COP Security System 2400DK 2.4GHz Digital Wireless A / V / Data Transceiver Module User Manual
COP Security System Corp. 2.4GHz Digital Wireless A / V / Data Transceiver Module
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1754898 |
| Application ID | zIc44sQQubnGwQ5vh3T59w== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.33kB (216604 bits) |
| Date Submitted | 2012-07-29 00:00:00 |
| Date Available | 2012-07-30 00:00:00 |
| Creation Date | 2012-07-20 17:37:27 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2012-07-20 17:37:27 |
| Document Title | Microsoft Word - DAV RF module-1000622 for certification.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | RD |
MDD-24R2001 2.4GHz Digital Audio Video Modules ʳʳ ʳ Date: 2011/5/16 A. Features Operating frequency range from 2403 to 2475 MHz Maximum 25 hopping channels Maximum data rate 12 Mbps (@16QAM) 4-wire SPI interface support max. 30MHz clock rate Modulation scheme : 16QAM,QPSK The 16-bit CRC checking Hardware retransmission for packets Power supply range: 2.7 ~ 3.3V Transmission range: 250 m (Line of sight) Outline: 20.40 x 27.65 x 4.4 mm CE & FCC compliance B. Applications Digital AV Sender Digital Baby Monitor Wireless Video Door phone Security Camera Portable Video Recorder Preliminarydatasubjectstochangewithoutnotice MDD-24R2001 MDD-24R2001 2.4GHz Digital Audio Video Modules ʳʳ ʳ Date: 2011/5/16 C: Specification Parameter Min. Typ. Max. Unit 4.9 5.0 5.1 200 mA Electrical Section Supply Voltage Supply current in TX mode Supply current in RX mode 65 mA RF Section Modulation Mode Operating Frequency QPSK,16QAM 2403 2475 MHz Channel Bandwidth MHz Channel 25 channels Data Rate 3M 12M bps Transmitter Section +14 @16QAM Transmission Power 40 Power control range Power control resolution dBm +18 @QPSK dB dB Receiver Section Overlay channel spacing MHz -78 @ 16QAM Sensitivity dBm -86 @ QPSK Operation Operating Temperature -10 +60 к Storage Temperature -20 +70 к Preliminarydatasubjectstochangewithoutnotice MDD-24R2001 2.4GHz Digital Audio Video Modules ʳʳ ʳ Date: 2011/5/16 D: Pin Assignment No. Marks Function VCC Power Supply GND Ground CLK12M IRQ_N Interrupt indication for external MCU CS_N Chip Selection SDO Serial data output SDI Serial data input SCK Serial clock input RST_N Negative active reset input 10 CLK32K 32KHz clock output 12MHz clock output Model: MDD-24R2001 Preliminarydatasubjectstochangewithoutnotice MDD-24R2001 2.4GHz Digital Audio Video Modules ʳʳ ʳ Date: 2011/5/16 E: Mechanical Dimension Preliminarydatasubjectstochangewithoutnotice MDD-24R2001 2.4GHz Digital Audio Video Modules ʳʳ ʳ Date: 2011/5/16 Module User Manual The purpose of this manual is to explain correct way how to integrate module MDD-24R2001 '. to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Note that any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Integration The RF module, model MDD-24R2001 '. has to be installed and used in accordance with the technical installation instructions provided by the manufacturer. For detail information concerning type approval of this module please contact the authorized local distributor or the manufacturer. The system may only be implemented in the configuration that was authorized. USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Labeling '. for controller labeled as below. The RF module MDD-24R002 0RGHO䋺㪈㪌㪄㪉㪋㪇㪇㪛㪢 㪝㪚㪚㩷㪠㪛㪑㩷㪪㪢㪉㪄㪉㪋㪇㪇㪛㪢 The label that is placed on the module is too small to hold the required FCC information, then that information appear in the user manual for this device. In addition, the” Contains FCC ID : 6.'. O6L-MDD24R2001” label also must be placed on the outside of the end product system. Preliminarydatasubjectstochangewithoutnotice MDD-24R2001 2.4GHz Digital Audio Video Modules ʳʳ ʳ Date: 2011/5/16 This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instruction to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Preliminarydatasubjectstochangewithoutnotice
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : RD Create Date : 2012:07:20 17:37:27+08:00 Modify Date : 2012:07:20 17:37:27+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : RD Title : Microsoft Word - DAV RF module-1000622 for certification.doc Creator Tool : PScript5.dll Version 5.2.2 Document ID : uuid:204104bf-c418-4e09-8149-fc25134563e4 Instance ID : uuid:63a7041e-92d1-4ec7-89e0-14c9f5299fa8 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 6EXIF Metadata provided by EXIF.tools