Cadent ED03586 Wireless Dongle for Foot Pedal User Manual

Cadent Ltd. Wireless Dongle for Foot Pedal

User Manual

                       iTero HDU  Optical Impression Device for Intra-Oral Digital Impression  Operation Manual        Wireless Dongle for Foot Pedal  FCC ID: UZ2ED03586  September 2011 OPERATION MANUAL
iTero HDU Operation Manual  Wireless Dongle for Foot Pedal  2  Publication EA03586-A  Wireless Dongle for Foot Pedal Maintenance  Replacing Wireless Dongle in HDU Cart Preparation   Turn OFF the machine   Turn OFF the UPS   Disconnect the machine from the AC power source. Right panel removal   Use a long T shaped 3mm Allen wrench to open the two screws holding the right side panel, and remove the panel.   Replace wireless dongle with new one and close the cover.      CAUTION:  Be sure to follow local governing ordinances and recycling instructions regarding disposal or recycling.  CAUTION: Refer all servicing to qualified service personnel.
English  iTero HDU Operation Manual  Publication EA03586-A  3  FCC Radio frequency interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    Reorient or relocate the receiving antenna.    Increase the separation between the equipment and receiver.    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.    Consult the dealer or an experienced radio/TV technician for help.   Cadent Ltd. is not responsible for any radio or communication interference caused by using other than specified or recommended cables and battery or by unauthorized changes or modifications to this equipment. Unauthorized changes or modification could void the user’s authority to operate the equipment.   This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:   1. This device may not cause harmful interference, and   2. This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu