COOTEL FONE TECHNOLOGY M32 Feature phone User Manual
SHENZHEN COOTEL FONE TECHNOLOGY CO., LTD Feature phone
user Manual
Welcome to use M32, this “Quick Start Guide” will instruct how to
use the McWiLL feature phone and demonstrate the important functions.
1. As the handset is turned off, there will be charging icon on the
interface. It means the battery is charging.
Battery and Charging Method
2. When the battery is fully charged, please disconnect the
charger.
Long press the power key, you can turn on the handset. When
the handset is on, press the power key for a few seconds, then the
power off interface is shown, the handset will be turned off.
Turn on and off
On standby interface, input the phone number directly, and
press the dial key, you could contact others. The figure is shown as
below:
Dial Interface
M32
Press the navigation key at standby interface, you can enter the
Main Menu, the figure is shown as below:
Enter Main Menu
There are 4*4 icons displayed on the Main Menu interface. They are
described as follows:
Call history CooBill Contacts Settings
File manager Wi-Fi Messaging Account
Audio player Camera Calculator Calendar
FM radio Video player Flashlight Alarm
Messages could be sent and received by GSM or McWiLL. The
figure is as below:
Messaging
Press left function key at the messaging interface, you could edit new
message.
This product supports McWiLL and GSM dual mode standby at
the same time. Please press Dual Mode settings, the figure is shown
as below:
McWiLL/GSM Dual Mode settings
Enter Main Menu > Wi-Fi, you can enable or disable the W-iFi
function. As Wi-Fi is on, the user can search the Wi-Fi hotspot and
use the internet and TCP/IP settings as input the password. The
figure is shown as below:
WiFi
Enter Main Menu>Audio Player, You can enable this function. Press the
left/right key to choose between the 4 buttons (last record
Audio Player
, next
record , pause/play and stop ) on the interface. Press the up
/down key to change the volume
. The user can press the list to check the local music list. The
audio player figure is shown as below:
Enter Main Menu > Video Player, You can open and watch the
videos. There are 2 buttons on the interface: play/pause button
Video Player
and full screen button . Users can press the left or right keys to
select the button. The figure is shown as below:
Enter Main Menu > FM radio, the user could enable the FM function.
The four buttons on the interface are: the last channel, the next
channel, play/pause and search buttons. You can press the left or
right keys to select the button. The user can press the options to
check the channel list. The figure is shown as below:
FM radio
Enter Main Menu > Account, the user can login, view account
No., logout, check the owner number, set the user name and change
the password. When login, the user can use the McWiLL service. The
figure is shown as below:
Account
Enter Main Menu > CooBill, the user can transfer, top up,
CooBill
demand, check balances and transactions. The figure is shown as
below:
TanTalk is an immediate chatting software of both sound and
text by CooTel. Enter Main Menu> Account, after a successful
login .TanTalk McWiLL account will automatically log .and the figure
is as below
TanTalk
By input right information, user could login TanTalk, and TanTalk
interface is as below:
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines
are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health. The exposure
standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted
with the phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the power
output. Before a phone model is available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the government adopted requirement for
safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value for this model phone
when tested for use at the ear is 0.743W/Kg and when worn on the body, as described in this
user guide, is 0.646 W/Kg(Body-worn measurements differ among phone models, depending
upon available accessories and FCC requirements). While there may be differences between the
SAR levels of various phones and at various positions, they all meet the government requirement
for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR
information on this model phone is on file with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/ oet/fccid after searching on
FCC ID:2AHS2-M32Additional information on Specific Absorption Rates (SAR) can be found on the
Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial
margin of safety to give additional protection for the public and to account for any variations in
measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 10mm must be maintained between the user’s
body and the handset, including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved antenna.