CTECH SCIENCE and TECHNOLOGY X323 Bluetooth Keyboard User Manual

SHENZHEN CTECH SCIENCE & TECHNOLOGY CO. LTD Bluetooth Keyboard Users Manual

Users Manual

User’ ManualUSER’SMANUAL OF THEBLUETOOTH KEYBOARD CASEModel:X323FCC ID:PD8X323
BT Keyboard Case2Operation Instruction of the Ipad Keyboard Case:Step I Place your Ipad into the caseSlide your iPad into the caseClose the Velcro Strap to prevent the iPad from slipping outPlace the case to a comfortable position
BT Keyboard Case3Step II Turn the keyboard onYou will find the On/Off switch and Bluetooth Button on the right top side of the keyboard*The built-in lithium battery will support 120 hours continuously typing when fullycharged. Please charge the keyboard with the USB cable included.*Turn the power button on and you can start using the keyboard.A: Capital light* When the letters are locked in Capital mode, this white light will be onB: Power light* When the keyboard is battery low, the yellow light will blink.* When the keyboard is being charged, this light will light on in red color.* When the keyboard battery is fully charged, this light will light on in green color.C: Bluetooth light* When the Bluetooth button is activated and during pairing between the keyboard andyour ipad, this light will blink until the keyboard and ipad is successfully paired.On/Off SwitchBluetooth Button
BT Keyboard Case4Step III Pair the keyboard to your IpadPress the Bluetooth key to send the Bluetooth signal.Turn your iPad on and tap “Settings”---“General”---“Bluetooth”Slide the Bluetooth to “On” and your iPad will start to search for Bluetooth devicesWhen it finds the “Bluetooth keyboard”, tap it and begin pairing.Enter the password showed on the blue window and press the “Enter” key on the keyboardStep III is only needed for the initial setup. After your first successful connection, thekeyboard will connect automatically to your Ipad when you turn the power on. Youmay need to tap on the keys to wake it up from hibernate mode.
BT Keyboard Case5About the Keyboard
BT Keyboard Case6Technical Specification Of The Product:Bluetooth Specification：Version 3.0Operation Current：<1.5mAStandby Current: <0.5mAOperation Voltage：3.7VCharging Voltage: DC 5VBattery Type: Lithium BatteryCharging period：2hours (For the first time, please charge for 12 hours)Trouble Shooting：If you are unable to connect the keyboard to your Ipad, please try the following:Check if the battery is low. When the battery is low, some keys will react slowly andeven won’t work. Then, you should charge the battery.Check the power switch, make sure it is on. When it is on, the power light on the righttop of the keyboard will flash for two secondsRestart the Bluetooth switch, make sure your Ipad can find this deviceEnsure the password for pairing is correct.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu