Cal Comp Electronics BT5000 BLUETOOTH HEADSET User Manual w W

Download:
Mirror Download [FCC.gov]
Document ID	477152
Application ID	grfx9mFLa29L9XgYPRcz2g==
Document Description	USERS MANUAL 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.9kB (2011196 bits)
Date Submitted	2004-10-07 00:00:00
Date Available	2004-10-07 00:00:00
Creation Date	2004-09-13 11:33:17
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2004-10-07 17:30:45
Document Title	¦w³W»{ÃÒ.cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	@@

Preface Appearance Description
Introduction
Bluetooth technology is a new generation wireless communication system, which
consumes low power and transmits data among different products Within a short
distance; thus, Bluetooth wireless communication device will connect various
digital devices without any wired transmission circuit ~ Your Bluetooth headset
can communicate with other Bluetooth devices Within 10 meters (33 feet) . a / ~,7 5
1.Indicator Light: Provides visual cue about headset status.
Nola : Bluetooth headset simultaneously supports both Hs and HF pmflles to match more product . .
iunctionalities and compatibities 2.Volume down key : Adjusts speaker (receive) volume down.
Specification 3.Volume up key :Adjusts speaker (receive) volume up.
_ . . 4.Multi-function button (MFB) : Controls several headset functions.
' Product feature . Wireless transmission.
. Talk time : less than 6 hours. 5.Microphone : Picks up your vouce input.
. Standby time : less than 150 hours. 6.Speaker : Plays the sound you receive on the call.
. Effective range : 10 meters. 7.Earhook : Attaches headset to ear.
~ Compatible headset: Headset supporting HS/HF profile. 8.Charging : Connects the plug to your battery charger.
9.Trimming hole : Connects the trimming to the trimming hole.
Charging
Introduction
Before yourfirst time using Bluetooth headset, please charge for 24 hours to
make sure that your headset is fully charged. Aftentvard, if you hear five short
tones from the headset every 20 seconds, that means that your battery is running
low and should be immediately charged for 1 ~ 1.5 hours. However, please not
charge your headset over 24 hours again.
Note : After you use your headset tor a white, the battery will gradually deteriorate and then cause
the charging time to increase; this is a normal phenomenon The more you use your headset,
the less the standby time will be =
How to charge
Plug the charger into the charging port. While headset' ts being charged, the
indicator light' ts lighting up.
SETUP 2
After headset is fully charged, the indicator light will be off ; at this time you can
remove the charger from the outlet and remove charger from headset.
Not. : Only by certified service engineer can the battery be dismantled or replaced. lithe headset
is under appropriate use, the battery will work fora long time New battery or the one, which
has not been used for a long time, will possess lower electricity capacity in the first few uses
Turning the Headset On or Off
Turning on the Headset
Simultaneously press both the multi-function button ( MFB ) and volume up / down
button for more than 2 seconds; then the indicator light on Bluetooth headset will
light up. After 3 seconds. the indicator light will start blinking and you can use your
headset now.
Turning off the Headset
Simultaneously press both the multi-function button ( MFB ) and volume up / down
button for more than 2 seconds until you see the indicator light changes from
blinking to lighting; then Bluetooth headset will be of! immediately s
Pairing your Headset and Phone
First, you have to make sure that your phone is Bluetooth-suppcned, and then
put your phone and headset within the effective range (10 m) to make them enter
pairing mode.
1. Turn on both your headset and phone.
2. Press volume-up or volume-down button for 2 seconds until the indicator light
lights up. This means that both devices enter pairing mode.
3. Select " Helios ” from the phone screen to pair headset and phone.
4. Afterward, you will be asked to enter the password = Please enter 0000. If pairing
is successful, the indicator light on headset will rapidly blink 5 times.
5. If you want to leave the pairing mode, please press the side button ( volume-up
or volume-down ) for 2 seconds until the indicator light is blinking -
Note : lfyour Bluetooth headset can't search the headset within 1 minute, this means that the pairing
is unsuccessful Please repeat the stated procedures above

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:09:13 11:33:17Z
Modify Date                     : 2004:10:07 17:30:45+08:00
Page Count                      : 3
Has XFA                         : No
Creation Date                   : 2004:09:13 11:33:17Z
Mod Date                        : 2004:10:07 17:30:45+08:00
Producer                        : Corel PDF Engine Version 9.397
Author                          : @@
Metadata Date                   : 2004:10:07 17:30:45+08:00
Creator                         : @@
Title                           : ¦w³W»{ÃÒ.cdr

EXIF Metadata provided by EXIF.tools