Cabletron Systems Esx 1320 Users Manual

2015-02-05

• Title Page
• Notice
• Contents
• Introduction
  • 1.1 Using This Manual
  • 1.2 Features
  • 1.3 Document Conventions
  • 1.4 Related Manuals
  • 1.5 Getting Help
• Controls and Indicators
  • 2.1 LANVIEW LEDs
  • 2.2 RESET Button
  • 2.3 LCD Display
  • 2.4 Network Management Capabilities
  • 2.5 Simplex or Full Duplex Mode Operation
• Installation
  • 3.1 Unpacking the ESX
  • 3.2 Removing the Chassis Cover
  • 3.3 Setting Mode Switches
  • 3.4 NVRAM Reset Switch
  • 3.5 SIMM Upgrades
    • 3.5.1 Locating SIMMs
    • 3.5.2 Installing SIMMs
  • 3.6 BRIM Connection
  • 3.7 Installing the ESX
    • 3.7.1 Tabletop or Shelf Installation
    • 3.7.2 Rackmount Installation
    • 3.7.3 Connecting to the Power Source
  • 3.8 Pre-Network Installation Test
  • 3.9 Connecting to the Network
    • 3.9.1 Connecting a Twisted Pair Segment to the 3.9...
    • 3.9.2 Connecting a 10BASEF Segment to the ESX-138...
• Troubleshooting
  • 4.1 Using LANVIEW
  • 4.2 Troubleshooting Checklist
  • 4.3 Using the RESET Button
  • 4.4 Using the LCD
    • 4.4.1 Unsaved Initialization Messages
    • 4.4.2 Static System Messages
    • 4.4.3 Alarm Messages
    • 4.4.4 Saved System Messages
    • 4.4.5 Failure or Error Messages
• Specifications
  • A.1 Functionality
  • A.2 COM Port 1 and COM Port 2
  • A.3 Environmental Requirements
  • A.4 Regulatory
  • A.5 Physical Properties
  • A.6 Electrical Specifications
• Ethernet Cabling Requirements
  • B.1 Network Requirements
  • B.2 10BASE-T Twisted Pair Network
  • B.3 Multimode Fiber Optic Network
• Index