COSHIP ELECTRONICS 2008011602 Digital TV Set Top Box User Manual manual

COSHIP ELECTRONICS CO., LTD. Digital TV Set Top Box manual

Users Manual

Dragon Media                          Setup & User Guide 1  Content Chapter 1 Basic Care and Instructions................................................................ 2 Chapter 2 System Tour of N8608I-AW ................................................................. 4 2.1 Front View............................................................................................. 4 2.2 Back View............................................................................................. 5 2.3 The Remote........................................................................................... 6 Chapter 3 Initial Use of N8608I -AW ..................................................................... 9 3.1 Checking List ......................................................................................... 9 3.2 Connection.......................................................................................... 10 3.3 Power On............................................................................................ 10 Chapter 4 System Management.........................................................................11 4.1 User Logi n............................................................................................11 4.2  Basic Settings ...................................................................................... 13 4.3 Network Configurations.......................................................................... 13 4.3.1 Static IP...................................................................................... 13 4.3.2 DHCP Settings ............................................................................ 14 4.3.3 Wireless Network Settings.............................................................. 14 4.4  PPPOE Settings ................................................................................... 16 4.5  Advanced Settings ................................................................................ 17 4.6  Back to Home Menu.............................................................................. 17 Chapter 5 Input Methods................................................................................. 17 5.1 Letters................................................................................................ 18 5.2 Numbers............................................................................................. 18 5.3 Soft Keyboard...................................................................................... 18 Chapter 6 Upgrade of STB............................................................................... 19 Chapter 7 EPG Login ...................................................................................... 20 7.1  Initial User Password............................................................................. 20
Dragon Media                          Setup & User Guide 2 Chapter 1 Basic Care and Instructions FCC ID: This device complies with Part 15 of the FCC Rules.  Operation is   subject to the following two conditions:  (1) this device may not cause   harmful interference, and (2) this device must accept any interference   received, including interference that may cause undesired operation. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.  In order to avoid electric shock, please do not open the box by yourself.  Place this product on a steady, level and clean surface. Do not cover the intakes.  Keep it far away from heat. Do not expose it to direct sunlight. Do not put combustible things on it, such as burning candles.  Do not put it near any equipment that might cause electromagnetic or electric field.  Keep it in dry environment. Do not spill water or any liquid on the box. If liquid flows into it, please turn off power immediately and contact our technical maintenance staff.  Never place objects on top of the box to avoid damaging the STB. 带格式的: 正文, 缩进: 首行缩进:  2 字符, 定义网格后不调整右缩进, 段落间距段前: 0 磅, 段后: 0 磅,不调整西文与中文之间的空格, 不调整中文和数字之间的空格带格式的: 字体: (中文) 宋体, 10 磅, 下划线, 字体颜色: 红色
Dragon Media                          Setup & User Guide 3  Please pull out power plug if it is not to be operated for a long period. Do not use damaged power cord. Please contact technical maintenance staff for changing new power cord.  Please pull out the power plug  during thunder storm.  Stop operation immediately and switch off the power and pull  out the power plug, if such malfunction occurs like smoking, abnormal sound, bad smell, etc.    When cleaning the  exterior, please switch off the unit and pull out the power plug. Do not operate with wet hands. Use  a damp cloth moistened  with water and soft detergent for cleaning. Do not use chemicals cleaners like benzene, alcohol, gasoline, etc.
Dragon Media                          Setup & User Guide 4 Chapter 2 System Tour of N8608I-AW 2.1 Front View     STANDBY          ENTER/OK  ARROW BUTTON – LEFT       MENU  ARROW BUTTON – RIGHT         USB PORTAL   ARROW BUTTON – UP       REMOTE RECEIVER  ARROW BUTTON - DOWN           LED DISPLAY
Dragon Media                          Setup & User Guide 5 2.2 Back View     WIFI Antenna Portal            FCC Mark   Y-Pb-Pr Output        S  Video   Right Audio Channel Output         S/P DIF Portal   Video Output         10/100 Base-T Rj45 Port   Left Audio Channel Output        Power Jack   Bar Code         Safety Indicator     带格式的: 字体: 非加粗删除的内容: 删除的内容:   S  Video删除的内容:   S/P DIF Portal删除的内容:   UL Mark删除的内容:   10/100 Base-T Rj45 Port删除的内容:   Power Jack删除的内容:   Safety Indicator删除的内容:   FCC Mark
Dragon Media                          Setup & User Guide 6 2.3 The Remote
Dragon Media                          Setup & User Guide 7  Function buttons for remote control of TV set:   Blue key is the power of TV set  VOL +/ -: Control the volume of TV set SETUP: Setup TV parameters  TV/AV: Switch between TV and AV  GO TO:Skip to specified position while playing    REW, FFWD, PLAY/PAUSE, STOP: Fast rewind, fast forward, play/pause, stop    HOME: Back to the home menu    Arrow buttons of Up, Down , Left, Right and “OK”    EXIT: To exit, cursor navigation button  GUIDE: Program navigation button    VOLUME +/-:   Increase or decrease Volume  Red, Green, Yellow, Blue  buttons: Shortcut keys with special purposes: Red Button – Switch to VOD menu  Green Button – Switch to TV channel menu Yellow Button – Switch to feature channel menu Blue Button – Switch to hot recommendation menu  0--9: Number keys    -/--: Switch input methods     STANDBY: Standby
Dragon Media                          Setup & User Guide 8  MUTE: Muting   SETUP: Enter system settings     AUDIO: Switch left and right audio channels  BACK: Go back to previous  page  INFO: Information-prompting of current page   Page Buttons: PgDn – Page Down, PgUp – Page Up;  Soft Keyboard: Open or close soft keyboard  DELETE: Clear one character    Notes: 1. Fast forward, back forward, pause and timing can not be applied to live and roll broadcasting programs.  2. Press “STANDBY” (on the front panel of STB) when STB is down abnormally.  3. As every step of the operation reads data from network, please be patient and wait for 2 seconds after pressing the keys. Do not press continually during fast forward or fast rewind
Dragon Media                          Setup & User Guide 9 Chapter 3 Initial Use of N8608I-AW This chapter gives you detailed information on using N8608I-AW STB for the first time. After finishing this chapter, you will be able to order programs through IP network.    Contents in this chapter: l Checking List l Connection l Power On  3.1 Checking List Components Quantity N8608I-AW IP Set Top Box  Unit 1 Power Adapt er 1 User Manual 1   Audio / Video Cable 1   RJ45 Network Cable 1   The Remote   1   The Antenna 1 AAA Battery 2
Dragon Media                          Setup & User Guide 10 3.2 Connection cable  3.3 Power On Follow the below steps to power on the N8608I -AW  STB and TV set: (1) Insert the power plug of  N8608I-AW  STB to nearby power socket (2) Make sure that the power connection of TV set is correct   (3) Switch on the powers on both TV set and back panel of STB. The indicator light on the front panel of STB is on now, which shows the  STB is working now (4) Change to A/V mode on  TV set  (5) You can connect wireless antenna to ‘antenna’ as shown in above picture if you use wireless network  Notes: Press  “STANDBY” key on the remote to reset the box if the  STB is down. If this is useless, turn off the power on the back panel  of STB and restart.       删除的内容: 删除的内容: 删除的内容:
Dragon Media                          Setup & User Guide 11  Chapter 4 System Management This chapter will tell you the system management operation of N8608I-AW. All instructions refer to the remote of N8608I-AW if there is no special instruction. After start-up successfully, STB will enter the beginning screen as show in Picture 4-1:  Picture 4-1 Beginning Screen 4.1 User Login Press “SETUP” key for system settings after entering the main menu. The initial default system password is 123456. Below is the screen of login, Picture 4-2:  Picture 4-2 Login Screen  Modify the password as shown in Picture 4-3:
Dragon Media                          Setup & User Guide 12  Picture 4-3 Modify Password  System management functions provided by N8608I -AW include:  l Basic Settings  l Network Settings  l PPPOE Settings  l Advanced Settings   System management screen as shown in Picture 4-4 below:  Picture  4-4 Front Screen of Settings    Notes: Ø Make modifications (except advanced settings) with the guidance of technical professionals! Ø Pictures in this chapter are for reference only.  Screen displays  change with different versions of software.  Ø The system settings of N8608I -AW apply for most of the status, and no need to
Dragon Media                          Setup & User Guide 13 make any change to system settings. Basic settings are used for ISP maintenance staff in special application.   4.2 Basic Settings Basic settings are used by ISP maintenance staff.  You don’t need to make any basic settings. Press “EXIT” on the remote to exit basic settings page. See Picture 4-5:  Picture 4-5 Basic Settings  4.3 Network Configurations It is easy to modify and manage the internet access mode by network settings functions provided by N8608I -AW. Choose network configurations on the left of the settings page.  4.3.1 Static IP   Choose “Cable network” ? Choose  “Static IP” in connection mode  ? Setup IP address, subnet mask,  gateway address, DNS address, then press “OK” to save the parameters. Press “EXIT” to exit current setting page. See Picture 4-6 (Note: Please make sure the IP address is correct):
Dragon Media                          Setup & User Guide 14  Picture 4-6 Static IP Settings  4.3.2 DHCP  Settings Choose “Cable Network” if there is DHCP server ? Choose “Dynamic” in connection mode ? Press “OK” to save the  parameters. Press “EXIT” to exit current setting page. See Picture 4-7 below:    Picture 4-7 DHCP Settings 4.3.3 Wireless Network Settings Choose “Wireless Network” if there is wireless network ? Configure  wireless  network settings.   Both static and dynamic mode can be chosen as connection. Press “OK” to save. Press “EXIT” to exit current setting page. See Picture 4-8 Wireless Static IP Settings. If someone has set up wireless network for you, and created the WEP key, you have to contact with this person and get the secret key. Follow below procedures for configuration:
Dragon Media                          Setup & User Guide 15   Param eters:   SSID Number: Wireless Network Number   Encryption: Encryption for wireless use   Secret Key Format: Format of secret key    Secret Key: The secret key for connecting wireless network   1. Enter SSID (Wireless Network Name), and follow below steps to help you find out your own SSID ●First open your PC or notebook connected by wireless network and wait until the completion of the start up of windows system. There will be an icon like a computer on the  bottom right corner next to the time display. Double click the icon.   ●Choose to check the wireless network status ●Get your SSID   2. Choose Encryption:  Move to “Encryption” by arrow keys, then press “OK”. Press “UP” or ‘DOWN” to choose and press “OK” to open the option list. There are 3 ways for secret key: no secret key, WEP and WPA-PSK encryption.   3. For WEP key , please choose  “Encryption Format ” by arrow keys, then press  “OK” to open option list. Move “UP” or “DOWN” and press “OK” to choose. There are 4 secret key formats:  “ASCII Code”,  “HEX”. Choose  “ASCII Code” if your secret key is  in character, and “HEX” for others.   4. Enter the key: Move by arrow keys to the secret key input column and enter the key. Please note: “ASCII” is case sensitive. If you are using a HEX key, the key must be entered in all capitals.   5. Choose Static or Dynamic for connection mode to set up for static IP and DHCP. Press “OK” to save. Press “EXIT” to exit current setting page.
Dragon Media                          Setup & User Guide 16  Picture 4-8 Wireless Static IP Settings   Dynamic settings as below:  Picture 4-9 Wireless DHCP Settings  4.4 PPPOE Settings Choose PPPOE Connection, “Yes” or “No” ? Enter correct user ID and password ? Press “OK” to save. Press “EXIT” to exit current setting page. See Pic ture 4-10.  Picture 4-10 PPPOE Settings
Dragon Media                          Setup & User Guide 17 Notes: Static IP and DHCP settings cannot be sued after PPPOE settings. 4.5 Advanced Settings Choose “A dvanced Settings” on the left of setting menu, then press “OK” to save after advanced settings. Press “EXIT” to exit current setting page. See Picture 4-11 (please make a careful choice of “Restore to Default Factory Settings” and “Clear Cookies”) . You don’t need to configure advanced settings. Default factory setting is OK. Please contact ISP service provider for help if you need any modification:  Picture 4-11 Advanced Settings  4.6 Back to Home Menu Press “Home Menu” on the left of the setting page or press “HOME” key to go back to Home Menu. Chapter 5 Input Methods Set Top Box N8608I-AW provides 6 Input Methods: Pinyin (no tones), Numbers, Capital Letters, Initial Capital Letters, Lowercase and Soft Keyboard. Numbers input method is default. Press input method key “-/--” for once or more to choose other input methods . Input methods icons are shown as below:
Dragon Media                          Setup & User Guide 18      5.1 Letters Change to the mode of Letters by “-/--” key, as is shown on the remote. Symbols are on the key “1”, and 3-4 letters on each other number keys. You need to press one key for once or more to get the right letter on it. For example, the letter “n” is on the key “6”, the second letter on it. So you have to press “6” for twice, then the letter “n” will be on the textbox. And so on.   5.2 Numbers Change to the mode of numbers by “-/--” key. The numbers you choose will be shown in the textbox. 5.3 Soft Keyboard Change to the mode of Soft Keyboard by pressing the key “Soft Keyboard”. Control by the remote, and input the letters, numbers or symbols you need. Switch  capital, lowercase letters and symbols by the key “Shift”.  Switch capital and lowercase letters by the key “LOCK”. Move the soft keyboard position by “CTRL” and direction keys.
Dragon Media                          Setup & User Guide 19 Chapter 6 Upgrade of STB STB N8608I -AW has an auto upgrade function built in. It will check the new version software package  while booting after you set the update address. Please make sure about below two points in upgrading:   (1) Do not cut off of the power of STB; (2) Network cable is well connected and functions. When the STB detects the upgrade software package, upgrade starts as Picture 6-1 shown below:  Picture 6-1 Upgrade Download  Successful upgrade. See Picture 6-2.  Picture 6-2 Successful Upgrade  Completed  After successful upgrade is totally completed ,  STB will reset automatically and go to the home menu (as long as the network is well connected). There may be some abnormal situations during the upgrade due to different factors. Please
Dragon Media                          Setup & User Guide 20 restart the STB if it cannot work normally.   Chapter 7 EPG Login 7.1 Initial User Password   You will see above  picture when you first enter the  EPG  home menu. Initial default registration ID and password are the last 6 bits of the bar code on the back of STB. For example: STB Serial No. EPG Default User EPG Default Password 00010100011086800743000E0950DBE4 50DBE4 50DBE4  With correct ID and password, you can go to EPG home page for ordering programs as below:  带格式的: 字体: (中文) 宋体带格式的: 字体: (中文) 宋体带格式表格

Navigation menu