Cadi Scientific STG-856 STG-856 Mother Tag User Manual STG856

Cadi Scientific Pte. Ltd. STG-856 Mother Tag STG856

user manual

Download: Cadi Scientific STG-856 STG-856 Mother Tag User Manual STG856
Mirror Download [FCC.gov]Cadi Scientific STG-856 STG-856 Mother Tag User Manual STG856
Document ID1811938
Application IDmZIeLpc0vA3A9mcw152XCg==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.85kB (10626 bits)
Date Submitted2012-10-11 00:00:00
Date Available2012-10-11 00:00:00
Creation Date2012-10-04 18:36:04
Producing SoftwareAcrobat Distiller 10.1.4 (Windows)
Document Lastmod2012-10-04 18:36:11
Document TitleMicrosoft Word - STG856 User Manual.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: Judy_Hsu

STG-856
Instruction Manual
WARNINGS
For customer in the U.S.A and Canada
•
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
•
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
•
Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that
may cause undesired operation of the device.
•
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
•
The lithium coin battery inside this product contains Perchlorate. The
following statement is required by the State of California, USA:
Perchlorate Material – special handling may apply.
For customer in Europe
•
This equipment has been tested and found to comply with the limits set out
in the R&TTE Directive.
•
Where you see this symbol on any of our electrical products/packaging in
Europe, it means that at end of life the product/battery must be disposed of
in accordance with any applicable laws or requirements for the separate
disposal of electrical equipment/batteries.
•
The manufacturer of this product is CADI Scientific Pte Ltd, 31 Ubi Road 1,
#03-00 Aztech Building, Singapore 408694.
PRECAUTIONS
• Keep batteries away from children.
• Do not swallow batteries.
• Do not throw batteries into water.
• Do not throw batteries into fire.
• Do not short-circuit batteries.
• Do not recharge batteries.
SPECIFICATIONS
Power
Dimension
Operating temperature
Transmission frequency
Power 3V DC, CR2477 Lithium coin cell
40mmx40mmx17mm
20°C - 50°C
868.4 MHz (For customer in Europe)
919.8 MHz (For customer in U.S.A)
925.0 MHz (For customer in U.S.A)
USAGE
Switching on STG-85X
• STG-85X will turn on automatically and start operating once the battery
is inserted.
Inserting battery
• Turn over STG-856 and unscrew the 4 screws.
• Lift the bottom cover away from the top cover.
• Pull the battery out from the holder and replace it with a new one.
• Screw

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Judy_Hsu
Create Date                     : 2012:10:04 18:36:04+08:00
Modify Date                     : 2012:10:04 18:36:11+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Microsoft Word - STG856 User Manual.doc
Creator                         : Judy_Hsu
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:10:04 18:36:11+08:00
Producer                        : Acrobat Distiller 10.1.4 (Windows)
Document ID                     : uuid:2eefef59-48a7-4465-bdf9-c5a4e490dc9a
Instance ID                     : uuid:9c77301b-262e-4643-bd73-8f09ac454af7
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VPE-STG-856

Navigation menu