CRAFTSMAN Level Manual L0810447
User Manual: CRAFTSMAN CRAFTSMAN Level Manual CRAFTSMAN Level Owner's Manual, CRAFTSMAN Level installation guides
Open the PDF directly: View PDF .
Page Count: 20
Download | |
Open PDF In Browser | View PDF |
LASE GUHDED _OOL with LASE EASU Model No. 320.48252 CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product. o SAFETY o OPERATION • MAINTENANCE • ESPAI_OL, PAGINA 11 Sears, Roebuck and Co., Hoffman Estates, iL 60179 U.S.A. Warranty. ................................................................................ Page 2 Safety Instructions ............................................................... Pages 2-3 Description ............................................................................. Page 3-4 Operation ........................................................................... Pages 5-7 Maintenance Page 7-8 Trouble Shooting .................................................................... Page 8 Notes ...................................................................................... Service Numbers ................................................................... Page 9-10 Back Cover .......................................................................... ONE FULLYEAR WARRANTY ON CRAFTSMAN TOOL tf this Craftsman Tool fails due to a defect in material or workmanship within one year from the date of purchase, RETURN ITTO THE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge. If this Craftsman Tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase° This warranty gives you specific legal rights, and you may also have other rights which vary from state to state., Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179 SAVE THESE RNSTRUCTIONS! READ ALL INSTRUCTIONS! /_ WARNING: BE SURE io read and understand all instructions in this manualexposure, before using this product.Failure to follow all instructions may resuIt in hazardous radiation _ may CAUTION: DO NOT attempt to modify the performanceof this laser device in any way. This result in a dangerous exposure to laser radiation_ I of_an CAUTION: eye hazard. The use of any optical instrument with this product will increase the possibility IMPORTANT: The following label is on your tool,. It indicates where the laser light is emitted. ALWAYS BE AWARE of its location when using the ultrasonic measuring tool, ALWAYS MAKE SURE that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser, LAS£R ,_ RADIATION DO NOT STARE _k 2J:¢_ INTO BEAM _040.,_ ==xl |040.11 J^_,,_,,,,,_.tl_w_nr_uu_l LASER LIGHT. LASER RADIATION Do Not Stare into beam. Class ilia Laser Product Avoid Direct Eye Exposure. 1. DO NOT remove or deface any product labels,, Removing product labels increase the risk of exposure to laser radiation, 2. DO NOT stare directly at the laser beam or project the laser beam directly into the eyes of others. Serious eye injury could result. 3. DO NOT place the ultrasonic measuring tool in a position that may cause anyone to stare into the laser beam intentionally or unintentionally° Serious eye injury could result° 4. DO NOT use any magnifying optical tools such as, but not limited to telescopes or transits to view the laser beam. Serious eye injury could result,, 5. DO NOT operate the ultrasonic measuring tool around children or allow children to operate the tool. Serious eye injury, could result° 6. ALWAYS use only the accessories with this product. that are recommended by Sears for use 7. Keep the tool dry and do not place in direct sunlight, 8. ALWAYS turn the tool off when not in use, KNOW YOUR TOOL This laser guided measuring tool is used for measurement of distance., It emits a laser beam which projects a visible spot (_ on the target surface_ The tool generates ultrasound to permit easy floor to ceiling and wall to wall measurement. Use to measure distances to the object, calculate area in square feet and volume in cubic feet. Fig. 1 2 _1 1, Ultrasound Sensor Aperture 2_ Laser Aperture 3. Back-Lit LCD Display screen 4, Feet / Meter Conversion Key 5, Area / Volume Computation Conversion Key 6, Addition Computation Key Of Two Distances 7. Read Key 8. Single Distance Measurement Key 9o Recall Key 10, Power Key 11, Horizontal Bubble Indicator Fig. 2 L: Length W: Width O.'OO" H: Height Sq-ft: Square Feet Cu-ft: Cubic Feet IZ.I.I:t#_ m sq-ft cu-ft 0.!3!30'1T# L_" m' tJ IJ 0 0, iZi, iZi m m' m2: Square Meter m_: Cubic Meter TECHNICAL Recommended Measurement use range SPECIFICATIONS indoor 2 to 50fro (0.6-15meters) 99.5% Accurate + / - 015% + / - 1 digit Aperture Angle Approximately 5 degrees Class Ilia Maximum power output <_2,5roW H,,,. ,, i ii I. ..... Power Supply One 9-volt battery (not included) IH Optimum Operating Temperature Range .,,.,, 32 ° to 104 ° F (0 ° to 40 ° C) 4 TOINSTALL BATTERY (See Figure 3) NOTE: This tool operates on one 9-volt battery (not included). 1. Open battery compartment door on the back of tool 2. Plug 9-vott battery into the battery conductor, 3. Close battery compartment door_ IMPORTANT NOTE: When the battery is low, the low battery [_ will be continuously displayed on the upper left side of the LCD display screen, HOWTO USE LASER GUIDED MEASURING TOOL Place the bottom of the tool at the point from which the measurement is to begin (such as a wall or floor), The built-in level vials will help you to align the tool at 90°., The ultrasonic signal is projected in circular waves (see Fig. 4). For tong distance measuring, between 40 to 50 feet (12 to t5 meters), the target area should not be smaller than 10 x 10 feet (3 x 3 meters) Fig, 4 Bottom J J IMPORTANT NOTE: 1. In order to get the most accurate result, make sure the ultrasonic wave is perpendicular to the target,, 2. The target area must be a hard regular surface with no objects or obstacles in the measured field 3, Place a piece of cardboard on front of the target if the measured target is small, irregularor soft_, 4. This tool cannot be used to measure through glass, even though the laser beam can pass through 5. All measurements are calculated from the bottom of your tool (as shown in Fig, 4) HOWTO READYOUR LASER GUIDED MEASURINGTOOL 1. Press the power key and the LCD display screen will show the temperature in degrees Fahrenheit, 2. Point the tool perpendicularly at the target and get the measurement by pressing the "Read" key, 3o Each measurement erases the previous one. 4. The measurement was unsuccessful if "Err" appears on the LCD display screen 5_When "Err" appears on the display screen, press "Read" key or re-start the tool to measure again, making sure to avoid the following conditions: ,, The target surface does not provide a good reflection for the ultrasonic measuring signal (e i.,it is a soft, irregular surface such as thick carpet, curtains, or irregular wallpaper, etc) oThe distance measured is out of the specified measuring range (2 to 50 feet),, o There are obstructions within the specified measuring range° =The tool is not perpendicular to the target 6. The tool automatically turns off, if not used for 30 seconds, 7o Measurements can be ready easily even in dark conditions due to the back-lit LCD screen. IMPORTANT NOTE: in order to get accurate measurements, always be sure to point the tool perpendicularly to the target before starting any measurements, 5 HOW TO MEASURE 1.Turn on power by pressing the power key (see Fig° 5)_The temperature of the area will be shown on the LCD display screen (see Fig 6)_The tool can also be used as a thermometer, The temperature display will disappear within 30 seconds° Fig, 5 Fig. 6 HOWTO MEASURE cont. 2, Select the measurement unit°. A. Press FT!M button to show measurement between feet and meters B. The unit will be shown on the LCD display screen (see Fig, 7), lOOm 3. Choose the measuring mode and read. Measuring a single distance: A. Press single distance key "t-----t", B. Press "Read" key to get measured distance (see Fig. 8) C, Press "Read" key again to get new measured distance_ D, Press "Recall" key and the latest measured distance will be shown on screen MEASUREMENT OFTWO DISTANCES AND COMPUTING THEIR SUM 1. Press "HH" key 2. The left blinking line in "_----" shows the first Fig, 9 measurement to be taken (see Fig 9), 3. Press "Read" key to get the measured distance (see Fig. 9), 4. The right blinking line in "__" shows the second measurement to be taken, 5. Press "Read" key to get the second measured distance shown in the upper row, The sum of the two measurements will immediately show Fig. 10 at the bottom of the screen (Fig° 10) 6, Press "Recall" key and the first measurement will blink in the upper row Press "Recall" key again and again and the two measurements wilt blink in the upper row circularly NOTE; When measuring large distances that are beyond the capability of the tool, measure from the middle point of the distance to both sides and add their values using the "t--Ill" key_ 6 COMPUTING AREA 1,Position tooltomeasure arealength 2.Pressthe,,,_:__//(__ I,,key,theblinkinglinein,,z_:__ ,, meansthelengthtobemeasured (seeFig.11),, 3. Press"Read"keytodisplaythemeasured lengthinthe upperrowofthescreen; thewidthlinein "_" will also Fig, 11 start to blink,, 4. Position tool to measure area width_ Press "Read" again to display the measured width in the upper row of the screen and the area will immediately be displayed in the lower row (see Fig, 13). 5. Press the "Recall" key and the measured length will blink in the upper row,,Press again to see the measured width_ Fig. 13 6. Press "Read" key to make a new measurement, 3'00" _ eq.tt COMPUTING VOLUME 1. Position tool to measure area length 2. Press the "_/__,J "key twice to show" @" on the display screen_ The blinking line in" @" means the length to be measured (see Fig° 14a)., 3. Press "Read" key to display the measured length in the upper row of the screen; the width line in" (_" will also start to blink (see Fig. t4b). 4, Position tool to measure area width., Press "Read" again to display the measured width in the upper row of the screen (see Fig. 14c).The height line in" _l_jl" will also start to blink° 5. Position tool to measure area height., Press "Read" again to display the measured height in the upper row of the screen. The volume will immediately be displayed in the lower row (see Fig. 14d) Fig. 14a Fig. 14b 2'00" Fig. 14c 3'00" 6. Press the "Recall" key and the measured length will blink in the upper row, Press again to see the measured width., Press again to see the measured height, 7, Press "Read" key to make a new measurement, Fig. 14d 4'00" 24 _° This tool has been designed to be a low maintenance tool, However, in order to maintain its performance, you must always follow these simple directions, 1. ALWAYS handle the tool with care. Treat it as the fine optical device it is Treat it as you would a camera or binoculars,, 2. 3. 4. 5. AVOID exposing the too! to shock, continuous vibration or extreme hot or cold temperatures,. ALWAYS store the tool indoors.When not in use, ALWAYS store the tool in its protective case ALWAYS keep the tool free or dust and liquids° ALWAYS clean and thoroughly dry the tool after each use. 7 6. Check the batteries regularly to avoid deterioration. ALWAYS remove the batteries from the tool, if it is not going to be used for an extended period of time 7. Replace the batteries when the low battery icon is continuously displayed on the LCD. 8. DO NOT disassemble the tool This will expose the user to hazardous radiation exposure, 9. DO NOT use the tool in noisy conditions, especially if the frequency of the noise is about 40 KHz 10_ DO NOT attempt to change any part of the laser lens_ ,, ,,, ,,,,,,,,, PROBLEM In accu rate measurement CAUSE SOLUTION Battery runs out. Replace with fresh battery_ Measured distance is out of the specified range (2 - 50 feet / .06 to 15m) Adjust the distance to be within the specified range. The tool is not held perpendicularly to the target° Hold the tool perpendicularly the target. The tool was moved during the measuring process. Do not move and re-measure,, i, Err appears on the screen i .i H., HH,,, J, ,,,,, ,, ,,,i,,,i Cover the target surface with cardboard or plywood, The target surface does not provide good reflection for the ultrasonic pulse (i,,e,,soft and irregular surface such as thick carpet, curtain or irregular wallpaper, etc.). ............ , • The target surface does not provide good reflection for the ultrasonic pulse (ioeosoft and irregular surface such as thick carpet, curtain or irregular wallpaper, etc,). Cover the target surface with cardboard or plywood_ Obstructions are within the sound range,, Remove the obstructions .......... The tool is not held perpendicularly to the target, to away .,, i,,uiu Hold the tool perpendicularly the target. i,i L.lUHL,"U"J" to NOTES % NOTES 10 Manual del Usuario AM TA E GUHADA PO LAS COn TRAC MR Modelo No. 320.48252 ATENCION: Antes de usar este producto, lea, comprenda y siga todas ias reglas de seguridadv las instrucciones de funcionamiento incluidas en este manual. Sears, Roebuck and Co., Hoffman ° SEGURIDAD • FUNCIONAMIENTO o [vIAINTENIMIENTO Estates, IL 60179 U.S.A. Garantfa ............................................................................. P_.glna Instrucciones P&gmas 12-13 de Seguridad .............................................. 12 Descripci6n ........................................................................ P#,gma 13-14 Funcionamiento ............................................................. P_,gmas 15-17 Mantenimiento ................................................................... P,_glna 17-18 Soluci6n de Averfas ........................................................... Pb.gtna 18 Notas .................................................................................. P_.gma 19 Nt_meros de Servicio .......................................................... Contraportada GARANTIA COMPLETA CRAFTSMAN DE UN A|;'_ODE LA HERRAMIENTA Siesta herramienta Craftsman no le otorga compteta satisfacci6n dentro de un aSo de la fecha de compra, DEVUELVALA AL ALMACEN SEARS MAS CERCANO EN LOS ESTADOS UNIDOS y Sears la reempIazar_, gratuitamente.. Siesta herramienta Craftsman se usa para propSsitos comerciales o de arriendo, esta garantfa es vdlida solamente durante 90 dfas desde la fecha de compra_ Esta garantfa le otorga derechos legales especfficos y usted adem&s puede tener otros derechos que varfan de un estado a otro. Sears, Roebuck and Co., Dept.. 817 WA, Hoffman Estates, IL 60179 iCONSERVE ESTAS INSTRUCCgONES! iLEA TODAS LAS INSTRUCCJONES! Z_ ADVERTENClA: Antes de usar este producto ASEGURESE de leer y comprender todas las instrucciones incluidas en este manual. El incumplimtento de todas tas instrucciones puede resultar en exposici6n peligrosa a radiaciSn,. l dispositivo Z-_ ATENCION: I&ser..Esto podri'a NO trate resultar de modificar en unade exposici6n ninguna peligrosa manera elarendimiento radiaci6n I_.ser. de este l lposibitidadde z_ ATENC'ON: sufrir una El ,esi6n us° deocular_ cualquier instrument° 6ptic° c°n este pr°duct° aumentara la IMPORTANTE: La etiqueta siguiente ha sido colocada en su herramienta, lndica el lugar por donde se emite la luz Idser. SIEMPRE ESTE CONSClENTE de su ubicaci6n cuando use la herramienta de medir ultras6nica. SIEIVIPRE ASEGURESE de informar a cualquier espectador que se encuentre en la vecindad de uso acerca de los peligros inminentes ai mirar directamente el l_ser. 12 J [,& ADVERTENCUAI LUZ LASER. RADIACION LASER Evite exposici6n directa de los ojos. No mire fijamente el rayo I_iser. Producto Laser de la Clase Ilia 1. NO retire ni deteriore ninguna de las etiquetas del producto, Si se retiran las etiquetas del producto se aumenta el riesgo de exposiciSn a radiaci6n laser 2. NO mire directamente al rayo laser ni apunte e! rayo laser directamente otras personas. Se puede causar una lesi6n ocular grave,, a los ojos de 3. NO cofoque la herramienta de medir ultrasSnica de manera que alguna persona pueda mirar intencional o accidentalmente ef rayo laser° Se puede causar una lesiSn ocular grave. 4. NO use ninguna herramienta 5ptica de aumento tal como, pero sin limitar, telescopios ni teodolitos para ver el rayo laser. Se puede causar una lesiSn ocular grave,_ 5. NO trabaje con la herramienta de medir ultrasSnica cerca de los niSos ni permita que los niSos usen la herramienta, Se puede causar una lesiSn ocular grave,, 6. SIEMPRE use solamente este producto. 7. Mantenga los accesorios por Sears para usar con la herramienta seca y no la coloque en ta tuz directa del sol 8. SIEMPRE apague _a herramienta CONOZCA recomendados con no est_ en uso_, SU HERRAMIENTA Esta herramienta guiada por laser se usa para medir distancias. Emite un rayo laser que proyecta un punto visible (_ en la superficie dee obietivoo La herramienta genera uJtrasonido que le permite medir fAcilmente del piso aFcielo raso y de pared a pared, Se utiliza para medir distancias hasta et objetivo, caicular superficies en pies cuadrados y volumen en pies cL_bicos. 13 Fig. 1 2 1, Abertura del Sensor de Ultrasonido 1 2, Abertura del L_ser 3. Pantalla de Visualizaci6n de Cristal Liquido (LCD) 4. Tecla de ConversiSn de Pies/Metros 5, Tecla de Conversi6n de Superficie/Volumen 6. Tecla de Cfilculo de Adici6n de Dos Distancias 7. Tecta 'Read' (Lectura) 8, Tecla de Medici6n de Una Sola Distancia 9, Tecla 'Recall' (Recuperaci6n) 10, Tecla 'Power' (Encendido) 11. tndicador de Burbuja Horizontal Fig, 2 L: Largo W: Ancho H: Altura cu4t 8888:8.82 m, m_ Sq-ft: Pies Cuadrados Cu-ft: Pies Cubicoc m_: Metro Cuadrado m3: Metro C,3bico ESPECIFICACIONES USO rec0mendad0 En el interior : : ,,,,,,,, ,,,,,,,,,,,,,, ...... ,,,,,,,,,,,,, ................. ......................................... ....................... Limite de medici6n ..................... TECNICAS 2" a 50" (0,6 - 15 metros) ,.... 99.5% exactitud ...... t +/" 0'5% +/' 1 digito E --A--ngulo de Abertura Apr0ximadamente 5 grados Clase llla Potencia maxima de salida: _<2,5mW ...... Su"minis'i'ro de En"ergia Una pila de 9 voltios (no se incluye) L[mite Optimo de Temperatura de Operaci6n 32 ° a 104 o F (0 ° a 40 ° C) 14 INSTALACION DE LA PILA (Ver Figura 3) NOTA: Esta herramienta funciona con una pila de 9 voitios (no se incluye). 1, Abra la tapa del compartimiento de la pita situado en la parte trasera de la herramienta.r 2. Enchufe ta pita de g voftios en el conductor de ta pila, 3, Cierre la tapa del compartimiento de la pila. NOTA IMPORTANTE: Cuando la pila est6 a punto de agotarse, et simbo!o de pila agotada [_ se desplegar& en forma continua en el lade izquierdo superior de la pantalla LCD, Fig. 3 COMO USAR LA HERRAMIENTA DE MEDIR GUIADA POR LASER Coloque la parte inferior de la herramienta en el punto desde donde comenzar_ fa medici6n (ta! como una pared o el piso). Parte "_ I I._ Fig. 4 Las ampollas del nivel incorporado le ayudarAn a alinear la tnferlor ! ,_-_._<_ } herramienta a got La se5al ultras6nica es proyectada en ondas circulates (ver Fig. 4). Para medir distancias largas, entre 40 a 50 pies (12 a 15 metres), el _rea obietivo no debe ser inferior a 10 x !0 pies (3 x 3 metros) NOTA tMPORTANTE: 1. A fin de ebtener el resultado m&s exacto, asegL_resede que la onda ultras6nica est_ perpendicular al ebjetivo, 2. La superficie del ebjetivo debe ser regular y dura, sin objetes ni obst_culos en el campo medido. 3. Coloque un pedazo de cart6n en frente del objetivo medido si es pequeSo, irregular o suave.. 4. Esta herramienta no puede set utilizada para medir a tray,s de vidrio, aun cuando el rayo I_ser puede atravesarlo, 5. Todas las medidas se calculan desde la parte inferior de la herramienta (como se muestra en la Fig..4)_ LECTURA DE LA HERRAMIENTA DE MEDIR GUIADA POR LASER 1. Oprima la tecla 'Power' (encendido) y fa pantalla de visualizaci6n LCD mostrar_ la temperatura en grados Fahrenheit. 2. Apunte ta herramienta perpendicufarmente at objetivo y obtenga la medida oprimiendo la tecla "Read" (Lectura). 3. Cada nueva medida borra la anterior.. 4. La medici6n no tuvo _xito si la palabra "Err" aparece en la pantatla de visualizaci6n LCD.. 5. Cuando aparezca "Err" en la pantalta, oprima ta tecla "Read" o vuelva a encender la herramienta para medir nuevamente, asegur_ndose de evitar las siguientes condiciones: o La superficie def objetivo no ofrece una buena reflexi6n para ta seSal de medici6n ultras6nica (es decir, es una superficie suave, irregular tat como una alfombra gruesa, cortinas o empapelado irregular, etcr) • La distancia medida est,, fuera de los limites de medida especificados (2 a 50 pies),. ° Hay obstrucciones dentro de los tfmites de medida especificados. o La herramienta no esta perpendicular at objetivoo 6. La herramienta se apaga autom_ticamente si no se usa durante 30 segundos. NOTA IMPORTANTE: A fin de obtener rnediciones exactas, siernpre asegurese de apuntar la herramienta perpendicutarmente al objetivo antes de comenzar a medir_ 15 COMOMEDIR 1. Encienda la herramienta oprimiendo ta tecla de encendido (ver Fig. 5),,En ia pantalla LCD aparecer4 ta temperatura de1&rea (ver Fig,,6), La herramienta tambi6n puede utilizarse como un term6metro, Et despliegue de la temperatura desaparecer& dentro de 30 segundos. Fig. 5 Fig. 6 I COlViO MEDIR conto 2. Se|eccione la unidad de medida, A. Optima et bot6n 'FTiM' para mostrar la medida en pies y metros. B, La unidad de medida aparecer_ en la pantalla LCD (ver Fig,,7)_ 70°F !1 Fig. 7 3. Seleccione et modo de medici6n y lecturm Medici6n de una sola distancia: A. Oprima ta tecla "1---t" para una sota distancia,, B. Oprima la tecla "Read" para obtener la distancia medida (ver Fig° 8), C. Oprima nuevamente la tecla "Read" para obtener la nueva distancia medida. D. Oprima la tecta "Recall" y en ta pantatla aparecer& la _ltima distancia medida. Fig. 8 MEDICION DE DOS DISTANCIAS Y CALCULO DE LA SUMA DE AMBAS 1, Oprima la tecla "I--IF-I". Fig. 9 2. La linea izquierda que parpadea en "_-----" muestra la primera medida que se va a tomar (ver Fig, 9),, 3. Oprima la tecla "Read" para obtener la distancia medida (ver Fig, 9)_ 4. La linea derecha que parpadea en "_---=" muestra la segunda medida que se va a tomaro 5, Oprima la tecta "Read" para obtener Fig. 10 ta segunda distancia medida mostrada en la ilia superior. La suma de las dos medidas aparecer_ inmediatamente en la parte inferior de la pantalla (Fig. 10)_ 6. Oprima la tecla "Recall" y la primera medida parpadear& en la fila superior. Optima repetidamente la tecla "Recall" y las dos medidas parpadear&n circularmente en la fila superior. NOTA: Cuando mida distancias grandes que caen fuera de ta capacidad de ta herramienta, mida desde e! punto medio de la distancia hasta ambos lados y agregue los valores usando la tecla "HF-I", 16 CALCULO DE LA SUPERFICIE 1_Coloque la herramienta para medir el largo de_ _reao 2. Optima la tecla -'/b:__,, , la lfnea que parpadea en " _" significa el largo que va a ser medido (vet Fig. 11), 3. Optima la tecla "Read" para desplegar el largo medido en ta illa superior de la pantalla; ta linea det ancho en" __" comenzar& tambi_n a parpadear, 4, Coloque ta herramienta para medir el ancho de! _rea, Oprima la tecla "Read" nuevamente pars desplegar et ancho medido en ta fila superior de la pantalta y la superficie set& desp/egada inmediatamente en la fila inferior (ver Fig.,13),, 5. Optima la tecta "Recall" y et largo medido parpadearA en la ilia superior, Optima nuevamente la tecta para ver el ancho medido, 6. Optima fa tecla "Read" para tomar una nueva medida. CALCULO DEL VOLUMEN 1. Coloque la herramienta para medir el largo del Area, 2, Oprima dos veces la tecla _/@ para mostrar "@" en la pantalla_ La }inea parpadeante en" @" el largo que va a ser medido (ver Fig 14a), Fig° 11 Fig. 12 200°' Fig° 13 Fig. 14a significa 3. Oprima la tecta "Read" para desplegar et largo medido en la Ifnea superior de la pantalla; ta linea del ancho en" @ "tambi_n comenzar_, a parpadear (ver Fig_ 14b).. Fig. 14b 4, Cofoque la herramienta para medir el ancho del Area, Optima la tecla "Read" nuevamente para desptegar et ancho en la fila superior de la pantatla (ver Fig,, 14c), La tfnea de la attura ' _j!, comenzarA tambi4n a parpadear, 5. Coloque la herramienta para medir ta aftura det Area, Optima nuevamente la tecla "Read" para desplegar la altura medida en la ilia superior de ta pantallao El volumen ser_ despfegado inmediatamente en ta fila inferior (ver Fig, 14d), 6. Oprima ta tecta"Recall" y ta medida det largo parpadearA en la ilia superior, Opdma nuevamente la tecta para vet el ancho medido Optima nuevamente para ver la aftura medida, 2'00" Fig. 14c 3"00" Fig, 14d 7, Oprima la tecla "Read" para tomar una nueva medida, 2_°"" Esta herramienta ha sido diseRada como una herramienta de bajo mantenimiento, Sin embargo, para mantener su rendimiento, es necesario que siga SIEMPRE estas sencittas instrucciones, 1. SlEMPRE manipule con cuidado la herramienta, Es un dispositivo 6ptico delicado y asl es como debe ser tratado, igual como una cAmara fotogr&fica o gemelos binocutares_ 2, EvI'rE la exposici6n de la herramienta a choques, vibraci6n continua o temperaturas extremadamente calientes o frfas 3, SlEMPRE guarde la herramienta al interior, Cuando no la use, SIEMPRE guarde la herramienta en su caja protectora, 17 4.SIEMPREmantengala herramienta libredepolvoy lfquidoso 5.SiEMPRElimpiey sequebienla herramienta despu6sdecadauso,, 6.Verifiqueregularmente laspi{asparaevitarsu deterioro.SIEMPRE retire las pilas de la herramienta si no va a ser usada pot un perfodo de t{empo pro!ongado,. 7. Reemplace la pilas cuando et sfrnbolo de baterfa agotada se despliegue continuamente en Ia pantalla LCDo 8. NO desarme la herramienta. radiaciSn,. Esto puede causar exposiciSn peligrosa det usuario a 9. NO use la herramienta donde haya mucho ruido, especialmente ruido es aproximadamente 40 KHz. si la frecuencia del 10. NO trate de cambiar ninguna pieza del lente laser. PROBLEMA CAUSA SOLUCION La pita est_ agotada,_ Reempl_cela con una pila nueva,, MediciSn inexacta La distancia medida est& fuera del tfmite especificado (2 - 50 pies / 0,06 a 15m) Ajuste la distancia de modo que quede dentro de los I[mites especificados. La herramienta no estA mantenida perpendicular al objetivo, Sostenga }a herramienta perpend{cular al objetivo, La herramienta rue movida No ta mueva y vuetva a medi_ durante el proceso de mediciSno "Err" aparece en la pantalta La superficie de} objetivo no ofrece buena reflexiSn para ei impulso ultrasSnico (as decir, superficie suave e irregular tai como una alfombra gruesa, cortina o empapetado irregular, etc,). Cubra la superficie dei objetivo con cart6n o madera contrachapadao La superficie de! objetivo no ofrece buena refiexiSn para el impulso ultrasSnico (as decir, superficie suave e irregular tal como una alfombra gruesa, cortina o empapelado irregular, etc.),, Cubra {a superficie del objetivo con cart6n o madera contrachapada, Las obstrucciones est&n dentro de los lfmites de sonido,. Retire todas las obstrucclones, La herramienta no se mantiene perpendicular al objetivo, Mantenga la herramienta perpendicular at objetivo I 18 NOTAS "19 Your Home For repair in your home of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourselfo For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME (1-800-469-4663) ww_,,Lsears.com _ Anytime, day or night (U.SA. and Canada) wwvw,sears.ca Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Pads and Repair Center. 1-800-488-1222 Anytime, day or night (U.SA only) w'_'_v.sears.com To purchase a protection agreement (U.S°A_) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.SoA,) Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: 1-888.SU-HOGAR sM 1-800-361-6665 (Canada) Au Canada pour service en frangais: 1-800-LE-FOYER Mc (_-8o0-533_937) wvcw..sears_ca © Sears,Roebucka_ Co, @ Registered Trademark I T_ Trademark t sMService Mark of Sears, Roebuck and Co, ® Marca Registrada / T_ Marca de F, brica / s_ Marca de Servicio de Sears, Roebuck and Co _c Marque de commerce 1 _D Marque d_pos6e de Sears, Roebuck and Co
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 20 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Sat Nov 01 04:17:33 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools