CUB ELECPARTS BLESENSOR2 BLE Sensor 2 User Manual NS HURSK18 17 0287 MAN V1 ENG

CUB ELECPARTS INC BLE Sensor 2 NS HURSK18 17 0287 MAN V1 ENG

Manual

Before using your new product, please read these instructions to prevent any damage.USER GUIDEUniversal Rear Speaker KitNS-HURSK18FPONS-HURSK18_17-0287_MAN_V1_ENG.fm Page 1 Monday, May 22, 2017 8:46 AMv1R2
www.insigniaproducts.com2ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Using the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Programming a universal remote . . . . . . . . . . . . . . . . . . . . . . . . . . .10Setting up your speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Step 1 - Choosing your connection . . . . . . . . . . . . . . . . . . . . . . . . .11Step 2 - Connecting the transmitter . . . . . . . . . . . . . . . . . . . . . . . .11Step 3 - Connecting the speakers to the receiver . . . . . . . . . . . .12Step 4 - Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . .13Step 5 - Connecting the receiver to the transmitter. . . . . . . . . .14Positioning the speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Using your speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Maintaining your speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Replacing the remote control battery. . . . . . . . . . . . . . . . . . . . . . .17Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Legal notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19ONE-YEAR LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21IntroductionCongratulations on your purchase of an Insignia Universal Rear Speaker Kit. It features a variety of connections and a remote control for easy operation.This user guide explains how to correctly install, operate, and get the best performance from your speaker kit. Read this user guide carefully before installing your system, and then keep it handy for quick reference.Important safety instructions1Read these instructions.2Keep these instructions.3Heed all warnings.4Follow all instructions.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 2 Monday, May 22, 2017 8:46 AM
3Universal Rear Speaker Kitwww.insigniaproducts.com5Do not use this apparatus near water.6Clean only with dry cloth.7Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories specified by the manufacturer.12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13 Unplug this apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it.16 An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect any Class I device to a grounding-type, three-prong outlet.17 DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.18 The wall plug is the disconnecting device. The plug must remain readily operable.19 No naked flame sources, such as lighted candles, should be placed on the apparatus.20 The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 3 Monday, May 22, 2017 8:46 AM
4NS-HURSK18www.insigniaproducts.com21 The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.22 Batteries should not be exposed to excessive heat such as sunshine, fire, or the like.23 Keep new and used batteries away from children.24 If the battery compartment does not close securely, stop using the product and keep it away from children.25 If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.Placement• The speaker cabinets are made out of plastic and are therefore sensitive to extreme temperatures and humidity. Do not put it in locations subject to direct sunlight or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen.• Do not put water or other liquids close to the speakers. If liquid is spilled on top of the speakers, they may be damaged.• The speakers should be placed on a sturdy, flat surface that is free from vibration, or mounted on a wall. Do not put the speakers on an uneven or unstable surface, where they may fall and cause damage.Using close to a TV or computerSome older TVs and computer monitors are magnetically sensitive devices. They are likely to suffer discoloration or picture distortion when conventional speakers are placed nearby. If discoloration problems persist, try moving the speakers away from your TV or monitor. WarningDanger of explosion if the remote control battery is incorrectly replaced. Replace only with the same or equivalent type. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 4 Monday, May 22, 2017 8:46 AM
5Universal Rear Speaker Kitwww.insigniaproducts.comPackage contentsSpeakersRemote Control with CR2025 battery3.5 mm Audio CableQuick Setup GuideTransmitterReceiverOptical CableAC Adapter5V 1AAC Adapter12V 1.5ASpeaker wires3.5 mm to RCA adapterThe 3.5 mm to RCA adapter is not mentioned in the manual. Is this provided and when is it used?NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 5 Monday, May 22, 2017 8:46 AM
6NS-HURSK18www.insigniaproducts.comFeaturesSpeakers# ITEM DESCRIPTION1 Speaker Produces sound.2 Hanging hole Used to hang your speaker on a wall.3 Speaker jacks Connect speaker wires from the receiver (red wires to red jacks and black wires to black jacks) to the speakers here.Back viewNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 6 Monday, May 22, 2017 8:46 AM
7Universal Rear Speaker Kitwww.insigniaproducts.comTransmitter# ITEM DESCRIPTION1 Optical indicator LED Lights when using an optical (TV or DVD) sound source (default).2 AUX indicator LED Lights when using an AUX (tablet or mobile device) sound source.3 (power) button Press to turn on the transmitter. Press again to put the transmitter into standby mode.4 (source) button Press to toggle between the optical and aux sound sources.5- (volume down) Press to lower the volume.6+ (volume up) Press to raise the volume.7 Dolby indicator LED Lights when the audio has Dolby 5.1 content.8 PCM indicator LED Lights when the PCM audio is being received. 9 IR sensor Aim the remote control at this sensor to control the transmitter.10 Power indicator - Lights red when the transmitter is in standby mode.- Blinks red when the transmitter is muted.- Turns off when the transmitter is turned on.11 DC IN jack Connect the 5V 1A AC adapter to this jack to power the transmitter.12 Pairing button Press and hold to pair the transmitter to the receiver.13 Factory only DO NOT USE. This jack is for factory use only.14 Optical out jack Connect your sound bar to this jack with a digital optical cable (included).15 Optical in jack Connect your TV or DVD player to this jack with a digital optical cable (included).16 AUX out jack Connect your sound bar to this jack with a 3.5 mm cable (included).17 AUX in jack Connect your TV or DVD player to this jack with a 3.5 mm cable (included).Back viewNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 7 Monday, May 22, 2017 8:46 AM
8NS-HURSK18www.insigniaproducts.comReceiver# ITEM DESCRIPTION1 Power indicator - Lights blue when the receiver is on and paired with the transmitter.- Blinks blue when the receiver is in pairing mode.- Turns off when the receiver is turned off.2DC IN jack Connect the 12V 1.5A AC adapter to this jack to power the receiver.3Pairing button Press and hold to pair the receiver to the transmitter.4 Speaker jacks Connect speaker wires from these jacks (red wires to red jacks and black wires to black jacks) to the speakers.Back viewNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 8 Monday, May 22, 2017 8:46 AM
9Universal Rear Speaker Kitwww.insigniaproducts.comRemote control#BUTTON DESCRIPTION1 (Power) Press to turn on the speakers. Press again to put the speakers into standby mode.2SOURCE Press to select the OPTICAL or AUX sound source.3SURROUND Press + to increase the surround effect or - to decrease the surround effect. 4DELAY Press + to increase the sound delay or - to decrease the sound delay. (Please explain)5 (Mute) Press to mute the sound from the speakers. Press again to restore the sound.6SOUND MODE Press to select the SURROUND or STEREO sound mode.7MASTER VOL +/– buttons Press to increase or decrease the volume of the speakers.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 9 Monday, May 22, 2017 8:46 AM
10NS-HURSK18www.insigniaproducts.comUsing the remote control1Remove the plastic tab from the battery compartment before using the remote control for the first time.2Point the remote control directly at the IR sensor on the front of the transmitter. You must be within approximately 23 ft. (7 m) of the transmitter.Programming a universal remoteIf you program your universal remote to an Insignia TV, it will control your speakers’ volume. To program your remote:1Go to www.insigniaproducts.com/remotecodes.2Find your remote's brand from the list of remote codes.Cautions• Do not spill water or any liquid on the remote control.• Do not place the remote control on a wet surface.• Do not place the remote control in direct sunlight or near sources of excessive heat.• If the remote control is not going to be used for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion.NoteTo control your speakers' volume you can use an Insignia TV remote or program a universal remote. Insignia TV remotes and universal remotes will not be able to change your speakers’ audio source or DSP sound mode. Use the controls on your speakers or the remote that came with it to change these settings.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 10 Monday, May 22, 2017 8:46 AM
11Universal Rear Speaker Kitwww.insigniaproducts.com3Follow the directions that came with your remote to program a remote code. If several remote codes are provided, you may need to try several until you find one that works.Setting up your speakersStep 1 - Choosing your connection• Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, cable box, tablet, or mobile device to identify your audio OUT ports. Choose the connection option below that fits your audio source. You can connect several devices and switch the sound source as required.Step 2 - Connecting the transmitterDigital Optical connection (best)1Connect one end of the digital optical cable (included) to the transmitter. 2Connect the other end into the Digital Optical Output port on your audio source device.3Change the device’s audio output to RAW format (typically found in audio settings). Refer to the documentation that came with your audio source device for more information.NoteMake sure that you program the speakers to a device on your remote that is not in use.CautionTurn off or unplug all devices while you are making connections.AUDIO QUALITY JACK TYPE CABLEBest Good Digital optical cable (included)Audio source (TV, Blu-ray, or cable box)Back of the transmitter Sound barDigital Optical cable (included). See “Digital Optical connection (best)” on page 11.3.5 mm to 3.5 mm cable (included). See “AUX connection (good)” on page 12.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 11 Monday, May 22, 2017 8:46 AM
12NS-HURSK18www.insigniaproducts.comAUX connection (good)1Connect one end of the included 3.5 mm audio cable (included) to the transmitter. 2Connect the other end of the 3.5 mm audio cable into the Audio Output ports on your audio source device, such as a tablet or mobile device.Step 3 - Connecting the speakers to the receiver1Connect one end of the speaker wires (included) to the jacks on the back of the speakers, red wires to red jacks and black wires to black jacks.2Connect the other end of the speaker wires to the SPK-L (left speaker) and SPK-R (right speaker) jacks on the back of the receiver, red wires to red jacks and black wires to black jacks.3.5 mm cable (provided) Audio source (tablet or smartphone)Back of the transmitter Sound barBack of the receiver Left speaker Right speakerNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 12 Monday, May 22, 2017 8:46 AM
13Universal Rear Speaker Kitwww.insigniaproducts.comStep 4 - Connecting the AC adapter1Connect the 5V 1A AC adapter to the DC IN jack on the back of the transmitter.2Connect the 12V 1.5A AC adapter to the DC IN jack on the back of the reveiver.3Plug the other end of the AC adapters into a power outlet or surge protector.Cautions• Make sure that the electrical outlet matches the AC adapter’s input requirements of 100-240 V, 50/60 Hz before connecting.• Use only the AC adapter provided for the device specified.• Plug in the AC adapter only after all other connections have been made.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 13 Monday, May 22, 2017 8:46 AM
14NS-HURSK18www.insigniaproducts.comStep 5 - Connecting the receiver to the transmitterBefore you can use your speakers, you need to pair the transmitter to the receiver.Pairing your devices1Turn on the transmitter and receiver.2Press and hold the Pairing button on the back of the receiver for three seconds. When paired, the LEDs light solid blue.Disconnecting your devices• Turn off the transmitter and receiver.NotePlace the transmitter and receiver within 30 ft. (10 m) of each other.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 14 Monday, May 22, 2017 8:46 AM
15Universal Rear Speaker Kitwww.insigniaproducts.comPositioning the speakersYou can set the speakers on a flat surface or mount them on a wall. To mount them on a wall, install a screw or nail for each speaker at the position you want, then hang the speakers on the screw/nail.WarningImproper installation can result in serious injury or damage to your speakers. If necessary, seek the assistance of a professional.CautionsIf you are installing screws into drywall or concrete, use wall anchors designed for that type of surface.ReceiverTransmitterSound sourceNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 15 Monday, May 22, 2017 8:46 AM
16NS-HURSK18www.insigniaproducts.comUsing your speakersThis system lets you access two different sound sources: Optical or AUX.Listening to your speakers1Press the (Power) button on the transmitter or the remote control to turn on your speaker system. The power indicator on the transmitter turns off.2Turn on the audio source device connected to your speakers and begin playback.3Press the (source) button on the transmitter to select the audio source or press the selected source button on the remote control until you hear sound from your speakers.4Adjust the volume on the transmitter, or with the remote control, or on the audio source device to a comfortable level.5Press the (Power) button again to turn off your speaker system. The power indicator on the transmitter lights red.NoteWhen you use the OPTICAL connection, the audio content should be PCM or Dolby 5.1. Refer to the manual you received with the output device for additional information.WarningContinuous use of high volume sound may permanently damage your hearing.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 16 Monday, May 22, 2017 8:46 AM
17Universal Rear Speaker Kitwww.insigniaproducts.comMaintaining your speakersReplacing the remote control battery1Squeeze the battery tray’s sides together and slide it out of the remote control.2Remove the old battery and insert the new 3V lithium battery (CR2025) into the battery tray. Match the polarity of the new battery with the plus sign (+) in the battery tray.3Slide the battery tray back into the battery compartment until it clicks into place.Cautions• The battery should not be exposed to excessive heat, such as sunshine, heat registers, or fire.• Battery chemicals can cause a rash. If the battery leaks, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.• Make sure that the battery is disposed of correctly. Do not burn or incinerate.Notes• Remove the battery when the charge is depleted.• If the remote control is not going to be used for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 17 Monday, May 22, 2017 8:46 AM
18NS-HURSK18www.insigniaproducts.comTroubleshootingCheck this list for a possible troubleshooting solution before calling for service.PROBLEM POSSIBLE SOLUTIONSThe power does not come on.• Make sure that the AC adapter is securely plugged into the power outlet and the affected transmitter or receiver.The remote control does not work.• Remove any obstacles between the remote control and the IR sensor on the speakers.• The remote control battery may be exhausted, replace it.• Move closer to the speakers. The remote control is only effective to approximately 23 ft. (7 m).There is no sound or very low-level sound is heard from the speakers.• Make sure that you are connected to an audio OUT jack on your sound source. The port will not send audio out if it is an INPUT.• Make sure that the volume level of the speakers is set to an adequate level.•Make sure that the volume level is not muted. Press the (mute) button on the remote control again to restore the sound output.•Make sure that the correct audio source is selected. Press the button on the transmitter or the source button on the remote control to switch to the correct audio source.• Make sure that the power is on and all connections are secure.• Make sure that the volume is turned up on your sound source.• If you are using the OPTICAL connection, make sure that the source device’s audio source is set to “PCM” format. Refer to the documentation your received with the audio source device (such as a TV or DVD/Blu-ray player, etc.) for additional information.• Make sure that the audio cable you are using is not damaged or broken. Try using another one.Your speakers are not working properly.• Unplug the AC adapters from the wall outlet and then try plugging them in again after 30 seconds.• If you are using the OPTICAL connection, make sure that the source device’s audio source is set to “PCM” format. Refer to the documentation your received with the audio source device (such as a TV, DVD/Blu-ray player, etc.) for additional information.• Make sure that the audio cable you are using is not damaged or broken. Try using another one.The sound is breaking up or buzzing.• Make sure that you are connected to an audio OUT jack on your sound source. The port will not send audio out if it is an INPUT.• Make sure that all connections are secure and cables are not broken or damaged.• If you are using the OPTICAL connection, make sure that the source device’s audio source is set to “PCM” format. Refer to the documentation your received with the audio source device (such as a TV or DVD/Blu-ray player, etc.) for additional information.• Connect to a different source device (such as a TV or DVD/Blu-ray player) to see if the buzzing still occurs. If it does not, this may indicate an issue with the original source device.• Use a different connection method (for example, try Optical instead of AUX) between the transmitter and the source device to make sure that the jacks on both devices are still working.• Make sure that the audio cable you are using is not damaged or broken. Try using another one.I can hear sound from both my TV and my speakers.• Turn off or mute the internal speakers of your TV. Refer to the TV’s manual for instructions.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 18 Monday, May 22, 2017 8:46 AM
19Universal Rear Speaker Kitwww.insigniaproducts.comSpecificationsDesigns and specifications are subject to change without notice.Legal noticesFCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.My TV remote does not control my speakers.• If you are using a universal remote control, make sure that it is programmed to your speakers. See Programming a universal remote on page 10.• Universal remotes will only control your speakers’ volume. Use the controls on your speakers or the remote that came with it to change the speakers’ audio source or sound mode.• Make sure that you aim your universal remote at the remote sensor on the front of your speakers.• Make sure that you select the correct source on your universal remote.My s keep unpairing.• Shorten the distance between the s.Power output Left and right channel Frequency response 20Hz-20 KHzDimensions (approx.)(H x W x D)Transmitter Module: 1.04 x 5.04 x 3.6 in. (26.5 x 128 x 91mm)Receiver Module: 1.04 x 5.04 x 3.7 in. (26.5 x 128 x 93.4 mm)Surround speaker Module: 3.6 x 3.5 x 4.15 in.(92 x 90 x 105.5 mm)Weight Transmitter: 5.3 oz. (0.15 kg)Receiver: 5.6 oz. (0.16 kg)Battery 3V lithium battery (CR2025)Inputs AUX (3.5 mm stereo audio) jackDigital optical audio jackPROBLEM POSSIBLE SOLUTIONSNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 19 Monday, May 22, 2017 8:46 AM
20NS-HURSK18www.insigniaproducts.com• Consult the dealer or an experienced technician for help.FCC warningChanges or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.Canada IC statementThis device complies with Industry license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Ce dispositif est conforme à la norme de l'industrie RSS exempts de licence (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif."This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.Cet équipement est conforme à l'exposition aux rayonnements IC limites établies pour un environnement non contrôlé.NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 20 Monday, May 22, 2017 8:46 AM
21Universal Rear Speaker Kitwww.insigniaproducts.comONE-YEAR LIMITED WARRANTYDefinitions:The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at www.bestbuy.com or www.bestbuy.ca, and is packaged with this warranty statement.How long does the coverage last?The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product.What does this warranty cover?During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.How to obtain warranty service?If you purchased the Product at a Best Buy retail store location, please take your original receipt and the Product to any Best Buy store. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from a Best Buy online web site (www.bestbuy.com or www.bestbuy.ca), mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY. Call agents may diagnose and correct the issue over the phone.Where is the warranty valid?This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the county where the original purchase was made.What does the warranty not cover?This warranty does not cover:• Customer instruction/education•Installation•Set up adjustments•Cosmetic damage• Damage due to weather, lightning, and other acts of God, such as power surges•Accidental damage•Misuse•Abuse•NegligenceNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 21 Monday, May 22, 2017 8:46 AM
22NS-HURSK18www.insigniaproducts.com• Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home.• Modification of any part of the Product, including the antenna• Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).• Damage due to incorrect operation or maintenance• Connection to an incorrect voltage or power supply• Attempted repair by any person not authorized by Insignia to service the Product• Products sold “as is” or “with all faults”• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)• Products where the factory applied serial number has been altered or removed• Loss or Theft of this product or any part of the product• Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that may not function normally.)• Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.Contact Insignia:For customer service please call 1-877-467-4289www.insigniaproducts.comINSIGNIA is a trademark of Best Buy and its affiliated companies.Distributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richfield, MN 55423 U.S.A.©2017 Best Buy. All rights reserved.Made in ChinaNS-HURSK18_17-0287_MAN_V1_ENG.fm Page 22 Monday, May 22, 2017 8:46 AM
www.insigniaproducts.com1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)INSIGNIA is a trademark of Best Buy and its affiliated companies.Distributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richfield, MN 55423 U.S.A.©2017 Best Buy. All rights reserved.Made in China.V1 ENGLISH17-0287NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 23 Monday, May 22, 2017 8:46 AM

Navigation menu