TV-Y All Children Content not offensive to most viewers.

TV-Y7 Directed to Older

Children

Considered suitable for children over 7- may contain

fantasy violence scenes.

TV-G General Audience Considered suitable for all audience; children may

watch unattended.

TV-PG Parental Guidance

Suggested

Suggested unsuitable for younger children-may

contain suggestive language, bad language, sex and

violence scenes.

TV-14 Parents Strongly

Cautioned

unsuitable for children under 14 - may contain strong

language, bad language, sex, and violence scenes.

TV-NONE

V-MA Mature

Block Unrated TV

Audience

Only

Adults only- may contain strong language, bad

language, sex, and violence scenes.

Only play with levels of TV programs, shielding no

levels of TV programs.

Canadian Rating:

Note: The V-Chlp will automatically block certain categories that are "more restrictive".If you block TV-Y

category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category,then all the

categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA).

Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+).

Canadian French is used in Quebec (G,8 ANS+ , 13 ANS+,16 ANS+, 18 ANS+)

En -

TROUBLESHOOTING

If your TV does not operate normally or cannot be turned on, please check

the following troubleshooting questions. Remember also to check any other

connected electronic device, such as DVD or Blu-ray player to pinpoint the

problem. If the TV still fails to operate normally, please contact technical support.

The TV does not operate properly

The TV does not respond

when pressing any

buttons

• The TV may freeze up during use. Disconnect the power

cord from the power socket for a few minutes. Reconnect the

power cord and try to operate it again as usual.

TV cannot be switched on

• Check that the TV is connected to the power supply.

• Make sure all connected AV devices are switched off before

switching on your TV.

The remote control does

not work

• Check to see if there are any objects between the TV and the

remote control causing an obstruction. Ensure that you are

pointing the remote control directly at the TV.

• Ensure that the batteries are installed with the correct polarity

(+ to +, - to -).

• Install new batteries.

Power is suddenly turned

off

• Check the power of the TV. The power supply maybe

interrupted.

• Check if the sleep timer is set.

• Check whether the Auto Standby is activated.

The video function does not work

No picture & No Sound

• Check whether the TV is switched on.

• Try another channel. The problem may be caused by the

broadcaster.

Picture appears slowly

after switching on

• This is normal; the image is muted during the TV startup

process. Please contact your service centre if the picture has

not appeared after minutes.

No or poor color or poor

picture

• Adjust the settings in the PICTURE menu.

• Try another channel. The problem may be caused by the

broadcaster.

• Check if video cables are connected properly.

Horizontal/Vertical bar or

picture shaking

• Check for local interference such as an electrical appliance

or power tool.

Poor reception on some

channels

• The station or cable channel may be experiencing problems;

tune to another station.

• Station signal may be weak, reposition the antenna for better

reception.

• Check for sources of possible interference.

Lines or streaks in

pictures • Check antenna (change the position of the antenna.)

No pictures when

connecting HDMI • Check if the input source is HDMI1/HDMI2 .

Pictures appear in wrong

ratio • Adjust the Aspect Ratio settings in the FUNCTION menu.

En -

TROUBLESHOOTING

The audio function does not work

Picture OK but no sound

• Press the VOL +/- buttons.

• Sound muted? Press the MUTE button.

• Try another channel. The problem may be caused by the

broadcaster.

No output from one of the

speakers • Adjust the Balance settings in the AUDIO menu.

Unusual sound from

inside the TV

• A change in ambient humidity or temperature may result in

an unusual noise when the TV is switched on or off and does

not indicate a fault with the TV.

No sound when

connecting HDMI • Check if the input source is HDMI1/HDMI2.

Audio noise • Keep the RF coaxial cable away from the other connected

cables.

Password

Lost password

• Select the SET Password setting in the LOCK menu, then

enter the following master password “1980”. The master

password clears your previous password and allows you to

enter a new password.

Maintaining

• Do not use your TV in areas that are too hot or too cold, because the cabinet may

warp or the screen may malfunction. Your TV works best in temperatures that are

comfortable to you.

• Storage temperatures are 32° to 122°F(0° to 50°C)

• Working temperatures are 32° to 95°F(0° to 35°C)

• Do not place your TV in direct sunlight or near a heat source

En -

SPECIFICATION

Panel Size 40 inch diagonally

Display Type DLED

Panel Technology TFT

Panel 60 Hz Vs. 120 Hz 60 Hz

Panel Resolution 1920x1080

Aspect Ratio 16:9

Dynamic Contrast Ratio-Panel 1000:1

Brightness (Centre Typ.) Cd/M² 200~300

Response Time (G To G) 8 ms

Lamp Life (Typ. Hours) 20,000 hours

Horizontal Viewing Angle 100

Vertical Viewing Angle 80

Wall-mount(LxW-mm) 200*200(mm)

The FCC Wants You to Know

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

or used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures: 1) reorient or relocate the receiving

antenna; 2) increase the separation between the equipment and the receiver; 3) connect the

equipment to an outlet on a circuit different from that to which the receiver is connected; 4)

consult the dealer or an experienced radio/TV technician for additional suggestions.

Any changes or not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment. Where shielded interface cables have

been provided with the product or additional components or accessories elsewhere

to be used with the installation of the product, they must be used in order to ensure

compliance with FCC regulation.

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body

En -

This Product (including any accessories included in the original packaging) as supplied and distributed in new condition,

is warranted by SEIKI (SEIKI or the Warrantor) to the original consumer purchaser against defects in material and

workmanship (“Warranty”) as follows:

PARTS AND LABOR : For a period of one (1) year from date of original consumer purchase, if this Product or any

functional part is determined by SEIKI, or a SEIKI authorized service provider, to be defective, at SEIKI’S sole option and

discretion, SEIKI will (i) repair, at no charge to the original consumer, with new or rebuilt replacement functional parts in

exchange for

provide refund of original purchase price. Replacement Product or parts are warranted for either the

remainder of the original warranty period or ninety (90) days from the date of replacement, whichever is longer. After the

applicable Warranty periods, the purchaser must pay for all parts and labor costs.

SHIPPING COSTS: Notwithstanding the foregoing, the original consumer is responsible for any shipping charges incurred

to ship the Product or part(s) to SEIKI or to a SEIKI authorized customer service provider, for diagnosis, repair, replacement

or refund. However, SEIKI will pay for return shipping to the customer. Products shipped back to SEIKI or a SEIKI

authorized service provider must be in its original packaging or in packaging with an equal degree of protection. To obtain

Warranty Service and Troubleshooting information, please call the Toll Free Customer Service Line at:

8 - -

Please have your model number and serial number available along with your of purchase.

You can also visit us online and REGISTER your new SEIKI product at:

www.SEIKI.com

To receive Warranty service, the original consumer purchaser must contact SEIKI for pre-authorization prior to sending

any Product to SEIKI or a SEIKI authorized customer service provider, or for obtaining any repair, replacement or refund

service. Proof of purchase in the form of a bill of sale or receipted invoice evidencing that the Product is within

the applicable Warranty period(s), MUST be presented to SEIKI in order to obtain the requested service.

Exclusions and Limitations:

This Warranty covers manufacturing defects in materials and workmanship encountered in the normal, non-commercial use of

the Product, and does not cover (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions,

improper installation or maintenance, alteration, accident, or excess voltage or current; (b) improper or incorrectly performed

repairs by non-authorized service facilities; (c) onsite consumer instruction or adjustments; (d) transportation, shipping, delivery,

insurance, installation or set-up costs; (e) costs of product removal, transportation or reinstallation costs; (f) ordinary wear and

to any part of the Product. In addition, this Warranty does not cover images “burnt” into the screen. This Warranty applies to the

original consumer only and does not cover products sold AS IS or WITH ALL FAULTS, or consumables (e.g., fuses, batteries, bulbs

etc.), and the Warranty is invalid if the factory-applied serial number has been altered or removed from the Product. This Warranty

is valid only in the United States and Canada, and only applies to products purchased and serviced in the United States and

Canada. All replaced parts and products, and products on which a refund is made, become the property of SEIKI.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE

SHALL APPLY. THE WARRANTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD

STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT

TO THE PRODUCT SHALL BE BINDING ON THE WARRANTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL

PURCHASE PRICE, AT THE WARRANTOR’S SOLE DISCRETION, ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. THE

WARRANTOR SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE

OR INABILITY TO USE THE PRODUCT. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY SHALL NOT EXCEED

THE PURCHASE PRICE OF THE PRODUCT. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL

CONSUMER WHO PURCHASED THE PRODUCT AND IS NOTTRANSFERABLE. SEIKI RETAINS THE RIGHT TO CHANGE THIS

WARRANTY AT ANY TIME WITHOUT NOTICE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on warranties, so

which vary from state to state.

Please send all correspondence to:

SEIKI

c/o SEIKI Customer Service

warrantyservice@seiki.com

PLEASE CONTACT CUSTOMER SERVICE TO OBTAIN SHIPPING ADDRESS FOR SERVICE.

SEIKI TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER

CHOICE FORTUNE SC-40FK700N LED TV User Manual

CHOICE FORTUNE HOLDINGS LIMITED LED TV

User Manual

Navigation menu

Namespaces

Views

Navigation