CalAmp 520006 Wireless Cable Modem Transceivers, 520006-1 & 5200 User Manual Page 1 of installation instructions
CalAmp Corp. Wireless Cable Modem Transceivers, 520006-1 & 5200 Page 1 of installation instructions
CalAmp >
Contents
- 1. User manual
- 2. Page 1 of installation instructions
- 3. transceiver installation guide
Page 1 of installation instructions
(CEIITTZFETIITITTIT’EI g Ampflififiéf INSTALLATION INSTRUCTIONS INTEGRATED PLANAR TRANSCEIVER REFER TO SHEET 2 AND 3 FOR THE FOLLOWING INSTRUCTIONS. ® INSERT BRACKET HANDLE ITEM 4 INTO APPROPRIATE SLOTS ON PIPE CRADLE. INSTALL LffiOLT ITEM 3 AS SHOWN. ADJUST PIPE TO CORRECT HEIGHT AND TICHTEN LfBOLT. NOTE: PROCEDURE TO TIGHTEN LiBOLT I. SNUG FIT THE LfBOLT SO THAT THE PLANAR ANTENNA DOES NOT MOVE DUE TO ITS CRAVITATIONAL WEIGHT. 2. TICHTEN L780LT ADDITIONAL I ‘I/2 TURNS FROM THE SNUC FIT POSITION. SEE SHEET 2 FOR HORIZONTAL POLARIZATION SEE SHEET 2 FOR VERTICLE POLARIZATION >®® NOTE TO INSTALLER: INSTALLATION AND OPERATION OF THIS FAMILY OF TRANSCEIVER PRODUCTS REQUIRE FULL COMPLIANCE WITH FCCfADOPTED RADIO FREQUENCY EXPOSURE LIMITS. IT IS IN THE RESPONSIBILITY OF THE INSTALLER T0 INSTALL THESE DEVICES AND THEIR ASSOCIATED ANTENNAS SO THAT RF EXPOSURE DOES NOT EXCEED LDmW/cmZ THE FOLLOWING TABLE SUMMARIZES THE MINIMUM DISTANCE REQUIRED TO SATISFY THESE REQUIREMENTS. PART NUMBER LIMITS, MINIMUM (WHEN USED WITH I7 dE'I ANTENNA GAIN) 520007f2 22 IN. (55 CM) 520024—2 22 IN. (55 CM) 52000472 22 IN. (55 CM) 520006—2 22 IN. [55 CM) MOUNT HARDWARE ITEMS IBI TBS BRACKET HANDLE 3 31178 L BOLT 2 NONE MOUNTING TUBE (CUSTOMER SUPPLIED) I PLANAR TRANSCEIVER SHEET ‘I OF 2 USED ON: PLANAR TRANSCEIVER ECO: 58955 I31321/D
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2000:09:06 20:30:50 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2000:09:06 20:30:51-04:00 Page Count : 1EXIF Metadata provided by EXIF.tools