CTECH SCIENCE and TECHNOLOGY X7004 Bluetooth Keyboard User Manual Bluetooth Keyboard
SHENZHEN CTECH SCIENCE & TECHNOLOGY CO. LTD Bluetooth Keyboard Bluetooth Keyboard
user manual
Bluetooth Keyboard
Model Name:X7004
FCC ID: PD8X7004
BT Keyboard Case
2
User’ Manual
USER’S MANUAL OF THE
BLUETOOTH KEYBOARD
BT Keyboard Case
3
Welcome
Congratulations on selecting the Ultra-Flat Bluetooth Keyboard, it’s super slim size with
78 keys. Advanced patent on less noise and adopt latex spring circle and scissor structure,
This creative and easy-to-use Bluetooth Keyboard will bring you the novel feeling of
wireless transmitting.
Overview
BT Keyboard Case
4
Pair the keyboard to your Tablet
Press the Bluetooth key to send the Bluetooth signal.
Turn your tablet on and tap “Settings”---“General”---“Bluetooth”
Slide the Bluetooth to “On” and your tablet will start to search for Bluetooth devices
When it finds the “Bluetooth keyboard”, tap it and begin pairing.
Enter the password showed on the blue window and press the “Enter” key on the keyboard
This step is only needed for the initial setup. After your first successful connection,
the keyboard will connect automatically to your tablet when you turn the power on.
You may need to tap on the keys to wake it up from hibernate mode.
BT Keyboard Case
5
Technical Specification Of The Product:
Bluetooth Specification：Version 3.0
Range of Frequency: 2.4GHZ
Operation Current： <5.0mA
Standby Current: 2.5 mA
Operation Voltage： 3.0-5.0V
Battery Type: 2 AAA batteries
Trouble Shooting：
If you are unable to connect the keyboard to your tablet, please try the following:
Check if the battery is low. When the battery is low, some keys will react slowly and
even won’t work. Then, you should change the battery.
Restart the Bluetooth switch, make sure your tablet can find this device
Ensure the password for pairing is correct.
Important Regulatory Information
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.