Cadi Scientific STG-836 SmartTAG User Manual STG836

Download:
Mirror Download [FCC.gov]
Document ID	1840366
Application ID	zJu1asmZlVsfPu/u/7DLbw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.46kB (80793 bits)
Date Submitted	2012-11-19 00:00:00
Date Available	2012-11-21 00:00:00
Creation Date	2012-11-12 14:13:09
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-11-12 14:13:09
Document Title	Microsoft Word - STG836 User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Cherry-ec_Chen

STG-836
Instruction Manual
WARNINGS
For customer in the U.S.A and Canada
•
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
•
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
•
Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that
may cause undesired operation of the device.
•
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
•
The lithium coin battery inside this product contains Perchlorate. The
following statement is required by the State of California, USA:
Perchlorate Material – special handling may apply.
For customer in Europe
•
This equipment has been tested and found to comply with the limits set out
in the R&TTE Directive.
•
Where you see this symbol on any of our electrical products/packaging in
Europe, it means that at end of life the product/battery must be disposed of
in accordance with any applicable laws or requirements for the separate
disposal of electrical equipment/batteries.
•
The manufacturer of this product is CADI Scientific Pte Ltd, 31 Ubi Road 1,
#03-00 Aztech Building, Singapore 408694.
PRECAUTIONS








Keep batteries away from children.
Do not swallow batteries.
Do not throw batteries into water.
Do not throw batteries into fire.
Do not short-circuit batteries.
Do not recharge batteries.
Do not replace battery with incorrect. Incorrect type of battery replacement
may cause risk of exposure.
Battery should be dispose according to the instructions
SPECIFICATIONS
Power
Dimension
Operating temperature
Transmission frequency
Power 3V DC, CR2032 Lithium coin cell
33.9mmx30mmx12.8mm
20°C - 50°C
868.4 MHz (For customer in Europe)
919.8 MHz (For customer in U.S.A)
925.0 MHz (For customer in U.S.A)
USAGE
Switching on STG-836
• STG-836 will turn on automatically and start operating once the battery
is inserted.
Inserting battery
1.
Turn over STG-836 and unscrew the 4 screws.
2.
Lift the bottom cover away from the top cover.
3.
Pull the battery out from the holder.
4.
To replace a new battery, slide the battery into the battery holder from the
position as shown on picture below. Make sure the positive side of battery is facing up.
Slide battery from this side
Positive Side of battery facing
-up
5.
Lastly, tighten the casings with the 4 screws

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Cherry-ec_Chen
Create Date                     : 2012:11:12 14:13:09+08:00
Modify Date                     : 2012:11:12 14:13:09+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - STG836 User Manual.doc
Creator                         : Cherry-ec_Chen
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:8bb56f24-a33b-400f-910a-6b7add5fcba8
Instance ID                     : uuid:de82f81b-5656-4bf7-8374-70a24b2f60ec
Page Count                      : 5

EXIF Metadata provided by EXIF.tools