Cabletron Systems 6H128 08 Users Manual Ch1Book

2015-02-05

• Notice
• Contents
• Introduction
  • 1.1 Using This Guide
  • 1.2 Structure of This Guide
  • 1.3 6H12X-08 Overview
    • 1.3.1 Connectivity
    • 1.3.2 Full Duplex Switched Ethernet (FDSE)
    • 1.3.3 Runtime IP Address Discovery
    • 1.3.4 Management
    • 1.3.5 Remote Monitoring (RMON)
    • 1.3.6 Switching Options
    • 1.3.7 Standards Compatibility
    • 1.3.8 Year 2000 Compliant
    • 1.3.9 LANVIEW Diagnostic LEDs
  • 1.4 Local Management Features
    • 1.4.1 Broadcast Suppression
    • 1.4.2 Port Redirect Function
    • 1.4.3 Distributed Chassis Management
    • 1.4.4 SmartTrunk
  • 1.5 Optional Features
  • 1.6 Document Conventions
  • 1.7 Getting Help
  • 1.8 Related Manuals
• Network Requirements
  • 2.1 SmartTrunk
  • 2.2 10BASE-T Network
  • 2.3 100BASE-TX Network
  • 2.4 100BASE-FX Fiber Optic Network
• Installation
  • 3.1 Unpacking the 6H12X-08
  • 3.2 Installing 6H12X-08 Options
  • 3.3 Installing the 6H12X-08 into the 6C105 Chassis
  • 3.4 Connecting to the Network
    • 3.4.1 Connecting Fiber Optic Cables to Ports 1 Through 6
    • 3.4.2 Connecting a Twisted Pair Segment to the FE-100TX
    • 3.4.3 Connecting a Fiber Optic Segment to the FE-100FX and FE-100F3
  • 3.5 Completing the Installation
• Troubleshooting
  • 4.1 Using LANVIEW
  • 4.2 FE-100TX LED
  • 4.3 Troubleshooting Checklist
  • 4.4 Using the RESET Button
• Local Management
  • 5.1 Overview
  • 5.2 Local Management Keyboard Conventions
  • 5.3 Management Terminal Setup
    • 5.3.1 Console Cable Connection
    • 5.3.2 Management Terminal Setup Parameters
    • 5.3.3 Telnet Connections
    • 5.3.4 Monitoring an Uninterruptible Power Supply
  • 5.4 Accessing Local Management
    • 5.4.1 Navigating Local Management Screens
    • 5.4.2 Selecting Local Management Menu Screen Items
    • 5.4.3 Exiting Local Management Screens
  • 5.5 The Main Menu Screen
  • 5.6 Chassis Menu Screen
  • 5.7 Chassis Configuration Screen
    • 5.7.1 Setting the IP Address
    • 5.7.2 Setting the Subnet Mask
    • 5.7.3 Setting the Chassis Date
    • 5.7.4 Setting the Chassis Time
    • 5.7.5 Entering a New Screen Refresh Time
    • 5.7.6 Setting the Screen Lockout Time
    • 5.7.7 Setting the Operational Mode
  • 5.8 SNMP Community Names Screen
    • 5.8.1 Establishing Community Names
  • 5.9 SNMP Traps Screen
    • 5.9.1 Configuring the Trap Table
  • 5.10 Chassis Environmental Screen
  • 5.11 Port Redirect Function Screen
    • 5.11.1 Displaying the Source and Destination Entries
    • 5.11.2 Changing Source and Destination Ports
  • 5.12 Module Selection Screen
    • 5.12.1 Selecting a Module
  • 5.13 Module Menu Screen
  • 5.14 Module Configuration Menu Screen
  • 5.15 General Configuration Screen
    • 5.15.1 Setting the IP Address
    • 5.15.2 Setting the Subnet Mask
    • 5.15.3 Setting the Default Gateway
    • 5.15.4 Setting the TFTP Gateway IP Address
    • 5.15.5 Setting the Module Date
    • 5.15.6 Setting the Module Time
    • 5.15.7 Entering a New Screen Refresh Time
    • 5.15.8 Setting the Screen Lockout Time
    • 5.15.9 Setting the Operational Mode
    • 5.15.10 Setting the Management Mode
    • 5.15.11 Configuring the COM Port
      • 5.15.11.1 Changing the Com Port Application
    • 5.15.12 Clearing NVRAM
    • 5.15.13 Enabling/Disabling IP Fragmentation
  • 5.16 SNMP Community Names Screen
    • 5.16.1 Establishing Community Names
  • 5.17 SNMP Traps Screen
    • 5.17.1 Configuring the Trap Table
  • 5.18 Switch Configuration Screen
    • 5.18.1 Setting the STA
    • 5.18.2 Setting the Age Time
    • 5.18.3 Setting (Enabling or Disabling) the Port Status
  • 5.19 Ethernet Interface Configuration
    • 5.19.1 Configuring an FE-100FX/F3 Interface or a Port 7 or 8 FE-100FX/F3 Interface
    • 5.19.2 Configuring an FE-100TX Interface
    • 5.19.3 Setting the FE-100TX Operational Mode
    • 5.19.4 Setting the FE-100TX Advertised Ability
  • 5.20 Module Specific Configuration Menu
  • 5.21 System Resources Screen
    • 5.21.1 Setting the Reset Peak Utilization
  • 5.22 Flash Download Screen
    • 5.22.1 Image File Download Using TFTP
    • 5.22.2 Image File Download Using RUNTIME
    • 5.22.3 Image File Download Using BootP
  • 5.23 Port Redirect Function Screen
    • 5.23.1 Displaying the Source and Destination Entries
    • 5.23.2 Changing Source and Destination Ports
  • 5.24 Broadcast Suppression Screen
    • 5.24.1 Setting the Threshold
    • 5.24.2 Setting the Reset Peak Switch
  • 5.25 Module Statistics Menu Screen
  • 5.26 Switch Statistics Screen
    • 5.26.1 Using the Clear Counters Command
  • 5.27 Interface Statistics Screen
    • 5.27.1 Displaying Interface Statistics
    • 5.27.2 Using the Clear Counters Command
  • 5.28 RMON Statistics Screen
    • 5.28.1 Displaying RMON Statistics
    • 5.28.2 Using the Clear Counters Command
  • 5.29 Network Tools
    • 5.29.1 Built-In Commands
    • 5.29.2 Special Commands
• Specifications
  • A.1 Device Specifications
  • A.2 Physical Properties
  • A.3 Environmental Requirements
  • A.4 Input/Output Ports
  • A.5 COM Port Pinout Assignments
  • A.6 Regulatory Compliance
• FE-100TX, FE-100FX and FE-100F3 Specifications
  • B.1 FE-100TX
    • B.1.1 Auto-Negotiation
  • B.2 FE-100FX
  • B.3 FE-100F3
• Optional Installations and Mode Switch Bank Settings
  • C.1 Required Tools
  • C.2 Setting the Mode Switch
  • C.3 Installing Optional Fast Ethernet Interface Modules
• Index
  • Numerics
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U