CalAmp Wireless Networks VLU-07 Vehicle Recovery Transceiver, ITU7 User Manual

LoJack Corporation Vehicle Recovery Transceiver, ITU7 Users Manual

Contents

Users Manual

Technician Reference Material- Connect LoJack
Application To ITU-7 Tester
LoJack Confidential and Proprietary LoJack Corporation 40 Pequot Way, Canton, Massachusetts 02021
Connecting an ITU-7 to the LoJack application must be performed to test a product. The following
instructions will show users how to:
1. Download an application to their mobile device
2. Connect the mobile device to an ITU-7 using a Wi-Fi connection
3. Performing a test of a stolen vehicle recovery unit (SVRU)
Downloading The Application
1) Download the LoJack application using the link below (update link in March 2013)
https://instappstage.lojack.com/LojackMITInstaller/download.html
iOS Apple Download or Android Download Options
Once the application is installed on the i-phone 4,4S, 5, 5S, i-pad, i-touch or Droid the LoJack
icon will be displayed (icon sample above)
Connecting The Mobile Device To ITU-7
2) Turn the ITU-7 on by pressing the push button located on the ITU-7 or by plugging the ITU-7
into the supplied AC power supply or DC accessory cord. The small LED located on the ITU-7
will illuminate solid green once the unit turns on (emitting Wi-Fi signal). LED will be on
constant if charging or on for 30 minutes if not charging.
A. On the mobile device open ‘settings’ and go to wireless connections. Confirm Wi-Fi is set
for on. The signal from the ITU-7 will be displayed as ITU7-_ _ _ __. The four numbers
proceeding i.e. 1482 will match the serial number of the ITU-7 you plan on using for
product testing. The unique serial number can also be found on the bottom of the ITU-7.
B. Next select the Wi-Fi (ITU-7) you want to use by selecting it from the list. Important:
take notice that the symbol showing it is in the process of connecting will not display as a
check mark, but if you review the ITU details of the connection you will notice your IP
address and Subnet Mask information has been populated when connected (example
below).
C. Once a connection has been established with the ITU-7 proceed with opening the LoJack
application to conduct product testing.
FCC Information For ITU-7
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Technician Reference Material- Connect LoJack
Application To ITU-7 Tester
LoJack Confidential and Proprietary LoJack Corporation 40 Pequot Way, Canton, Massachusetts 02021
Performing Product Testing
1) Click on the LoJack application icon.
2) Once the LoJack application opens the user will be prompted to login using their unique ID
and Password which is provided by LoJack management. Important: If this is the first time
the application is being opened after downloading you must have an active internet
connection using 4G or Wi-Fi. Once your login credentials have been verified and cash files
are downloaded (60 seconds), the application can be used off line.
3) Select ‘Settings’ from the main menu to proceed to ‘ITU Direct Test’. Note: Direct test is
used by installers or management to conduct product tests only. This feature is not used
by installers to test products that need to be registered. The main menu options displayed
below will vary depending on user profile.
4) The direct ITU testing screen will allow users to enter the information for products that
need to be tested, but the IP address and Port information will be prepopulated.
5) Enter the product code for the product being tested i.e. SL7, VL7, S7E, V7E, VL5, V5E
6) Next enter the seven digit serial number for the product i.e. 0B41766. The user can also
select the scan option to scan the product barcode (sample below).
7) Once all information is entered and the SVRU product is connected (installed), the user
must select the ‘Begin ITU’ test option from the lower right corner. Note: selecting
‘Submit’ will upload the test results to LoJack if necessary.
8) The screen will display connecting ITU while it is performing the product test.
9) If the product functions it will provide the application with results following two slow
flashes of the LED located on the ITU-7. Results displayed in red are not acceptable for a
new product installation. All results displayed in green are acceptable for a new product
installation.

Navigation menu