CSAE ADMITTO-ADVANT ADMITTO-A-1200-D_advant User Manual Testreport ETS 300 335
CSAE GmbH ADMITTO-A-1200-D_advant Testreport ETS 300 335
CSAE >
Users Manual
Test report no. 18011501 Page 1 of 1
EUT: ADMITTO-A-1200-
D_advant
FCC ID: 2APRKADMITTO-
ADVANT
FCC Title 47 CFR Part 15
Date of issue: 2018-09-18
Date: 2018-06-06
Created: P4 Reviewed: P9 Released: P1
Vers. No. 1.18
TÜV NORD Hochfrequenztechnik GmbH & Co. KG
Rottland 5a, 51429 Bergisch Gladbach, Germany
Tel: +49 2207 9689-0
Fax +49 2207 9689-20
Annex acc. to FCC Title 47 CFR Part 15
relating to
CSAE GmbH
ADMITTO-A-1200-D_advant
Annex no. 5
User Manual
Functional Description
Title 47 - Telecommunication
Part 15 - Radio Frequency Devices
Subpart C – Intentional Radiators
ANSI C63.4-2014
ANSI C63.10-2013
OEM RFID-Module ADMITTO USB
21.01.2014 ADMITTO-A-XXXX-D_Basisdokument_USB_en.docx
Rev 1.00
ADMITTO USB
Interface: USB
Versions:
Standard
RFID Technologie
Special Feature
ADMITTO-A-1200-D
LEGIC
®
prime / advant
Basis LEGIC
®
SM 4200M
Multi-ISO-Platform
LEGIC
prime/advant
MIFARE Classic
DESFire / EV1
ISO14443 A+B
ISO15693
ADMITTO-A-1400-D
LEGIC
®
prime / advant
basis LEGIC
®
SM 4500M
Information:
Support the initialization of
LEGIC transponder medias
ADMITTO-A-2000-D
125 kHz
ADMITTO-A-3100-D
MIFARE Classic / DESFire / EV1
(basis NXP)
Designs:
Table design
Mounting design
OEM RFID-Module ADMITTO USB
21.01.2014 ADMITTO-A-XXXX-D_Basisdokument_USB_en.docx
Rev 1.00
General Data
Applications
• Universally applicable for reading and
writing of RFID transponder media
e.g. for
- Data collection
- Cashless payment
- PC-access
- Writing of biometric data
(fingerprint template)
- General read- / write applications
Special features
• Shapely and compact plastic casing with
bottom or mounting plate of stainless steel
• Directly applicable to metal substrate
Technical data
• Power supply
4,5 - 5,5 V/DC (direkt from USB)
• Power consumption
ADMITTO-A-1200 typ. 260 mA
max. 400 mA
ADMITTO-A-1400 typ. 260 mA
max. 400 mA
ADMITTO-A-2000 typ. 200 mA
max. 280 mA
ADMITTO-A-3100 typ. 220 mA
max. 350 mA
• Temperature range:
- storage temperature -30°C to +70°C
- operating temperature -25°C to +60°C
• Standard colour RAL 7015
Protection class
• table design IP 40
• mounting design IP 54
Dimensions
• Table design
112 x 54 x 27 mm (LxWxD)
• Mounting design
112 x 54 x 45 mm (LxWxD)
Interface
• Table design
USB / Version 2.0
• Mounting design
USB / Version 2.0
Signal elements
• 3 LEDs green, yellow, red
USB- connection cable
(type of connection / length / colour)
• Table design
- USB male connector: Type A
- Cable length: approx. 2 m
- Colour: black
• Mounting design
- USB male connector: Type A
- Cable length: approx. 15 cm
- Colour: black
Function mode
• Composite Device
CDC (Communication Device Class)
or
HID (Human Interface Device)
Configurable with PC-Tool
Firmware / Software protocol
• “active sending” / can be parameterized
• phg_crypt
• transparent LEGIC instruction set
(only for LEGIC licensee)
• phg 1685
• LEGIC RW_01
• LEGIC RW_01_advant
• additional on request
The support and availability of the
different software protocols depends on
the current RFID-technology and
available RFID reader hardware.
Detailed information on request
OEM RFID-Module ADMITTO USB
21.01.2014 ADMITTO-A-XXXX-D_Basisdokument_USB_en.docx
Rev 1.00
Supported transponder medias
The support of the transponder media listed be l o w is generally dependent on the respective
variant reader technology (hardware platform) and on the respective reader firmware.
The listing of the transponder media is without guarantee of completeness.
Further information can be received on request.
Reader technology
Transponder medias
LEGIC
ADMITTO-A-1200
ADMITTO-A-1400
Mifare
ADMITTO-A-3100
125 kHz
ADMITTO-A-1200
LEGIC MIM 22 / MIM 256 / MIM 1024
X
LEGIC ATC512-MP110 (ISO 14443A)
X
X (CSN/UID)
LEGIC ATC2048-MP110 (ISO 14443A)
X
X (CSN/UID)
LEGIC ATC4096-MP310 (ISO 14443A)
X
X (CSN/UID)
LEGIC ATC4096-MP311 (ISO 14443A)
X
X (CSN/UID)
LEGIC AFS4096-JP10/JP11 (ISO 14443A)
X
X (CSN/UID)
LEGIC ATC128-MV210 (ISO 15693)
X
LEGIC ATC256-MV210 (ISO 15693)
X
LEGIC ATC1024-MV110 (ISO 15693)
X
ISO 14443A-Transponder(UID/CSN)
X
X
ISO 15693-Transponder(UID/CSN)
X
SONY FeliCa subset
X
INSIDE Secure (UID/CSN)
X
Classic 1k / 4k
X
X
DESFire 4k
X
X
DESFire EV1, 2k / 4k / 8k
X
X
Transparent, ISO14443A
X
Transparent, ISO14443A Layer 3
X
Transparent, ISO14443A/B Layer 4 subset
X
Transparent, ISO15693 Layer 3
X
Transparent, NFC Forum Type 2 Tag
X
Transparent, NFC Forum Type 3 Tag
X
hitag 1
X
hitag 2
X
hitag S
X
µem 4102 (read only)
X
µem V4150
X
Attention:
Recommendation at use of smart card chips for LEGIC “card in card“Solutions
A aptitude examination of the corresponding medium should be carried out before use or
intended use.
Detailed information about the procedure are available on request.
OEM RFID-Module ADMITTO USB
21.01.2014 ADMITTO-A-XXXX-D_Basisdokument_USB_en.docx
Rev 1.00
Mounting design
Measures
Mounting example
Touch-panel PC Dimensions oft the installation mounting angle
(recommendation)
EG Conformity
The device complies with the essential legal requirements, if used for its intended use.
The EG-Declaration of Conformity can be received on request.
Care and cleaning instruction
The use of hard or sharp objects (rings, fingernails etc.) can cause scratches and damage the device.
Wipe the device with a soft lint-free cloth, or one that has been lightly dampened with water.
The use of caustic liquids such as benzene, thinners, alcohol, solvents, or any kind of abrasive cleaners
will lead to surface deterioration and damage.
OEM RFID-Module ADMITTO USB
Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer could void the user’s authority
to operate the equipment.