Cabco Group 2008-STAND SHOPPING KART CONTROLLER SYSTEM User Manual 2008 Controllers kart managers guide

Cabco Group SHOPPING KART CONTROLLER SYSTEM 2008 Controllers kart managers guide

USERS MANUAL

Kart Managers Guide 2008 Generation III Controllers
Contents Section 1-Controller hardware descriptions Section 2-Service mode functions and screen shots Introduction This document describes the new controller hardware items and shows the new functionality of the service mode. All other general kart functions remain the same. • No unauthorised modifications to the equipment are allowed. • Such modifications may cause radio and television interference which could void the user’s authority to operate this equipment.
Section 1 Generation III Controller- Hardware Items Each controller is housed in a die cast aluminum box. There are between 2 & 4 circuit boards contained in each controller box depending on the required use and specification. Stand Controller The stand controller has 3 circuit boards. The controller is powered by a 24v supply. On the left is the main controller with built in 2.4Ghz RF module. On the right is the digital media player which supports both SD & CFC. The small middle PCB supports a printer interface.
The connectors on the stand controller from left to right are: 1. 2-way power supply 2. 6-way for future hardware 3. 8-way for future hardware 4. 12-way connector for service mode button, 7” LCD power + audio and stand soft key buttons. 5. Lower connector is Data cable to Harvest 6. Upper connector is printer. 7. RF antenna port 8. RCA video output
The stand houses a 7” LCD monitor similar to the children’s and the media monitors. Mounted either side of the monitor are 6 switches called “soft keys”. These switches are mounted on small circuit boards with connectors to the stand controller. These connectors can be used on either left or right circuit board. The monitor is connected to an 8-way DIN cable which has RCA connectors to the stand controller. The red video 3 connector is not used & the white audio RCA may/not be used depending on the end application.
Kart Controller A kart controller incorporating a media monitor will contain 4 separate circuit boards. 1. Main kart board incorporating a 2.4Ghz RF module 2. Children’s digital media player 3. Media monitor DMP. 4. Battery charging board. A controller may be made with just the children’s DMP. The battery charging board will differ for IPT & contact charging.
The connectors on a kart controller from left to right are: 1. Top 4 –way is the power connector 2. Left side 6-way is the trunk LED & future “gas gauge” 3. 12-way mini fit is for the brakes 4. 12-way micro fit is for 2x monitor DIN connectors, 2x monitor audio (RCA or spade) and 2 pin connector to the media monitor switches. 5. 8-way connector to brake release & sensor 6. 10-way for future hardware 7. 2.4Ghz RF antenna 8. top yellow RCA is for media monitor 9. lower yellow RCA is for children’s monitor
On the right side of the controller , with the connectors facing you, there are slots for the media cards. The children’s DMP is the lower slots, we use a CFC for this. The media monitor is the top slot, we use an SD card on this.
Section 2-Cabco Stand Service Mode Screens Generation III controllers Service mode is entered by pressing the service mode button which is found on the inside roof of the lower section of the Kart Pay Station.(same as tvkart V1) Service mode allows access to any cash totals, kart set up, store settings and media settings. The following screen shots show the detail of all functions. Main Menu Page 1 Welcome to Service mode. Select an option… ? Free Hire Exit ? ? Unhire Cash Settings ? ? Stand Summary More ? Free Hire-starts a kart on “hire mode”-used to start a hire & to test a kart Unhire-stops a kart already in “hire mode” Stand Summary-shows cash and software running in stand Exit- exits to “public menu” Cash settings-shows cash and onto clear cash screens More- moves to the next Service main page 2
Unhire a Kart Select an option… ? Next Exit ? ? Kart 1 ? ? Kart 2 ? Stand Summary Total : $0.00/0 Recent : $0.00/0 In cash Box : $0.00 Exit ? Total Hires : 1 Free Hires : 1 Software Ver 3.09 185D Ver 3.02 Cash Settings Cash Box : $0.00/0 Exit ? ? Free Hires Clear Cash Box ? ? Down Hire Cost $1.00 Up ?
Main Menu Page 2 Main Menu 2. Select an option… ? General Settings Exit ? ? Kart Control Log History ? ? Store Kart Summary More ? General Settings-displays all store “general settings” Kart control-allows control of a single kart Store Kart summary-shows the “status” of all karts in a store Exit-exits back to first page Log History-shows a simple log file of recent actions performed by the stand More-goes to next page Main menu 2 General Settings General Settings ? Find Karts enabled Exit ? ? Updates enabled Kart Delays ? ? Parent Screen enabled Volume ? Find karts enabled-will “look” for any karts in range. Updates disable/enabled-will disable or enable stand to kart code updates
Parent screen enable-turns off controller media screen Exit- exits to previous page Kart delays-enables changes all “time settings” Volume-allows changes to all volume settings Kart delays 1… ? Next Exit ? ? Down First Ad Time 60 s Up ? ? Down Time Between Ads 600 s Up ? First ad time-is the time after hire start time that the first ad plays Time between ads-is the time gap between ads playing Next-to kart delay page 2 Exit-back to first General Setting page Kart delays 2… ? Next Exit ? ? Down Mat Turn Off Time 400 s Up ? ? Down Minimum Hire Ads 600 s Up ? Mat turn off-is the time that the kart will stop a hire if it sees its still on the mat after hire Minimum hire-is the time after hire hat the sensor will turn on. Exit-goes back to General Settings main page
Next-goes to Kart delays page 3 Kart delays 3… ? Next Exit ? ? Down Park Time 120 s Up ? ? Down Up ? Park time- is the time from sensor trip to brakes on Next-goes to kart delays page 1 Exit- goes back to General settings main page Volume Control Exit ? ? Down Parent Volume 4 Up ? ? Down Child Volume 18 Up ? Parent volume-sets the media monitor volume across all karts in the store Child volume-sets the children’s monitor volume across all karts in the store Exit-goes to General settings main page Main Menu 2 Kart Control
Select a Kart ? Next Exit ? ? Kart 1 Kart 3 ? ? Kart 2 ? Next-goes to next page if you have more than 4 karts Kart 1, 2, 3-selects the chosen kart Exit-goes back to Main menu page 2 Kart 1 Setup ? Kart Config Exit ? ? State: Charging Statistics ? ? Manual Control Kart Errors ? Kart config-displays kart “in store” trunk number State-shows the current “state” of kart Manual control-allows hire/unhire of kart & code upgrades Exit-goes back to Main menu page 2 Statistics-shows kart code & full status detail Kart errors-shows recent errors in kart function Kart 1 Config
? Cancel Commit ? ? Type-NICK Parent: ON ? ? Down Number: 5 Up ? Kart 1 Status State : Charging Last Ride Time : Charge Time : 0:00:00 1:35:02 Exit Battery Volts : 13.6 V ? Battery Current : 0.0 A Charge State : 100 % Last Report Time : Mon Jan 15 21:32:46 Kart 1 Manual Control State : Charging ? In Service Exit ? ? Unhire Kart ? Maintenance Enable Upgrades ? Kart 1 Statistics Total cash : Current State Time 0.00/0 0:00:00 Exit ?
: Total Idle Time : 1:19:52 Total Out Of Service Time : Total Hire Time : 1.6 17:3 Charge Time : 0:40:38 Average Hire : 0:30:03 Hire Counter : 4/0 Utilization : 9.00 % Versions Unavailable : 0.08% ? Kart 1 Software Versions Kart Software Version : Parent DMP Version : Child DMP Version : 3.09 3E95 3.02 3.02 Exit ? Kart 1 Error Status Solenoids OK Exit ?
Main Menu page 2 Store kart summary Store Kart Summary Exit ? Kart 1 Idle-OOR Kart 2 Hired Kart 3 Charging Kart 4 Idle 71% V3.08 98% V3.08 100% V3.08 100% V3.06 More ? Shows “status” of all karts known by the stand Exit-goes back to Main Menu page 2 More-shows additional karts Main Menu page 2 Log History
Log History Exit ? Up ? Wed Jan 17 12:09:18 Kart 1 Hire Wed Jan 17 09:47:20 Kart 2 Unhire Wed Jan 17 09:06:18 Kart 2 Hire Wed Jan 17 08:36:24 Kart 2 Found Wed Jan 17 08:36:16 Kart 1 Found Wed Jan 17 08:36:26 HSN Found Wed Jan 17 08:36:16 Log Init Wed Jan 17 08:35:66 Zigbee Reset Down ? Shows recent logs of all store karts Exit-goes back to Main menu page 2
Main Menu page 2 More Welcome to Service mode. Select an option… ? Remove Kart Exit ? ? Back ? Remove kart-allows you to remove a kart from the store Remove a Kart ? Next Exit ? ? Kart 1 Kart 3* ? ? Kart 2 ?

Navigation menu