CJ Global 72794 Wireless charger User Manual TYV 1713

CJ Global Inc. Wireless charger TYV 1713

User Manual

undesired operation.CHARGING INSTRUCTION1. Insert the AC end of the adapter into the socket, andthen insert the other end into the charger. The red LED on the charger will flash, indicang that the device is ready to charge.2. Place the mobile phone in the corresponding posion on the charger and keep it in good condion.3.When the phone is charging,the blue light keeps on. The blue light turns off for Samsung when the phoneis fully charged.for Iphone,the blue light keeps on4. When a device that does not have a wireless charging funcon is placed on the wireless charger,red light flashes. Note This device cannot be wirelessly charged.SAFETY INSTRUCTION1.Do not expose Charger to high temperature/light/Strong magnec field, or other environment like fire.2.If the device gets wet, please dry it off before further using.3.Please don’t place any other baeries or metals on the charger when it is power on. 1. Cable2. Wireless charger3. User manualUser Manual72794wireless chargerGENERAL INTRODUCTIONInputOutputDimensionsWeightEfficiency5V/2A5V/1A15.7*8.9*6.4cm71g≥ 75%Charging Distance ≤ 8mmPRODUCT COMPONENTSMicro USB InterfaceWireless Charger AeraPROTECTIONOver-current Over-voltage Over-heangIDENTIFICATION OF PARTSFCC StatementChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause IC StatementThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement

Navigation menu