CIS Technology M400S User Manual B Certificate
CIS Technology Inc B Certificate
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 69701 |
| Application ID | gJ1JenmstGcbjyGBRkpFuA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 126.37kB (1579640 bits) |
| Date Submitted | 1999-11-14 00:00:00 |
| Date Available | 1999-12-27 00:00:00 |
| Creation Date | 1999-11-11 15:50:50 |
| Producing Software | Acrobat PDFWriter 4.0 for Windows |
| Document Lastmod | 1999-11-11 17:00:47 |
| Document Title | 穨B-Certificate.PDF |
| Document Creator | 穨Microsoft Word |
| Document Author: | 穨JACKY |
EXHIBIT C
User Manual
0,
sonoware“ Fast
Auto 10/1 00 PCI F ast Ethernet Adapter
Installation Guide
NDC Communicafions, Inc.
265 Santa Ana Conn
Sunnyvale, CA 94086, USA
Tel: +1 (408) 730-0888
Fax: +1 (408) 730-0889
Technical Support
Email: support@ndc|an.ccrm
Toll~Frce (US only): 800-6324 118
Europe and Asia Pacific
Email: wchmpi@ndc,com.tw
NDC World Wide Web
www.sohowarevcom
Www.ndclan.cnm
P/N: 85-500100—40
Rev, B1
August 1999
Table of Contents
INTRODUCTION .
FEATURES .....
WHAT YOU GET..
WHAT YOU NEED
GETTING STARTED"
HARDWARE INSTALLATION .....
SOFTWARE INSTALLATION...
F or Windows 95.
Fur Windows 98 .
For Windows NT 4. ,,,,, 12
wmhsiub'nio
UNINSTALLING THE SOHOWARE FAST ETHERNET ADAPTER ......... 16
REMOVING THE CARD .....
UNINSTALLING THE ADAPTER FROM WINDOWS 95/98 .....
If the Installatiun Fails
LfYou Want to Remove the Adapter and Driver fur Other Reasons
UNINSTALLING THE ADAPTER FROM wmvows NT 4.0 ,,,,,
LEDS
TROUBLESHOOTING
POSSIBLE WINDOWS 95 INSTALLATION PROBLEMS.
SUPPORT FROM YOUR NETWORK SUPPLIER...
SUPPORT FROM NDC....
TECHNICAL SPECIFICATIONS ..
N'DC WARRANTY ..
Auto 10/100 PCI Fast Ethernet Adapter iii
COPYRIGHT
© 1999 NDC Communicahons, Inc, All rights reserved. No part of this manual may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into
any language in any form or by any means without the written permission of NDC
Communications Inc.
TRADEMARKS
NDC and SOHOware are trademarks of NBC Communications, Inc. All other
names mentioned in this document are trademarks/registered trademarks of their
respective owners.
NDC provides this document ”as is," without warranty of any kind, neither
elqiressed nor implied, including, but not limited to, the particular purpose. NDC
may make improvements and/or changes in this manual or in the pruduct(s) and/or
the progrnrrus) described in this manual at any time This document could include
technical inaccuracies or typographical errors.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B
Digital device, purmlant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment genemtes, uses, and can radiate radio frequency enery
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. Ifthis equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
' Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
This devrce complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
I. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation
ii Aum 10/1 00 PCI Fast Ethernet Adapter
Introduction
The NDC SOHOware"'M Fast Auto 10/100 PCI Fast Ethernet Adapter supports
IOMbps and 100Mbps data transmission speeds and offers a full-duplex function
allowing 20/200Mhps on compatible hubs.
The adapter features auto-detection/negotiatinn of network speeds When connected
to a 10Base-T hub the adapter will flmfion as a lOMbps Ethernet adapter. if
connected to a looBase—TX Fast Ethemet hub the adapter fimctions at 100Mbps. On
a hub that supports full-duplex, the speed will be doubled to 20Mbps/200Mbps.
Hessiefree installation is achieved by Conforming to the Plug-and-Play standard.
Just plug m the adapter and hardware setup is done automatically.
SOHOwarem Fast is supplied with drivers for all popular network operating
systems including: Windows 95/98/NT, WFW, NDIS driver for Microsofi LAN
Manager, ODI Driver for NetWare 3.x, 44x,5,x, SCO UNIX, and a Packet Driver for
TCP/lP.
Two LED indicators provide convenient analysis of network and adapter functions
Features
' Complies with IEEE 8023 CSMA/CD, 10Ba5e—T and lOOBase—TX standards
' Supports IEEE 802.37: frame based flow control in full duplex mode
' 32-bit PCI Local Bus Mastering for high performance and low CPU utilization
Full-duplex doubles perfonnnnoe no ZOMbps/ZOOMbps
Single RJ-45 connector for 10Mbps nnd 100Mbps networks
Anto-detects/negofiates network speed
Built-in FIFO buffers
' Auto-sets IRQ and IIO address
' Supports early interrupt on transmit for increased performance
' Diagnostic software, network driver installation utility, and network drivers on
the diskette
I Two color—coded status LEDs indicate network Link, Data
Transmission/Reception, and 10 or 100Mbps data speed
Auto 10/100 PCI Fast Ethernet Adapter 1
What You Get
The package should contain the following items:
' One SOHOwarel'M Fast Auto 10/100 PCI Fast Ethernet Adapter
' One 3.5 inch diskette containing:
0 Device drivers for popular network operating systems
0 Driver support files
. Diagnostic program
I This Installation Guide
' Registration card (or go to http://www.sohoware.cvm for ou—line registration)
Register to receive free:
- Warranty protection
. Information on upcoming product releases and special product offers
- Technical suppun
What You Need
To install the SOHOwarem Fast Ethernet PCI Adapter you need the following:
' A computer with an available PCI slot
- Windows 95, 98, 0! NT CD-ROM for copying network related files during
installation
2 Aura 10/100 PCI Fast Ethernet Adapter
Getting started
Hardware Installation
Before handling the adapter, discharge static electricity from your body by touching
a grounded part ofycrur computer chassis. Then follow the steps below to install the
SOI‘IOvi/m‘e"NI Fast Adapter into your computer:
step1. Power oil“ the PC and remove the cover
Tum off the computer and all peripherals. Follow the instructions in your
PC User's guide to remove the cave: (Figure 1)
Flgure 1. Removlng the Computer Cover
stepz. Insert and secure the adapter
Select any available PCI slot and remove the slot cover. Carefully install
the adapter into the expansion slot by fimrlypressing it into the slot until the
adapfier is snugly seated. Fasten the retaining bracket with the screw from
the slot cover (Figure 2)
Figure 2. Insertan the Adapter
step3. Replace the PC cover
Replace the computer’s cover (Figure 3)
Auto 10/100 PCI Fast Ethernet Adapter 3
Figure 3. Replacing the Computer Cover
step4. Connect your PC to the network
Plug one end of the twisted-pair cable into the R145 connector on the
adapter and the other into a 10 or lOOMbps Ethernet hub or switch
(Figure 4)
Figure 4. Connecting to a Network
steps. Restart the computer
Safiware Installation
Before the SOHOwatc Auto 10/100 PCI F m Ethemet Adapter can communicate
With the network, you have to install the network driver,
SOHOWm‘em adapters are fully compatible with popular, off-the-shelf Network
Operating Systems (NOS) such as Windows 95/98/NT, Novel] NeiWare etc. You
should use the network driver supplied on the sofiwue diskette that is compatible
with your Network Operating System. A RELEASEJ‘XT file under the root
directory lists information on all the available network drivers. The network drive:
for each Network Operating System is under a separate directory. The same driver is
compatible with both lOMbps and lOOMbps networks,
For installation in Windows 95 see the following section For Windows 98, go to
page 9. For Windows NT 40 go to page 12‘
4 Anti) 10/100 PCI Fast EthernetAdapter
For Windows 95
As the installation method for the Windows 95 Versions is slightly different you
should begin by identifying your version
Right-click My Computer and click Praperties. The swam Prvaties semen will
open (Figure 5).
Check the
version
number
Figure 5. System Propertles
On the General card you will find the Windows 95 version number:
If you are using Windows 95 Version A, (400.950 or 4.00.950a) follow the steps
below. For Windows 95 Version B (4.00950 B) or later, go to page 7.
If Yau Are Running Windows 95 Version A
step1. "him on the power and start the Windows 95 operating system
Figure 6. New Hardware Found
stepZ. Windows 95 will detect the SOHOware Fast adapter and the NEW
HWdWflTE Found dialog box will open (Figun 5)
51993. Choose "Driver/ram disk pnlvided In; hardware manufacturer ” and click
OK. The Install From 137“ dialog box will open
Auto 10/100 PCI Fast ErhzrnetAdamer 5
Ax
Figure 7. Install From Disk
step4. Insert the dxivcr diskette into drive A: (or B:). Type A:\ (or B:\) and click
OK (Figure 7)
Emawr-isx-umu-u- mm:
Figure 3. Select Devica
sfep5. Choose the second option and click OK
stepG. Depending on your current installation of Windows 95, the setup program
may ask you to insert the Windows 95 CD-ROM (Figure 9).
‘l:\!4’!55,,,,,,,
Figure 9. Copying Files
step1. Type in the location ufyour Windows 95 source files (CD-ROM m- your
hard disk) and click OK
6 Auto 10/100 PCI Fast Ethernet Adam”
F guts 10. System Settlngs Change
steps. The System 52m"? Change dialog box will ask you if you want to restart
your computer (Figure 10). Remove the floppy disk and click Yes
If You Are Running Windows 95 Versian B
stem . Turn on the power and sum: the windows 95 operating system
zard-1
Flgure 11. Updfle Device Driver
stepz. Windows 95 will dam the SOHOwareTM Fm adapter and the Update
Device Driver Wizard will open (Flam 11)
step3. lnsen the dnvex disk and click Next
Figure 12. Update Devicn Dfiver WIzard-Z
Aura 10/100 PCI Fast Ethernet Adapter 7
step4. The Update Deviw Driver Wizard will indicate um Windows 95 fuund (h:
SOHOware'M Fast driver on the floppy diskette. Click Finish
(Figure 12)
igure 13. Insert
Figure 14. Copying Files
Flgure 15. Insen Dlsk
Figure 15. System Ssfllngs change
8 Aum 10/100 PCI Fast Ethernet Adapter
slep7. The System Seflingx Change dialug box will ask you ifyou want my restart
your computer (Figure 16). Remove the floppy disk from the floppy dxive
and click Yes
For Windows 93
stem . Turn on the power and start me Windows 98 operating system
Figure 17. Add New Hardware Wizard-1
stspz. Windows 98 yaill detect the SOHOwnrs Fast Map)“ and the Add New
Hardware Wizard dialog box will open. Click Next
Figure 18. Add New Hardware Wizard-2
step3. Select "Search for the best driver for yuur device ” and click Next
Auto 1 0/100 PCI Fast Ethernet Adapter 9
Figure 19. Add NW Hardware Wizard-3
step4. Insert me driver diskette into drich: (my). Check “Floppy disk drivers
Click Nm
Flgure 20. Add New Hardware Wizard-4
step5. The Add New Hardware Wizard will indicate am Windows 93 found the
SOHOwaxe Fast driver. Click Next
Figure 21 Insen Dlsk
1 I] Aura 10/100 PCI Fast Ethernet Adapter
Fluure 22. Copymg Files
Figure 23. Insert Dlsk
Figure 24. Add New Hardware Wizard-5
slaps. Click Finish to close the Add New Hardware Wizard
Auto 10/1 00 PCI Fast Ethernet Adapter 1 1
Figure 254 System Semngs Change
step7. The system will ask you to xestan your computer. Remove the floppy disk
from the floppy drive and click Yes to complete the installation
(Figure 25)
For Windows NT 4.0
stem. Double-click My Camputer. double-click Control Panel
stepz. Double-click the Network icon no open the Network window. Select the
Adapters cud (see Figure 25)
Figure 26. Network
1 1 Ann: I 0/1170 PCI Fast Ethernet Adapter
l , lr-Ll Lil l
mzwllwmlmsmllnsm
miwllllmhfipu
mzmmmwwmmmum
Figure 27. Select Network Adapter
steps. Click Add. The Select NetworkAdapwr box will open (Flgure 27)
slept Click Have disk
wmr
Flgure 28. Insert Disk
step5. Insert ("he driver diskette mm drive A: (or B:) and then type A:\WINNT40
(or B:\WINNT40) as in Figure 28
a: ler-lzlmm Baum mm:
Figure 29. Select OEM Option
steps. Click OK The Select Device dialog box will open (Figure 29). Select the
second choice and click OK
Auto 10/100 PCIFan Ethernet Adapter 13
step7. The ”P“? E‘hg’m’t ID box will open (Figure 30)
Figure 30. lnpm Ethernet ID
steps. If you want to install more Ihan one SOHOwareTM Fast adapter into this
machine, input an ID number in the same fummt as shown in Figure 30 and
click OK Ifthere is only one adapter to be installed in this machine click
Skip
The Connection Type dialog box will open (Figure 31) with a setting of
steps.
“AutoSense”
Figure 31. NBC 10/100 Fast Ethernet PCI AdapIQr {MK-A) Setup
slep104 Keep this setting unless you have a particular need to change it. Click
Help if gou want more demise Click OK
step11. The H C 10/100 Fast EthemetPC/Adapter (NIX-A) ” will now be
shown on the AdflP'E’S card in the Network cunfigurafion box
(Figure 32)
1 4 Auto 10/100 PCI Fast Ethernet Adapter
mnlmmrmmmmumn
Figure 32. Network
stem 2. Click Close
siep1 3. The System Settings Change dialog box will ask you if you want to restart
your computerl Remave the floppy disk from the floppy drive and cliek
Yes to complete the installation
Auto 1 0/100 PCI Fast Ethernet Adapter 15
Uninstalling the SOHOware Fast
Ethernet Adapter
Removing the Card
Follow the instructions below to remove the card:
stem. Remove the network cable from its connection to the SOHOware card
slepZ. Remove the card from the PCI slot
Uninstalling the Adapter from Windows 95/98
1. The installation fails or is interrupted by unhlown factors. If this happens the
NDC 10/100 FAST ETHERNETPCI ADAPTER (MX-A) Wm be mum with
an exclamation mark "1 in Device Manager. Uninstall the adapter using
Method 1 and then Restart your eomplltel
2. You want to remove the device. Follow Method 2
II the Installation Fails
Method 1.
To completely remove the adapter and driver from your system you will need to
physically remove the adapter (with the system powered eff), The removal
procedure is the reverse of the procedure on page 3. Remove it and then proceed as
follows;
step1. Double-click My Computer. Double—click Camml Panel
stepz. In Conn] Panel, double—click the system icon no open the 5375’5’”
Properties window. SEISCI the Device Manager said
16 Auto 1 0/10” PCI Fast Ethernet Adapter
F urs 33. System Fropertles
step3. Double’olick Network adapters, or click the “+” symbol to the lefi of
Network adapter:
sggp4_ Select “NDC 10/100 FAST ETHERNET PCI ADAPTER (MX-A) ” and
click the Remove button. Confirm the device removal and click OK to
reboot the PC
IfYoll Want to Remove the Adapter and Driver for Other
Reasons
Method 2.
To completely remove the adapter and driver from your system you will need to
physically remove the adapter, The removal procedure is the reverse of the
hardware installation procedure on page 34 Remove the adapter and when proceed as
follows:
step1. Doubleclick My Computer-l Double-cliek Control Panel
step2. Double-click the Network icon to open the NE’WO’k window
Auto 10/100 PCI Fast Ethernet Adamer 17
Gilliam-RM“ SM
nunmmmdhmm nmaqmm
Nblswm >mmlwmunwmmm
U’ M“ ,. l. l
mmmauw
Flgure 34. Network Configuration
steps. Select “NDC 10/100 FAST ETHERNET PCI ADAPTER (MX~A) " from
the network component list and click the Remus button Then click OK
to reboot the PC
Uninstalling the Adapter from Windows NT 4.0
step1. Double-click My Computer, Double-click ComraIPanel
stepz. Double-click the Network icon to open file Nerwork window
519,31 011 lbs Adapters tab, select "NDC 10/100 Fast Ethernet PCI Adapter" and
click the Remove button
step4. A warning box will open. Click Yes to continue the component removal
slaps. Click OK to reboot the PC
18 Auto 10/100 PCI Fast Ethernet Adapter
LEDs
The LEDs (Figure 35) provide “at-a—glance" network moniloring and are useful for
diagnostic and installation purposes.
Figure 35. LED Indicators
The functions of the LEDs are:
LINK/ACT The LINK/ACT LED When the LED is unlit, the
LED indicates whether or not the adapter is not connected to the
(Green) adapter has made a link to network or the link is not OK.
the network and the network When lit, it indicates correct
data nansmission/reoepfion link integrity. when blinldflg,
status there is network data uafiic
flowing on the network
10/100 LED The 10/ 100 LED indicates When the LED is unlit, the
(Yellow) whether the adapter is line speed is lOMbps. When
working in a IOMbps or
100Mbps environment
lit, the line speed is lOOMbps
Auto 1 0/1 00 PCI Fast Ethernet Adapter 19
Troubleshooting
Should you experience a problem with the adapter, first make sure the appropriate
driver is loaded, the proper cable is connected to the adapter port, and the hub
complies wiih the adapter specificau'cm (10ane»T at lOOBaseeTX). The LEDs
section (page 19) will provide a guide to where a problem may lie.
Possible Windows 95 Installation Problems
Windows Adopter not properly scaled Remove and reinsert the adaprer making
95 could in the expansion slot sure it is fully home
not find the l— , _ _
adamcr The driver has been loaded Remove the previous adapter driver (see
before but not removed page 9), Reboot the PC
Adapter The driver has hem 1oaded Remove the previous drivcr(s) and
not before bur not mum/ed adapter (see Uninslalling the
functioning SOHOware'M Fast Adapter, page 9) and
enrreer1y reinstall
The adapter did not install Remove the adapter and driver and
correctly reinstall
Support from Your Network Supplier
If additional assistance is required, call your SOHOware supplier for help. Have the
following information ready before you make the call.
1. LED slams
Z. A list of the product hardware (including revision levels) and, if possible, a brief
description orrhe network structure
3. Details of recent configuration changes, if applicable
4. The serial number of your SOHOware product
20 Auto 10/100 PCI Fast Ethernet Adapter
Support from NBC
If you are unable to receive support from your SOHOWal'e supplier, technical
Support is available 15mm N'DC. Conmct your nemst NDC sales office.
USA
Telephone : 1-408-7300888
Toll-Flee (US only) : 800-632-1118
FAX : 1-408-7300889
Ermail : support@ndclan.com
E umpe amlAsia Pacific
Telephone : 886-3-5783966
FAX : 886-3-5777989
E-mail : (cchsupt@rldc,com.tw
Aura 10/100 PCI Fast Ethernet Adapter 21
Technical Spec‘ '
IEEE 802.3 10Base—T
IEEE 802.3“ IOOBase-TX
IEEE 802.3): Flow Control
PC] 2.2 Local Bus Specification
Electromagnetic Standards FCC Class B. CE-Mark EN55022 Class B
Compliance (CISPR 22 Class B)
Transmission Rate IOMbps (20Mbps Full-Duplex)
100Mbps (ZOOMbps mmuplex)
32-bil PCI Bus Mastering
Single RJ—45 connector for both lOBase-T
Standards Compliance
Bus Supported
1 Connection interface
and IOOBase—TX
LED Indicators TWO LFDS indicate Link/Data
Transmission/Data Reception, 10Ml7ps or
IOOMlyps operation
110 address Assigned by system
IRQ Line Assigned by system
Cable For lOBase-T: Category 3,4,5, UTP cable.
100m (328 ii) per segment maximum.
For lOOBase-TX: Category 5 UTP cable,
100m (328 £1.) per segment maximum.
Software Support om driver for NetWaxe 3.x, 4x, 5x, NDIS
driver for Microsoft Windows 95 and
Windows 93, Windows NT, LAN Manager,
WFW, sco UNIX, and Packet driver for
TCP/IP, etc.
5V/150 mA
120 x 45 mm (4.72 x 1.77 in.)
Operatlng Temperature 0 to 55° C (32 to 131°F)
Power Consumption
Dimensions
Humidity um to 90%, (non-condensing)
Warranty Lifeu'me Limited Warranty
21 Aura 10/100 PCIFast Edm'net Adapter
NDC Warranty
Hardware
NDC (NDC Communications, Inc.) warrants its products to be free of defects in
workmanship and materials, under normal use and service, from the date of purchase
from NDC or its Authorized Reseller, and for the period of time specified in the
documentation supplied with each product.
Should a product fail to be in good Working cider during the applicable warranty
period, NDC will, at its option and expense, repair or replace it, or deliver to the
purchaser an equivalent product or part at no additional charge except as set forth
below. Repair parts and replacement products are fumished on an exchange basis
and will be either reconditioned or new. All replaced products and parts will become
the property ofNDc, Any replaced or repaired product orparthas n ninety (90) day
warranty or the remainder of the initial warranty period whichever is longer.
NDC shall not be liable under this vimrranty if its testing and examination disclose
that the alleged defect in the product does not exist or was caused by the purchaser’s,
or any third party’s, misuse, neglect, improper installation or testing, unauthorized
attempt to repair or modify, or any other cause beyond the range of the intended Ilse,
or by accident, fire, lightning. or other hazard.
Software
Software and documentation materials are supplied “as is without warranty as to
their performance, merchantability, or fitness for any particlmir purpose. However,
the diskette media containing the sofiware are covered by a 90-day warranty that
protects the purchaser against failure within that period.
Limited Warranty Service Procedures
Any product (1) received in error. (2) in a defective or non-flmctioning condition. or
(3) exhibiting a defect under normal working conditions, may be returned to NBC
by following these steps:
You must prepare:
- dated proof of purelinse
' product model number & quantity
‘ product serial number
. precise reason for return
- your name/address/e-mail address/telephonelfax
Auto 1 0/10” PCI Fast Ethernet Adapter 23
Inform the distributor or retailer
2. Ship the product back to the dism'hutnr/retailer with prepaid freight The
purchaser must pay the shipping freight from the distributnr/reimler to NDC.
Any package sent COD, (Cash On Delivery) will he refused
3, Charges: Usually RMA (Returned Material Authorization) items will be
returned to the purchaser via Air Mail, prepaid by NBC. lfretumed by another
carrier, the purchaser will pay the difference A return freight and handling fee
will he charged to the purchaser ifNDC determines that there was “Nu Problem
Faun “ or that the damage was caused by the user
Warning
NDC is not responsible for the integrity of any data on storage equipment (hard
drives, tape drives. floppy diskettes, etc). We strongly recommend that our
customers backup their data before sending much equipment ill for diagnosis or
repair.
Services after Warranty Period
After the warranty period expires, all products may be repaired for a reasonable
service charge. The shipping charges to and from the NDC facility will be borne by
the purchaser.
Return for Credit
In the case ofa DOA (Dead on Arrival) or a shipping error, a return for credit will
automatically be rpplied to the purchaser’s account, unless otherwise requested.
Limitation of Liability
All expressed and implied warranties or” a product‘s merchantability, or of its fitness
for a particular purpose, are limited in duration to the applicable period as set forth in
this limited warranty, and no Warranty will be cnnsideted valid met its exp‘hation
date.
If this product does not function as warranted, your sole remedy shall he repair or
replacement as provided for above. In nn case shall NDC be Liable for any incidental,
consequential, special. or indirect damages resulting from less of data, loss of profits,
or loss of use, even ifNDC or an authorized NDC distributor/dealer has been
advised of the possibility cf such damages, or for any eluirn by any other party.
24 Auto 10/100 PCI Fast Ethernet Adapter
For the following equipment:
Product Name : Auto 10/100 PCI Fast Emernsl Adapter
Model Number : SFA110A
Produced by:
Manulacwrer’s Name : NAT|ONAL DATACOMM CORPORATION
Manufacturer‘s Address : ZF, NO. 28, INDUSTRY EAST 91“ ROAD
SCIENCE PARK, HSIN-OHU TAIWAN, R.0.c.
is hereby confirmed to comply with me requiremenls set out in the Council Direclive
on the Approximation ofihe Laws oiihs Member Salas relating lo Eleclmmsgnetic
Compatibility (89! 3361 EEC). The product meets or exceeds the following EMC
shndards:
Generlc STD : EN 50081—11992
EN 50082-1:1992
Product Family STD : EN 55022: 1987 I CISPR: 1996
Basic STD : EN 6100044: 1995 I IEC 1000-44
IEC 801 -3
EN61000-44: 1995 I IEC 1000-44
The manufacturer/importer is responsible forihis declaralion:
Campany Name : NDC (EUROPE) co. LTD
Campany Address : 1, EARLSFORT CENTRE, HATCH STREET. DUBLIN 2,
IRELAND
Person authorized to make this declaration:
Name 1 CHIN-TU WU
Posltlonl'l'ltle : MANAGING DIRECTOR
Date Legal Signature
Aum 10/1 00 PCI Fast EthernetAdapcer 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Creator : .穨.Microsoft Word Create Date : 1999:11:11 15:50:50 Title : .穨.B-Certificate.PDF Author : .穨.JACKY Producer : Acrobat PDFWriter 4.0 for Windows Modify Date : 1999:11:11 17:00:47+08:00 Page Count : 31EXIF Metadata provided by EXIF.tools