CLAMCASE C52001 Blue tooth device User Manual CC Air QSG R8 v6bg

CLAMCASE, LLC Blue tooth device CC Air QSG R8 v6bg

User manual

• Turn on the ClamCase keyboard before use. ! When in tablet mode, the keyboard automatically turns o to avoid unintentional key strokes.
Manual Pairing: On your ClamCase keyboard press and hold the Bluetooth key for 5 seconds. The pairing LED will begin flashing.
ClamCase Air Keyboard
Cut Copy PasteBluetooth
ios Media Volume LockCaps LockHomeBattery Bluetooth
• Press the battery key.• The LED will flash to indicate battery life.
• Press any key to wake your ClamCase from sleep mode.• Turn your ClamCase o and then back on.• Recharge the ClamCase battery.• Re-establish a Bluetooth connection between your ClamCase and iPad.• Verify your iPad’s Bluetooth feature is turned on.
Note: The device has no ad-hoc function. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes and modifications to this equipment. Such changes and modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct eth interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
CANADAIndustry Canada Statement:This device complies with ICES-003 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this devicemust accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.Avis d’Industrie Canada:Cet appareil est conforme à la norme ICES-003 des règlements d’Industrie Canada. Sonfonctionnement est sujet aux deux conditions suivantes:1) Cet appareil ne doit pas provoquer d’interférences et 2) Cet appareil doit accepter toutes les interférences, y compris celles pouvant entra?ner son dysfonctionnement.Avis d’Industrie Canada sur l’exposition aux Rayonnements: Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contr?lé.

Navigation menu