CTECH SCIENCE and TECHNOLOGY DEVELOPMENT S1 BT Keyboard Case User Manual

SHENZHEN CTECH SCIENCE & TECHNOLOGY DEVELOPMENT CO., LTD. BT Slide Keyboard Case Users Manual

Users Manual

BT KEYBOARD CASE FOR IPHONE USER’S MANUAL
Step I Place Your Iphone into the case Step II Pair (Connect) Your Iphone with the Keyboard Note: This step is only needed when you first use this keyboard case Turn on your Iphone and tap “setting”
Tap “General” And find the “Bluetooth” option
Slide the Bluetooth button to “On” and your Iphone will start to search Bluetooth de v i c e s You should turn the switch in the keyboard to “on” position
And active the Bluetooth button with a little stick Then the Bluetooth signal light on the left top of the keyboard will be on
Now, your Iphone will find this Bluetooth keyboard Then you should tap “ Bluetooth Keyboard” option, then a blue window with a password will come out
Enter the password on the Bluetooth keyboard then press the “Enter” key, then your Iphone is successfully paired(connected) with the Bluetooth keyboard Step III Start to use the keyboard
You can write message, notes and email with this keyboard instead of the touching keyboard on your Iphone However, you can press “fn” + “the key with keyboard symbol” at the same time to get the touching keyboard back.
z Press the “Shift” key at the same if you want to type the white symbols on the left top of some keys z Press the “fn” key at the same time if you want to type the blue symbols on the left top of some other keys Technical Specification Of The Product: Bluetooth Specification： Version 2.0 Operation Current： 3mA Standby Current: 0.2mA Operation Voltage： 3.7V
Charging Voltage: 110-240V Battery Type: 500mAh Lithium Battery Charging period： 4hours （For the first time, please charge for 12 hours） Duration of Charged battery: 45 days: Note: USB PORT ONLY FOR CHARGE Trouble Shooting： If you are unable to connect the keyboard to your Iphone, please try the following: z Check if the battery is low. When the battery is low, some keys will react slowly and even don’t work. Then, you should charge the battery. z Check the power switch, make sure it is on. When it is on, the power light on the left top of the keyboard will flash for two seconds z Restart the Bluetooth switch, make sure your Iphone can search this device z Ensure the password for pairing is correct. Caution: z The case is made of plastic, please avoid any corrosion and leave it away from fire ! z Please operate according to the instruction in the user’s manual, we would not be responsible for any damage caused by inappropriate operation!
FCC ID: YVP-S1 IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipments.
Federal Communications Commission (FCC) Statement Radio Frequency Interference (RFI) (FCC 15.105) This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications (FCC 15.21) Changes or modifications to this equipment not expressly approved by Digi may void the user’s authority to operate this equipment.

Navigation menu