CIS Technology R430 Ethernet Card User Manual 16745
CIS Technology Inc Ethernet Card 16745
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 16745 |
| Application ID | w2mJBPbti+Q0j8FT1UIcyA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.46kB (93287 bits) |
| Date Submitted | 1998-12-18 00:00:00 |
| Date Available | 1999-02-11 00:00:00 |
| Creation Date | 2001-07-11 13:15:08 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-07-11 13:15:13 |
| Document Title | 16745.pdf |
| Document Author: | VicodinES /CB /TNN |
EXHIBIT C User Manual 10/100 PCI Ethernet Adapter Revisuonzwemcm Product Information Sheet The PCI based adapter is a high performance 10/1OOBASE—TX Fast Ethernet PCI adapter that implementsthe 32-bit—wide and bus mastering interface. The Ethernet PCl adapter is based on the Industry Standard PCI local bus specification, revision 2.0.Itfeatures a PIug-and-Play (PnP)function. making it fully auto-configurable. The built—in Advanced Configuration and Power Interface (ACPI) allows PCI Ethernet adapter to meet the power management feature. This Fast Ethernet PCI adapter is a dual— speed adapter connected to an Ethernet network with a single connection over Unshielded Twisted- Pair (UTP) cable. The adapter automatically senses and switches to either 10 Mbps or 100 Mbps. For 100 Mbps operation, the adapter supports operation on Category 5 UTP cable. For 10 Mbps operation, the adapter supports operation onCategory 3, 4, or 5 UTP cable. Features a Realtek RTL8139A based. at Compliant with 1OBASE-T, 1OOBASE—TX specification of lEEE 802.3u standards. so Compliant with Advanced Configuration and Power Interface Specification (ACPl) Revision 1.0. o Compliant with PCI Bus Power Management interface Specification Version 1.0a. o Supports Magic Packet remote wake-up scheme. o 32‘bit bus mastering for high throughput and low processor utilization. a Single RJ-45 connector for use at either speed (Category 3, 4, or 5 UTP cable for 10 Mbps operation, and Category 5 UTP cable for 100 Mbps operation). a Automatic selection for 10 or 100 Mbps network operation. n Full-duplex operation at both 10 Mbps and 100 Mbps. o On-board socketforoptional BOOT ROM. Specifications Connectors RJ-45 U Mechanical Unit Dimensions: 120mm x 65mm Unit Weight: TBD Emission Compliance FCC Part 15 Class B CISPR 22 Class B, EN55022 Class B Operating Environmnet Temperature 0 ~ 50'C Revision: 1998, OCT 14 Model Name WS—R430 Board Layer 2 Layers Power Consumption TBD BOOT ROM Support Netware 3.x, 4.x, Windows NT LAN Manager. LAN Server Immunity Compliance IEC 801-2 (Electronic Discharge) Humidityt 10% ~ 90% (non-condensing) IEC 801-3 (Radialed Immunily) Storeage Environment Temperature: -20 ~ 80°C Humidity: 10% ~ 90% (non LED Indicators IEC 801—4 (Electrical Fast Transient/Burst) C€ —condensing) LNK (Green) Green LED will light when a good link is established, 100 (Green) Green LED will light when a good 100Mbps connection is established. Green LED will be unlit when a good 10 Mbps connection is detected, Drivers Support DOS ODI Driver - NDIS2V2.0 for DOS and 03/2 - NDIS 3.0 driver - PacketDriver - SCO UNlXDriver - Novel! NeiWare V3.11, 3.12,V4.x Server/Client Windows iorWorkgroups V3.1N3.11 LAN Manager V2,X, BANYAN VINES R552 IBM LAN ServerV3.0N4.D. 05/2 Warp SUN PC-NFS V5.X, Wollongong PATHWAY FTP PCITCF‘. Arlisofi LANiasiic V6.X Windows NT 3.51/40, Windows 95 Windows for Workgroups V3.11. Windows 98 FTP PC/TCP SCO UNIX 4.0/5.0 Diagnostic/ Driver Installation Utility tocn inrunmmiivn CNFORNAYION F0 TH" USER uzututunneuuuueengnxnkn this deViee complies with part l} of the FCC Rules Ouerntion is uhxect to the following two conditions: (ll This devlc mnv not cause harmful interference.afld (Ql This deVLce must accept an? interference receivedv including interf nce that may cause undesired nperatlan. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital ceVice Pursant to Part 15 of the FCC Rules. These limits are deSigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate r3dl° frequencr energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that intErference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recention. Which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures: ’-Reorient or relocate the receiving antenna. '—Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. __Consult the dealer or an experienced radio/TV technician for help. This booklet is available from the us government Printing Office *washington, DC 20402, Stack NO. 004‘000—00345-4. CAUTION: Any changes of modifications not expressly aPptoved by the grantee of this device could void the Users authority to operate the equipment. \" , r_.—_.__--.-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:07:11 13:15:08 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 16745.pdf Modify Date : 2001:07:11 13:15:13-04:00 Page Count : 4EXIF Metadata provided by EXIF.tools