CalAmp 520004-1 MDS-MMDS Transceiver User Manual standalone guide pg 1
CalAmp Corp. MDS-MMDS Transceiver standalone guide pg 1
CalAmp >
Contents
standalone guide pg 1
Eézflfififimiéz g AWE/WM INSTALLATION INSTRUCTIONS INIEGRAIED IRANSCfIVfR (SIANDALONZ) REFER TO SHEET 2 FOR THE FOLLOWING INSTRUCTIONS. ® INSTALL BRACKET ITEM 4 AS SHOWN. BRACKET TO BE POSITIONED BETWEEN THE TWO RIBS ON THE FRONT HOUSING. INSTALL L—BOLT ITEM 3 AS SHOWN. ORIENT UNIT SO THAT THE FCC RF EXPOSURE WARNING LABEL IS FACING THE FRONT OF THE ANTENNA. FCC WARNING LABEL IS NOT OBSTRUCTED WHEN INSTALLATION IS COMPLETED. ADJUST UNIT TO CORRECT HEIGHT AND HAND TIGHTEN LfBOLT SNUG THEN ONE FULL TURN. ENSURE UNIT DOES NOT ROTATE ON POLE. 2. NOTE TO INSTALLER: INSTALLATION AND OPERATION OF THIS FAMILY OF TRANSCEIVER PRODUCTS REQUIRE FULL COMPLIANCE WITH FCCPADOPTED RADIO FREQUENCY EXPOSURE LIMITS. IT IS IN THE RESPONSIBILITY OF THE INSTALLER TO INSTALL THESE DEVICES AND THEIR ASSOCIATED ANTENNAS SO THAT RF EXF'OSURE DOES NOT EXCEED ‘I.OrrIW/cm2, THE FOLLOWING TABLE SUMMARIZES THE MINIMUM DISTANCE REQUIRED TO SATISFY THESE REQUIREMENTS PART NUMBER LIMITS. MINIMUM (WHEN USED WITH 24 dBI ANTENNA GAIN) 5200057I 26IN.(66 CM) 5200047I 48 IN. (I22 CM] MOUNT HARDWARE ITEMS I3‘I4‘I7 MOUNTING BRACKET 3 SI ‘I78 L BOLT 2 NONE MOUNTING TUBE ZOOfi (CUSTOMER SUPPLIED) I INTEGRATED TRANSCEIVER STANDARD SHEET 1 OF 2 USED ON: INTEGRATED MDSHMMDS TRANSCEIVER ECO N0. XXXXX I3I5I7/E
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2000:04:26 07:44:10 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2000:04:26 07:44:12-04:00 Page Count : 1EXIF Metadata provided by EXIF.tools