Calford Technology AF622 6 channel FM wireless intercom User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2188968
Application ID	ssnvROYDMjlPoaFqUWedLg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	192.59kB (2407356 bits)
Date Submitted	2014-02-13 00:00:00
Date Available	2014-02-13 00:00:00
Creation Date	2013-12-31 11:22:26
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2013-12-31 11:22:26
Document Title	图形1
Document Creator	CorelDRAW
Document Author:	Administrator

Troubleshooting Guide
Problem Possible Solution
Power indicator does not turn on. — Check the AC powercord; is it
connected properly?
— Rotate VOLUME clockwise until it
'clicks" to turn unit on.
— ls intercom set to designated channel?
— Release TALK when not talking.
— If the intercom is locked, release lock by
pressing TALK or CALL.
— FIotate VOLUME clockwise to
increase sound level.
Cannot receive response.
— Are both intercoms set to the same
channel?
— Wail until other user has finished
talking.
Cannot talk to other intercom.
strong. continuous "beep" sound. — Move intercoms further apart to
eliminate audio feedback.
Unit doesn't work. — Try units in a diIIerent location. II the units
work in a difterent location but not in your
home. there is a problem with your home
concrete wall.
INSTRUCTION MANUAL
AF622
6-CHANNEL FM WIRELESS INTERCOM
Thanks Ior purchasing this S-channel FM wire-
less intercom Model AF622. This is an "IN-
sTANT' intercom system. Simply plug the
intercom into standard AC outlets. and you're
readyto send and receive calls orto monitor
the room where the stations are installed. All
the salety and operating instructlon should be
read belore the appliance is operated and re-
tained for Iuture relerence.
Features
The intercoms use radio lrequencies (452-467 MHz)
called channels to communicate with each other.
Operation range (line orsight) -- -- 200 teel
Call tone —alens otherstations belore you start
talking.
Lock —|ets you set the intercom for monitoring
orotherone-way communication.
Talk indicators — light to let you know when you
are transmitting to other stations.
S-channel Switch 7 lets you choosethe stations
you want to communicate with.
Channel (Button) — light to showyou thatthe
stations are on.
Power Ac adapter only. You must use a Class
2 power source that supplies regulated 6 v no
and delivers at least 800 mA. Its center tip must
be set to positive and its plug must lit the intercom‘s
DC 6Vjack. Using an adapterthat does not
meet these specitlcaIions could damage Ihe
WNEL
sorrow
MID
rALK
INDICATOR
.mus out Mix ctu
Ope ratio n
Follow these steps to prepare the stations lor use.
1. To turn on the intercom, rotate VOLUME
Clockwise until it Clicks. The CHANNEL (But-
ton) lights. Set VOLUME to mid-range.
2. Set CHANNEL and CALLING tor each sta-
tion to the appropriate channel, as lollows:
* If you want all the stations to communicate
with each otherat the same time. set all sta-
tions to the same channel.
‘ ll you want to setup separate communica-
tion systems, set each station to a different
channel.
Forexample. at home you could setthe
kiIchen's staIion to channel 1, the Iamily
room‘s station to Channel 2, the bedroom's
station to Channel 3, and the garage to
Channeld. The kitchen can communicate
with the family room by setting CHANNEL
to 2 and with the bedroom by setting
CHANNEL to 3. Writes names on Stations
intercoms or the adapter. Always connect the Label
5 ill ti n r t i l‘ indivld l nit mi htv r s ifi ti n r b' t AC adap‘e's'mem'emms be'°'°y°"°°""e°' I
p" ca ° s-a e yp ca, _ ua " _ 5 9 a V' p” ca 0 s a e s“ J" themtoAc power. When you linisli,disconnect t 2 a 4
‘0 change and "“P'DVWWM Within” "0“99- the adapterstrom AC power belore you disc- KITCHEN ROOM BEDROOM GARAGE
onnect them lrom theintercoms. .
Calling
FHS Frequencies: WALL MOUNT Follow these steps to talk to another station.
Channel Frequency Channel Frequency 'NSTALLATION 1. PRESS CHANNEL button to the channe|(1,
(MHZ) (MHZ) 2, a or 4) ol the station you are calling.
T 2 Press CALL The talk indicator li ht E h
1 462.5625 6 462.6375 ' . ' 9 5' 3°
2’ltlnches station set to the selected channel sounds
2 462.5875 HELEN“) atone.
3 4525125 3. Press and hold down TALK. The talk indica-
lorlights. Speak in a normal voice.Then,
4 “2-6375 Installation release TALK when you linish speaking and
5 452-5525 You Can install your intercom almost anywhere "5'9“ (”me lesP°"Se'
there is a standard AC outlet. You can either Listening
mountthe intercoms on the wall, or place them When you hsa, a can We 0, a callers mm
KM080200A onadesktop ortabIE-Thenisimwy Plugthem adjust VOLUME to a comronable listening
in and you are ready to communicate. |eve|_
IMPORTANT NOTE: - Handle the stations gently and carelully. meed 12 months Warranty
- ONLY ONE PARTY CAN TALK ON ONE CHAN-
NEL AT A TIME.
- BE SURE To SET CHANNEL EAGKTO VOUR
DESIGNATED CHANNEL AFTER You FINISH
TALIKING so THAT OTHERS CAN EAsILv
REACH you.
Monitoring
Pressing LOCK has the same eIfect as hold-
ing down TALK. Use LOCK to set the inter
com for monitoring another station's location
(such as a nursery or playroom). or when other
one-way communication is needed.
Follow these instructlons to monitor another
location.
1. Press LOCK on the station in the area you
want to monitor.The talk indicator lights.
2. Listen rrom your station.
3. To release the lock. press TALK on the
monitored station, The talk indicator goes
out.
Note : You cannot call or talk to the locked
station while LOCK is on. Remember to re-
lease the lock when you rinish monitoring.
Using additional stations
You may add additional stations to the system.
Any G-channel intercom that transmits on the
same irequencies is compatible.
CAUTIONS
The tollowing suggestions will help you care
Ior your B-Channel FM Wireless intercom SO you
can enjoy it Ior years.
- Keep the station dry, lithe station gets wet,
wipe them dry immediately. Liquids might
contain minerals that can corrode the elec-
tronic circuits.
' Use and store the stations only in a normal
temperature environments. Temperature ex-
tremes can shorten the me of electronlc de-
vices, damage batteries, and distortor melt
plastic parts.
Dropping them can damage the circuit boards
and can cause the stations to work
improperly.
- Keep the stations away lrorn dust and din,
which can cause premature wear or pans.
- Wipe the stations with a damp cloth occa-
sionally to keep them looking new. Do not
use harsh chemicals, cleaning solvents, or
strong detergents to clean the stations.
- Modirying ortampering with the station's in-
ternal components can cause a malrunction
and might invalidate the intercom's warranty
and void your FCC authorization to operate
it. Il your intercom is not perlorming as it
should, take it to your local store Ior
assistance. ORCONTACT US AT:
e-mail:Salesflintertalk-sales.com
THE FCC WANTS YOU TO KNOW
Your intercom might cause TV or radio inter-
lerence even when it is operating properly. To
determine whether youlintercom is causingthe
intarIeranca, turn on the stations, II the inter-
terence goes away, your intercom is causing
the interlerence. Try to eliminate the
interlerence by:
~ Moving your stations away lrom the receiver.
- Connecting your stations to an outlet that is
on a dilferent electrical circuit irom the re-
Ceiver.
It you cannot eliminate the interlerence. the
FCC requires that you stop using your intercom.
Changes or madll‘ications not expressly approved by
the party responsible lor compliance could void the
user ‘ s authority to operate the equipment.
The antennas used tor this transmitter must be installed
to provide a separation distance of at least 20 cm from
all persons and must not be co-located ior operating in
conjunction with any other antenna or transmitter.
Important : Do not hold down CALL tor more than In
seconds. The FCC does noI allow you to send a
continuous tone tor more than 10 seconds at a time
on FFIS lreguencies.
This product is warranted by Seller against manufacturing defects in
material and workmanship under normal use for twolvc(12) months from the
date of purchase from Seller. EXCEPT AS PROVIDED I-HEREIN, Seller
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIESJNCLUDING THOSE OFNDERCHANTABHJTYAND
FITNESS FOR A PARTICULAR PURPOSE, ARE LINIITED 1N
DURATION TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED
HEREIN, Seller SHALL HAVE NO LIABILITY OR RESPONSIBILITY
TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH
RESPECT TO ANY LIABILITY. LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY EY USE OR PERFORMANCE OF THE
PRODUCT OR ARISH‘IG OUT OF ANY BREACH OF THIS
WARRANTY, INCLUDING, BUT NOT LIMITED TO ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF TIME. DATA.
PROPERTY, REVENUE. OR PROFIT OR ANY H‘I'DIREL'I', SPECIAL.
INCDDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN 117 Seller
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
1n the event ot'a product defect during the warranty period, talrc the product and the
sales receipt uproofofpnrchase date to Seller. ecllerwill, at its option : (a)Correct
the detecthy product repair without charge torparrs and labor: (h)replncc the
product with one otthc sum: or nimilnr design; or (c) refund the purchase price. All
rcplnocd pnrtr end products, and products on which a rcruud is madc, become the
property of Scllcr.New or rcconditionedparts andproducts may he used in the
pcrfon-nencc or warranty service. Repaired or replaced parts and products are
wamnted for the remainder of the original warranty period. You will be charged
foncpairor rcplsccmcntotthc productmadc ortcrthccxpimtion of the warranty
period.
Thirwnrrnnty does not cover; (a)damage orfailnrccauscd hy or attributable to
acts of God, abuse, accident, misuse, impropercr nhncrmnl usage, failure to follow
instrncdous,impropcr instnllnuon or mnintcnnncc, nltcrntion, lightning or other
incldcncc ofcxccss voltagc or current: (b) any repairs othsrthnu those provided by
a Seller, (c)oonsumahlcr such as tutcs or batteries: (d) cosmcric damage: (c)
transportation, shipping or insurance costs; or to costs of product removal,
installation, act—up service adjustment or zeinsulladon.
CAUTION I
The Intercom monitor it not meant to replace proper ndnlt supervision. You rhnnld check your child ‘
r activity at rcgnlnr Intcmlr at this monitor will not vim pnrcntr to the rum istiriticr or n child.
The intercom will release the LOCK nummnticnlly (the our indicator goer out) altar 2 hours monitoring,
Keep .llpnrtr oI' thir monitor nntot'rnclt at children 1
Do not mount in or on trip I
Ratings marked at the bottom cabinet of unit.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Create Date                     : 2013:12:31 11:22:26+08:00
Modify Date                     : 2013:12:31 11:22:26+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Author                          : Administrator
Creator                         : CorelDRAW
Title                           : 图形1

EXIF Metadata provided by EXIF.tools