CRAFTSMAN Lawn, Tractor Manual L0912323
User Manual: CRAFTSMAN CRAFTSMAN Lawn, Tractor Manual CRAFTSMAN Lawn, Tractor Owner's Manual, CRAFTSMAN Lawn, Tractor installation guides
Open the PDF directly: View PDF .
Page Count: 64
Download | |
Open PDF In Browser | View PDF |
Operator's Manual CRI FTSMRN° LAW TRACTO 22.0 HR* 42" Mower Electric Start Automatic Transmission Model No. 917.28934 • EspaSol, p. 32 This product has a low emission engine which operates differently from previously built engines. Before you start the engine, read and understand this Owner's Manual. IMPORTANT: Read and follow all Safety Rules and Instructions before operating this equipment. For answers to your questions about this product, Call: 1-800-659-5917 Sears Craftsman Help Line 5 am - 5 pm, Mon- SEARS, ROEBUCKAND CO., HOFFMAN ESTATES, Visit our Craftsman website:www.sears.com/craffsman 428413 Rev 2 Sat IL 60179 U.S.A. *As rated by the engine manufacturer Warranty ................................................ Safety Rules .......................................... Product Specifications ........................... Assembly/Pre-Operation ....................... Operation ............................................... Maintenance Schedule ........................ CRAFTSMAN TWO Maintenance 2 3 6 7 9 17 ........................................ 17 Service and Adjustments ..................... 20 Storage ................................................ 27 Troubleshooting ................................... 28 Sears Service ........................ Back Cover FULL WARRANTY YEARS ON RIDING EQUIPMENT When operated and maintained according to all supplied instructions, if this riding equipment fails due to a defect in material or workmanship within two years from the date or purchase, call 1-800-4-MY-HOME® to arrange for free repair. Also, when operated and maintained according also cover defects in material and workmanship from the date of purchase This warranty pay for: • covers ONLY defects to all supplied instructions, Warranty will of the Frame and Front Axle for five years in material and workmanship. Expendable items that become worn during normal use, blades, spark plugs, air cleaners, belts, and oil filters. maintenance but not limited to Standard • Tire replacement or repair thorns, stumps, or glass. caused • Tire or wheel replacement operation or maintenance. or repair • Repairs necessary because of operator abuse, including but not limited caused by towing objects beyond the capability of the riding equipment, objects that bend the frame or crankshaft, or over-speeding the engine. • Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding equipment according to the instructions contained in the operator's manual. • Engine (fuel system) cleaning or repairs caused byfue! determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date. • Normal and wear All riding equipment and battery commercial or rental purposes. This warranty applies Roebuck and Co., resulting warranty legal finishes, coverage is within rights, Estates, from is void objects, such wear, accident, or product as nails, or improper to damage impacting label replacement. if this product the United is ever used for States. and you may also have IL 60179 2 outside from normal of the exterior Hoffman or tune-ups. by punctures only while this product This warranty gives you specific vary from state to state. Sears, oil changes, including • deterioration servicing, Sears will NOT other rights which _DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. _I, WARNING: In orderto prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. • _,WARNING: Do not coast down a hill in neutral, you may lose control of the tractor. • _I, WARNING: Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. • • • _WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. • • • _I, WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. I. GENERAL • • • • • • • • • • OPERATION Read, understand, and followall instructions on the machine and in the manual before starting. Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times. Only allow responsible adults, who are familiar with the instructions, to operate the machine. Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades. Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area. Never carry passengers. Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. • • 3 Never direct discharged materialtoward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces. Do not operate machine without the entire grass catcher, discharge chute, or other safety devices in place and working. Slow down before turning. Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge chute. Operate machine onlyin daylight or good artificial light. Do not operate the machine while under the influence of alcohol or drugs. Watch for traffic when operating near or crossing roadways. Use extra care when loading or unloading the machine into a trailer or truck. AIways wear eye protection when operating machine. Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury. Follow the manufacturer's recommendation for wheel weights or counterweights. Keep machine free of grass, leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage. li. SLOPE OPERATION Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or ifyou feel uneasy on it, do not mow it. • Mow up and down slopes, not across. • Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles. • • • • • • • Choose a low ground speed so that you will not have to stop or shift while on the slope. Do not mow on wet grass. Tires may lose traction. Never chine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child. allow children to operate the ma- Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill. • Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point. Followthemanufacturer'srecommenda- Avoid starting, stopping, or turning on a slope. Ifthetires Iosetraction, disengage the blades and proceed slowly straight down the slope. Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over. • tion for weight limits for towed equipment and towing on slopes. Never allow children or others in or on Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes. Do not try to stabilize the machine by putting your foot on the ground. Do not mow near drop-offs, ditches, or embankments. The machine could V. SERVICE • • and the mowing activity. that children will remain saw them. Travel slowly stop. and allow extra distance to OF GASOLINE To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. • Never fuel the machine indoors. • Neverstorethe machine orfuel container Never assume where you last • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. Be alert and turn machine off if a child enters the area. Before and while backing, look and down for small children. towed equipment. On slopes, the weight ofthetowed equipment may cause loss of traction and loss of control. SAFE HANDLING Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine • • • Iii. CHILDREN • Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. IV. TOWING suddenly roll over if a wheel is over the edge or if the edge caves in. • • • behind where there is an open flame, spark, pilot light such as on a water heater other appliances. Never fill containers inside a vehicle on a truck or trailer bed Always place containers away from your vehicle Remove gas-powered the truck or trailer and or or or with plastic liner. on the ground when filling. equipment from refuel it on the ground. Ifthis is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle. 4 • • • Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device. Iffuel is spilled on clothing, change clothing immediately. Never overfill fueltank. Replace gas cap and tighten securely. GENERAL • • • • • • • • • • • SERVlCE • Never operate machine in a closed area. Keep all nuts and boltstight to be sure the equipment is in safe working condition. Nevertamperwithsafetydevices. Check their proper operation regularly. Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machineto cool before storing. • • • If you strike a foreign object, stop and inspectthe machine. Repair, if necessary, before restarting. Never make any adjustments or repairs with the engine running. Checkgrasscatchercomponentsandthe discharge chute frequently and replace with manufacturer's recommended parts, when necessary. Mower blades are sharp. Wrapthe blade or wear gloves, and use extra caution when servicing them. Check brake operation frequently. Adjust and service as required. Maintain orreplace safetyand instruction labels, as necessary. Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area. • Never Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. • Before and while backing, look behind and down for small children. • Mow up and down slopes across. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. Be alert and turn machine off if a child enters the area. • Choose a low ground speed so that you will not have to stop or shift while on the slope. Avoid starting, stopping, or turning on a slope. Ifthetires Iosetraction, disengage the blades and proceed slowly straight down the slope. If machine stops while going uphill, disengage blades, shift into reverse and back down slowly. Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible. • • 5 carry passengers. (15 ° Max), not PRODUCT SPECIFICATIONS Gasoline Capacity and Type: 2.5 Gallons Unleaded Regular Oil Type (API-SG-SL): SAE 10W30 (above 32°F SAE 5W30 (below 32°F Oil Capacity: W/Filter: W/O Filter: Spark Champion RC12YC (Gap: .030") Plug: Ground Speed Charging Forward: Reverse: System: Battery: Blade 15 Amps 45-55 Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's when having a Repair Protection Agreement can save you money and aggravation. 51 oz. 35 oz. Purchase a Repair Protection Agreement now and protect yourseff from unexpected hassle and expense. 0-5.5 0-2.4 Here's @ 3600 RPM Amp/Hr: Min. CCA: Case size: Bolt Torque: REPAIR PROTECTION AGREEMENTS • 28 230 U1R what's in the Agreement: Expert service byour repair specialists. 12,000 profesional Unlimited service and no charge for parts and labor on all covered repairs. Ft. Lbs. Product product CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact a Sears or other qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this tractor. Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES". CUSTOMER included replacement can't be fixed. if your covered Discount of 10% from regular price of service and service-related parts not covered bythe agreement; also, 10% off regular price of preventive maintenance check. Fast help by phone - phone support from a Sears representative on products requiring in-home repair, plus convenient repair scheduling. Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online. RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tractor. • Follow the instructions under "Maintenance" and "Storage" sections of this owner's manual. Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase your Repair Protection Agreement today! ,_WARNING: This tractor is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grasscovered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest Sears service center (See REPAIR PARTS manual). Some limitations and exclusions apply. For prices and additional information call 1-800=827=6655. SEARS INSTALLATION SERVICE For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. call 1-800=4-MY=HOME® 6 Slope Keys Sheet (1) Oil Drain Tube For Future Use (2) Keys Your new tractor has been assembled unassembled for shipping purposes. TOOLS REQUIRED FOR at the factory set will make assembly wrench sizes are listed. (1) 1/2" wrench Tire pressure (2) 7/16" Pliers Utility wrenches Lift seat to raised gauge knife • When right or left hand is mentioned in this manual, itmeanswhenyou areintheoperating position (seated behind the steering wheel). UNPACK • • • TRACTOR parts left position. NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual TO REMOVE CARTON of those TO CHECK BATTERY ASSEMBLY 1. A socket wrench easier. Standard with the exception for charging instructions). For battery and battery cable installation see "REPLACING BATTERY" in the "Service and this manual. FROM Adjustments" section Label CARTON Remove all accessible loose parts and parts cartons from carton. Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat. Check for any additional loose parts or cartons and remove. BEFORE REMOVING FROM SKID TRACTOR ADJUST 1. Sit in seat. 2. Lift up adjustment lever (A) and slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down. Release lever to lock seat in position. 3. 7 SEAT in NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to removethe tractor from the skid. CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product. WARNING" Before starting, read, understandand follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects. Please _/All _/ TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) 1. 2. 3. 4. 5. _/ CHECK TIRE holding tractor. the deflector properly in carton. prepared comfortably and and tight- tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory). pulleys While learning howto use your tractor, pay extra attention to the following important items: _/ Engine _/ Fuel tank is filled with fresh, clean, regular unleaded gasoline. Become familiar with all controls, their location and function. Operate them before you start the engine. _/ POSITION oil is at proper Be sure brake system condition. level. is in safe operating Be sure Operator Presence System and Reverse Operation System (ROS) are working properly (See the Operation and Maintenance sections in this manual). SYSTEM After you learn how to operate tor, check to see that the brake ing properly. See "TO CHECK in the Service and Adjustments this manual. parts been _/Check wiring. See that all connections are still secure and wires are properly clamped. _/ Before driving tractor, be sure freewheel control is in "transmission engaged" position (see "TO TRANSPORT" in the Operation section of this manual). See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly. BRAKE loose have they are routed properly around and inside all belt keepers. For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and Adjustments section of this manual. CHECK instructions Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling). _/Check mower and drive belts. Be sure LEVELNESS CHECK FOR PROPER OF ALL BELTS is checklist: _/ PRESSURE DECK assembly completed. No remaining Battery charged. _/All The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK the following _/Seat is adjusted ened securely. Raise attachment lift lever to its highest position. Release parking brake by depressing brake pedal. Place freewheel control in disengaged position to disengage transmission (See "TO TRANSPORT" in the Operation section of this manual). Roll tractor forward off skid. Remove banding shield up against review v" It your tracis operatBRAKE" section of is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE"and "PURGE TRANSMISSION" in the Operation 8 section of this manual). These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. R N REVERSE NEUTRAL H L I\1 HIGH LOW CHOKE FAST SLOW iGNITION ENGINE OFF REVERSE OPERATION SYSTEM (ROS) ENGINE ON ENGINE START J; LIGHTS ON FUEL ATTACHMENT CLUTCH DISENGAGED BATTERY BRAKE MOWER HEIGHT FORWARD DANGER, KEEP HANDS AND FEET AWAY CRUISE CONTROL CLUTCH/BRAKE PEDAL KEEP AREA CLEAR SLOPE HAZARDS (SEE SAFETY FREE WHEEL (Automatic Models only) MOWER LiFT ,t REVERSE ATTACH M ENT CLUTCH ENGAGED PARKING SWITCH & & & RULES SECTION) DANGER indicates a hazard which, if not avoided, will result in death or serious injury. WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION when used without the alert symbol, indicates a situation that could result in damage to the tractor and/or engine. Failure to follow instructions could result in serious injury or death. The safety alert symbol is used to identify safety information about hazards which can result in death, serious injury and/or property damage. ,Jl_llllll/_ll_,, HOT SURFACES indicates if not avoided, could result and/or property damage. a hazard which, in death, serious FiRE indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage. 9 injury KNOW YOUR TRACTOR READ THIS TRACTOR OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING Compare the illustrations with your tractor to familiarize yourself with the locations various controls and adjustments. Save this manual for future reference. YOUR of 03108 Our tractors conform American to the applicable safety standards National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to raise and lower the mower or other at- of the (G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION - Allows operation of mower or other powered attachment while in reverse. tachments mounted to your tractor. (B) BRAKE PEDAL - Used for braking the tractor and starting the engine. (C) PARKING BRAKE - Locks clutch/ brake pedal into the brake position. (D) THROTTLE/CHOKE CONTROLUsed for starting and controlling engine speed. (E) ATTACHMENT CLUTCH LEVER = Used to engage the mower blades, or other attachments mounted to your tractor. (F) IGNITION SWITCH - Used for starting and stopping the engine. (H) LIGHT SWITCH - Turns the headlights on and off. (J) CRUISE CONTROL LEVER - Used to set forward movement of tractor at desired speed without holding the forward drive pedal. (K) FORWARD DRIVE PEDAL - Used for forward movement of tractor. (L) REVERSE DRIVE PEDAL - Used for reverse movement of tractor. (M) FREEWHEEL CONTROL - Disengages transmission for pushing or slowly towing the tractor with the engine off. 10 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. HOW TO USE YOUR TRACTOR NOTE: TO SET PARKING BRAKE tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas. Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 1. Depress brake pedal (B) all the way down and hold. 2. Under _,CAUTION: when stop tractor Always operate engine at full speed (fast). , Operating engine at less than full speed (fast) reduces engine's operating efficiency. • Full speed (fast) offers the best mower performance. TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the forward and reverse drive pedals. 1. Start tractor and release parking brake. 2. Slowly depress forward (K) or reverse (L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed. STOPPING BLADES Always conditions completely, as described above, and set parking brake before leaving the operator's position. TO USE THROTTLE CONTROL Pull parking brake lever (C) up and hold, release pressure from brake pedal (B), then release parking brake lever. Pedal should remain in brake position. Make sure parking brake will hold tractor secure. MOWER certain - • To stop mower blades, move attachment clutch clutch lever to disengaged position. TO USE CRUISE CONTROL The cruise feature control can be used for forward travel only. SYSTEM CHARACTERISTICS GROUND DRIVE - The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough tertian or while trimmimg or turning. • With forward drive pedal (K) depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever. To disengage the cruise control, depress the brake pedal or tap on forward drive pedal. • To stop ground drive, depress clutch/ brake pedal all the way down. • Move motion control lever (J) to neutral position. ENGINE • Move throttle control (D) between half and full speed (fast) position. NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping, may cause engine to "backfire". • Turn ignition key (F) to "STOP" position and remove key. Always remove key when leaving tractor to prevent unauthorized use. • Never use choke (N) to stop engine. IMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead. 11 TO ADJUST MOWER CUTTING The position of the attachment determines the cutting height. • Put attachment lift lever HEIGHT lift lever in desired TO OPERATE (A) Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills. 1. Select desired height of cut with attachment lift lever. 2. Start mower blades by engaging attachment clutch control. cut- ting height slot. The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed. • The average lawn should be cut to approximately 2-1/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth. • For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height. TO ADJUST GAUGE TO STOP MOWER BLADES Disengage 2. clutch Do not operate control. the mower without either the entire on mowers so equipped, shield (S)in place. grass catcher, or the deflector REVERSE SYSTEM WHEELS OPERATION (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual). With mower in desired height of cut position, gauge wheels should be assembled so they are slightly offthe ground. Install gauge wheel in appropriate hole. Tighten securely. A_WARNING" Backing up with the at- tachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary. 9/16 . attachment _CAUTION: Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. MOWER Repeat for all, installing gauge wheel in same adjustment hole. 12 USING THE SYSTEM - REVERSE OPERATION NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.). Only use if you are certain no children or other bystanders will enter the mowing area. 1. Depress brake pedal all the way down. 2. With engine running, turn ignition key counterclockwise to ROS "ON" position. 3. Look down and behind before and 4. 5. while backing. Slowly depress start movement. reverse drive Transmission Engaged pedal to When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position. ROS "ON" Position Engine "ON" Position (Normal Operating) Transmission Disengaged TOWING MENTS TO OPERATE Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual. • Choose the slowest speed before starting up or down hills. • Avoid stopping or changing speed on hills. BEFORE CHECK OTHER ATTACH= STARTING ENGINE THE ENGINE OIL LEVEL The engine in your tractor has been shipped, from the factory, already filled with summer weight oil. 1. Check engine oil with tractor on level ground. 2. Pull up and remove oil fill cap/dipstick; wipe oil off. Reinsert the dipstick into the tube and push down firmly into place. Remove and read oil level. If necessary, add oil until "FULl" mark on dipstick is reached. Do not overfill. • For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual). • To change engine oil, see the Maintenance section in this manual. • If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake. • To restart movement, slowly release parking brake and brake pedal. • Slowly depress appropriate drive pedal to slowest setting. • Make all turns slowly. TO TRANSPORT When pushing or sure to disengage freewheel control Freewheel control drawbar of tractor. AND Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. ON HILLS ,_I_,WARNING: CARTS towing your tractor, be transmission by placing in freewheeling position. is located at the rear 1. Raise attachment lift lever to its highest position. 2. Pull freewheel control out and into the slot and release so it is held in the disengaged position. • Do not push or tow tractor at more than two (2) MPH. • To re-engage transmission, reverse above procedure. 13 ADD GASOLINE • Fill fuel tank to bottom of filler neck. WARM WEATHER and above) Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. _f:I,CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: When operating in temperatures below 32°F(0°C), use fresh, clean winter grade gasoline to help ensure good cold weather starting. CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. (50 ° F/10°C 6. When engine starts, move the throttle control to the fast position. • The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above. COLD WEATHER and below) 7. STARTING (50 ° F/10°C When engine starts, leave throttle control in choke position until engine warms up and begins to run roughly. Once rough running begins, immediately move the throttle control to the fast position. Engine warm-up may take from several seconds to several minutes (the colder the temperature, the longer the warm-up). AUTOMATIC TRANSMISSION WARM UP Before driving the unit in cold weather, the transmission should be warmed up as follows: 1. 2. 3. Be sure the tractor is on level ground. Release the parking brake and let the brake slowly return to operating position. Allow one minute for transmission to warm up. This can be done during the engine warm up period. • The attachments can also be used dur- TO START ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. 1. Be sure freewheel control is in the 2. STARTING ing the engine warm-up period after the transmission has been warmed up. NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 ° F) the carburetor fuel mixture may need to be adjusted for best engine performance (see "TO ADJUST CARBURETOR" in the Service transmission engaged position. Sit on seat in operating position, depress brake pedal and set parking brake. and Adjustments Move attachment clutch to disengaged position. 4. Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below. 5. Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry. section of this manual). 3. RGE TRANSMISSION CAUTION: Never engage or disen- gage freewheel lever while the engine is running. To ensure proper operation and performance, it is recommended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have developed during shipping of your tractor. 14 IMPORTANT: Should your transmission require removal for service or replacement, it should be purged after reinstallation before operating the tractor. 1. Place tractor safely on a level surface that is clear of objects and open - with engine off and parking brake set. 2. Disengage transmission by placing freewheel control in disengaged position (See "TO TRANSPORT" in this section of manual). 3. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. Disengage parking brake. AUTION: At any time, during step 4, there may be movement of the drive wheels. 4. 5. 6. 7. 8. When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished. f ( ,€ Depress forward drive pedal to full forward position and hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position and hold for five (5) seconds and release pedal. Repeat this procedure three (3) times. Shutoff engine and set parking brake. Engage transmission by placing freewheel control in engaged position (See "TO TRANSPORT" in this section of this driving Your transmission ready for normal MOWING procedure is now purged operation. three and now TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive so that clippings are discharged onto the area that has already been cut. Have the cut area to the right of the tractor. This will result in a more even distribution uniform cutting. of clippings J • If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height. • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. • Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough speed to give the mower cutting performance as well as the quality of cut desired. • When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used. manual). Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake. Drive tractor forward for approximately five feet then backwards for five feet. Repeat times. }l and more 15 MAINTENANCE SCHEDULE BEFORE EACH USE EVERY EVERY EVERY EVERY EVERY BEFORE 8 HOURS 25 HOURS 50 HOURS 100 HOURS SEASON STORAGE Check Brake Operation Check Tire Pressure T Check Operator A Check for Loose C T ChecWReplace Mower Lubrication Chart 0 Check Battery a Clean Battery Clean Debris Check Transaxle m Check Mower Check V-Belts Check Enqine Change Presence Blades v' and Terminals Off Steering Plate Cooling v' Levelness Oil Level Engine v'12 Oil (with oil filter) Oil (without oil filter) NE Clean Air Filter G Air Screen Clean v" v' Level Engine Change & ROS Systems Fasteners Inspect Muffler/Spark Attester N Replace Oil Filter (if equipped) E Clean Engine Cooling Fins _2 Replace Spark Plug Replace R_lace Air Filter Paper Cartridge Fuel Filter 1 - Cbange more often 2 - Service more often when when GENERAL operating operating under in dirty a heavy or dusty load or in high ambient temperatures. conditions. 3 - Replace 4 - Not blades required more if equipped often when with RECOMMENDATIONS mowing maintenance-free in sandy soil. LUBRICATION The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual. (_ S_ Zerk (_Front Wheel Bearing zerk Some adjustments will need to be made periodically to properly maintain your tractor. At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual. 5 - See Cleaning in Maintenance Section. battery. CHART Spindle Zerk Front Wheel Bearing zerk d_ Sector Gear Teeth Engine • At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer. BEFORE 1. 2. 3. 4. 5. _General Purpose Grease @Refer to Maintenance "ENGINE" Section EACH USE Check engine oil level. Check brake operation. Check tire pressure. Check operator presence and ROS systems for proper operation. Check for loose fasteners. IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly. 16 TRACTOR BLADE Always observe safety rules when performing any maintenance. BRAKE OPERATION For best results mower blades must be sharp. Replace worn, bent or damaged blades. A CAUTION: Use only a replacement blade approved bythe manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty. If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual). TIRES BLADE Raise mower to highest position to allow access to blades. NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth. 2. Remove blade bolt by turning counterclockwise. 3. Install new blade with stamped "GRASS SIDE" facing the ground. iMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly. 4. Install and tighten blade bolt securely (45-55 Ft. Lbs. torque). iMPORTANT: Special blade bolt is heat treated. REVERSE OPERATION SYSTEM (ROS) Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately. • The engine should not start unlessthe brake pedal is fully depressed, and the attachment clutch control is in the disengaged position. CHECK OPERATOR PRESENCE SYSTEM CHECK SYSTEM REVERSE Mandrel Assembt, Center Hole / Blade Bott-'_'_ Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. and the atany attempt seat should • Keep battery bolts tight. • Keep small vent holes open. never operthe seat. • Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary. (ROS) TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and terminals can cause the battery to "leak" power. 1. Disconnect BLACK then RED battery battery from tractor. 2. 3. Rinse the battery with plain water and dry. Clean terminals and battery cable ends with wire brush until bright. Coat terminals with grease or petroleum jelly. Reinstall battery (See "REPLACING BATTERY" in the Service and Adjustments section of this manual). 4. 5. Engine "On" Position (Normal Operating) Blade BATTERY • When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should shut off the engine. • When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should NOT shut off the engine. ROS "On" Position X_ (Special) any attempt seat without should shut OPERATION REMOVAL 1. • Maintain proper air pressure in all tires (See PSI on tires). • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. NOTE: To seal tire punctures and prevent flat tires dueto slow leaks, tire sealant may be puF chased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion. OPERATOR PRESENCE SYSTEM AND • When the engine is running, by the operator to leave the first setting the parking brake off the engine. • When the engine is running tachment clutch is engaged, by the operator to leave the shut off the engine. • The attachment clutch should ate unless the operator is in CARE 17 battery cable first cable and remove TRANSAXLE COOLING The transmissionfan andcoolingfins should be kept clean to assure proper cooling. Do not attemptto clean fan or transmission while engine is running or while the transmission is hot.Toprevent possible damage to seals, do not use high pressure water or steam to clean transaxle. • Inspect cooling fan to be sure fan blades are intact and clean. • Inspectcoolingfins for dirt,grassclippings and other materials. To prevent damage to seals, do not use compressed air or highpressuresprayerto cleancoolingfins. TRANSAXLE PUMP FLUID The transaxle was sealed at the factory and fluid maintenance is not required for the life of the transaxle. Should the transaxle ever Only use high quality detergent oil rated with API service classification SG-SL Selectthe SAE VISCOSITY F -20 c -1o 0 -20 TEMPERATURE 30 -1; 32 to your 40 RANGE ANTICIPATED BEFORE 80 _o 4; CLEAN AIR INTAKE/COOLING AREAS To ensure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times. Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled. Determine temperature range expected before oil change. All oil must meet API service classification SG-SL • Be sure tractor is on level surface. • Oil will drain more freely when warm. • Catch oil in a suitable container. 3. OIL FILTER Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See Engine Manual. NEXT OIL CHANGE Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year. Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. TO CHANGE ENGINE OIL 2. Use gauge on oil fill cap/dipstick for checking level. For accurate reading, insert dipstick into the tube and push down firmly into place before removing. Keep oil up to, but not over, the "FULL' line on dipstick. Push dipstick down firmly into the tube when finished. AIR FILTER 100 1o oil visc chart4 1. To open, pull out on the drain valve. Afteroil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown. Remove the drain tube and replace the cap onto the end of the drain valve. Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see "PRODUCT SPECIFICATIONS"sectionofthismanual. Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. 60 1'0 4. 5. ENGINE GRADES ; Drain Yellow Ca 8. LUBRICATION __ Tube 7. ENGINE grade according temperature. Closed and Locked 6. leak or require servicing, contact your nearest Sears or other qualified service center. V-BELTS Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. oil's SAE viscosity expected operating Oil Drain Valve NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating. Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil. Removeyellowcapfromendofdrainvalve and install the drain tube onto the fitting. Unlock drain valve by pushing inward slightly and turning counterclockwise. CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed airto remove dirt and stubborn dried gum fibers. 18 DECK WASHOUT PORT Your tractor's deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach. IMPORTANT: Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached. 2. Make sure the attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine. 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose. 4. Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle. MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. SPARK PLUG(S) Replace spark plug (s) atthe beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual. IN=LINE FUEL FILTER The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flowto carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel line sections. 2. Place newfuel filter in position in fuel line with arrow pointing towards carburetor. 3. Be sure there are no fuel line leaks and 4. clamps are properly positioned. Immediatelywipeupanyspilled gasoline. Nozzle Ada Clamp Washout Port CLEANING • • Clean engine, battery, seat, finish, etc. of all foreign matter. Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on. 6. While sitting in the operator's position on the tractor, re-start the engine and place the throttle lever in the Fast",_" position. IMPORTANT: Recheck the area making certain the area is clear. 7. Movethetractor's attachment clutch controltothe"Engaged" position. Remain in the operator's position with the cutting deck engaged until the deck is cleaned. 8. Move the tractor's attachment clutch control to the "DISENGAGED" position. Turn the ignition key to the STOP position to turn the tractor's engine off. Turn the water off. 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. 10. Move the tractorto a dry area, preferably a concrete or paved area. Place the attachment clutch control in the "Engaged" position to remove excess water and to help dry before putting the tractor away. WARNING: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade. • Replace broken or missing washout fitting immediately, prior to using mower again. • Plug any holes in mower with bolts and Iocknuts. A CAUTION: Avoid all pinch points and movable parts Clutch/brake pedal Clean top Plate Sieering System, Dash, , Fender and Mower Noto.Shown • • Pinch _CAUTION: i _ Points Keep finished surfaces and wheels free of all gasoline, oil, etc. Protect painted surfaces with automotive type wax. We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower. 19 WARNING: ORTO SERVICE ADJUSTMENTS: AVOID SERIOUS INJURY, BEFORE PERFORMING ANY 1. Depress brake pedal fully and set parking brake. 2. Place attachment clutch in "DISENGAGED" position. 3. Turn ignition key to "STOP" and remove key. 4. Make sure the blades and all moving parts have completely stopped. 5. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REMOVE MOWER 1. Place 2. GAGED" position. Lower attachment 3. 4. 5. 6. 7. ,_ attachment 8. clutch Slide mower out from under right side of tractor. IMPORTANT: If an attachment other than in "DISEN- the mower is to be mounted on the tractor, remove the front link (E) and rear lift links (C) from tractor and hook the clutch spring (Q) into the cable guide on front edge of lower dash. lift lever to its lowest position. Roll belt off engine pulley (M) and belt keepers (G). Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket. TO INSTALL Be sure tractor is on level surface and engage parking brake. 1. Lower attachment lift lever to its lowest position. Remove clutch cable spring (Q) from idler arm (R). Disconnect front link (E) from mower remove retainer spring and washer. Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. CAUTION: MOWER _, CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. 2. Slide mower under tractor until it is centered under tractor. After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever. 03042tex 20 3. ATTACH 4. ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring. Repeat on opposite side of tractor. MOWER SIDE SUSPENSION 7. 8. . . Hook end of clutch cable spring (Q) hole in idler arm (R). 9. Push clutch cable housing guide (P) bracket, slide collar (L) onto guide secure with retainer spring (K). 10. Install belt onto engine pulley (M) and keepers (G). ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring. hole (F). into into and belt iMPORTANT: Check belt for proper routing in all mower pulley grooves. 11. Raise attachment lift lever to highest position. 12. If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual. ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link assembly through front front suspension bracket Insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J). in tractor % 03042tex 21 TO LEVEL FRONT=TO=BACK MOWER Make sure tires are properly inflated to the PSI shown on tires. Iftires are over or under IMPORTANT: to-side. inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly. VISUAL 1. 2. SIDE-TO-SIDE ADJUSTMENT Each full turn of adjustment mower height about 3/16". Deck nut will QQ Turn nut rigl to raise mower 3. SIDE-TO-SIDE be level side- O 0__000 g ° 02548 , With a 3/4" or adjustable wrench, turn front link adjustment nut (B) clockwise (tighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower. .....Turn nut left ', to lower mower Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results. PRECISION must To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the ,_ower is in its highest position. CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. • Raise mower to highest position. • Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade. • If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor. • With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B. With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower. With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower. NOTE: change ADJUSTM ENT ADJUSTMENT 1. With alltires properly inflated, parktractor on level ground or driveway. jl_ CAUTION" Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. 2. Raise mower to its highest position. 3. At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides. 4. 5. Tighten adjust nut B to raise mower Loosen adjust nut B to lower mower Loosen jam nut A first If adjustment is necessary, see step 2 in Visual Adjustment instructions above. Recheck measurements, adjust if necessary until both sides are equal. NOTE: Each full turn of the adjustment nut will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip. • Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut. 22 TO REPLACE BELT MOWER BLADE DRIVE BELT INSTALLATION 1. The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking 2. brake. BELT REMOVAL1. 2. 3. Remove mowerfromtractor (See"TO REMOVE MOWER" inthis section of manual). Work belt off both mandrel pulleys and idler pulleys. Pull belt away from mower. BELT INSTALLATION 1. 2. 3. 3. Work belt around and idler pulleys Make sure belt is and inside all belt Install mower (See this section of this Mandrel Pulley 4. 5. both mandrel 6. pulleys 7. in all pulley grooves guides. "To Install Mower" in manual). Idler Mandrel )3043 TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. BELT REMOVAL1. Remove mower (See "TO REMOVE MOWER" in this section of manual). NOTE: Observe entire motion drive belt and position of all belt guides and keepers. 2. Remove beltfrom stationary idler (A) and clutching idler (B). 3. Remove belt from centerspan idler (C). 4. Pull belt slack toward rear of tractor. 5. 6. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D). Remove belt downward from engine pulley (E). Slide belt toward rear of tractor, off the steering plate (F) and remove from tractor. 23 - Install new belt from tractor rear to front, over the steering plate (F) and above clutch brake pedal shaft (G). Pull belt toward front of tractor and roll belt onto engine pulley (E). Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper. Install belt on centerspan idler (C). Install belt through stationary idler (A) and clutching idler (B). Make sure belt is in all pulley grooves and inside all belt guides and keepers. Install mower (See "TO INSTALL MOWER" in this section of manual). TO CHECK BRAKE TO START TERY If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. service TO ATTACH center. FRONT WHEEL TOE-IN/CAMBER Your new tractor front wheel toe-in adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a Sears or other qualified service center. WHEEL CABLES - Connect 2. to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis. Connect one end of the BLACK cable 3. to the NEGATIVE (-) terminal (C) of fully charged battery. Connect the other end of the BLACK one end of the RED cable cable (D) to good chassis ground, away from fuel tank and battery. FOR REPAIRS 1. 2. Block up axle securely. Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose). 3. Repair tire and reassemble. NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key. 4. Replace washers and snap retaining ring securely in axle groove. 5. Replace axle cover. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant also prevents JUMPER 1. and camber is set at the factory and is normal. The front wheel toe-in and camber are not TO REMOVE BAT- this manual). If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles. when you try to manually push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified A WEAK If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE section of engaged" position. Pull freewheel control out and into the slot and release so it is held in the disengaged position. The rear wheels must lock and skid or other WITH _ILWARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. You may also check brake by: 1. Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake. 2. Disengage transmission by placing freewheel control in "transmission dis- Sears ENGINE TO REMOVE ORDER - CABLES, cable REVERSE 1. BLACK 2. then from the fully charged battery. RED cable last from both batteries. first from chassis DD tire dry rot and corrosion. Weak or Dead Battery Washers Retaining Ring I Axle Cover _Square Key (Rear Wheel Only) 24 Fully Charged Battery and REPLACING BATTERY TO REPLACE FUSE Replace with 30 amp automotive-type in fuse. The fuse holder is located the dash. n_a sWARNING: Do not short battery termiby allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to TO REMOVE prevent sparking from accidental grounding. 1. Lift seat pan to raised position and open battery box door. 2. Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor. 3. Install new batterywith terminals in same position as old battery. 4. First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. 5. Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely. 6. Close battery box door. HOOD plugbehind & GRILLASSEMBLY 1. Raise hood. 2. 3. Unsnap headlight wire connector. Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift offoftractor. When replacing hood, be sure to reconnect the headlight wire connector. 4. Headlight Wire Connector Seat 03074 Battery Box Door ENGINE TOADJUSTTHROTTLE Keps Nut The throttle control has been preset at the factory and adjustment should not be necessary Check adjustment as described below before loosening cable. If adjustment is necessary, see engine manual. Hex Bolt Positive (Red) Cable TO REPLACE 1. 2. Negative (Black) Cable HEADLIGHT Raise hood. Remove bulb holder from CONTROLCABLE TO ADJUST CHOKE CONTROL BULB The choke control has been preset at the factory and adjustment should not be necessary. If adjustment is necessary, see engine manual. the hole in TO ADJUST the backside of the grill. 3. Replace bulb in holder and install bulb holder securely back into the hole in the backside of the grill. 4. Close hood. INTERLOCKS AND RELAYS CARBURETOR Your carburetor has been preset at the factory and adjustment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. If the engine does need adjustment, see engine manual. Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting. • Check wiring. See electrical wiring diagram in the Repair Parts manual. 25 Immediately prepare your tractor for storage at the end of the season or if the tracwill not be used for 30 days or more. WARNING: Never store the tractor which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. • Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fue! tank or permanent damage may occur. • Use fresh fuel next season. with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. TRACTOR When tractor is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. 2. 3. 4. 5. Clean entire tractor in the Maintenance NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the car- (See "CLEANING" section of this manual). Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual). Lubricate as shown in the Maintenance section of this manual. buretor. Do not empty the gas tank and carburetor if using fuel stabilizer. ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER(S) Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. Touch up all rusted or chipped paint surfaces; sand lightly before painting. 1. 2. BATTERY 3. • Fully charge the battery for storage. • After a period of time in storage, battery may require recharging. • To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the Maintenance section of 4. Remove spark plug(s). Pour one ounce of oil through spark plug hole(s) into cylinder(s). Turn ignition key to start position for a few seconds to distribute oil. Replace with new spark plug(s). OTHER • Do not store gasoline from one season to another. • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • If possible, store your tractor indoors and cover it to give protection from dust and dirt. this manual). • After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals. • If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces. • Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust. IMPORTANT: Never cover tractor while ENGINE FUEL SYSTEM engine IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fue! hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture 26 and exhaust areas are still warm. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM Will not start Hard to start Engine will not turn over CAUSE CORRECTION 1 Out of fuel. 1 Fill fuel tank. 2 Engine not "CHOKED" properly. 2 See"TO START ENGINE" Operation section. 3 Engine flooded. 3 Wait several minutes before attempting to start. 4 Bad spark plug. 4 Replace 5 Dirty air filter. 5 Clean/replace 6 Dirty fuel filter. 6 Replace fuel filter. 7 Water in fuel. 7 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. 8 Loose or damaged 8 Check 9 Carburetor 9 See "To Adjust Carburetor" in Service and Adjustments section. 10 Engine valves 10 Contact a Sears or other qualified service center. 1 Dirty air filter. 1 Clean/replace 2 Bad spark plug. 2 Replace 3 Weak or dead battery. 3 Recharge 4 Dirty fuel filter. 4 Replace fuel filter. 5 Stale or dirty fuel. 5 Empty fuel tank and refill tank witlfresh, clean gasoline. 6 Loose or damaged wiring. 6 Check 7 Carburetor out of adjustment. 7 See "To Adjust Carburetor" in Service and Adjustments section. 8 Engine valves out of adjustment. 8 Contact a Sears or other qualified service center. 1 Clutch/brake pedal not depressed. 1 Depress 2 Attachment 2 Disengage 3 Weak or dead battery. 3 Recharge 4 Blown fuse. 4 Replace fuse. 5 Corroded 5 Clean battery terminals. 6 Loose or damaged 6 Check all wiring. 7 Faulty ignition switch. 7 Check/replace ignition switch. 8 Faulty solenoid or starter. 8 Check/replace solenoid 9 Faulty operator switch(es). presence 9 Contact a Sears or other qualified service center. wiring. out of adjustment. out of adjustment. clutch is engaged. battery terminals. wiring. 27 in spark plug. air filter. all wiring. air filter. spark plug. or replace battery. all wiring. clutch/brake pedal. attachment clutch. or replace battery. or starter. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE Engine clicks but will not start Loss of power Excessive vibration Engine continues to run when operator leaves seat with atta= chment clutch engaged CORRECTION 1 Weak or dead battery. 1 Recharge 2 Corroded 2 Clean battery terminals. 3 Loose or damaged 3 Check all wiring. 4 Faulty solenoid 4 Check/replace 1 Cutting too much grass/too 1 Raise cutting height/reducespeed. 2 Throttle 2 Adjust throttle control. 3 Build-up of grass, leaves and trash under mower. 3 Clean underside housing. 4 Dirty air filter. 4 Clean/replace 5 Low oil level/dirty 5 Check 6 Faulty spark plug. 6 Clean & regap or change spark plug. 7 Dirty fuel filter. 7 Replace fuel filter. 8 Stale or dirty fuel. 8 Empty fuel tank and refill tank with fresh, clean gasoline. Water in fuel. 9 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. battery terminals. wiring. or starter. in "CHOKE" fast. position. oil. or replace battery. solenoid or starter. of mower air filter. oil level/change oil. 10 Spark plug wire loose. 10 Connect 11 Dirty engine air screen/fins. 11 Clean 12 Dirty/clogged 12 Clean/replace 13 Loose or damaged 13 Check 14 Carburetor 14 See "To Adjust Carburetor" in Service and Adjustments section. 15 Engine valves 15 Contact a Sears or other qualified service center. muffler. wiring. out of adjustment. out of adjustment. & tighten spark plug wire. engine air screen/fins. muffler. all wiring. 1 Worn, bent or loose blade. 1 Replace 2 Bent blade mandrel. 2 Contact a Sears or other qualified service center. 3 Loose/damaged 3 Tighten loose part(s). Replace damaged parts. 1 Check wiring, switches and connections. If not corrected, contact a Sears or other part(s). Faulty operator-safety control system. 28 presence blade. Tighten blade bolt. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM Poor cut = uneven cutting Mower blades will not rotate Poor grass discharge CAUSE CORRECTION 1 Worn, bent or loose blade. 1 Replace 2 Mower deck not level. 2 Level mower deck. 3 Buildup of grass, leaves, and trash under mower. 3 Clean underside housing. 4 Bent blade mandrel. 4 Contact a Sears or other qualified service center. 5 Clogged mower deck vent from build-up of grass, leaves, and trash around mandrels. 5 Clean around mandrels open vent holes. 1 Obstruction 1 Remove obstruction. 2 Worn/damaged 2 Replace mower drive belt. 3 Frozen idler pulley. 3 Replace idler pulley. 4 Frozen blade mandrel. 4 Contact a Sears or other qualified service center. 1 Engine speed too slow. 1 Place throttle position. 2 Travel speed too fast. 2 Shift to slower speed. 3 Wet grass. 3 Allow grass to dry before 4 Mower deck not level. 4 Level mower deck. 5 Low/uneven tire air pressure. 5 Check tires for proper PSI. 6 Worn, bent or loose blade. 6 Replace/sharpen blade bolt. 7 Buildup of grass, leaves and trash under mower. 7 Clean underside housing. 8 Mower 8 Replace mower drive belt. 9 Blades improperly 9 Reinstall blades sharp edge down 10 Improper 11 11 Clogged mower deck vent holes from buildup of grass, leaves, and trash around mandrels. in clutch mechanism. mower drive drive belt worn. blades installed. used. 29 belt. 10 blade. Tighten blade bolt of mower to control in "FAST" mowing blade. Tighten of mower Replace with blades listed in this manual. Clean around mandrels open vent holes. to TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM Headlight(s) not working (if so equipped) Battery will not charge Loss of drive CAUSE 1 Light switch is "OFF". 1 Turn light switch "ON". 2 Bulb(s) or lamp(s) 2 Replace 3 Faulty light switch. 3 Check/replace 4 Loose or damaged 4 Check wiring 5 Blown fuse. 5 Replace fuse. 1 Bad battery cell(s). 1 Replace 2 Poor cable connections. 2 Check/clean 3 Faulty regulator 3 Replace regulator. 4 Faulty alternator. 4 Replace alternator. 1 Freewheel control in "DISENGAGED" position. 1 Place freewheel control in "ENGAGED" position. 2 Debris on steering equipped). 2 See "CLEANING" in the maintenance section. 3 Motion drive belt worn, damaged, or broken. 3 Replace 4 Air trapped in transmission shipment or servicing. 4 Purge transmission. 5 Axle key missing. Engine "backfires" when turning engine "OFF" Engine dies when tractor is shifted into reverse CORRECTION 1 burned out. wiring. (if so equipped). plate (if during bulb(s) or lamp(s). light switch. and connections. battery. all connections. motion drive belt. Install axle key at rear wheel. See "TO REMOVE WHEEL" in the Service and Adjustments section. Engine throttle control not sel between half and full speed (fast) position before stopping engine. 1 Move throttle control between half and full speed (fast) position before stopping engine. Reverse operation system (ROS) is not "ON" while mower or other attachment is engaged. 1 Turn ignition key to ROS "ON" position. See Operation section. 30 (3 _ _" Z _._0 _.__) -_ o_'= =,,.._,. ._ _ _0 "n o o C Q. _" 0 _ Q_ X I I I I I I Z 31 Garanfia ....................................................... Reglas de Seguridad ................................... Especificaciones del Producto ..................... Montaje/Pre Operaci6n ................................ Operaci6n .................................................... Mantenimiento ............................................. 32 33 36 37 39 46 GARANTiA COMPLETA DOS AltOS PARA EL EQUIPO TRACTOR Programa de Mantenimiento ....................... Servicio y Ajustes ........................................ AImacenamiento .......................................... Identificaci6n de Problemas ........................ Servicio Sears .......................... 46 51 57 58 Contraportada DE CRAFTSMAN Cuando se opera y mantiene de acuerdo con todas las instrucciones que se suministran, si este equipo tractor falla debido a un defecto de material o mano de obra dentro de los dos aflos posteriores a la fecha de compra, Ilame al telefono 1-800-4-MY-HOME® para solicitar la reparaci6n gratuita. Ademas, cuando se opera y mantiene de acuerdo con todas las instrucciones que se suministran, la garantia tambien cubre defectos de material y mano de obra del bastidor y del eje delantero por cinco aflos a partir de la fecha de compra. Esta g,arantia cubre pagara: • • • • • • • • UNICAMENTE defectos de material y mano de obra. Sears NO Componentes de desgaste que se desgasten durante el uso normal, incluso (pero sin limitarse a ello) hojas, bujias, filtros de aire, correas y filtros de aceite. Servicios de mantenimiento est_.ndar, cambios de aceite o afinaciones. Reemplazo o reparaci6n de neum_.ticos por pinchazos causados por objetos externos como clavos, espinas, tocones o vidrios. Reemplazo o reparaci6n de neumaticos o ruedas por el desgaste normal, accidentes o por operaci6n o mantenimiento incorrectos. Reparaciones necesarias por abuso del operador, incluso (pero sin limitarse a ello) daflos causados por remolcar objetos que superen la capacidad del equipo tractor, chocar contra objetos que doblen el bastidor o el cigOeflal o pot sobrepasar la velocidad del motor. Reparaciones necesarias por negligencia del operador, incluso (pero sin limitarse a ello) daflos electricos y mecanicos causados por el almacenamiento incorrecto, pot no usar el grado y la cantidad correctos de aceite de motor, pot no mantener del muelle libre de residuos inflamables o por no mantener el equipo tractor de acuerdo con las instrucciones que contiene el manual del operador. Limpieza o reparaciones del motor (sistema de combustible) cuando se determina que se us6 combustible contaminado y oxidado (sarro). En general, el combustible debe usarse dentro de los 30 dias posteriores a su compra. Deterioro y desgaste normal de los acabados exteriores o sustituci6n de r6tulos de productos. Toda cobertura de garantia de! equipo tractor y la bateria utiliza alguna vez con fines comerciales o de alquiler. Esta garantia se aplica s61o mientras el producto se encuentre Esta garantia le otorga derechos legales especificos, derechos que varfan de un estado a otro. Sears, Roebuck and Co., Hoffman Estates, 32 queda IL 60179 nula si este producto dentro y usted tambien se de los EE.UU. puede tener otros _I_PELIGRO: Esta Maquina cortadora es capaz de amputar objetos, si no se observan las instrucciones de seguridad lesiones graves o la muerte. las manosy siguientes los pies y de lanzar se pueden producir • No maneje la maquina si no tiene la trampa para cesped completa, la canaleta de descarga u otros dispositivos de seguridad en su lugar yen funcionamiento. • Ralentizar antes de girar. • Nunca dejar una maquina encendida sin vigilancia. Apagar siempre las cuchillas, poner el freno de estacionamiento, parar el motor, y quitar las Ilaves antes de bajar. • Desenganche las hojas cuando no este cortando cesped. Apague el motor y espere hasta que todas las partes se detengan por completo antes de limpiar la maquina, retirar la trampa para cesped o destapar la canaleta de descarga. • Hacer funcionar la mgtquina s61o con la luz del dia o luz artificial buena. • No hacer funcionar la mgtquina estando bajo los efectos de alcohol o droga. • Poner atenci6n al trafico cuando se opera cerca de calles o se cruzan. • Poner la maxima atenci6n al cargar o descargar la mgtquina en una caravana o cami6n. • Llevar siempre gafas de protecci6n cuando se hace funcionar la m_tquina. • Los datos indican que los operadores a partir de los 60 aflos est_,n afectados por un gran porcentaje de heridas relativas a la conducci6n del cortacesped. Estos operadores tendrian que evaluar su habilidad de hacer funcionar el cortacesped de modo Io bastante seguro para proteger a si mismos y a otras personas de heridas graves. • Seguir las recomendaciones del fabricante para los pesos y contrapesos de las ruedas. • Mantener la maquina libre de hierba, hojas u otros escombros que pueden tocar el tubo de escape / partes del motor calientes y quemarse. No permitir que el puente del cortacesped cargue hojas u otros residuos que pueden causar acumulaciones. Limpiar toda salpicadura de aceite o carburante antes de hacer operaciones sobre la m_,quina o guardarla. Dejarla enfriar antes de guardarla. II. FUNCIONAMIENTO EN PENDIENTES Las pendientes son el mayor factor de accidentes relativos a la perdida de control y vuelco, que pueden causar severas heridas o muerte. El funcionamiento en pendientes requiere una atenci6n extra. Si no es posible hacer marcha atras en una pendiente o si te sientes incomodo, no la cortes. • Cortar hacia arriba y abajo de una pendiente, no de modo horizontal. • Poner atenciones a los hoyos, las raices, los bultos, las piedras u otros objetos escondidos. El terreno irregular puede volcar la maquina. La hierba alta puede esconder obst_,culos. _DVERTENCIA: Siempre desconecte el alambre de la bujia y p6ngalo donde no pueda entrar en contacto con la bujia, para evitar el arranque por accidente, durante la preparaci6n, el transporte, el ajuste o cuando se hacen reparaciones. _DVERTENCIA: No avance cuesta abajo a punto muerto ya que podria perder el control del tractor. _I_,ADVERTENCIA: Remolque solamente los accesorios recomendados y conformes alas caracteristicas indicadas por el fabricante de su tractor. Tenga cuidado y prudencia al utilizar el tractor. Cuando se encuentre en un declive, oper utilizando exclusivamente la velocidad m&s baja. En caso de un declive una carga excesiva podria resultar peligrosa. Los neum&ticos pueden perder la tracci6n con el suelo y hacerle perder el control de su tractor. _DVERTENCIA: El tubo de escape del motor, algunos de sus constituyentes y algunos componentes del vehiculo contienen o desprenden productos quimicos conocidos en el Estado de California como causa de c&ncer y defectos al nacimiento u otros daflos reproductivos. _DVERTENCIA: Los bornes, terminales y accesorios relativos de la bateria contienen plomo o compuestos de p!omo, productos quimicos conocidos en el Estado de California como causa de cancer y defectos al nacimiento u otros daflos reproductivos. Lavar las manos despues de manipularlos. I. FUNCIONAMIENTO GENERAL • Leer, entender y seguirtodas las instrucciones sobre la m_,quina yen el manual antes de empezar. • No poner las manos o los pies cerca de partes giratorias o debajo de la mgtquina, mantener siempre limpia la abertura de descarga. • Permitir el funcionamiento de la mgtquina s61o a adultos que tengan familiaridad con las instrucciones. • Limpiar el area de objetos como piedras, juguetes, cables, etc. que pueden ser recogidos y disparados con las cuchillas. • Asegurarse de que el area este libre de otras personas antes de ponerla en marcha. Parar la mgtquina si alguien entra en el area. • Nunca Ilevar pasajeros. • No cortar marcha atras al no ser absolutamente necesario. Mirar siempre abajo y delante mientras se procede atrgts. • Nunca dirigir el material descargado hacia nadie. Evitar descargar material contra paredes u obstrucciones. El material podria rebotar hacia el operador. Parar las cuchillas cuando se pasan superficies de grava. 33 • Escoger una velocidad de marcha baja de modo que no sea necesario pararse o cambiar estando en una pendiente. • No cortar la hierba mojada. Las ruedas pueden perder tracci6n. Poner siempre una marcha cuando se est& en pendientes. No poner en punto muerto e ir cuesta abajo. • Evitar arrancar, pararse o girar en una pendiente. Si las ruedas pierden tracci6n, desconectar las cuchillas y proceder despacio cuesta abajo en la pendiente. • Mantener todo los movimientos en las pendientes lentos y gradual. No hacer cambios repentinos de velocidad o direcci6n, ya que pueden causar el escape de la maquina. • Poner la m&xima atenci6n cuando la maquina funciona con captadores de hierba u otros dispositivos enganchados; pueden afectar la estabilidad de la m&quina. No usar en pendientes empinados. • No intentar estabilizar la m&quina poniendo el pie en el terreno. • No cortar cerca de bajadas, cunetas y orillas. Las maquina puede volcarse improvisamente si una rueda est,, en el borde o se hunde. • Nunca permitir que ninos u otras personas esten dentro del equipo por remolcar. • En pendientes, el peso del equipo remolcado puede causar la perdida de tracci6n y la perdida de control. • Viajar despacio y dejar mas distancia para frenar. V. SERVlClO MANIPULACION SEGURA DE LA GASOLINA Para evitar heridas personales o dahos alas cosas, poner el m&ximo cuidado a la hora de manipular la gasolina. La gasolina es extremamente inflamable y los vapores son explosivos. * Apagar todos los cigarrillos, cigarros, pipas y otras fuentes de ignici6n. * Usar s61o contenedores para gasolina aprobados. * Nunca quitar el tap6n de la gasolina o ahadir carburante con el motor en marcha, dejar enfriar el motor antes del abastecimiento de la gasolina. * Nunca abastecer la maquina al interior de un local. * Nunca guardar la maquina o el contenedor del carburante donde haya una llama abierta, chispas o una luz piloto como un calentador de agua u otros dispositivos. * Nunca Ilenar los contenedores al interior de un vehiculo o en una caravana o cami6n recubiertos con un forro de plastico. Colocar siempre los contenedores en el terreno lejos del vehiculo cuando se esta Ilenando. * Quitar el equipo de gas del cami6n o caravana y abastecerlo en el terreno. Si no es posible, abastecer dicho equipo con un contenedor portatil, mas bien que de un surtidor de gasolina. * Mantener la boquilla a contacto del borde del dep6sito de carburante o la abertura del contenedor durante toda la operaci6n de abastecimiento. No utilizar un dispositivo con boquilla cerrada-abierta. * Si se vierte carburante sobre la ropa, cambiarse la ropa inmediatamente. * Nunca Ilenar el dep6sito m&s de Io debido. Volver a colocar el tap6n del gas y cerrar de modo firme. III. NINOS Si el operador no pone atenci6n a la presencia de los ni_os pueden ocurrir accidentes tragicos. Los ninos a menudo estan atraidos por la maquinay las actividad de cortar. No dar por hecho de que los nihos se queden adonde estaban la Qltima vez que los vistes. • Mantener los ni_os fuera del area de corte y vigilados pot un adulto responsable que no sea el operador. • Estar alerta y apagar la m&quina si un ni_os entra en e! area. • Antes y durante la marcha atras, mirar adelante y abajo para vet si hay nihos peque_os. • Nunca Ilevar ninos, incluso si hay las cuchillas apagadas. Podrian caer y herirse seriamente o interferir con el funcionamiento seguro de la maquina, los ni_os que se han Ilevado precedentemente pueden aparecer de pronto en el area de corte pot otro paseo y ser atropellados o tumbados por la m&quina. • Nunca dejar que los nihos manipulen la maquina. • Tenet el maximo cuidado cuando se acerca a cantos ciegos, arbustos, arboles u otros objetos que pueden impedir la vista de nihos. OPERACIONES DE SERVIClO GENERALES • Nunca hacer funcionar la m&quina en un &rea cerrada. • Mantener todas las tuercas y pernos apretados para asegurarse de que trabaja en condiciones seguras. • Nunca modificar los dispositivos de seguridad. Controlar su correcto funcionamiento regularmente. IV. REMOLQUE • Remolcar s61o con una m&quina que tenga un gancho disehado para remolcar. Enganchar el equipo o remolcar s61o en el punto dispuesto al efecto. • Seguir las recomendaciones del productor con respecto a los limites del equipo por remolcar y el remolque en pendientes. 34 • Mantener la maquina libre de hierba, hojas u otros residuos acumulados. Limpiar las salpicaduras de aceite o carburante y quitar cualquier cosa mojada con carburante. Dejar que la maquina se enfrie antes de guardarla. • Si se golpea un objeto ajeno, hay que pararse e inspeccionar la maquina. Reparar, si es necesario, antes de volver a poner en marcha. • Nunca hacer ningQn ajuste o reparaci6n con el motor en funci6n. • Verifique los componentes de la trampa para cesped y la canaleta de descarga con frecuenciay sustituya con repuestos recomendados por el fabricante cuando sea necesario. • Las cuchillas del cortacesped son afiladas. Envolver la cuchilla, ponerse guantes y poner la mgtxima atenci6n cuando se hacen operaclones en elias. • Controlar el funcionamiento del freno frecuentemente. Ajustar y hacer las operaciones de mantenimiento cuando eso sea necesario. • Mantener y sustituir las etiquetas de seguridad e instrucci6n, cuando sea necesario. • Asegurarse de que el area este libre de otras personas antes de ponerla en marcha, para la maquina si alguien entra en el area. • Nunca Ilevar pasajeros. • No cortar marcha atras al no ser absolutamente necesario. Mirar siempre abajo y delante mientras se procede atrgts. • Nunca Ilevar niflos, incluso si hay las cuchillas apagadas. Podrian caer y herirse seriamente o interferir con el funcionamiento seguro de la maquina, los niflos que se han Ilevado precedentemente pueden aparecer de pronto en el area de corte pot otto paseo y ser atropellados o tumbados por la maquina. • Mantener los niflos fuera del area de corte y vigilados por un adulto responsable que no sea el operador. • Estar alerta y apagar la maquina si un niflos entra en el area. • Antes y durante la marcha atrgts, mirar adelante y abajo para ver si hay niflos pequeflos. • Cortar hacia arriba y abajo de una pendiente (15 ° Max), no de modo horizontal. • Escoger una velocidad de marcha baja de modo que no sea necesario pararse o cambiar estando en una pendiente. • Evitar arrancar, pararse o girar en una pendiente. Si las ruedas pierden tracci6n, desconectar las cuchillas y proceder despacio cuesta abajo en la pendiente. • Si la m_tquina se para mientras va cuesta arriba, desconectar las cuchillas, poner la marcha atras y ir hacia atras despacio. • No girar estando en pendientes si no es necesario, y luego girar despacio y gradualmente cuesta abajo, si es posible. 35 ESPECIFICACIONES DEL PRODUCTO Capacidad y Tipo de gasolina: 2.5 Galones Regular Sin Plomo Tipo de Aceite: (API-SG-SL) SAE 10W30 (Sobre 32[oF) SAE 5W30 (Debajo 32 F] Capacidad de Aceite: Con filtro: 51 oz. Sin filtro: 35 oz. Bujla: Velocidad de Champion RC12YC _Abertura: .030") Delante: 0-5.5 Recorrido (MPH): Marcha Atr&s: Sistema de Carga: 15 Amps @ 3600 RPM Bateria: Amp/H r: Min. CCA: Case Size: Torsi6n del Perno de la Cuchilla: ACUERDOS DE PROTECCION PARA LA REPARACION Congratulaciones por su buena compra. Su nuevo producto Craftsman® est& diseflado y fabricado para funcionar de modo fiable por muchos aflos. Pero como todos los productos, puede necesitar alguna reparaci6n de tanto en tanto. En este caso tenet un Acuerdo de Protecci6n para la Reparaci6n puede hacerles ahorrar dinero y fastidios. Compre ahora un Acuerdo de Protecci6n para la Reparaci6n y protegese de molestias y gastos inesperados. Un Acuerdo incluye los puntos siguientes: • Servicio experto de nuestros 12.000 especialistas profesionales en la reparaci6n. • Servicio ilimitado sin cargo alguno para las partes y la mano de obra sobre todas las reparaciones garantizadas. • Sustituci6n del producto si su producto garantizado no puede ser arreglado. • Descuento del 10% sobre el precio corriente del servicio y de las partes relativas al servicio no cubiertas por el acuerdo; tambien el 10% menos sobre el precio corriente de un control de mantenimiento preventivo. • Ayuda rapida pot telefono - soporte telef6nico por parte de un representante Sears sobre productos que requieren un arreglo en casa, y adem&s una programaci6n sobre los arreglos m&s convenientes. Cuando se ha comprado e! Acuerdo, basta con una Ilamada telef6nica para programar el servicio. Puede Ilamar cuando quiera, dia y noche o fijar en linea una cita para obtener el servicio. Sears tiene m&s de 12.000 especialistas profesionales en la reparaci6n, que tienen acceso a m&s de 4.5 millones de partes y accesorios de calidad. Este es el tipo de profesionalidad con que puede contar para ayudar a alargar la vida del producto que acaba de comprar, por muchos aflos, iCompre hoy su Acuerdo de Protecci6n para la Reparaci6n! Se aplican algunas limitaciones y exclusiones. Para eonocer los precios y tenet rnas Inforrnaci6n, Ilame al 1-800=827=6655. SERVIClO DE INSTALAClON SEARS 0-2.4 28 230 U1R 45-55 Ft. Lbs. FELIClTAClONES pot la compra de su tractor. Ha sido diseflado, planificado y fabricado para darle la mejor confiabilidad y el mejor rendimiento posible. En el caso de que se encuentre con cualquier problema que no pueda solucionar f&cilmente, haga el favor de ponerse en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. Cuenta con representantes bien capacitados y competentes y con las herramientas adecuadas para darle servicio o para reparar este tractor. Haga el favor de leer y de guardar este manual. Estas instruc-ciones le permitir&n montar y mantener su unidad en forma adecuada. Siempre observe las "REGLAS DE SEGURIDAD." RESPONSABILIDADES DEL CLIENTE • Lea y observe las reglas de seguridad. • Siga un programa regular de mantenimiento, cuidado y uso de su tractor. • Siga las instrucciones descritas en las secciones "Mantenimiento" y "AImacenamiento" de este Manual del Dueflo. _ADVERTENCIA: Este tractor viene equipado con un motor de combusti6n interna y no se debe usar sobre, o cerca, de un terreno no desarrollado cubierto de bosques, de arbustos o de cesped, o menos que el sistema de escape del motor venga equipado con un amortiguador de chispas que cumpla con las leyes locales o estatales (si existen). Si se usa un amortiguador de chispas, el operador debe mantenerlo en condiciones de trabajo eficientes. En el estado de California, la ley exige Io anterior (Secci6n 4442 del "California Public Resources Code"). Otros estados pueden contar con otras leyes parecidas. Las leyes federales se aplican en la tierras federales. Su centro de Servicio m&s cercano tiene disponible amortiguadores de chispas para el silenciador. (Vea la secci6n de Partes de Repuesto en el manual Ingles del dueflo.) Para la instalacidn profesional Sears de aparatos de casa, puertas de garaje, calentadores de agua y otros importantes articulos para la casa, en U.S.A Ilamar a 1 =800=4=MY=HOME® 36 Hoja de pendiente (1) Tubo de desagee Llaves (2) Llaves Su tractor nuevo ha sido montado en la f&brica con la excepci6n montado por razones de envio. HERRAMIENTAS EL MONTAJE NECESARIAS PARA de aquellas partes que no se han Etiqueta Un juego de Ilaves de tubo facilitar& el montaje. A continuaci6n se enumeran los tamafios de las llaves est&ndar. (1) Llave de 1/2" (2) Llaves de 7/16" Cuchillo Medidor de presJ6n Pinzas Cuando en este manual se mencionan los t@minos "mano derecha" o "mano izquierda" se refiere a cuando usted se encuentra en la posici6n de operaci6n (sentado/a detr&s del volante de direcci6n). PARA REMOVER EL TRACTOR DE LA CAJA DE CARTON AJUSTE EL ASIENTO 1. Sientese sobre el asiento. 2. Levante la palanca del ajuste (A) hacia arriba y mueva el asiento hasta que alcance una posici6n c6moda que le permita presionar completamente sobre el pedal del embrague/freno. 3. Desconecte la palanca para trabar el asiento en la posici6n. DESEMPAQUE LA CAJA DE CARTON 1. Cortar a Io largo de las lineas de puntos en todos los cuatro paneles de cart6n. Remover los paneles de cierre y aplanar los paneles laterales. 2.. Remueva el embalage de cart6n del cap6 y de la rejilla. IMPORTANTE: Revise y remueva todas las grampas en la corredera porqoe pueden perforar las Ilantas en donde el tractor tiene que rodar para salirse de ella. VERIFIQUE 1. LA BATERJA Levante del asiento a la posici6n levantada. AVlSO: Siesta bateria esta utilizada despues del mes y afio indicado sobre la etiqueta (la etiqueta que se encuentra entre los terminales), cargue la bateria por un minimo de una hora a 6-10 amps. (Vea "BATERi,_' en la secci6n de Mantenimento de este manual). • Para instale la bateria, y cable de la bateria, realice el procedimjento descrito en "REEM PLAZAR LA BATE Rl,_' del capitulo de Servicio y Ajustes de este manual. 37 AVlSO: Ahora puede rodar su tractor fuera de la corredera. Siga las siguientes instrucciones para remover el tractor de la corredera. _fLISTA Antes de operar y de disfrutar de su tractor nuevo, le deseamos que reciba el mejor rendimiento y la mayor satisfaccion de este producto de calidad. Haga el favor de revisar la lista a continuacion: _/" Se han completado todas las instrucciones de montaje. _IbADVERTENClA: Antes de empezar, leer, entender y seguir todas las instrucciones presentes en la secci6n Operaciones de este manual. Asegurarse que el tractor este en un &tea bien ventilada. Asegurarse que la zona delante del tractor este libre de otras personas y objetos. v" No quedan partes sueltas v" La bateria est,. preparada PARA HACER RODAR EL TRACTOR FUERA DE LA CORREDERA (Vea la seccion de la operacion para la Iocalidad y la funcibn de los controles) Levante la palanca de levantamiento cesorio a su posici6n mas alta. 2 3 5 Remueva las bandas que sujetan la protecci6n contra la descarga en contra del tractor. Continuar con las siguientes REVISION LLANTAS ha sido ajustado en forma c6moda y apretado en forma segura. v" Todas las Ilantas han sido infladas en forma adecuada. (Para fines de envio, las Ilantas se inflaron demasiado en la fabrica.) _/'AsegOrese que el conjunto segador este nivelado en forma adecuada, de lado a lado y desde adelante hacia atras, para obtener los mejores resultados en el corte. (Las Ilantas tienen que estar infladas en forma adecuada para la nivelaci6n.) _/" Revise las correas de impulsi6n y de la segadora. AsegOrese que recorran el paso adecuado alrededor de las poleas y dentro de todos los fijadores de las correas. _/" Revise el alambrado. Fijese que todas las conexiones todavia esten seguras y que los alambres esten sujetos en forma adecuada. _/" Antes de conducir el tractor, asegOrese que el control de rueda libre este en la posici6n de "transmisi6n enganchada" (Vea "PARA TRANSPORTAR" en la secci6n de la Operaci6n de este manual). instrucciones. DE LA PRESION DE LAS Las Ilantas en su unidad fueron infladas demasiado en la fabrica pot razones de envio. La presi6n de las Ilantas correctas es importante para obtener el mejor rendimiento en el corte. • Reduzca la presi6n de los neum&ticos a la PSI que se indica en estos. REVISION CONJUNTO DE LA NIVELAClON AI mismo tiempo que aprende a como usar su tractor, preste atencion extra a los puntos de importancia que se presentan a continuacion: DEL _/" El aceite del motor tiene que Ilegar al nivel adecuado. Para obtener los mejores resultados en el corte, la caja de la segadora tiene que estar nivelada en la forma adecuada. Vea "PARA NIVELAR LA CAJA DE LA SEGADORA' en la secci6n de Servicio y Ajustes de este manual. REVISION DE LA POSICION DE TODAS LAS CORREAS _/" El estanque de combustible tiene que estar Ileno con gasolina sin plomo regular, nueva y limpia. _/" Familiaricese con todos los controles - su ubicaci6n y su funci6n. Operelos antes de hacer arrancar el motor. ADECUADA _/" AsegL_rese que el sistema de frenos este en una condici6n de operaci6n segura. _/" Asegurarse de que el Sistema de Presencia del Operador y el Sistema de Funcionamiento Atr&s (ROS) funcionan de modo adecuado (Vet las Secciones de Funcionamiento y Mantenimiento en este manual). _/" Es importante purgar la transmisi6n antes de operar su tractor por la primera vez. Siga las instrucciones adecuadas para el empiezo y para purgar (Vea "PARA EMPESAR EL MOTOR" y "PARA PURGAR LA TRANSMISION" en la secci6n de la Operaci6n de este manual. Vea las figuras que aparecen para cambiar las correas de impulsi6n de la cuchilla de la segadora y de movimiento en la secci6n de Servicio y Ajustes de este manual. Verifique que las correas sigan su paso correcto. REVISION DEL SISTEMA y cargada en forma v" El asiento Suelte el freno de estacionamiento presionando el pedal del embrague/freno. Ponga el control de la rueda libre en la posici6n de giro libre para desenganchar la transmisi6n. (Vea "PARA TRANSPORTAR" en la secciSn de Operaci6n de este manual). Haga rodar el tractor hacia delante fuera de la corredera. en la caja de cart6n. adecuada. del ac- 4 DE REVISION DE FRENOS Una vez que usted haya aprendido a manejar su tractor, verifique que el freno funcione correctamente. Ver "PARA VERIFICAR Sl FUNCIONA BIEN EL FRENO" en el capitulo de servicio y ajustes de este manual. 38 Estos simbolos pueden aparecer sobre su tractor o en la literatura proporcionada Aprenda y comprenda sus significados. R MARCHA ATR,_S N H L NEUTRO ALTO BAJO O MOTOR APAGADO ESTRANGULACION SISTEMA FUNCIONAMIENTO ATRAS (ROS) LENTO (@) G MOTOR ENCENDIDO RA,PIDO con el producto. MOTOR ENMARCHA FRENO DE ALTURA ESTAClONAMIENTO DE LA SEGADORA LEVANTAMIENTO DE LA SEGADORA 0 LUCES ENSENDIDAS COMBUSTIBLE BATERIA MARCHA MARCHA ATRAS HACIA ADELANTE PALANCA DE MANDO CRUCERO PEDAL DE FRENO DE EMBRAGUE / ®@®@@ ACCESORIO DEL EMBRAGUE ENGANCHADO ACCESORIO DEL EMBRAGUE DESENGANCHADO PELIGRO, GUARDE LAS MANOS Y LOS PIES LEJOS MANTENGA EL AREA DESPEJADA PELIGROS DE PENDIENTES (Vea la secci6nde las reglas de seguddad) RUEDA LIBRE (Solamente para los modelos automatico) & & & PELIGRO indica un peligro que, si no se evita, provoca muerte o lesiones graves. ADVERTENClA indica un peligro que, si no se evita, puede provocar muerte o lesiones graves. PRECAUCION indica un peligro que, si no se evita, puede provocar lesiones ligeras o moderadas. PRECAUCION cuando se utitiza sin el simboto de aviso, indica una situaci6n que puede provocar daSos al tractor y/o al motor. No seguir las siguientes instrucciones puede provocar heridas o muerte. Los simbotos de aviso de seguridadse utilizan para identificar informaciones de seguridad relativas a peligros que puedenprovocar la muerte, heridas graves y/o da_os a la maquina. SUPERFICIES CALIENTES indica un petigro que, si no se evita, puede provocar la muerte, lesiones graves y/o danos a la maquina. FUEGO indica un petigro que, si no se evita, puede provocar la muerte, lesiones graves y/o danos a la maquina. 39 FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones controles y ajustes. Guarde este manual para referencia en el futuro. de los diversos 03108 Nuestros tractores cumplen con los est&ndares de seguridad del American National Standard Institute. (A) PALANCA DEL LEVANTAMJENTO DEL ACCESORIO - Se usa para levantar, bajar y ajustar el conjunto segador o los dem&s accesorios montados en su tractor. (B) PEDAL DEL FRENO=Se usa para frenar el tractor y para hacer arrancar el motor. (C) PALANCA DEL FRENO DE ESTAClO= NAMIENTO - Asegura el pedal del embrague/ freno en la posici6n del freno. (D) CONTROL DE ACELERACION/ESTRAN= GULACION - Se usa para hacer arrancar y controlar la velocidad del motor. (E) PALANCA DEL EMBRAGUE DEL ACCE= SORIO - Se usa para enganchar las cuchillas segadoras, o los dem&s accesorios montados en su tractor. (F) JNTERRUPTOR DE IGNICION - Se usa para hacer arrancar o hacer parar el motor. (G) S ISTEMA DE FUNCIONAMIENTO HACIA ATRAS (ROS) en posici6n "ON" - Permite la operaci6n del conjunto segador o otto accesorio accionado mientras queen reves. (H) INTERRUPTOR DE LA LUZ - Enciende y apaga las luces delanteras. (J) PALANCA DE MANDO CRUCEROSe utiliza para fijar el movimiento hacia adelante del tractor a la velocidad deseada sin apretar el pedal de marcha atr&s. (K) PEDAL DE MARCHA ADELANTE - Se utiliza para el movimiento del tractor hacia adelante. (L) PEDAL DE MARCHA ATR._S - Se utiliza para el movimiento del tractor hacia atr&s. (M) CONTROL DE RUEDA LIBRE - Desengancha la trans-misi6n para empujar o arrastrar. 4O La operaci6n de cualquier tractor puede hacer que salten objetos extra_os dentro de sus ojos, Io que puede producir da_os graves en estos. Siernpre use anteojos de seguridad o protecciones para los ojos rnientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de se= guridad o una mascara de visi6n arnplia de seguridad usada sobre las gafas. COMO USAR SU TRACTOR PARA AJUSTAR EL FRENO DE ESTACIONA= MIENTO Su tractor viene equipado con un interruptor sensor que exige la presencia del operador. Cuando el motor est& funcionando, si el operador trata de bajarse del asiento sin primero aplicar el freno de estacionamiento, se apagar& el motor. 1. Presione el pedal del freno (B) completamente y sostengalo. 2. Jale hacia arriba la palanca del freno de mano (C) y mantengala en esa posici6n; suelte gradualmente el pedal del freno (B), y luego suelte la palanca del freno de mano. AsegOrese que el freno de estacionamiento va a sujetar el tractor en forma segura. PARADA CUCHILLAS DE LA SEGADORA = pueden hacer que el cesped se ponga "cafe." Para eliminar esta posibilidad, siempre pare el motor cuando pare el tractor en &teas con cesped. _,PRECAUCI6N: Siempre pare el tractor completamente, segOn se ha descrito anteriormente, antes de abandonar la posici6n del operador. PARA USAR EL CONTROL DE LA AOELERAClON Siempre opere el motor a una aceleraci6n completa. • Si el motor funciona a una velocidad inferior a la m&xima (r&pida), su rendimiento disminuye. • El rendimiento 6ptimo se obtiene a la velocidad m&xima (r&pida). MOVERSE HACIA ADELANTE Y HACIA ATRAS La direcci6n y la velocidad de movimientos est&n controlados por los pedales de marcha adelante y atr&s. 1. Poner en marcha el tractor y quitar el freno de mano. 2. Apretar lentamente el pedal marcha adelante (K) y atr&s (L) para iniciar el movimiento. M&s se aprieta el pedal y mayor es la velocidad. • Mueva el interruptor del embrague del accesorio a la posici6n desenganchado. IMPULSION DE RECORRIDO - • Para parar el mecanismo impulsor, presione el pedal del freno/embrague completamente. • Mueva la palanca de cambios a la 3osici6n (E) de neutro. MOTOR • Mueva el control (L) de la aceleraci6n a la posici6n de lento. AVlSO: Si no se mueve el control de la aceleraci6n a la posici6n de lento y se permite que el motor ande en vacio antes de pararlo puede producir la contraexplosi6n del motor. • Gire la Ilave de ignici6n (F)a la posici6n de apagado "STOP" y remueva la Ilave al abandonar el tractor para evitar el uso no autorizado. • Nunca use la estrangulaci6n (C) para parar el motor. IMPORTANTE: Dejando el interruptor de la ignici6n en cualquier posici6n otra que "STOP" causar i que la bateria se descargue (muerta). AVlSO" Bajo ciertas condiciones, cuando el tractor est& parado con el motor andando en vacio, los gases de escape del motor caliente4.1 UTILIZAR EL MANDO CRUCERO El mando crucero se puede utilizar s61o durante la marcha hacia adelante. CARACTERiSTICAS T#CNICAS El control de velocidad crucero s61o debe usarse mientras el tractor este en labores de siega o transportaci6n, moviendose sobre superficies que esten relativamente planas y rectas. Otras condiciones de trabajo, como la poda, que requiere velocidades bajas, podrian desengranar el control de velocidad crucero. No emplee el control de velocidad crucero mientras el tractor se desplaza pot elevaciones, terrenos escarpados o mientras el tractor este en labores de poda o virando. 1. Con el pedal (K) de marcha adelante apretado a la velocidad deseada, mover la palanca de mando de crucero hacia adelante hasta la posici6n "SET" y mantenerla mientras se levanta el pie del pedal, luego soltar la palanca (J) de mando de crucero. Para desconectar el mando de crucero, e pujar la palanca hacia atr&s en la posici6n "OFF", o apretar completamente el pedal del freno. PARAAJUSTARLA ALTURADECORTEDE LA SEGADORA Laposici6nde la palancaelevadora(A)determinaa quealturasecortar&elcesped. • Coloquela palancaelevadoraen la ranura de la alturadeseada. • Desliceel punterodese_alizaci6n(T) hastaesaaltura,demodode recordarlala pr6ximavezquecorteel cesped. La gamade la alturade cortees de aproximadamente1 a 4 pulgadas.Lasalturasse miden desdeel sueloa la puntade la cuchillacuando el motornoestafuncionando.Estasalturasson aproximadasy puedenvariardependiendode lascondiciones delsuelo,delaalturadelcesped y del tipo del cesped que se esta segando. • Elcespedpromedio debecortarseaproximadamentea 2-1/2pulgadasdurantelatemporada fria y sobre3 pulgadasdurantelos meses calurosos.Paraobteneruncespedmassaludabley de mejorapariencia,sieguea menudo y despues de un crecimiento moderado. • Paraobtenere!mejorrendimiento de corte, el cespedquetienemasde 6 pulgadasde alturadebesegarsedosveces.Hagael primercorterelativamente alto;el segundoa laalturadeseada. PARAAJUSTARLAS RUEDASCALIBRA= DORAS Lasruedascalibradoras est&nbienajustadas cuandose encuentranun pocoa distanciadel terrenoal mismotiempoquela segadoraeste a laalturadecortedeseada.Entonceslas ruedascalibradorasmantienenel conjuntosegadoren posici6nparaprevenirel corteraspeo encasitodoslosterrenos. AVlSO:Ajustelasruedascalibradorasconel tractoren unasuperficieniveladaplana. 1. Ajustela segadoraa laalturadecorte deseadaconlamanilladeajustedealtura (Vea"PARAAJUSTARLAALTURADE CORTEDELA SEGADOR,_' en la secci6n de Operaci6nde estemanual). 2. Conla segadoraa la alturadeseadaparala posici6ndecorte,setienenquemontarlas ruedascalibradoras de modoquequeden unpocosobreel suelo. Instalelasruedas calibradorasenel agujeroadecuadoconel pernoconresalto,la arandelade3/8,y la tuercadeseguridadde3/8-16 y aprietelos enformasegura. 3. Repitael procedimiento parael lado opuestoinstalandola ruedacalibradoraen el mismoagujerodeajuste. 42 PARAOPERARLA SEGADORA Sutractorvieneequipadaconuninterruptor sensorqueexigela presenciadeloperador.Si el motorest&funcionando y el embraguedel accesorioest&enganchado y el operadortrata de bajarsedelasiento,se apagar&el motor. Tienequemantenersesentadocompletay centralmente enel asientoparaimpedirque el motorvacileo se apaguecuandoseopere su equipoenterrenodisparejo,&speroo en cerros. 1. Seleccionela alturadecortedeseada. 2. Bajela segadoraconel controldelevantamientodelaccesorio. 3. Hagaarrancarlascuchillasde la segadora enganchando el controldelembraguedel accesorio. PARAPARARLAS CUCHILLASDELA SEGADORA DESENGANCHE EL CONTROLDELEMBRAGUEDELACCESORIO. AI_,PRECAUCI6N: No opere la segadora sin, ya sea, el recogedor de cesped completo en las segadoras asi equipadas o con la protecci6n contra la descarga (S) en su lugar. FUNClONAMIENTO ATRAS Tu tractor est& equipado con el Sistema de Funcionamiento Atr&s (ROS). Cualquier tentativa del operador de viajar marcha atr&s con el embrague puesto apagar& el motor a menos que la Ilave de ignici6n se ponga en la posici6n de "ON" del ROS. ATENCION: Ir marcha atr&s con el embrague puesto para cortar, no es recomendable. Poniendo el ROSen posici6n "ON", para permitir el funcionamiento atr&s con el embrague puesto, se tiene que hacer s61o cuando el operador Io considera necesario para reposicionar la m&quina con el dispositivo embragado. No siegue en reves a menos que sea absolutarnente necesario. USAR EL SISTEMA ATR,_S - DE FUNCIONAMIENTO _ansmisi6n Utilice el tractor solamente si est& seguro de que no ingresaran niflos ni otras personas o animales al &rea donde se va a cortar el cesped. 1. Presionar el pedal freno hasta el fondo. 2. Con el motor en marcha, girar la Ilave del interruptor de la ignici6n en el sentido inverso al de las agujas del reloj hasta la posici6n "ON". 3 Mire hacia abajo y hacia atr&s no s61o antes de ir marcha atras, sino mientras este yendo marcha atras. 4. Presione lentamente el pedal reverso de la impulsi6n para comenzar el movimiento. 5. Cuando el uso del ROS es m&s necesario, de vuelta a la Ilave de ignici6n en el sentido de las agujas del reloj hasta la posici6n "ON". Posici6n ROS "ON" Transmision Enganchada Desenganchada AVlSO: Para proteger el cap6 contra el daflo cuando transporte su tractor en un cami6n o remolcador, asegOrese que el cap6 este cerrado y asegurado al tractor. Use los medios apropiados para amarrar el cap6 al tractor (cuerdas, cordeles, etc.). Motor en posici6n "ON" REMOLQUE DE CARRETILLAS O OTROS ACCESORIOS Remolque solamente los accesorios recomendados y especificados por el fabricante del tractor. Use sentido com0n cuado este remolcando. Las cargas pesadas, cuando este yendo sobre una pendiente, son peligrosas, las Ilantas pueden perder su tracci6n con el terreno y pueden ocasionar que pierda el control de su tractor. ANTES DE HACER ARRANCAR EL MOTOR PARA OPERAR EN CERROS AI::_ADVERTENClA: No maneje hacia arriba o hacia abajo en cerros con pendientes superiores a 15 ° y no maneje atravesando ninguna pendiente. Utilice la guia de la pendiente proporcionada en la parte posteriora de este manual. • Escoja la velocidad m&s lenta antes de arrancar hacia arriba o hacia abajo en cerros. • Evite parar o cambiar la velocidad en cerros. • Si es absolutamente necesario el parar, empuje el pedal de freno r&pidamente a la posici6n de freno y enganche el freno de estacionamiento. • Para volver a empezar con el movimiento, suelte lentamente, el freno de estacionamiento y el pedal de freno. • Apretar despacio el pedal apropiado hasta la posici6n m&s lenta. • Gire siempre lentamente. REVISE EL NIVEL DE ACEITE DEL MOTOR El motor en su tractor ha sido enviado desde la fabrica Ileno con aceite de calidad para verano. 1. Revise el aceite del motor con el tractor en terreno nivelado. 2. Remueva la tapa/varilla indicadora de nivel de relleno del aceite y limpielas, vuelva a insertar la varilla indicadora de nivel y atornille la tapa hasta que quede apretada, espere por unos cuantos segundos, remuevala y lea el nivel del aceite. Si es necesario, agregue aceite hasta que se haya alcanzado la marca Ileno (FULL) en la varilla indicadora de nivel. No Io Ilene demasiado. • Para la operaci6n en clima frio, debe cambiar el aceite para poder arrancar mas facilmente (Vea "Tabla de Viscosidad Del Aceite" en la secci6n de Mantenimento de este manual). • Para cambiar el aceite del motor, vea la secci6n de Mantenimento en este manual. PARA TRANSPORTAR Cuando empuje o arrastre su tractor asegOrese de desenganchar la transmisi6n poniendo el control de la rueda libre en la posici6n de marcha de rueda libre. El control de marcha de rueda libre esta situado en la barra de tracci6n trasera del tractor. 1. Levante la palanca de levantamiento del accesorio a la posici6n m&s alta con el control de levantamiento del accesorio. 2. Tire del mando de la rueda libre hacia afuera y hacia abajo hasta que se coloque en la guia y sueltalo de manera que se mantenga en la posici6n de desenganchada. • No empuje o arrastre el tractor a m&s de dos (2) MPH. • Para volver a accionar la transmisi6n, invierta este procedimiento. 43 5. Inserte la Ilave en la ignici6n y gire la Ilave en el sentido que giran las manillas del reloj a la posici6n de arranque start, y suelte la Ilave tan pronto como arranque el motor. No haga funcionar el arrancador continuamente por m&s de quince segundos por minuto. Si el motor no arranca despues de varios intentarlos, mueva el control de la aceleraci6n a la posici6n de r&pido, espere unos cuantos minutos y trate de nuevo. Si el motor sigue sin funcionar, mueva el control de la aceleraci6n a la posici6n de estrangulaci6n y intente de nuevo. ARRANQUE CON TIEMPO TEMPLADO (50°/10°C Y MAS) 6. Cuando arranque el motor, mueva el control de la aceleraci6n a la posici6n de r&pido. • Los accesorios y el embrague ahora pueden set utilizados. SJ el motor no acepta esta carga, vuelva a arrancar el motor para permitirle que se caliente por un minuto utilizando el estrangulador como describido arriba. ARRANQUE CON TIEMPO FRiO (50 ° Y/10°C MENOS) 7. AI hacer arrancar el motor, mantenga el control de la aceleraci6n a la posici6n de estrangulaci6n hasta que el motor se caliente y empieze funcionar mal. Una vez que empieze a funcionar mal, mueva inmediatamente el control de la aceleraci6n a la posici6n r&pida. El calentamiento del motor puede tomar a partir de varios segundos a varios minutos (cuanto m&s fria es la temperatura, m&s largo es el calentamiento). CALENTAMIENTO PARA LA TRANSMISION AUTOMATICA AGREGUE GASOUNA • Llene el estanque de combustible. Llene hasta la parte inferior del cuello de relleno del estanque de gasolina. No Io Ilene demasiado. Use gasolina regular, sin plomo, nueva y limpia con el minimo de 87 octanos. (El uso de gasolina con plomo aumentar& los dep6sitos de 6xido de plomo y carbono y se reducir& la duraci6n de la v&lvula). No mezcle el aceite con la gasolina. Para asegurar que la gasolina utilizada sea fresca compre estanques los cuales puedan ser utilizados durante los primeros 30 dias. _IbPRECAUCl6N: Limpie el aceite o el combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta. IMPORTANTE: Cuando se opere en temperaturas por debajo de 32°F/10°C use gasolina de invierno limpia y nueva para auedar a asegurar un buen arra,nque en clima frio. PREOAUClON: Combustibles mezclados con alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separaci6n y formaci6n de &cidos durante el almacenamiento. La gasolina acidica puede daSar el sistema del combustible de un motor durante el almacenamiento. Para evitar los problemas con el motor, se debe vaciar el sistema de combustible antes de guardarlo pot un periodo de 30 dias o m&s. Vacie el estanque de combustible, haga arrancar el motor y h&galo funcionar hasta que las lineas del combustible y el carburador queden vacios. La pr6xima temporada use combustible nuevo. Vea las Instrucciones para el AImacenamiento para m&s informaci6n. Nunca use productos de limpieza para el motor o para el carburador en el estanque del combustible pues se pueden producir dahos permanentes. Antes de conducir la unidad en un tiempo frio, la transmisi6n debe set calentada como las instrucciones siguientes: 1. AsegOrese que el tractor este situado en una superficie nivelada. 2. Alivie el freno de estacionamiento y deje que el freno vuelva a la posici6n de operaci6n. 3. Permita que la transmisi6n se caliente durante un minuto. Esto puede ser echo durante el tiempo de calentamiento del motor. • Los accesorios pueden set utilizados durante el periodo del recalentamiento del motor despues que la transmisi6n halla sido calentada. AVlSO: Si se encuentra a mucha altura (sobre 3000 pies) o en clima frio (pot debajo de 32°F/10°C), la mezcla del combustible del carburador debe set ajustada para el mejor rendimiento del motor. (Vea "PARA AJUSTAR EL CARBURADOR" en la secci6n de Servicio y Ajustes de este manual). PARA HACER ARRANCAR EL MOTOR AI hacer arrancar el motor por la primera vez o si se ha acabado el combustible del motor, se necesitar& tiempo para el arranque extra para mover el combustible desde el estanque hasta el motor. 1. AsegOrese que el control de rueda libre este en la posici6n enganchada. 2. Sientase en el sill6n en la posici6n de operaci6n, suelte el pedal del freno y ponga el freno de estacionamiento. 3. Mueva el embrague del accesorio a la posici6n desenganchado disengaged. 4. Mueva la palanca de control de la aceleraci6n a la posici6n de estrangulaci6n. AVlSO: Antes de arrancar, lea las instrucciones siguientes para el arranque en clima frio y templado. 44 RGAR LA TRANSMISI6N PRECAUClON: Nunca enganche o desenganche la palanca del control de rueda libre cuando el motor esta funcionando. Para asegurar la operaci6n y ejecuci6n adecuada, es recomendado que la transmisi6n sea purgada antes de operar el tractor para la primera vez. Este proceso remover& cualquier aire adentro de la transmisi6n que se halla formado durante el transporte de su tractor. IMPORTANTE: Si por acaso su transmisi6n debe ser removida para servicio o reemplazo, debe ser purgada despues de la reinstalaci6n y antes de operar el tractor. 1. Para mayor seguridad, ubique el tractor en una superficie nivelada, despejada de cualquier objeto y abierta, con el motor apagado y el freno de mano puesto. 2. Desenganche la transmisi6n poniendo el control de rueda libre en la posici6n de desenganchado (Vea "PARA EL TRANSPORTE" en esta secci6n de este manual). 3. Sentado en el asiento del tractor, empiece el motor. Despues que este corriendo el motor, mueva el control de estrangulaci6n a la posici6n de, lento. Quitar el freno de mano. _PRECAUCION: En el transcurso del paso 4, puede que de pronto se pongan en movimiento las ruedas. 4. Apretar el pedal de marcha adelante hasta el fondo, mantener por cinco (5) segundos y soltar el pedal. Apretar el pedal de marcha atr&s hasta el fondo, mantener por cinco (5) segundos y soltar el pedal. Repetir el procedimiento tres (3) veces. 5. Apague el motor y embrague el freno de estacionamiento. 6. Enganche la transmisi6n poniendo el control de rueda libre en la posici6n de conducir (Vea "PARA TRANSPORTAR" en esta secci6n del manual). 7. Sentado en el asiento del tractor, empiece el motor. Despues que este corriendo el motor, mueva el control de estrangulaci6n media (1/2) velocidad. Quitar el freno de mano. 8. Conduzca su tractor hacia adelante durante aproximadamente cinco pies y entonces hacia marcha atr&s cinco pies (150 cm). Repita este proceso tres (3) veces. Su transmisi6n esta ahora purgado y dispuesto para la operaci6n normal. Maneje de modo que los recortes se descarguen en el &rea que ya ha sido cortada. Mantenga el &rea de corte a la derecha del tractor. Esto producir& una distribuci6n m&s pareja de los recortes y un corte m&s uniforme. AI segar las &rea grandes, empiece girando a la derecha de modo que los recortes se descarguen, alej&ndose de los arbustos, cercos, entradas de autom6viles, etc. Despues de una o dos vueltas, siegue en la direcci6n opuesta, haciendo virajes a la izquierda, hasta que termine. 00272 • Si el cesped ester demasiado alto, se debe segar dos veces para reducir la carga y los posibles peligros de incendio debido a los recortes secos. Haga el primer corte relativamente alto; el segundo a la altura deseada. • No siegue el cesped cuando est,. mojado. El cesped mojado taponara la segadora y dejara montones indeseables. Permita que se seque el cesped antes de segarlo. • Siempre opere el motor con una acel= eraci6n completa cuando siegue para asegurarse de conseguir un mejor rendimiento y una descarga apropiada de los materiales. Regule la velocidad de recorrido seleccionando un cambio Io suficientemente bajo para obtener un rendimiento de corte de parte de su segadora y tambien la calidad del corte deseada. • Cuando opere con accesorios, seleccione una velocidad de recorrido que se acomode al terreno y le permita obtener el mejor rendimiento del accesorio que se est& usando. CONSEJOS PARA SEGAR • No se pueden usar las cadenas para las Ilantas cuando la caja de la segadora est& adjunta al tractor. • La segadora debe estar nivelada en forma adecuada para obtener el mejor rendimiento al segar. Vea "PARA NIVELAR LA CAJA DE LA SEGADORA" en la secci6n de Servicio y Ajustes de este manual. • El lado izquierdo de la segadora se debe usar para recorte. 45 PROGRAMA DE MANTENIMIENTO Revisar la operaci6n Revisar la presi6n de las Ilantas T Verifi6z la commande R d'operateur j_ Revisar C Afilar/cambiar T Tabla de lubricaci6n 0 Revisar el nivel R Limpiar la baterfa Revisar el enfriamiento Limpie si hay sujetadores CADA 100 HORAS CADA TEMPORADA ALMACENAMIENTO sueltos las cuchillas _3 de la segadora v" y los terminales los residuos del transeje de la placa de direcci6n las correas trapezoidales Del Cortac_spedes el nivel del aceite del motor Cambiar el aceite del motor (con filtro) M Cambiar el aceite del motor (sin filtro) O Limpiar el filtro de aire T Limpiar la rejilla de aire O Inspeccionar R amortiguador Cambiar CADA 50 HORAS de presence Inspeccione Limpiar CADA 25 HORAS et le sistema d ROS La Nivelaci6n Cambiar CADA 8 HORAS del freno Compruebe Revisar ANTES DE CADA USO t/ v' _1,2 v" el silenciador/ de chispas _,2 el filtro de aceite (si equipado) las aletas de enfriamiento la bujfa _,ambiar el cartucho de papel del filtro de aire Cambiar el filtro de combustible 1- Oarnbiar mas a rnenudo cuando se opere bajo carga pesada o en ambmentes con alias temperaturas 2- Dar servicio mAs a menudo cuando se opere en condmciones sucias o polvorosas. 3- Cambiar las cuchillas rnas a menudo cuando se siegue en suelo arenoso. 4- No requerido si equipado con una baterfa Iibre de manienimiento. 5- Vea "LIMPIEZA" en la seccion de Mantenimento de este manual. TABLA DE LUBRICACION RECOMENDACIONES GENERALES La garantia de este tractor no cubre los articulos que han estado sujetos al abuso o a la negligencia del operador. Para recibir todo el valor de la garantia, e! operador tiene que mantener la segadora segOn las instrucciones descritas en este manual. Hay algunos ajustes que se tienen que hacer en forma peri6dica para poder mantener su tractor adecuadamente. AI menos una vez cada estaci6n comprobar si es necesario efectuar los adjustes descritos en las secciones de Servicio y Ajustes de este manual. • Una vez al aho, cambie la bujia, limpie o cambie el filtro de aire y revise si las cuchillas y las correas est_.n desgastadas. Una bujia nueva y un filtro de aire limpio aseguran una mezcla de aire-combustible adecuada y beayudan a que su motor funcione mejor y que dure mas. ANTES DE CADA USO 1. Revise el nivel del aceite del motor. 2. Revise la operaci6n de los frenos. 3. Revise la presi6n de las Ilantas. 4. Verifique que el sistema de presencia del operado y ROS funcionen adecuatamente. 5. Revise si hay sujetadores sueltos. (_) de Grasa del Arbot (_) Accesorio de Grasa det Rodamiento de la Rueda Delantera (_) Plancha det engranaje de Sector de Direcci6n - (_) Accesorio de Grasa del Arbol Accesorio de Grasa det Rodamiento la Rueda Delantera (_) Motor (_ Aceite de motor SAE 30 or 10W30 @ Refierase a la secci6n del "MOTOR" tenimiento en Man IMPORTANTE: No aceite o engrase los puntos pivotes, los que tienen rodamientos de nilSn especiales. Los lubricantes viscosos atraer_.n polvo y mugre, Io que acortara la duraci6n de los rodamientos. Si cree que lubricarse, use solamente un lubricante tipo grafito de polvo seco en forma moderada. 46 CUIDADO DE LA CUCHILLA Para obtener resultados 6ptimos, las cuchillas de la cortadora deben estar afiladas. Reemplace las cuchillas que esten gastadas, dobladas o dafladas. TRACTOR Siempre observe las reglas de seguridad cuando de mantenimiento. OPERAClON DEL FRENO Si el tractor necesita m&s de cinco (5) pies para detenerse a la m&xima velocidad al cambio m&s alto en una superficie nivelada, de hormig6n o pavimentada, hay que hacerle el servicio al freno. Ver"PARA VERIFICAR Sl FUNCIONA BIEN EL FRENO" en el capitulo de Servicio y ajustes de este manual. LLANTAS • Mantengatodos los neum&ticos con la presi6n de aire adecuada (Vet la PSI que se indica en estos). • Mantenga las Ilantas sin gasolina, aceite o substancias quimicas para control de insectos que pueden daflar la goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden daflar alas Ilantas. AVISO: Para arreglar las Ilantas perforadas y pera prevenir que tenga Ilantas pinchadas a causa de pequeflas fugas, puede comprar el sello para Ilantas de su comerciante de partes de repuesto m&s cercano. EIsello previene que las Ilantas se sequen y tambien la corrosi6n. SISTEMA PRESENClAOPERADOR YSlSTEMA FUNClONAMIENTO ATRAS (ROS) Asegurarse de que el sistema de presencia del operador y el sistema funcionamiento atr&s funcionen bien. Si tu tractor no funci6n como descrito, reparar el problema inmediatamente. • El motor no arrancar& si el pedal de embrague/ freno est& completamente presionado y el mando del embrague del accesorio est& desconectado: VE_RIFIEZ SlSTEMA PRESENCIA OPERADOR REMOClON DE LA CUCHILLA 1. Levante la segadora a su posici6n m&s alta para permitir el acceso a las cuchillas. AVlSO: Proteja sus manos con guantes y/o envuelva la cuchilla con una tela gruesa. 2. Remueva el perno de la cuchilla dandole vueltas en el sentido inverso al de las agujas del reloj. 3. Instale la nueva cuchilla con el estampado "THIS SIDE UP" en la direccion de la segadora y del conjunto del mandril. IMPORTANTE: Para asegurar la instalacion apropiada, posicione el agujero central de la cuchilla con la estrella del conjunto del mandril. 4. Instale y apriete el perno de la cuchilla firmemente (Par 45-55 pies/libras). IMPORTANTE: El perno especial de la cuchilla es termotratado. Estretla \ Agujero Central Cuchitla Perno de la _ Cuchitla "t_ Conjunto del Mandril BATERiA Su tractor cuenta con un sistema de carga de la bateria que es suficiente para el uso normal. Sin embargo, si se carga la bateria peri6dicamente, con un cargador de autom6viles, se prolongar& su duraci6n. • Mantenga la bateria y los terminales limpios. • Mantenga los pernos de la bateria apretados. • Mantenga los agujeros de ventilaci6n pequeflos abiertos. • Vuelva a cargar de 6-10 amperes pot 1 hora. AVlSO: La bateria del equipo original de su tractor no becesita servicio. No intente abrir o remover las tapas o cubiertas. No esnecesario afladir o verificar el nivel del electr61ito. PARA LIM PIAR LA BATER iAY LOS TERM INALES • Cuando el motor est& en marcha, cualquier tentativa del operador de abandonar el asiento sin haber puesto el freno de estacionamiento primero, apagar& el motor. • Cuando el motor est& en marcha y el embrague del accesorio est& conectado, cualquier tentativa del operador de abandonar el asiento, apagar& el motor. • El embrague del accesofio no tendria que funcionat nunca si el operador no est& en su asiento. VI=RIFIEZ SISTEMA FUNOIONAMIENTOATR/_,S (ROS) • Cuando el motor est& en marcha con el interruptor de Ilave en posici6n de motor "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, apagar& el motor. • Cuando el motor est& en marcha con el interruptor de Ilave del sistema de funcionamiento atr&s (ROS) en la posici6n "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, NO apagar& el motor. Posici6n ROS "ON" Motor en posici6n "ON" (Operaci6n Normal) La corrosi6n y la mugre de la bateria y de los terminales pueden producir "escapes" de potencia en la bateria. 1. Remueva la protecci6n de los terminales. 2. Desconecte el cable de la bateria NEGRO primero y luego el cable de la bateria ROJO y remueva la bateria del tractor. 3. Enjuague la bateria con agua corriente y sequela. 4. Limpie los terminales y los extremos del cable de la bateria con un cepillo de alambre hasta que queden brillantes. 5. Cubra los terminales con grasa o parafina. 6. Reinstale la bateria (Vea "Reemplazar la Bateria" en la secci6n de Servicio y ajustes de este manual). 47 ENFRIAMIENTO DEL TRANSEJE Las aletas de enfriamiento y el ventilador de la transmisi6n tienen que mantenerse limpios para asegurar el enfriamiento adecuado. No trate de limpiar el ventilador o la transmisi6n cuando el motor este funcionando o mientras la transmisi6n este caliente. • Inspeccione el ventilador de enfriamiento para asegurarse que las aspas del ventilador esten intactas y limpias. • Inspeccione las aletas de enfriamiento paraverificar si hay mugre, recortes de cesped u otros materiales. Para impedir daflos alas juntas, no use un rociador de aire compresado o de alta presi6n para limpiar las aletas de enfriamiento. NIVEL DEL FLUIDO DE LA BOMBA DEL TRANSEJE El transeje ha sido sellado en la f&brica y el mantenimiento del fluido no es necesario para la vida del transeje. En el caso de que el transeje se filtrase o necesitase servicio, haga el favor de ponerse en contacto con un centro de servicio Sears o con un otro centro de servicio cualificado. CORREAS V Revise las correas V para verificar si existe deterioro y desgaste despues de 100 horas de operaci6n y c&mbielas si es necesario. Las correas no son ajustables. Cambie las correas si empiezan a deslizarse debido al desgaste. MOTOR LUBRICACION Use solamente aceite de detergente de alta calidad clasificado con la clasificaci6n SG-SL de servicio API. Seleccione la calidad de viscosidad del aceite SAE segOn su temperatura de operaci6n esperada. CAHDADES F C 3AMA -20 -10 0 -20 DE TEMPERATURA DE VmSCOSmDAD 30 -10 ANTICIPADA 32 40 0 60 1'0 ANTES DE SAE DEL 80 100 20 PROXIMO 10 CAMBIQ 40 DE ACEITE oil vise chart4 s Cambie el aceite despues de 50 horas de operaci6n o por Io menos una vez al aflo si el tractor se utiliza menos 50 horas el aflo. Revise el nivel del aceite del carter antes de arrancar el motor y despues de cada ocho (8) horas de uso continuado. PARA CAMBIAR EL ACEITE DEL MOTOR Determine la gama de la temperatura esperada antes de cambiar el aceite. Todo el aceite debe cumplir con la clasificaci6n de servicio API SG-SL • AsegOrese que el tractor este en una superficie nivelada. • El aceite se drenar& m&s f&cilmente cuando este caliente. • Recoja el aceite en un envase adecuado. 1. Remueva la tapa/varilla indicadora de nivel para relleno del aceite. Tenga cuidado de no permitir que la mugre entre en el motor cuando cambie el aceite. 2. 3. 4. Quite el casquillo amarillo de la parte inferior de la v&lvula de desagOe e instale el tubo de desagQe sobre la guarnici6n. Abra la v&lvula de desagQe empujando hacia dentro y dando vuelta a la izquierda. Para abrirse, tire hacia fuera la v&lvula de desagOe. V&Ivuta de desagOedet aceite __Tu Posici6n cerrada y btoqueada bo de f desagOe Casquillo 5. Despues de que el aceite haya drenado totalmente, cerrar y bloquee la valvula de desagOe empujando hacia dentro y dando vuelta en sentido de las agujas de un reloj hasta que la clavija esta en la posici6n bloqueada segQn Io mostrado. 6. Remueva el tubo de desagOe y substituya el casquillo sobre la guarnici6n inferior de la valvula de desagOe. 7. Vuelva a Ilenar el motor con aceite a traves del tubo de la varilla indicadora de nivel para relleno del aceite. Vacielo lentamente. No Io Ilene demasiado. Para la capacidad aproximada vea las "Especificaciones del Producto" secci6n de este manual. 8. Use un medidor en la tapa/varilla indicadora del nivel para relleno del aceite para revisar el nivel. Para la lectura exacta, inserte la varilla indicadora de nivel en el tubo y empQjela hacia abajo firmemente en su sitio antes de quitarla. Mantenga el aceite hasta, pero no encima, de la marca de Ileno "FULE' de la varilla indicadora de nivel. Empuje la varilla hacia abajo firmemente en el tubo cuando termine. FILTRO DE AOEITE DEL MOTOR Cambie el filtro de aceite del motor cada temporada ovez por medio que cambie el aceite, si el tractor se usa m&s de 100 horas en un aflo. FILTRO DEL AIRE Su motor puede sufrir averias y funcionar de manera incorrecta con un filtro del aire sucio. Dele servicio al filtro de aire mas a menudo si se usa en condiciones polvorosas. Vea la manual de la motor. LIMPIEZA DE LA ENTRADA DE AIRE/AREAS DE ENFRIAMIENTO Para asegurar un enfriamiento adecuado, asegQrese que la rejilla del cesped, las aletas de enfriamiento, y otras superficies externas del motor se mantengan limpias en todo momento. Cada 100 horas de operaci6n (mas a menudo bajo condiciones extremadamente polvorosas o sucias), remueva la caja del ventilador y otras tapas de enfriamiento. Limpie las aletas de enfriamiento y las superficies externas, segQn sea necesario. AsegQrese que se vuelvan a instalar 4.81as tapas de enfriamiento. AVlSO:Si se operala maquinaconunarejilla delcespedbloqueada,sucia,o conlasaletas deenfriamiento taponadas,y/olastapasde enfriamiento removidasse produciradafloenel motordebidoal calentamiento excesivo. LIMPIEZADE LA REJILLA DE AIRE LIMPIEZA • Limpie todo material extraflo del motor, la bateria, el asiento, el pulido, etc. • Limpie los desechos de la placa guia. Los desechos pueden limitar el movimiento del eje del pedal del freno/embrague, Io que har& que patine la correa y que se pierda la tracci6n. _PRECAUCl6N: Evite todos los puntos de enganche y las piezas m6viles. La reji!la de aire debe mantenerse sin mugre y paja para evitar el daflo al motor debido al sobrecalentamiento. Limpiela con un cepillo de alambre o con aire comprimido para remover la mugre y las fibras de goma secas, pegadas. Pedal Del SlLENClADOR Inspeccione y cambie el silenciador corroido y el amortiguador de chispas (si viene equipado) pues pueden crear un peligro de incendio y/o daflos. BUJiA(S) Cambie las bujia(s) al comienzo de cada temporada de siega o despues de cada 100 horas de operaci6n, Io que suceda primero. El tipo de bujia y el ajuste de la abertura aparecen en "ESPECIFICACIONES DEL PRODUCTO" secci6n de este manual. FILTRO DE COMBUSTIBLE EN LINEA El filtro de combustible debe cambiarse una vez cada temporada. Si el filtro de combustible se tapona, obstruyendo el flujo del combustible hacia el carburador, es necesario cambiarlo. 1. Con el motor frio, remueva el filtro ytapone las secciones de la linea de combustible. 2. Ponga el filtro de combustible nuevo en su posici6n en la linea de combustible con la flecha seflalando hacia el carburador. 3. Aseg0rese de que no hayan fugas en la linea del combustible y que las grapas esten colocadas en forma adecuada. 4. Inmediatamente limpie toda la gasolina derramada. SISTEMA DE DIRECCI6N, SALPICADERO, GUARDABARROS Y SEGADORA NO MOSTRADOS • Mantenga las superficies pulidas y las ruedas sin derrames de gasolina, aceite, etc. • Proteja las superficies pintadas con cera tipo automotriz. No recomendamos que se utilice una manguera de jardin o agua a presi6n para limpiar el tractor a no set que el motor y la transmisi6n esten cubiertos para protegerlos del agua. El agua en el motor y la transmisi6n acortan la vida 0til del tractor. Utilizar aire comprimido o un soplador de hojas para remover hierba, hojas y basura del tractor y cortacespedes. Abrazadera 49 PUERTO DE LAVADO DE LA CUBIERTA La cubierta de su tractor est& equipada con un puerto de lavado sobre la superficie que forma parte del sistema de lavado de la cubierta. Se deberia utilizar cadavez que se haya usado el tractor. . Lleve el tractor a un lugar horizontal y despejado de su cesped, Io bastante cerca de una boca de riego como para que Ilegue la manguera del jardin. IMPORTANTE: Aseg0rese de que descarga del tractor est& orientada su casa, garaje, coches aparcados, la boca de ensacado o cubierta de est& acoplada. 2. 3. 4. 10. Lleve el tractor a una zona seca, preferentemente de cemento o pavimentada. Conecte la toma de fuerza de la cubierta de la segadora para quitar el exceso de agua y ayudar a que se seque antes de guardar el tractor. _ la boca de LEJOS de etc. Quite mantillo si • Sustituya inmediatamente el accesorio de lavado roto o que falta antes de volver a usar la segadora. • Tape todos los orificios de la segadora con pernos y tuercas de seguridad. Aseg0rese de que la toma de fuerza (engranaje de la hoja) no est& conectada, ponga el freno de estacionamiento y apague el motor. Enrosque el adaptador de la boquilla (empaquetado con el manual del operador del tractor) en el extremo de la manguera del jardin. Eche hacia atr&s la abrazadera de cierre del adaptador de la boquilla y empuje este en el puerto de lavado de la cubierta en el extremo izquierdo de la cubierta de la segadora. Suelte la abrazadera de cierre para fijar el adaptador en la boquilla. Mang Puerto de Lavado Adaptador de Boq IMPORTANTE: Tire de la manguera para asegurarse de que la conexi6n est& bien fija. . 6. Abra la Ilave del agua. Desde la posici6n del operador del tractor, vuelva a arrancar el motor y ponga la palanca de aceleraci6n en la posici6n "Fast" (r&pido). IMPORTANTE: Vuelva a comprobar la zona para asegurarse de que est& despejada. 7. 8. 9. lavado est_ roto Sio elnoaccesorio est,, Ud. dey ADVERTENCIA: otras personas estaran expuestos a que la hoja les lance aquellos objetos con los que entre en contacto. Ponga la toma de fuerza del tractor (engranaje de la hoja) en la posici6n ON. Mantengase en la posici6n del operador con la cubierta de corte acoplada hasta que la cubierta este limpia. Ponga la toma de fuerza del tractor (engranaje de la hoja) en la posici6n OFR Gire la Ilave de encendido a la posici6n STOP para apagar el motor del tractor. Cierre la Ilave del agua. Tire hacia atr&s la abrazadera de cierre del adaptador de la boquilla para desconectar el adaptador del puerto de lavado de la cubierta. 50 SERVlCIO O DE HACEREVITAR ADVERTENCIA:PARA AJUSTES: LESIONES SERIAS, ANTES DE DAR CUALQUIER 1. Presione el pedal de freno completamente y aplique el freno de estacionamiento. 2. Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED). 3. Ponga la Ilave de ignici6n en la posici6n de apagado (STOP) y remuevala. 4. AsegQrese que las cuchillas y que todas las partes movibles se hayan detenido comple. tamente. 5. Desconecte el alambre de la bujia y p6ngalo en donde no pueda entrar en contacto con esta PARA DESMONTAR DE CESPED 1. 2. 3. 4. 5. 6. 7. LA IMPORTANTE: Si se monta un accesorio diferente del cortacesped al tractor, hay que quitar el estribo frontal (E) y los estribos traseros de elevaci6n (C) del tractor y enganchar el resorte de embrague (Q) en la guia del cable en el borde frontal del salpicadero m&s bajo. INSTALE LA SEGADORA AsegL_rese de que el tractor se encuentre en una superficie nivelada, y ponga el freno de mano. 1. Haga descender la palanca elevadora a su posici6n m&s baja. CORTADORA Suelte el embrague poniendolo en la posici6n "DISENGAGED" ("DESACTIVADO"). Baje la palanca elevadora de montaje a la posici6n de m&s abajo. Ruede la correa de polea del motor (M) y fijadors de la correa (G). Retire el resorte de sujeci6n (K), deslice la abrazadera (L) hasta quitarla, y saque a presi6n la guia de la caja (P) hasta que se salga del soporte. Retire el resorte del cable del embrague (Q) del brazo del engranaje (R). Desconecte la pieza de uni6n anterior (E) de la cortadora - retire el resorte de contenci6n y la arandela. Por uno de los lados de la cortadora, desconecte el brazo de suspensi6n de la cortadora (A) del chasis y la pieza de uni6n posterior (C) de la barra posterior de la cortadora (D) - retire los resortes de contenci6n y las arandelas. CUIDADO: La palanca elevadora funciona a resorte. Sujetela con fuerza, h&gala descender lentamente y tr&nquela en la posici6n m&s baja. NOTA: Cerci6rese de que los brazos de suspensi6n de los lados de la segadora (A) esten dirigidos hacia adelante antes de deslizarla pot 2. Deslice la SEGADORA por debajo del tractor hasta que quede bien centrada debajo de este. 3. FIJE LOS BRAZOS DE SUSPENSION LATERALES DE LA CORTADORA (A) AL CHASIS - Ubique el orificio del brazo encima de la clavija (B) que hay en la parte exterior del chasis del tractor, y fijelo con una resorte de contenci6n. CUIDADO: Una vez que se desconecten las piezas de uni6n posteriores, la palanca elevadora funcionar& a resorte. Sujete con fuerza la palanca elevadora al cambiarla de posici6n. 8. Deslice la cortadora por debajo del lado derecho del tractor. ® 03042tex 51 , 5. 6. 7. 8. Realice el mismo procedimiento en el otro lado del tractor. FIJE LAS PIEZAS DE PROPULSION POSTERIORES (C) - Levante la parte posterior de la cortadora, ubique la ranura de la pieza de uni6n (D) pot encima de la clavija que hay en la barra posterior de la cortadora y fijela con una arandela y un resorte de contenci6n. 9. Retire el resorte de sujeci6n (K), deslice la abrazadera (L) hasta quitarla, y saque a presi6n la guia de la caja (P) hasta que se salga del soporte. 10. Instale la correa pasandola por encima de la polea del motor (M) y fijadors de la correa (G). IMPORTANTE: Verifique que la correa encaje bien en todas las ranuras de las poleas de la cortadora. 11. Suba la palanca elevadora a la posici6n de m_.s arriba. 12. Si es necesario, ajuste las rueditas del calibre antes de poner en funcionamiento la cortadora, como se ilustra en el capitulo de Manejo de este manual. FIJE LA PIEZA DE UNION ANTERIOR (E) - Trabaje por el lado izquierdo del tractor. Introduzca el extremo de la barra de la pieza de uni6n pot el orificio anterior de la barra de suspensi6n anterior del tractor (F). Introduzca el otto extremo de la pieza de uni6n (E) en el orificio que se encuentra en la barra anterior de la cortadora (H), y fijelo pot medio de una arandela y un resorte de contenci6n (J). Retire el resorte del cable del embrague (Q) del brazo del engranaje (R). ® 03042tex 52 PARA NIVELAR LA SEGADORA Aseg_rese de que los neum&ticos esten inflados a la PSI que se indica en estos. Si est&n demasiado inflados o poco inflados, el cesped no le quedar& bien cortado, Io cual podr& Ilevarlo a pensar que la S EGADORA no est& bien regulada. REGULACION VISUAL DE LADO A LADO 1. Si todos los neum&ticos est&n correctamente inflados y el cesped parece haber quedado cortado desparejo, determine que lado de la cortadora est& cortando m&s al ras. 2. Con una Ilave inglesa de 3/4" o de calibre regulable, haga girar hacia la izquierda la tuerca de ajuste de la pieza de uni6n (A) para bajar lado izquierdo la cortadora, o bien h&gala girar hacia lado derecho la derecha para subirla. NOTA: Cada vuelta completa de la tuerca de ajuste hat& variar la altura de la cortadora aproximadamente 3/1 6". Haga girar la tuerca hacia la derecha para segadora 5. Vuelva a verificar las medidas y ajuste nuevamente, en caso necesario, hasta que ambos lados queden iguales. AJUSTE DE DELANTE A ATR,_S IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. Para que el cesped le quede perfectamente cortado, las cuchillas de la cortadora deben ajustarse de tal manera que la punta anterior quede 1/8" a 1/2" m&s abajo que la punta posterior cuando la cortadora se encuentre en su posici6n m&s alta. _IbCUIDADO: Las cuchillas son afJladas. Protejase las manos con guantes o envuelva las cuchillas con tela gruesa, o bien haga ambas cosas. • Suba la SEGADORA a la posici6n m&s alta. • Ubique cualquiera de las hojas de la cuchilla de tal manera que la punta quede apuntando directamente hacia adelante. Mida la distancia (B) que hay entre la punta anterior y el suelo y entre la punta posterior y el suelo. • Si la punta anterior de la hoja de la cuchilla no est& 1/8" a 1/2" m&s abajo que la punta posterior, dirijase a la parte de adelante del tractor. • Con una Ilave inglesa de 11/16" o de calibre regulable, afloje la tuerca A, d&ndole varias vueltas para despejar la tuerca de ajuste B. • Con una Ilave inglesa de 3/4"o de calibre regulable, haga girar la tuerca de ajuste de la pieza de uni6n anterior (B) en sentido horario (ajustar) para elevar la parte de adelante de la cortadora, o bien en sentido antihorario (aflojar) para bajarla. Haga girar la tuerca hacia la izquierda bajar la gadora 3. Pruebe la regulaci6n realizada cortando cesped que ann no haya cortado y observando c6mo queda. Vuelva a ajustar, en caso necesario, hasta obtener resultados satisfactgrios. REGULACION DE LA PRECISION DE LADO A LADO 1. Con todos los neum&ticos correctamente inflados, estacione el tractor a nivel del suelo o en la entrada a la casa. CUIDADO: Las cuchillas son afiladas. Protejase las manos con guantes o envuelva las cuchillas con tela gruesa, o bien haga ambas cosas. 2. Suba la SEGADORA a la posici6n m&s alta. 3. A ambos lados de la cortadora, ubique la cuchilla hacia un lado y mida la distancia (A) que hay entre el borde inferior de la cuchilla y el suelo. Dicha distancia debe ser la misma a ambos lados. 4. En caso que sea necesario realizar un ajuste, lea los paso 2 de las instrucciones de Regulaci6n Visual que aparecen m&s arriba. Ajuste {atuerca de regutaci6n de aitura B ,_ _. I[-,,-7--f_ __"i segadora "_-'_'_ _ - _ 02950 Afloje {atuerca _ de regutaci6n de aitura B para _Afloje {atuerca A primero NOTA: Cada vuelta completa de la tuerca de ajuste har& variar la altura de la cortadora 1/8". • Vuelva a verificar las medidas y ajuste nuevamente, en caso necesario, hasta que la punta anterior de la hoja de la cuchilla quede 1/8" a 1/2" m&s abajo que la punta posterior. • Mantenga en la posici6n la tuerca de ajuste pot medio de una Ilave inglesa, y apriete bien la tuerca contra dicha tuerca de ajuste. lA 53 PARA CAMBIAR LA CORREA DE IMPULSION DE LA CUCHILLA SEGADORA La correa de impulsi6n de la cuchilla segadora se puede cambiar sin herramientas. Estacione el tractor en una superficie nivelada. Enganche el freno de estacionamiento. REMOCION DE LA CORREA 5. Retire la correa de la polea del motor moviendola hacia abajo (E). 6. Deslice la correa hacia la parte de atr&s del tractor, retirela de la placa de direcci6n (F) y quitela del tractor. MONTAJE DE LA CORREA 1. 1. Remueva la segadora del tractor (Vea "PARA REMOVER LA SEGADOR,_' de esta secci6n de este manual). 2. Haga salir la correa de las poleas del mandril y de las poleas de guia. 3. Tire la correa alejandola de la segadora. INSTALACION DE LA CORREA 1. 2. 3. 2. 3. Haga rodar la correa alredeor de ambas poleas del mandrin y de las poleas-guias. AsegOrese las correas esten en todas las ranuras de las peleas y al interior todas las guias de la correa. Instale la segadora (vea" PARA INSTALAR LA SEGADORA" en esta secci6n de este manual). Potea Det Mandril 4. 5. 6. Poteas De Guia 5. Polea Det Mandril 03043 PARA CAMBIAR LA CORREA DE IMPULSION DE MOVIMIENTO Estacione el tractor en una superficie nivelada. Ponga el freno de mano. Si necesita asistencia, del lado de abajo del apoyapies hay una guia practica para el montaje de la correa. DESMONTAJE DE LA CORREA 1. Desmonte la cortadora (Vet "PARA DESMONTAR LA CORTADOR,_' en este capitulo del manual). NOTE: Observe toda la correa de impulsi6n de movimiento y la posici6n de todas las guias y guardacorreas. 2. Retire la correa del pi_6n estacionario (A) y del pi_6n de embrague (B). 3. Retire la correa del pi_6n central (C). 4. Jale el cable de la correa hacia la parte de atra.s del tractor. Con mucho cuidado, retire la correa de la polea de entrada de la transmisi6n, moviendola hacia arriba y pasa.ndola por encima de las paletas del ventilador (D). 54 Instale la correa nueva de la parte de atr&s a la parte de adelante del tractor, pas&ndola por encima de la placa de direcci6n (F) y del v&stago del pedal del embrague / freno (G). Jale la correa hacia la parte de adelante del tractor y p&selo por sobre la polea del motor (E). Jale la correa hacia la parte de atr&s del tractor. Con mucho cuidado, mueva la correa hacia abajo y p&sela alrededor del ventilador de transmisi6n y por encima de la polea de entrada (D). Cerci6rese de que la correa este calzada dentro del guardacorrea. Coloque la correa sobre el pi56n central (C). Pase la correa a traves del pi56n estacionario (A) y del pi56n del embrague (B). AsegQrese de que la correa calce en todas las ranuras de las poleas y dentro de todas las guias y guardacorreas.. Instale la SEGADORA (Ver"PARA MONTAR LA SEGADOR,_' en este capitulo del manual). CONTROLAR Y AJUSTAR PARA HACER ARRANCAR EL MOTOR CON UNA BATERiA BAJA _ADVERTENClA: Las baterias de &cido-plomo generan gases explosivos. Mantenga las chispas, las llamas y los materiales para fumar alejados de las baterias. Siempre use una protecci6n para los ojos alrededor de las baterias. Si su bateria est& demasiado baja como para hacer arrancar el motor tiene que volverse a cargar. (Vea "Bateria" en la secci6n de Mantenimiento de este manual). Si se usan "cables de empalme" para un arranque de emergencia, siga este procedimiento: IMPORTANTE: Su tractor esta equipado con un sistema de 12 volts. El otto vehiculo tambien tiene que tenet un sistema de 12 volts. No use la bateria de su tractor para hacer arrancar a otros vehiculos. PARA ADJUNTAR LOS CABLES DE EL FRENO Si el tractor exige m&s de cinco (5) pies para pararse a una velocidad m&s alta en el cambio m&s alto en una superficie nivelada de hormig6n seco o pavimentada, entonces se debe controlar y ajustar el freno. CONTROL DEL FRENO 1. Aparcar el tractor en una superficie nivelada de hormig6n seco o pavimentada, presionar el pedal del freno hasta el fondo y accionar el freno de estacionamiento. 2. Desembragar la transmisi6n colocando el mando de la rueda libre en la posici6n "transmisi6n desembragada". Tirar el mando de la rueda libre fuera y dentro la ranura y soltar asi se coloca en la posici6n desembragada. Las ruedas traseras tiene que bloquearse y patinar cuando se intenta empujar hacia adelante el tractor manualmente. Si las ruedas traseras giran, es necesario ajustar el freno o sustituir las zapatas. EMPALME 1. Conecte cada extremo del cable ROJO con el terminal (A-B) POSITIVO (+) de cada bateria, preocup&ndose de no hacer cortocircuito en el chasis. 2. Conecte un extremo del cable NEGRO con el terminal (C) NEGATIVO (-) de una bateria completamente cargada. 3. Conecte el otro extremo del cable (D) NEGRO con un buena CONEXION A TIERRA DEL CHASIS, alejado del estanque de combustible y de la bateria. PARA REMOVER LOS CABLES, INVlERTA EL ORDEN IMPRESI6N / INCLINAClON DE LAS RUEDAS DELANTERAS La impresiSn e inclinaci6n de las ruedas delanteras de su nuevo tractor vienen asi de f&brica y son normales. La impresi6n y la inclinaci6n de las ruedas delanteras no son regulables. En caso que se produzca algOn daflo que afecte la impresi6n o la inclinaci6n de las ruedas delanteras tal como vinieron de f&brica, p6ngase en contacto con un centro de servicios Sears u otto centro de servicios autorizado. PARA REMOVER LAS RUEDAS PARA HACER REPARAClONES 1. Bloquee el eje en forma segura. 2. Remueva la cubierta del eje, el anillo de retenci6n y las arandelas para permitir la remoci6n de las ruedas (la rueda trasera contiene una Ilave cuadrada - no la pierda). 3. Repare la Ilanta y vuelvala a montar. AVlSO: En las ruedas traseras solamente: alinee las ranuras en el cubo de la rueda trasera en el eje. Inserte la Ilave cuadrada. 4. Vuelva a colocar las arandelas e inserte el anillo de retenci6n en forma segura en la ranura del eje. 5. Vuelva a colocar la cubierta del eje. AVlSO: Para arreglar las Ilantas perforadas y pera prevenir que tenga Ilantas pinchadas a causa de pequeflas fugas, comprar de su commerciante Sears y utilizar el sello para Ilantas. Elsello previene que las Ilantas se sequen y tambien la corrosi6n. 1. El cable NEGRO primero del chasis y luego de la bateria completamente cargada. 2. El cable ROJO al Oltimo de ambas baterias. Bateria Debil o Descargada Arandetas Anillo de Retenci6n Cubierta del eje Llave Cuadrada (rueda trasera sotamente) _..._ 55 Bateria Comptetamente Cargada ENTRECIERRE Y RELES El alambrado suelto o daflado puede producir el mal funcionamiento de su tractor, o que deje de funcionar, o le impida el arrancar. • Revise el alambrado. Vea el diagrama del alambrado electrico en la secci6n de Partes de Repuesto. PARA CAMBIAR EL FUSIBLE C&mbielo por un fusible tipo enchufable de 30 amps, tipo automotriz. El sujetador del fusible est& ubicado detr&s del tablero. REEMPLAZAR LA BATERIA o_IbsADVERTENCIA: No haga cortocircuito con terminales de la bateria al permitir que una Ilave de tuerca o cualquier otro objeto entre en contacto con ambos terminales a la misma vez. Antes de instalar la bateria remueva las pulseras de metal, los relojes de pulsera de metal, los anillos, etc. El terminal positivo tiene que conectarse primero para evitar las chispas debido a la conexi6n a tierra pot accidente. 1. Levante la base del asiento a la posici6n levantada y abra la puerta de caja de bateria. 2. Desconecte el cable de la bateria NEGRO primero y luego el cable de la bateria ROJO y remueva la bateria del tractor. 3. Instale la nueva bateria con los terminos en misma posici6n como la bateria vieja. 4. Primero, conecte el cable de la bateria ROJO con el terminal positivo (+) con el perno hexagonal y la tuerca segOn se muestra. Aprietelos en forma segura. 5. Conecte el cable de conexi6n a tierra NEGRO a! terminal negativo (-) con el perno hexagonal y la tuerca que queden. Aprietelos en forma segura. 6. Cierre la puerta de la bateria PARA REMOVER EL CONJUNTO DEL CAPO Y DEL ENREJADO 1. Levante el cap6. 2. Desabroche el conector del alambre de las luces delanteras. 3. P&rese delante del tractor. Agarre el cap6 en los lados, inclinelo un poco hacia el motor y s&quelo del tractor. 4. Para volver a instalar el cap6, asegQrese de volver a conectar el conector del alambre de las luces. Puerta de la Oaja de la Bateria Conector del alambre de las Luces Detanteras Base Det Asiento Tuerca Perno Hexagonal MOTOR PARA AJUSTAR EL CABLE DE LA ACELERAClON (positivo) Cable Rojo DE CONTROL El control de la aceleraci6n ha sido preajustado en la f&brica y no deberia necesitar ajustes. Revise los ajustes que se describen a continuaci6n, antes de soltar el cable. Si el ajuste es necesario, vea de manual de motor. PARA AJUSTAR EL CONTROL DE ESTRANGULACION (negativo) Cable Negro PARA CAMBIAR LA BOMBILLA DE LA LUZ DELANTERA 1. Levante el cap6. 2. Tire el sujetador de la bombilla fuera del agujero en la parte trasera del enrejado. 3. Cambie la bombilla en el sujetador y empuje el sujetador de la bombilla, en forma segura, hacia atr&s en el agujero en la parte trasera del enrejado. 4. Cierre el cap6. El control de la estrangulaci6n ha sido preajustado en la f&brica y no deberia necesitar ajustes. PARA AJUSTAR EL CARBURADOR El carburador ha sido preajustado en la f&brica y no deberia necesitar ajustes. Sin embargo, se pueden necesitar ajustes de menor importancia para compensar por las diferencias en el combustible, temperatura, altura o carga. Si el carburador necesita ajustes, vea de manual de motor. 56 Inmediatamente prepare su tractor para el almacenamiento al final de la temporada o si el tractor no se va a usar por 30 dias o m&s. _IADVERTENCIA: Nunca almacene el tractor con gasolina en el estanque dentro de un edifJcio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que el motor se enfrie antes de almacenarlo en cualquier recinto privado. TRACTOR Cuando el tractor se va a almacenar por cierto periodo de tiempo, limpiela cuidadosamente, quite toda la mugre, la grasa, las hojas, etc. Guardela en una area limpia y seca. 1. Limpie todo el tractor (vea "LIMPIEZA' en la secci6n de Mantenimiento en este manual). 2. Inspeccione y cambie las correas, si es necesario (vea las instrucciones para el cambio de las correas en la secci6n de Servicio y Ajustes de este manual). 3. Lubriquelo, seg0n se muestra en la secci6n de Mantenimiento de este manual. 4. Aseg0rese que todas las tuercas, los pernos y los tornillos esten sujetados en forma segura. Inspeccione las partes movibles para verificar si hay daho, rotura o desgaste. Cambielas si es necesario. 5. Retoque todas superficies pintadas oxidadas o picadas; aplique lija antes de pintar. gasolina acidica puede dahar el sistema de combustible de un motor durante el periodo de almacenamiento. • Vaciar el dep6sito del carburante poniendo en marcha el motor y dejandolo funcionar hasta que el carburante termine el carburador este vacio. • Nunca use los productos para limpieza del carburador o del motor en el estanque de combustible pues se pueden producir dahos permanentes. • Use combustible nuevo la pr6xima temporada. AVISO: El estabilizador de combustible es una alternativa aceptable para reducir a un minimo la formaci6n de dep6sitos de goma en el combustible durante el periodo de almacenamiento. Agregue estabilizador a la gasolina en el estanque de combustible o en el envase para el almacenamiento. Siempre siga la proporci6n de mezcla que se encuentra en el envase del estabilizador. Haga funcionar el motor pot Io menos 10 minutos despues de agregar el estabilizador, para permitir que este Ilegue al carburador. No vaciar la gasolina del estanque de gasolina y el carburador si se esta usando estabilizador de combustible. ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y c&mbielo con aceite de motor limpio. (Vea "MOTOR" en la secci6n de Mantenimiento" de este manual.) ClUNDRO(S) 1. Remueva la(s) bujia(s). 2. Vacie una onza de aceite a traves del agujero(s) de la bujia en el cilindro(s). 3. Gire la Ilave de ignici6n a la posici6n de '_,rranque" (Start), pot unos cuantos segundos para distribuir el aceite. 4. Cambie por bujia(s) nueva(s). BATERIA • Cargue la bateria completamente antes de guardarla. • Despues de cierto periodo de tiempo en almacenamiento, la bateria puede necesitar volver a cargarse. • Para ayudar a evitar la corrosi6n y las fugas de potencia durante largos periodos de almacenamiento, se deben desconectar los cables de la bateria y se debe limpiar cuidadosamente (vea "PARA LIMPIAR LA BATERiA Y LOS TERMINALES" en la sec- OTROS • No guarde la gasolina de una temporada a la otra. • Cambie el envase de la gasolina si se empieza a oxidar. La oxidaci6n y/o la mugre en su gasolina producir&n problemas. • Si es posible, guarde su unidad en un recinto cerrado y cObrala para protegerla contra el polvo y la mugre. • Cubra su unidad con un forro protector adecuado que no retenga la humedad. No use pl&stico. El pl&stico no puede respirar, Io que permite la formaci6n de condensaci6n, Io que producir& la oxidaci6n de su unidad. IMPORTANTE: Nunca cubra el tractor mientras e! motor y las areas de escape todavia estan calientes. ci6n de Mantenimientode este manual). • Despues de limpiarla, deje los cables desconectados y p6ngalos en donde no puedan entrar en contacto con los terminales de la bateria. • Si se remueve la bateria del tractor para el almacenamiento, no la guarde directamente sobre concreto o sobre superficies hOmedas. MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos de goma en partes fundamentales del sistema de combus-tible tales como el carburador, el filtro del combustible, la manguera del combustibles mezclados con alcohol (conocido como gasohol o que tienen etanol o metanol) pueden atraer humedad, Io que conduce a la separaci6n y a la formaci6n de acudos durante elalmacenamiento. La 57 IDENTIFICACiON Vea la secci6n Sears. DE PROBLEMAS: apropiada PROBLEMA NO arral3ca en el manual a menos que este dirigido CAUSA 3. Motor ahogado. Bujia mala. Bateria baja o descargada Filtro de aire sucio. Filtro de combustible sucio. Agua en el combustible. 9. Alambrado suelto o dahado. 10.Carburador desajustado. 11 .V&lvulas del motor desajustadas. Dificil de arrancar . 2. 3. 4. 5. Filtro de aire sucio. Bujia mala. Bateria baja o descargada. Filtro de combustible sucio. Combustible rancio o sucio. , Alambrado suelto o dahado. 7. Carburador desajustado. . El motor no da vuelta V_.lvulas del motor desajustadas. . Pedal del freno no presionado. 2. El embrague del accesorio est& enganchado. . Bateria baja o descargada. 4. Fusible quemado. 5. Terminales de la bateria corroidos. 6. Alambrado suelto o daSado. 7. Interruptor de la ignici6n fallado. . . de servieio CORRECCl6N 1. Sin combustible. 2. Motor sin la "ESTRANGU LACION" (CHOKE) adecuada. 4. 5. 6. 7. 8. a un eentro Solenoide o arrancador fallados. Interruptor(es) que exige(n) la presencia del operador fallado. 1. Llene e! estanque de combustible. 2. Yea "PARA ARRANCAR EL MOTOR" en la secci6n de operaci6n. 3. Espere varios minutos antes de tratar de arrancar. 4. Cambie la bujia. 5. Vuelva a cargar o cambie la bateria. 6. Limpie/cambie el filtro de aire. 7. Cambie el filtro de combustible. 8. Vaciar el estanque de combustible y el carburador, vuelva a Ilenar el estanque con gasolina nueva cambie cambie el filtro de combustible. 9. Revise todo el alambrado. 10.Vea "Para ajustar el Carburador" en la secci6n de Servicio y Ajustes. 11 .Pongase en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. 1. 2. 3. 4. 5. Limpie/cambie el filtro de aire. Cambie la bujia. Vuelva a cargar o cambie la bateria. Cambie el filtro de combustible. Vaciar el estanque de combustible y vuelva a Ilenarlo con gasolina nueva. 6. Revise todo el alambrado. 7. Vea "Para ajustar el Carburador" en la secci6n de Servicio y Ajustes. 8. Pongase en contacto con un centro de servicio Sears o con un otro centro de servicio cualificado. 1. Presione el pedal del freno. 2. Desenganche el embrague del accesorio. 3. Vuelva a cargar o cambie la bateria. 4. Cambie el fusible. 5. Limpie los terminales de la bateria. 6. Revise todo el alambrado. 7. Revise/cambie el interruptor de la ignlcton. 8. Revise/cambie el solenoide o arrancador. 9. P6ngase en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. El motor suena pero noarranca . Bateria baja o descargada 2. Terminales de la bateria corroidos 3. Interruptor de la ignici6n 4. Solenoide o arrancador fallados. Perdida de fuerza . Corta mucho cesped, muy r_.pido. 1. Eleve la altura de corte. 2. Aceleraci6n en la posici6n de 2. Ajuste el control de la aceleraci6n. "ESTRANGULACION" (CHOKE). 58 1. 2. 3. 4. Vuelva a cargar o cambie la bateria. Limpie los terminales de la bateria. Revise todo el alambrado. Revise/cambie el solenoide o arrancador. IDENTIFICACION Vea la secci6n Sears. DE PROBLEMAS: apropiada CAUSA PROBLEMA Perdida de fuerza (continuado) en el manual a menos que este dirigido CORRECCION 3. Acumulaci6n de cesped, hojas y basura debajo de la segadora. 4. Filtro de aire sucio. 5. Nivel de aceite bajo/aceite sucio. 6. Bujia fallada. 7. Filtro de combustible sucio. 8. Combustible rancio o sucio. 9. Agua en el combustible. 10.Alambrado de la bujia suelto. 11 .Rejilla/aletas de aire del motor sucias. 12.Silenciador sucio/taponado. 13.Alambrado suelto o dahado. 14.Carburador desajustado. 15.V&lvulas del motor desajustadas. Vibraci6n excesiva 1. Cuchilla desgastada, doblada o suelta. 2. Mandril de la cuchilla doblado. 3. Parte(s) suelta(s)/dahada(s). El tractor se port en marcha atr_s 1. El sistema de funcionamiento atr&s (ROS) no est& "ON". El motor continua funcionan do euando el operador se baja del asiento con el embra-gue del accesorio enganehado 1. Sistema de control que exige la presencia del operador seguridad fallado. Ma eorte=disparejo 1. Cuchilla desgastada, suelta. doblada o 2. El conjunto segador no est& nivelado. 3. Acumulaci6n de cesped, hojas y basura debajo de la segadora. 4. Mandril de la cuchilla doblado. . a un centro de servicio Los agujeros de ventilaci6n del con junto segador taponados debido a la acumulaci6n de cesped, hojas y basura alrededor de los mandriles. 59 3. Limpie la parte inferior de la caja de la segadora. 4. Limpie/cambie el filtro de aire. 5. Revise el nivel de aceite/cambie el aceite. 6. Limpie y vuelva a ajustar la abertura o cambie la bujia. 7. Cambie el filtro de combustible. 8. Vaciar el estanque de combustible y vuelva a Ilenarlo con gasolina nueva. 9. Vaciar el estanque de combustible y el carburador, vuelva a Ilenar el estanque con gasolina nueva y cambie el filtro de combustible. 10.Conecte y apriete el alambre de la bujia. 11 .Limpie las rejilla/aletas de aire del motor. 12.Limpie/cambie el silenciador. 13.Revise todo el alambrado. 14.Vea "Para ajustar el Carburador" en la secci6n de Servicio y Ajustes. 15.Pongase en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. 1. Cambie la cuchilla. Apriete el perno de la cuchilla. 2. Pongase en contacto con uncentro de servicio Sears o con un otto centro de servicio cualificado. 3. Apriete la(s) parte(s). Cambie las partes dahadas. . . Girar el ROSen la posici6n "ON". Yea la secci6n de operaci6n. Revise el alambrado, los interruptores y la conexiones. Si no est&n correctas, pongase en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. Cambie la cuchilla. Apriete el perno de la cuchilla. 2. Nivele el conjunto segador. . 3. Limpie la parte inferior de la caja de la segadora. 4. Pongase en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. . Limpie alrededor de los mandriles para abrir los de ventilaci6n. IDENTIFICACION Yea la secci6n DE PROBLEMAS: apropiada en el manual a menos que este dirigido a un centro de servicio Sears, PROBLEMA CAUSA Las cuchillas segadoras no rotan Mala descarga c_sped del CORRECCION 1. Obstrucci6n en el mecanismo del embrague. 2. La correa de impulsi6n de la segadora est,. desgastada/dafiada. 3. Polea de guia atascada 4. Mandril de la cuchilla atascado. 1. Velocidad del motor muy lenta. 2. Velocidad de recorrido demasiado rapida. 3. Cesped mojado. 4. El conjunto segador no est,. nivelado. 5. Presi6n de aire de las Ilantas baja o dispareja. 6. Cuchilla desgastada, doblada o suelta. 7. Acumulaci6n de cesped, hojas y basura debajo de la segadora. 8. La correa de impulsi6n de la segadora ester desgastada o desajustada. 9. Las cuchillas est_.n mal con instaladas. 10.Cuchillas inadecuadas en uso. 11 .Los agujeros de ventilaci6n del conjunto agujeros segador taponados debido a la acumulaci6n de cesped, hojas y basura alrededor de los mandriles. Las luz (ces) delantera(s) no est.(n) funcionando (si equipadas) La bateria no carga 1. El interruptor est,. 'APAGADO" (OFF). 2. Bombilla(s) o I_.mpara(s) quemadas. 3. Interruptor de la luz fallado. 1. Remueva la obstrucci6n. 2. Cambie la correa de impulsi6n de la segadora. 3. Cambie la polea de guia. 4. Pongase en contacto con un centro de servicio Sears o con un otto centro de servicio cualificado. 1. Ponga el control de la aceleraci6n en la posici6n de "RAPIDO" (fast). 2. Cambie a una velocidad mas lenta. 3. Permita que se seque el cesped antes de segar. 4. Nivele el conjunto segador. 5. Revise las Ilantas para verificar que tienen la presi6n de aire adecuada. 6. Cambie/afile la cuchilla. Apriete el perno de la cuchilla. 7. Limpie la parte inferior de la caja de la segadora. 8. Cambie/ajuste la correa de impulsi6n de la segadora. 9. Vuelva a instalar las cuchillas el borde afilado hacia abajo. 10.Cambie pot las cuchillas enumeradas en este manual. 11 .Limpie alrededor de los mandriles para abrir los de ventilaci6n. 1. "ENCIENDA' (ON) el interruptor. 2. Cambie la bombilla(s) o I_.mpara(s). 4. Alambrado suelto o daflado. 5. Fusible quemado. 3. Revise/cambie el interruptor de la luz. 4. Revise el alambrado y las conexiones. 5. Cambie el fusible. 1. 2. 3. 4. 1. 2. 3. 4. Elemento(s) de la bateria malo(s). Malas conexiones de conexiones. Regulador fallado (si equipado). Alternador fallado. Perdida de impulsi6n 1. El control de rueda libre esta en la posici6n "desenganchado" (disengaged). 2. La correa de impulsi6n de impulsi6n de movimiento. 3. Aire atrapado en la transporte o el servicio. El motor tiene "contraexp= Iosiones"cuando se "APAGA" 1. El control de la aceleraci6n del motor no fue ajustado en la posici6n de velocidad media y maxima (r_.pida) antes de parar el motor. 60 Cambie la bateria. Revise/limpie todas las cables. Cambie el regulador. Cambie el alternador. 1. Ponga el control de rueda libre en la posici6n "enganchado" (disengaged). 2. Reemplace la correa de movimiento esta gastada, daflada o rota. 3. Purgue la transmisi6n. , Mueva el control de la aceleraci6n a la posici6n de velocidad media y maxima (r_.pida) antes de parar el motor. 61 62 z / / r.r / / k- o_ u / / / z 0 o / / z_ ww 0 a_ zz _o o/_ W n a / / / 63 NEED MORE oFindthis_d _tLyourother product m_nu_ts ontine. °Get_oswers fromo_rte_mofhomee×perts. ° Get a persona[izedmaintenanceplan for your home. o Findinformation and tools to help with homeprojects. maHage_heme _: Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-1VW-HOME ® (1-800-469-4663) www.sears.com Anytime, day or night (U.S.A. and Canada) www.sears.ca Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, day or night (U.S.A. only) www.seats.com To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada) Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: 1-888-SU -HOGAR ® Au Canada pour service en frangais: 1-800-LE-FOYER Mc (1-800-533-6937) (1-888-784-6427) www.sea rs.ca © Sears Brands, LLC ® Registered Trademark / TMTrademark / SM Service Mark of Sears Brands, ® Marca Registrada / TM Marca de Fabrica / SMMarca de Servicio de Sears MC Marque de commerce / MD Marque depos6e de Sears Brands, LLC 12.09.09 TH LLC Brands, LLC Printed in the U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 64 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Tue Jan 19 04:17:23 2010 Author : Title : Subject :EXIF Metadata provided by EXIF.tools